|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH] arch: arm: vgic-v3: fix GICD_ISACTIVER range
> Do you have a call stack trace for this? (XEN) d0v1: vGICD: unhandled read r1 offset 0x000324 (XEN) traps.c:1994:d0v1 HSR=0x93810006 pc=0xffff8000104f2bb4 gva=0xffff800010010324 gpa=0x00000051a00324 [ 1.780564] Unhandled fault at 0xffff800010010324 [ 1.785771] Mem abort info: [ 1.788899] ESR = 0x96000000 [ 1.792320] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.798196] SET = 0, FnV = 0 [ 1.801615] EA = 0, S1PTW = 0 [ 1.805124] Data abort info: [ 1.808350] ISV = 0, ISS = 0x00000000 [ 1.812620] CM = 0, WnR = 0 [ 1.815943] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000a17f6000 [ 1.823344] [ffff800010010324] pgd=000000095ffff003, pud=000000095fffe003, pmd=000000095fffd003, pte=00e8000051a00707 [ 1.835016] Internal error: ttbr address size fault: 96000000 [#1] PREEMPT SMP [ 1.842983] Modules linked in: [ 1.846403] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc5-03191-g20646f88034a-dirty #1774 [ 1.855980] Hardware name: Freescale i.MX8QM MEK DOM0 (DT) [ 1.862059] pstate: a0000085 (NzCv daIf -PAN -UAO) [ 1.867374] pc : gic_peek_irq+0x6c/0xb0 [ 1.871638] lr : gic_peek_irq+0x28/0xb0 [ 1.875899] sp : ffff80001002ba80 [ 1.879599] x29: ffff80001002ba80 x28: 0000000000000000 [ 1.885483] x27: 0000000000000000 x26: ffff800011800514 [ 1.891369] x25: 0000000000000000 x24: 0000000000000000 [ 1.897246] x23: ffff0008dc3e5400 x22: ffff0008dc3e5458 [ 1.903129] x21: ffff800011d798c8 x20: 0000000000000001 [ 1.909011] x19: ffff80001002bb07 x18: 0000000000000004 [ 1.914893] x17: ffff8000112243c0 x16: 00000000deadbeef [ 1.920780] x15: ffff0008dc01b490 x14: ffff0008dbcde5c0 [ 1.926658] x13: ffffffffffffff00 x12: ffffffffffffffff [ 1.932540] x11: 0000000000000008 x10: ffffffffffffffff [ 1.938422] x9 : c1c1c1c1c1c1c1c1 x8 : 0000000000000000 [ 1.944304] x7 : ffffffffffffffff x6 : ffff0008dc3e5458 [ 1.950186] x5 : ffff800011d798c8 x4 : 0000000000000008 [ 1.956069] x3 : 0000000000000324 x2 : fffffffffffffd03 [ 1.961951] x1 : ffff800010010324 x0 : 0000000000000300 [ 1.967835] Call trace: [ 1.970588] gic_peek_irq+0x6c/0xb0 [ 1.974481] gic_irq_get_irqchip_state+0x70/0xa0 [ 1.979607] __synchronize_hardirq+0xd8/0xe0 [ 1.984343] __free_irq+0x13c/0x2b8 [ 1.988232] free_irq+0x30/0x70 [ 1.991749] devm_irq_release+0x14/0x20 [ 1.996019] release_nodes+0x1b0/0x220 [ 2.000189] devres_release_all+0x34/0x50 [ 2.004652] really_probe+0x1b8/0x308 [ 2.008728] driver_probe_device+0x54/0xe8 [ 2.013281] device_driver_attach+0x6c/0x78 [ 2.017929] __driver_attach+0x54/0xd0 [ 2.022106] bus_for_each_dev+0x70/0xc0 [ 2.026372] driver_attach+0x20/0x28 [ 2.030359] bus_add_driver+0x178/0x1d8 [ 2.034630] driver_register+0x60/0x110 [ 2.038900] __platform_driver_register+0x44/0x50 [ 2.044121] fec_driver_init+0x18/0x20 [ 2.048294] do_one_initcall+0x74/0x1b0 [ 2.052564] kernel_init_freeable+0x194/0x22c [ 2.057403] kernel_init+0x10/0x100 [ 2.061293] ret_from_fork+0x10/0x18 [ 2.065279] Code: 53057c63 d37e6863 8b204063 8b030021 (b9400021) [ 2.072024] ---[ end trace 62c8d1d1d10ae3de ]--- [ 2.077158] note: swapper/0[1] exited with preempt_count 1 [ 2.083296] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.091659] SMP: stopping secondary CPUs [ 2.096037] Kernel Offset: disabled [ 2.099914] CPU features: 0x0002,2000200c [ 2.104371] Memory Limit: none [ 2.107788] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Regards, Peng. _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |