[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v3 4/4] x86/apic: allow enabling x2APIC mode regardless of interrupt remapping



x2APIC mode doesn't mandate interrupt remapping, and hence can be
enabled independently. This patch enables x2APIC when available,
regardless of whether there's interrupt remapping support.

This is beneficial specially when running on virtualized environments,
since it reduces the amount of vmexits. For example when sending an
IPI in xAPIC mode Xen performs at least 3 different accesses to the
APIC MMIO region, while when using x2APIC mode a single wrmsr is used.

The following numbers are from a lock profiling of a Xen PV shim
running a Linux PV kernel with 32 vCPUs and xAPIC mode:

(XEN) Global lock flush_lock: addr=ffff82d0804af1c0, lockval=03190319, not 
locked
(XEN)   lock:656153(892606463454), block:602183(9495067321843)

Average lock time:   1360363ns
Average block time: 15767743ns

While the following are from the same configuration but with the shim
using x2APIC mode:

(XEN) Global lock flush_lock: addr=ffff82d0804b01c0, lockval=1adb1adb, not 
locked
(XEN)   lock:1841883(1375128998543), block:1658716(10193054890781)

Average lock time:   746588ns
Average block time: 6145147ns

Enabling x2APIC has halved the average lock time, thus reducing
contention.

Signed-off-by: Roger Pau Monné <roger.pau@xxxxxxxxxx>
---
Changes since v2:
 - Cache the result of iommu_enable_x2apic so it can be used in the
   lapic suspend/resume paths.

Changes since v1:
 - Fix error paths of iommu_enable_x2apic call in x2apic_bsp_setup.
---
NB: should enabling x2APIC without interrupt remapping be limited to
running on virtualized environments?

The bigger performance benefit is indeed achieved when using x2APIC on
virt environments, but I also don't see why we wouldn't want to try
using it everywhere where it's supported.
---
 xen/arch/x86/apic.c | 94 ++++++++++++++++++++++-----------------------
 1 file changed, 45 insertions(+), 49 deletions(-)

diff --git a/xen/arch/x86/apic.c b/xen/arch/x86/apic.c
index a8ee18636f..333115bc88 100644
--- a/xen/arch/x86/apic.c
+++ b/xen/arch/x86/apic.c
@@ -44,6 +44,8 @@ static bool __read_mostly tdt_enabled;
 static bool __initdata tdt_enable = true;
 boolean_param("tdt", tdt_enable);
 
+static bool __read_mostly iommu_x2apic_enabled;
+
 static struct {
     int active;
     /* r/w apic fields */
@@ -492,7 +494,8 @@ static void __enable_x2apic(void)
 
 static void resume_x2apic(void)
 {
-    iommu_enable_x2apic();
+    if ( iommu_x2apic_enabled )
+        iommu_enable_x2apic();
     __enable_x2apic();
 }
 
@@ -695,7 +698,8 @@ int lapic_suspend(void)
 
     local_irq_save(flags);
     disable_local_APIC();
-    iommu_disable_x2apic();
+    if ( iommu_x2apic_enabled )
+        iommu_disable_x2apic();
     local_irq_restore(flags);
     return 0;
 }
@@ -860,7 +864,6 @@ void __init x2apic_bsp_setup(void)
 {
     struct IO_APIC_route_entry **ioapic_entries = NULL;
     const char *orig_name;
-    bool intremap_enabled;
 
     if ( !cpu_has_x2apic )
         return;
@@ -875,56 +878,46 @@ void __init x2apic_bsp_setup(void)
         printk("x2APIC: Already enabled by BIOS: Ignoring cmdline disable.\n");
     }
 
-    if ( !iommu_supports_x2apic() )
+    if ( iommu_supports_x2apic() )
     {
-        if ( !x2apic_enabled )
+        if ( (ioapic_entries = alloc_ioapic_entries()) == NULL )
         {
-            printk("Not enabling x2APIC: depends on IOMMU support\n");
-            return;
+            printk("Allocate ioapic_entries failed\n");
+            goto out;
         }
-        panic("x2APIC: already enabled by BIOS, but no IOMMU support\n");
-    }
-
-    if ( (ioapic_entries = alloc_ioapic_entries()) == NULL )
-    {
-        printk("Allocate ioapic_entries failed\n");
-        goto out;
-    }
 
-    if ( save_IO_APIC_setup(ioapic_entries) )
-    {
-        printk("Saving IO-APIC state failed\n");
-        goto out;
-    }
+        if ( save_IO_APIC_setup(ioapic_entries) )
+        {
+            printk("Saving IO-APIC state failed\n");
+            goto out;
+        }
 
-    mask_8259A();
-    mask_IO_APIC_setup(ioapic_entries);
+        mask_8259A();
+        mask_IO_APIC_setup(ioapic_entries);
 
-    switch ( iommu_enable_x2apic() )
-    {
-    case 0:
-        intremap_enabled = true;
-        break;
-    case -ENXIO: /* ACPI_DMAR_X2APIC_OPT_OUT set */
-        if ( !x2apic_enabled )
+        switch ( iommu_enable_x2apic() )
         {
+        case 0:
+            iommu_x2apic_enabled = true;
+            break;
+
+        case -ENXIO: /* ACPI_DMAR_X2APIC_OPT_OUT set */
+            if ( x2apic_enabled )
+                panic("IOMMU requests xAPIC mode, but x2APIC already enabled 
by firmware\n");
+
             printk("Not enabling x2APIC (upon firmware request)\n");
-            intremap_enabled = false;
+            iommu_x2apic_enabled = false;
             goto restore_out;
+
+        default:
+            printk(XENLOG_ERR "Failed to enable Interrupt Remapping\n");
+            iommu_x2apic_enabled = false;
+            break;
         }
-        /* fall through */
-    default:
-        if ( x2apic_enabled )
-            panic("Interrupt remapping could not be enabled while "
-                  "x2APIC is already enabled by BIOS\n");
-
-        printk(XENLOG_ERR
-               "Failed to enable Interrupt Remapping: Will not enable 
x2APIC.\n");
-        intremap_enabled = false;
-        goto restore_out;
-    }
 
-    force_iommu = 1;
+        if ( iommu_x2apic_enabled )
+            force_iommu = 1;
+    }
 
     if ( !x2apic_enabled )
     {
@@ -938,13 +931,16 @@ void __init x2apic_bsp_setup(void)
         printk("Switched to APIC driver %s\n", genapic.name);
 
 restore_out:
-    /*
-     * NB: do not use raw mode when restoring entries if the iommu has been
-     * enabled during the process, because the entries need to be translated
-     * and added to the remapping table in that case.
-     */
-    restore_IO_APIC_setup(ioapic_entries, !intremap_enabled);
-    unmask_8259A();
+    if ( iommu_supports_x2apic() )
+    {
+        /*
+         * NB: do not use raw mode when restoring entries if the iommu has been
+         * enabled during the process, because the entries need to be 
translated
+         * and added to the remapping table in that case.
+         */
+        restore_IO_APIC_setup(ioapic_entries, !iommu_x2apic_enabled);
+        unmask_8259A();
+    }
 
 out:
     if ( ioapic_entries )
-- 
2.24.0


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.