Re: [Xen-devel] xen 4.13 + kernel 5.4.11 'APIC Error ... FATAL PAGE FAULT' on reboot? non-Xen reboot's ok.

[PGNet Dev <pgnet.dev@xxxxxxxxx>]

On 1/15/20 9:21 AM, Andrew Cooper wrote:
> That is the command line for dom0 which is a VM.  You need the Xen
> hypervisor command line.

thx. done.
 
> You'll need to edit xen-4.13.0_04-lp151.688.cfg which will be somewhere
> on the ESP (wherever that is mounted in an openSUSE system).

verifying,

        cat /boot/efi/EFI/opensuse/xen-4.13.0_04-lp151.688.cfg
                [global]

                [config.1]
                options=dom0=pvh ... reboot=a
                kernel=...

now, on restart,

        ...
        [  OK  ] Reached target Shutdown.
        [  137.682171] watchdog: watchdog0: watchdog did not stop!
        [  139.373683] watchdog: watchdog0: watchdog did not stop!
        dracut Warning: Killing all remaining processes
        mdadm: stopped /dev/md4
        mdadm: stopped /dev/md3
        mdadm: stopped /dev/md2
        mdadm: stopped /dev/md1
        mdadm: stopped /dev/md0
        Rebooting.
        [  144.908520] reboot: Restarting system
        (XEN) [2020-01-15 17:38:25] Hardware Dom0 shutdown: rebooting machine
        (XEN) [2020-01-15 17:38:25] APIC error on CPU0: 40(00)
        (XEN) [2020-01-15 17:38:25] Resetting with ACPI MEMORY or I/O RESET_REG.

and reboot proceeds ...

the error's still there, but without the trace/noise


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel