Re: [Xen-devel] [PATCH v4 7/8] xen/arm32: head: Introduce macros to create table and mapping entry

[Stefano Stabellini <sstabellini@xxxxxxxxxx>]

On Tue, 17 Sep 2019, Julien Grall wrote:
> At the moment, any update to the boot-pages are open-coded. This is
> making more difficult to understand the logic of a function as each
> update roughly requires 6 instructions.
> 
> To ease the readability, two new macros are introduced:
>     - create_table_entry: Create a page-table entry in a given table.
>     This can work at any level.
>     - create_mapping_entry: Create a mapping entry in a given table.
>     None of the users will require to map at any other level than 3rd
>     (i.e page granularity). So the macro is only supporting 3rd level
>     mapping.
> 
> Unlike arm64, there are no easy way to have a PC relative address within
> the range -/+4GB. In order to have the possibility to use the macro in
> context with MMU on/off, the user needs to tell the state of the MMU.
> 
> Lastly, take the opportunity to replace open-coded version in
> setup_fixmap() by the two new macros. The ones in create_page_tables()
> will be replaced in a follow-up patch.
> 
> Signed-off-by: Julien Grall <julien.grall@xxxxxxx>

Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>


> ---
>     The adr_l hack is a bit ugly, but I can't find nicer way to avoid
>     code duplication and improve readability.
> 
>     Changes in v4:
>         - Fix typo
>         - s/tlb/ptlb/ in create_mapping_entry macro
>         - Expand comment on top of addr_l macro
>         - Re-order code in create_mapping_entry
> 
>     Changes in v3:
>         - Patch added
> ---
>  xen/arch/arm/arm32/head.S | 111 
> ++++++++++++++++++++++++++++++++++++++--------
>  1 file changed, 92 insertions(+), 19 deletions(-)
> 
> diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S
> index f58d0fcb80..175f0c9760 100644
> --- a/xen/arch/arm/arm32/head.S
> +++ b/xen/arch/arm/arm32/head.S
> @@ -50,6 +50,23 @@
>  .endm
>  
>  /*
> + * There are no easy way to have a PC relative address within the range
> + * +/- 4GB of the PC.
> + *
> + * This macro workaround it by asking the user to tell whether the MMU
> + * has been turned on or not.
> + *
> + * When the MMU is turned off, we need to apply the physical offset
> + * (r10) in order to find the associated physical address.
> + */
> +.macro adr_l, dst, sym, mmu
> +        ldr   \dst, =\sym
> +        .if \mmu == 0
> +        add   \dst, \dst, r10
> +        .endif
> +.endm
> +
> +/*
>   * Common register usage in this file:
>   *   r0  -
>   *   r1  -
> @@ -342,6 +359,76 @@ cpu_init_done:
>  ENDPROC(cpu_init)
>  
>  /*
> + * Macro to create a page table entry in \ptbl to \tbl
> + *
> + * ptbl:    table symbol where the entry will be created
> + * tbl:     table symbol to point to
> + * virt:    virtual address
> + * shift:   #imm page table shift
> + * mmu:     Is the MMU turned on/off. If not specified it will be off
> + *
> + * Preserves \virt
> + * Clobbers r1 - r4
> + *
> + * Also use r10 for the phys offset.
> + *
> + * Note that \virt should be in a register other than r1 - r4
> + */
> +.macro create_table_entry, ptbl, tbl, virt, shift, mmu=0
> +        lsr   r1, \virt, #\shift
> +        mov_w r2, LPAE_ENTRY_MASK
> +        and   r1, r1, r2             /* r1 := slot in \tlb */
> +        lsl   r1, r1, #3             /* r1 := slot offset in \tlb */
> +
> +        ldr   r4, =\tbl
> +        add   r4, r4, r10            /* r4 := paddr(\tlb) */
> +
> +        mov   r2, #PT_PT             /* r2:r3 := right for linear PT */
> +        orr   r2, r2, r4             /*           + \tlb paddr */
> +        mov   r3, #0
> +
> +        adr_l r4, \ptbl, \mmu
> +
> +        strd  r2, r3, [r4, r1]
> +.endm
> +
> +/*
> + * Macro to create a mapping entry in \tbl to \paddr. Only mapping in 3rd
> + * level table (i.e page granularity) is supported.
> + *
> + * ptbl:     table symbol where the entry will be created
> + * virt:    virtual address
> + * phys:    physical address
> + * type:    mapping type. If not specified it will be normal memory 
> (PT_MEM_L3)
> + * mmu:     Is the MMU turned on/off. If not specified it will be off
> + *
> + * Preserves \virt, \phys
> + * Clobbers r1 - r4
> + *
> + * * Also use r10 for the phys offset.
> + *
> + * Note that \virt and \paddr should be in other registers than r1 - r4
> + * and be distinct.
> + */
> +.macro create_mapping_entry, ptbl, virt, phys, type=PT_MEM_L3, mmu=0
> +        mov_w r2, LPAE_ENTRY_MASK
> +        lsr   r1, \virt, #THIRD_SHIFT
> +        and   r1, r1, r2             /* r1 := slot in \tlb */
> +        lsl   r1, r1, #3             /* r1 := slot offset in \tlb */
> +
> +        lsr   r4, \phys, #THIRD_SHIFT
> +        lsl   r4, r4, #THIRD_SHIFT   /* r4 := PAGE_ALIGNED(phys) */
> +
> +        mov   r2, #\type             /* r2:r3 := right for section PT */
> +        orr   r2, r2, r4             /*          + PAGE_ALIGNED(phys) */
> +        mov   r3, #0
> +
> +        adr_l r4, \ptbl, \mmu
> +
> +        strd  r2, r3, [r4, r1]
> +.endm
> +
> +/*
>   * Rebuild the boot pagetable's first-level entries. The structure
>   * is described in mm.c.
>   *
> @@ -557,31 +644,17 @@ ENDPROC(remove_identity_mapping)
>   *   r10: Physical offset
>   *   r11: Early UART base physical address
>   *
> - * Clobbers r1 - r4
> + * Clobbers r0 - r4
>   */
>  setup_fixmap:
>  #if defined(CONFIG_EARLY_PRINTK)
>          /* Add UART to the fixmap table */
> -        ldr   r1, =xen_fixmap        /* r1 := vaddr (xen_fixmap) */
> -        lsr   r2, r11, #THIRD_SHIFT
> -        lsl   r2, r2, #THIRD_SHIFT   /* 4K aligned paddr of UART */
> -        orr   r2, r2, #PT_UPPER(DEV_L3)
> -        orr   r2, r2, #PT_LOWER(DEV_L3) /* r2:r3 := 4K dev map including 
> UART */
> -        mov   r3, #0x0
> -        strd  r2, r3, [r1, #(FIXMAP_CONSOLE*8)] /* Map it in the first 
> fixmap's slot */
> +        ldr   r0, =EARLY_UART_VIRTUAL_ADDRESS
> +        create_mapping_entry xen_fixmap, r0, r11, type=PT_DEV_L3, mmu=1
>  #endif
> -
>          /* Map fixmap into boot_second */
> -        ldr   r1, =boot_second       /* r1 := vaddr (boot_second) */
> -        ldr   r2, =xen_fixmap
> -        add   r2, r2, r10            /* r2 := paddr (xen_fixmap) */
> -        orr   r2, r2, #PT_UPPER(PT)
> -        orr   r2, r2, #PT_LOWER(PT)  /* r2:r3 := table map of xen_fixmap */
> -        ldr   r4, =FIXMAP_ADDR(0)
> -        mov   r4, r4, lsr #(SECOND_SHIFT - 3)   /* r4 := Slot for FIXMAP(0) 
> */
> -        mov   r3, #0x0
> -        strd  r2, r3, [r1, r4]       /* Map it in the fixmap's slot */
> -
> +        mov_w r0, FIXMAP_ADDR(0)
> +        create_table_entry boot_second, xen_fixmap, r0, SECOND_SHIFT, mmu=1
>          /* Ensure any page table updates made above have occurred. */
>          dsb   nshst
>  
> -- 
> 2.11.0
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel