[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v3 15/20] hw/pci-host/piix: Define and use the PIIX IRQ Route Control Registers
The IRQ Route Control registers definitions belong to the PIIX chipset. We were only defining the 'A' register. Define the other B, C and D registers, and use them. Acked-by: Paul Durrant <paul@xxxxxxx> Reviewed-by: Aleksandar Markovic <amarkovic@xxxxxxxxxxxx> Signed-off-by: Philippe Mathieu-Daudé <philmd@xxxxxxxxxx> --- hw/i386/xen/xen-hvm.c | 5 +++-- hw/mips/gt64xxx_pci.c | 4 ++-- hw/pci-host/piix.c | 9 ++++----- include/hw/southbridge/piix.h | 6 ++++++ 4 files changed, 15 insertions(+), 9 deletions(-) diff --git a/hw/i386/xen/xen-hvm.c b/hw/i386/xen/xen-hvm.c index 95f23a263c..82ece6b9e7 100644 --- a/hw/i386/xen/xen-hvm.c +++ b/hw/i386/xen/xen-hvm.c @@ -14,6 +14,7 @@ #include "hw/pci/pci.h" #include "hw/pci/pci_host.h" #include "hw/i386/pc.h" +#include "hw/southbridge/piix.h" #include "hw/irq.h" #include "hw/hw.h" #include "hw/i386/apic-msidef.h" @@ -156,8 +157,8 @@ void xen_piix_pci_write_config_client(uint32_t address, uint32_t val, int len) v = 0; } v &= 0xf; - if (((address + i) >= 0x60) && ((address + i) <= 0x63)) { - xen_set_pci_link_route(xen_domid, address + i - 0x60, v); + if (((address + i) >= PIIX_PIRQCA) && ((address + i) <= PIIX_PIRQCD)) { + xen_set_pci_link_route(xen_domid, address + i - PIIX_PIRQCA, v); } } } diff --git a/hw/mips/gt64xxx_pci.c b/hw/mips/gt64xxx_pci.c index c277398c0d..5cab9c1ee1 100644 --- a/hw/mips/gt64xxx_pci.c +++ b/hw/mips/gt64xxx_pci.c @@ -1013,12 +1013,12 @@ static void gt64120_pci_set_irq(void *opaque, int irq_num, int level) /* now we change the pic irq level according to the piix irq mappings */ /* XXX: optimize */ - pic_irq = piix4_dev->config[0x60 + irq_num]; + pic_irq = piix4_dev->config[PIIX_PIRQCA + irq_num]; if (pic_irq < 16) { /* The pic level is the logical OR of all the PCI irqs mapped to it. */ pic_level = 0; for (i = 0; i < 4; i++) { - if (pic_irq == piix4_dev->config[0x60 + i]) { + if (pic_irq == piix4_dev->config[PIIX_PIRQCA + i]) { pic_level |= pci_irq_levels[i]; } } diff --git a/hw/pci-host/piix.c b/hw/pci-host/piix.c index 6548d9a4b5..390fb9ceba 100644 --- a/hw/pci-host/piix.c +++ b/hw/pci-host/piix.c @@ -61,7 +61,6 @@ typedef struct I440FXState { #define PIIX_NUM_PIC_IRQS 16 /* i8259 * 2 */ #define PIIX_NUM_PIRQS 4ULL /* PIRQ[A-D] */ #define XEN_PIIX_NUM_PIRQS 128ULL -#define PIIX_PIRQC 0x60 typedef struct PIIX3State { PCIDevice dev; @@ -468,7 +467,7 @@ static void piix3_set_irq_level_internal(PIIX3State *piix3, int pirq, int level) int pic_irq; uint64_t mask; - pic_irq = piix3->dev.config[PIIX_PIRQC + pirq]; + pic_irq = piix3->dev.config[PIIX_PIRQCA + pirq]; if (pic_irq >= PIIX_NUM_PIC_IRQS) { return; } @@ -482,7 +481,7 @@ static void piix3_set_irq_level(PIIX3State *piix3, int pirq, int level) { int pic_irq; - pic_irq = piix3->dev.config[PIIX_PIRQC + pirq]; + pic_irq = piix3->dev.config[PIIX_PIRQCA + pirq]; if (pic_irq >= PIIX_NUM_PIC_IRQS) { return; } @@ -501,7 +500,7 @@ static void piix3_set_irq(void *opaque, int pirq, int level) static PCIINTxRoute piix3_route_intx_pin_to_irq(void *opaque, int pin) { PIIX3State *piix3 = opaque; - int irq = piix3->dev.config[PIIX_PIRQC + pin]; + int irq = piix3->dev.config[PIIX_PIRQCA + pin]; PCIINTxRoute route; if (irq < PIIX_NUM_PIC_IRQS) { @@ -530,7 +529,7 @@ static void piix3_write_config(PCIDevice *dev, uint32_t address, uint32_t val, int len) { pci_default_write_config(dev, address, val, len); - if (ranges_overlap(address, len, PIIX_PIRQC, 4)) { + if (ranges_overlap(address, len, PIIX_PIRQCA, 4)) { PIIX3State *piix3 = PIIX3_PCI_DEVICE(dev); int pic_irq; diff --git a/include/hw/southbridge/piix.h b/include/hw/southbridge/piix.h index e49d4a6bbe..094508b928 100644 --- a/include/hw/southbridge/piix.h +++ b/include/hw/southbridge/piix.h @@ -18,6 +18,12 @@ I2CBus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base, qemu_irq sci_irq, qemu_irq smi_irq, int smm_enabled, DeviceState **piix4_pm); +/* PIRQRC[A:D]: PIRQx Route Control Registers */ +#define PIIX_PIRQCA 0x60 +#define PIIX_PIRQCB 0x61 +#define PIIX_PIRQCC 0x62 +#define PIIX_PIRQCD 0x63 + /* * Reset Control Register: PCI-accessible ISA-Compatible Register at address * 0xcf9, provided by the PCI/ISA bridge (PIIX3 PCI function 0, 8086:7000). -- 2.21.0 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |