Re: [Xen-devel] Starting to port xen on beagleboard-x15 (GSoC 2019 project)

[Denis Obrezkov <denisobrezkov@xxxxxxxxx>]

Hi,

On 6/19/19 5:06 PM, Julien Grall wrote:
> 
> 
> On 19/06/2019 15:33, Denis Obrezkov wrote:
>> Hi,
> 
> Hi Denis,
> 
>> ср, 19 июн. 2019 г. в 14:01, Andrii Anisov <andrii.anisov@xxxxxxxxx>:
>>>
>>>
>>>
>>> On 18.06.19 19:19, Julien Grall wrote:
>>>> Denis (the author of the thread) is doing a GSOC to port Xen on the
>>>> BeagleBoard X15. You ended up CCed because you can provide feedback
>>>> how to proceed. Not because we wanted you to implement it...
>>>
>>> OK then.
>>>
>>> Denis,
>>>
>>> Feel free to contact me in case you need clarifications about the stuff.
>> thank you
>>>
>>> -- 
>>> Sincerely,
>>> Andrii Anisov.
> 
> Don't forget to strip unnecessary bits of the e-mail you quote :).
> 
>>
>> So, right now I get a bit further and it seems that CPU1 was switched
>> to hyp mode:
>> https://github.com/embeddedden/xen/commit/2d76ae7aacb7c0ea7312eaddb91c3eb1e1963cc9
>>
> 
> Nice to see some progress here! :)
> 
> Just to keep record of the discussion on IRC:
> 
>     - omap5_init_secondary is the entry point to Xen and SMC #0 is
> called right after. There are nothing in r2-r12 that we care about, so
> there are no need to save/restore them. On a side note, you could not
> use sp because we don't know the value stored in it. So you may rewrite
> Xen (or any other modules).
>     
>     - From the pastebin "(XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27
> Freq: 0 KHz". It looks like the register CNTFREQ is not configured
> correctly on the CPU. Looking at Linux, they have code to setup CNTFRQ
> (set_cntfrq) for all the CPUs (see realtime_counter_init in
> arch/arm/mach-omap2/timer.c and omap4_secondary_init in
> arch/arm/mach-omap2/omap-smp.c).
>       In the case of Xen, I think we want to call set_cntfreq in
> omap5_init_time() for the boot CPU. For the secondary CPUs, we may need
> to introduce a callback in struct platform_desc to be called during
> secondary startup.
> 
> Lastly, please clean-up the code and send the patch on xen-devel. I will
> have a closer look at that time. Feel free to ping me on IRC if you have
> any doubt how to proceed.
Ok, I will read xen code guideline and send the patch.
> 
>> and the output:
>> https://pastebin.com/3JBw6S4K
> 
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Missing kernel boot module?
> (XEN)
> (XEN) ****************************************
> (XEN) Panic on CPU 0:
> (XEN) Could not set up DOM0 guest OS
> (XEN) ****************************************
> 
> You probably haven't set up the Dom0 kernel here. Check you u-boot runes
> for this.
So, I configured dtb and got:
https://pastebin.com/uDYiGsHL
So, it seems that timer interrupts don't work for now.

-- 
Regards, Denis Obrezkov

Attachment: signature.asc
Description: OpenPGP digital signature

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel