|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v6 02/10] xen/arm: optee: add OP-TEE header files
This header files describes protocol between OP-TEE OS and OP-TEE
clients, which are running in Normal World. This headers are needed
for upcoming OP-TEE mediator, which is added in the next patch. Reason
to add those headers in separate patch is to ease up review. Those
files were taken from OP-TEE OS 3.5.0 tree and mangled a bit to
compile with XEN.
Location of the files in the original tree:
core/include/optee_msg.h
core/include/optee_rpc_cmd.h
core/arch/arm/include/sm/optee_smc.h
[OP-TEE commit id 5df2a985b2ffd0b6f1107f12ca2a88203bf31328]
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@xxxxxxxx>
---
Changes from v5:
- Used optee_os headers instead of linux ones
Changes from v4:
- Updated to latest OP-TEE version because of adding
OPTEE_SMC_GET_THREAD_COUNT call which will be released with
OP-TEE 3.5.0
Changes from v3:
- Updated to latest OP-TEE version because virtualization
support to OP-TEE was merged into mainline.
---
xen/include/asm-arm/tee/optee_msg.h | 310 +++++++++++++
xen/include/asm-arm/tee/optee_rpc_cmd.h | 318 +++++++++++++
xen/include/asm-arm/tee/optee_smc.h | 564 ++++++++++++++++++++++++
3 files changed, 1192 insertions(+)
create mode 100644 xen/include/asm-arm/tee/optee_msg.h
create mode 100644 xen/include/asm-arm/tee/optee_rpc_cmd.h
create mode 100644 xen/include/asm-arm/tee/optee_smc.h
diff --git a/xen/include/asm-arm/tee/optee_msg.h
b/xen/include/asm-arm/tee/optee_msg.h
new file mode 100644
index 0000000000..fe743dbde3
--- /dev/null
+++ b/xen/include/asm-arm/tee/optee_msg.h
@@ -0,0 +1,310 @@
+/* SPDX-License-Identifier: BSD-2-Clause */
+/*
+ * Copyright (c) 2015-2017, Linaro Limited
+ */
+#ifndef _OPTEE_MSG_H
+#define _OPTEE_MSG_H
+
+#include <xen/bitops.h>
+#include <xen/types.h>
+
+/*
+ * This file defines the OP-TEE message protocol used to communicate
+ * with an instance of OP-TEE running in secure world.
+ */
+
+/*****************************************************************************
+ * Part 1 - formatting of messages
+ *****************************************************************************/
+
+#define OPTEE_MSG_ATTR_TYPE_NONE 0x0
+#define OPTEE_MSG_ATTR_TYPE_VALUE_INPUT 0x1
+#define OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT 0x2
+#define OPTEE_MSG_ATTR_TYPE_VALUE_INOUT 0x3
+#define OPTEE_MSG_ATTR_TYPE_RMEM_INPUT 0x5
+#define OPTEE_MSG_ATTR_TYPE_RMEM_OUTPUT 0x6
+#define OPTEE_MSG_ATTR_TYPE_RMEM_INOUT 0x7
+#define OPTEE_MSG_ATTR_TYPE_TMEM_INPUT 0x9
+#define OPTEE_MSG_ATTR_TYPE_TMEM_OUTPUT 0xa
+#define OPTEE_MSG_ATTR_TYPE_TMEM_INOUT 0xb
+
+#define OPTEE_MSG_ATTR_TYPE_MASK GENMASK(7, 0)
+
+/*
+ * Meta parameter to be absorbed by the Secure OS and not passed
+ * to the Trusted Application.
+ *
+ * Currently only used with OPTEE_MSG_CMD_OPEN_SESSION.
+ */
+#define OPTEE_MSG_ATTR_META BIT(8, UL)
+
+/*
+ * Pointer to a list of pages used to register user-defined SHM buffer.
+ * Used with OPTEE_MSG_ATTR_TYPE_TMEM_*.
+ * buf_ptr should point to the beginning of the buffer. Buffer will contain
+ * list of page addresses. OP-TEE core can reconstruct contiguous buffer from
+ * that page addresses list. Page addresses are stored as 64 bit values.
+ * Last entry on a page should point to the next page of buffer.
+ * Every entry in buffer should point to a 4k page beginning (12 least
+ * significant bits must be equal to zero).
+ *
+ * 12 least significant of optee_msg_param.u.tmem.buf_ptr should hold page
+ * offset of user buffer.
+ *
+ * So, entries should be placed like members of this structure:
+ *
+ * struct page_data {
+ * uint64_t pages_array[OPTEE_MSG_NONCONTIG_PAGE_SIZE/sizeof(uint64_t) - 1];
+ * uint64_t next_page_data;
+ * };
+ *
+ * Structure is designed to exactly fit into the page size
+ * OPTEE_MSG_NONCONTIG_PAGE_SIZE which is a standard 4KB page.
+ *
+ * The size of 4KB is chosen because this is the smallest page size for ARM
+ * architectures. If REE uses larger pages, it should divide them to 4KB ones.
+ */
+#define OPTEE_MSG_ATTR_NONCONTIG BIT(9, UL)
+
+/*
+ * Memory attributes for caching passed with temp memrefs. The actual value
+ * used is defined outside the message protocol with the exception of
+ * OPTEE_MSG_ATTR_CACHE_PREDEFINED which means the attributes already
+ * defined for the memory range should be used. If optee_smc.h is used as
+ * bearer of this protocol OPTEE_SMC_SHM_* is used for values.
+ */
+#define OPTEE_MSG_ATTR_CACHE_SHIFT 16
+#define OPTEE_MSG_ATTR_CACHE_MASK GENMASK(2, 0)
+#define OPTEE_MSG_ATTR_CACHE_PREDEFINED 0
+
+/*
+ * Same values as TEE_LOGIN_* from TEE Internal API
+ */
+#define OPTEE_MSG_LOGIN_PUBLIC 0x00000000
+#define OPTEE_MSG_LOGIN_USER 0x00000001
+#define OPTEE_MSG_LOGIN_GROUP 0x00000002
+#define OPTEE_MSG_LOGIN_APPLICATION 0x00000004
+#define OPTEE_MSG_LOGIN_APPLICATION_USER 0x00000005
+#define OPTEE_MSG_LOGIN_APPLICATION_GROUP 0x00000006
+
+/*
+ * Page size used in non-contiguous buffer entries
+ */
+#define OPTEE_MSG_NONCONTIG_PAGE_SIZE 4096
+
+#ifndef ASM
+/**
+ * struct optee_msg_param_tmem - temporary memory reference parameter
+ * @buf_ptr: Address of the buffer
+ * @size: Size of the buffer
+ * @shm_ref: Temporary shared memory reference, pointer to a struct tee_shm
+ *
+ * Secure and normal world communicates pointers as physical address
+ * instead of the virtual address. This is because secure and normal world
+ * have completely independent memory mapping. Normal world can even have a
+ * hypervisor which need to translate the guest physical address (AKA IPA
+ * in ARM documentation) to a real physical address before passing the
+ * structure to secure world.
+ */
+struct optee_msg_param_tmem {
+ uint64_t buf_ptr;
+ uint64_t size;
+ uint64_t shm_ref;
+};
+
+/**
+ * struct optee_msg_param_rmem - registered memory reference parameter
+ * @offs: Offset into shared memory reference
+ * @size: Size of the buffer
+ * @shm_ref: Shared memory reference, pointer to a struct tee_shm
+ */
+struct optee_msg_param_rmem {
+ uint64_t offs;
+ uint64_t size;
+ uint64_t shm_ref;
+};
+
+/**
+ * struct optee_msg_param_value - values
+ * @a: first value
+ * @b: second value
+ * @c: third value
+ */
+struct optee_msg_param_value {
+ uint64_t a;
+ uint64_t b;
+ uint64_t c;
+};
+
+/**
+ * struct optee_msg_param - parameter
+ * @attr: attributes
+ * @memref: a memory reference
+ * @value: a value
+ *
+ * @attr & OPTEE_MSG_ATTR_TYPE_MASK indicates if tmem, rmem or value is used in
+ * the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value,
+ * OPTEE_MSG_ATTR_TYPE_TMEM_* indicates tmem and
+ * OPTEE_MSG_ATTR_TYPE_RMEM_* indicates rmem.
+ * OPTEE_MSG_ATTR_TYPE_NONE indicates that none of the members are used.
+ */
+struct optee_msg_param {
+ uint64_t attr;
+ union {
+ struct optee_msg_param_tmem tmem;
+ struct optee_msg_param_rmem rmem;
+ struct optee_msg_param_value value;
+ } u;
+};
+
+/**
+ * struct optee_msg_arg - call argument
+ * @cmd: Command, one of OPTEE_MSG_CMD_* or OPTEE_MSG_RPC_CMD_*
+ * @func: Trusted Application function, specific to the Trusted Application,
+ * used if cmd == OPTEE_MSG_CMD_INVOKE_COMMAND
+ * @session: In parameter for all OPTEE_MSG_CMD_* except
+ * OPTEE_MSG_CMD_OPEN_SESSION where it's an output parameter instead
+ * @cancel_id: Cancellation id, a unique value to identify this request
+ * @ret: return value
+ * @ret_origin: origin of the return value
+ * @num_params: number of parameters supplied to the OS Command
+ * @params: the parameters supplied to the OS Command
+ *
+ * All normal calls to Trusted OS uses this struct. If cmd requires further
+ * information than what these fields hold it can be passed as a parameter
+ * tagged as meta (setting the OPTEE_MSG_ATTR_META bit in corresponding
+ * attrs field). All parameters tagged as meta have to come first.
+ */
+struct optee_msg_arg {
+ uint32_t cmd;
+ uint32_t func;
+ uint32_t session;
+ uint32_t cancel_id;
+ uint32_t pad;
+ uint32_t ret;
+ uint32_t ret_origin;
+ uint32_t num_params;
+
+ /* num_params tells the actual number of element in params */
+ struct optee_msg_param params[];
+};
+
+/**
+ * OPTEE_MSG_GET_ARG_SIZE - return size of struct optee_msg_arg
+ *
+ * @num_params: Number of parameters embedded in the struct optee_msg_arg
+ *
+ * Returns the size of the struct optee_msg_arg together with the number
+ * of embedded parameters.
+ */
+#define OPTEE_MSG_GET_ARG_SIZE(num_params) \
+ (sizeof(struct optee_msg_arg) + \
+ sizeof(struct optee_msg_param) * (num_params))
+
+/*
+ * Defines the maximum value of @num_params that can be passed to
+ * OPTEE_MSG_GET_ARG_SIZE without a risk of crossing page boundary.
+ */
+#define OPTEE_MSG_MAX_NUM_PARAMS \
+ ((OPTEE_MSG_NONCONTIG_PAGE_SIZE - sizeof(struct optee_msg_arg)) / \
+ sizeof(struct optee_msg_param))
+
+#endif /*ASM*/
+
+/*****************************************************************************
+ * Part 2 - requests from normal world
+ *****************************************************************************/
+
+/*
+ * Return the following UID if using API specified in this file without
+ * further extensions:
+ * 384fb3e0-e7f8-11e3-af63-0002a5d5c51b.
+ * Represented in 4 32-bit words in OPTEE_MSG_UID_0, OPTEE_MSG_UID_1,
+ * OPTEE_MSG_UID_2, OPTEE_MSG_UID_3.
+ */
+#define OPTEE_MSG_UID_0 0x384fb3e0
+#define OPTEE_MSG_UID_1 0xe7f811e3
+#define OPTEE_MSG_UID_2 0xaf630002
+#define OPTEE_MSG_UID_3 0xa5d5c51b
+#define OPTEE_MSG_FUNCID_CALLS_UID 0xFF01
+
+/*
+ * Returns 2.0 if using API specified in this file without further
+ * extensions. Represented in 2 32-bit words in OPTEE_MSG_REVISION_MAJOR
+ * and OPTEE_MSG_REVISION_MINOR
+ */
+#define OPTEE_MSG_REVISION_MAJOR 2
+#define OPTEE_MSG_REVISION_MINOR 0
+#define OPTEE_MSG_FUNCID_CALLS_REVISION 0xFF03
+
+/*
+ * Get UUID of Trusted OS.
+ *
+ * Used by non-secure world to figure out which Trusted OS is installed.
+ * Note that returned UUID is the UUID of the Trusted OS, not of the API.
+ *
+ * Returns UUID in 4 32-bit words in the same way as
+ * OPTEE_MSG_FUNCID_CALLS_UID described above.
+ */
+#define OPTEE_MSG_OS_OPTEE_UUID_0 0x486178e0
+#define OPTEE_MSG_OS_OPTEE_UUID_1 0xe7f811e3
+#define OPTEE_MSG_OS_OPTEE_UUID_2 0xbc5e0002
+#define OPTEE_MSG_OS_OPTEE_UUID_3 0xa5d5c51b
+#define OPTEE_MSG_FUNCID_GET_OS_UUID 0x0000
+
+/*
+ * Get revision of Trusted OS.
+ *
+ * Used by non-secure world to figure out which version of the Trusted OS
+ * is installed. Note that the returned revision is the revision of the
+ * Trusted OS, not of the API.
+ *
+ * Returns revision in 2 32-bit words in the same way as
+ * OPTEE_MSG_CALLS_REVISION described above.
+ */
+#define OPTEE_MSG_FUNCID_GET_OS_REVISION 0x0001
+
+/*
+ * Do a secure call with struct optee_msg_arg as argument
+ * The OPTEE_MSG_CMD_* below defines what goes in struct optee_msg_arg::cmd
+ *
+ * OPTEE_MSG_CMD_OPEN_SESSION opens a session to a Trusted Application.
+ * The first two parameters are tagged as meta, holding two value
+ * parameters to pass the following information:
+ * param[0].u.value.a-b uuid of Trusted Application
+ * param[1].u.value.a-b uuid of Client
+ * param[1].u.value.c Login class of client OPTEE_MSG_LOGIN_*
+ *
+ * OPTEE_MSG_CMD_INVOKE_COMMAND invokes a command a previously opened
+ * session to a Trusted Application. struct optee_msg_arg::func is Trusted
+ * Application function, specific to the Trusted Application.
+ *
+ * OPTEE_MSG_CMD_CLOSE_SESSION closes a previously opened session to
+ * Trusted Application.
+ *
+ * OPTEE_MSG_CMD_CANCEL cancels a currently invoked command.
+ *
+ * OPTEE_MSG_CMD_REGISTER_SHM registers a shared memory reference. The
+ * information is passed as:
+ * [in] param[0].attr OPTEE_MSG_ATTR_TYPE_TMEM_INPUT
+ * [| OPTEE_MSG_ATTR_NONCONTIG]
+ * [in] param[0].u.tmem.buf_ptr physical address (of first
fragment)
+ * [in] param[0].u.tmem.size size (of first fragment)
+ * [in] param[0].u.tmem.shm_ref holds shared memory reference
+ *
+ * OPTEE_MSG_CMD_UNREGISTER_SHM unregisteres a previously registered shared
+ * memory reference. The information is passed as:
+ * [in] param[0].attr OPTEE_MSG_ATTR_TYPE_RMEM_INPUT
+ * [in] param[0].u.rmem.shm_ref holds shared memory reference
+ * [in] param[0].u.rmem.offs 0
+ * [in] param[0].u.rmem.size 0
+ */
+#define OPTEE_MSG_CMD_OPEN_SESSION 0
+#define OPTEE_MSG_CMD_INVOKE_COMMAND 1
+#define OPTEE_MSG_CMD_CLOSE_SESSION 2
+#define OPTEE_MSG_CMD_CANCEL 3
+#define OPTEE_MSG_CMD_REGISTER_SHM 4
+#define OPTEE_MSG_CMD_UNREGISTER_SHM 5
+#define OPTEE_MSG_FUNCID_CALL_WITH_ARG 0x0004
+
+#endif /* _OPTEE_MSG_H */
diff --git a/xen/include/asm-arm/tee/optee_rpc_cmd.h
b/xen/include/asm-arm/tee/optee_rpc_cmd.h
new file mode 100644
index 0000000000..d6b9dfe30c
--- /dev/null
+++ b/xen/include/asm-arm/tee/optee_rpc_cmd.h
@@ -0,0 +1,318 @@
+/* SPDX-License-Identifier: BSD-2-Clause */
+/*
+ * Copyright (c) 2016-2017, Linaro Limited
+ */
+
+#ifndef __OPTEE_RPC_CMD_H
+#define __OPTEE_RPC_CMD_H
+
+/*
+ * All RPC is done with a struct optee_msg_arg as bearer of information,
+ * struct optee_msg_arg::arg holds values defined by OPTEE_RPC_CMD_* below.
+ * Only the commands handled by the kernel driver are defined here.
+ *
+ * RPC communication with tee-supplicant is reversed compared to normal
+ * client communication described above. The supplicant receives requests
+ * and sends responses.
+ */
+
+/*
+ * Load a TA into memory
+ *
+ * Since the size of the TA isn't known in advance the size of the TA is
+ * can be queried with a NULL buffer.
+ *
+ * [in] value[0].a-b UUID
+ * [out] memref[1] Buffer with TA
+ */
+#define OPTEE_RPC_CMD_LOAD_TA 0
+
+/*
+ * Replay Protected Memory Block access
+ *
+ * [in] memref[0] Frames to device
+ * [out] memref[1] Frames from device
+ */
+#define OPTEE_RPC_CMD_RPMB 1
+
+/*
+ * File system access, see definition of protocol below
+ */
+#define OPTEE_RPC_CMD_FS 2
+
+/*
+ * Get time
+ *
+ * Returns number of seconds and nano seconds since the Epoch,
+ * 1970-01-01 00:00:00 +0000 (UTC).
+ *
+ * [out] value[0].a Number of seconds
+ * [out] value[0].b Number of nano seconds.
+ */
+#define OPTEE_RPC_CMD_GET_TIME 3
+
+/*
+ * Wait queue primitive, helper for secure world to implement a wait queue.
+ *
+ * If secure world needs to wait for a secure world mutex it issues a sleep
+ * request instead of spinning in secure world. Conversely is a wakeup
+ * request issued when a secure world mutex with a thread waiting thread is
+ * unlocked.
+ *
+ * Waiting on a key
+ * [in] value[0].a OPTEE_RPC_WAIT_QUEUE_SLEEP
+ * [in] value[0].b Wait key
+ *
+ * Waking up a key
+ * [in] value[0].a OPTEE_RPC_WAIT_QUEUE_WAKEUP
+ * [in] value[0].b Wakeup key
+ */
+#define OPTEE_RPC_CMD_WAIT_QUEUE 4
+#define OPTEE_RPC_WAIT_QUEUE_SLEEP 0
+#define OPTEE_RPC_WAIT_QUEUE_WAKEUP 1
+
+/*
+ * Suspend execution
+ *
+ * [in] value[0].a Number of milliseconds to suspend
+ */
+#define OPTEE_RPC_CMD_SUSPEND 5
+
+/*
+ * Allocate a piece of shared memory
+ *
+ * [in] value[0].a Type of memory one of
+ * OPTEE_RPC_SHM_TYPE_* below
+ * [in] value[0].b Requested size
+ * [in] value[0].c Required alignment
+ * [out] memref[0] Buffer
+ */
+#define OPTEE_RPC_CMD_SHM_ALLOC 6
+/* Memory that can be shared with a non-secure user space application */
+#define OPTEE_RPC_SHM_TYPE_APPL 0
+/* Memory only shared with non-secure kernel */
+#define OPTEE_RPC_SHM_TYPE_KERNEL 1
+/*
+ * Memory shared with non-secure kernel and exported to a non-secure user
+ * space application
+ */
+#define OPTEE_RPC_SHM_TYPE_GLOBAL 2
+
+/*
+ * Free shared memory previously allocated with OPTEE_RPC_CMD_SHM_ALLOC
+ *
+ * [in] value[0].a Type of memory one of
+ * OPTEE_RPC_SHM_TYPE_* above
+ * [in] value[0].b Value of shared memory reference or cookie
+ */
+#define OPTEE_RPC_CMD_SHM_FREE 7
+
+/* Was OPTEE_RPC_CMD_SQL_FS, which isn't supported any longer */
+#define OPTEE_RPC_CMD_SQL_FS_RESERVED 8
+
+/*
+ * Send TA profiling information to normal world
+ *
+ * [in/out] value[0].a File identifier. Must be set to 0 on
+ * first call. A value >= 1 will be
+ * returned on success. Re-use this value
+ * to append data to the same file.
+ * [in] memref[1] TA UUID
+ * [in] memref[2] Profile data
+ */
+#define OPTEE_RPC_CMD_GPROF 9
+
+/*
+ * Socket command, see definition of protocol below
+ */
+#define OPTEE_RPC_CMD_SOCKET 10
+
+/*
+ * Register timestamp buffer in the linux kernel optee driver
+ *
+ * [in] value[0].a Subcommand (register buffer, unregister buffer)
+ * [in] value[0].b Physical address of timestamp buffer
+ * [in] value[0].c Size of buffer
+ */
+#define OPTEE_RPC_CMD_BENCH_REG 20
+
+/*
+ * Definition of protocol for command OPTEE_RPC_CMD_FS
+ */
+
+/*
+ * Open a file
+ *
+ * [in] value[0].a OPTEE_RPC_FS_OPEN
+ * [in] memref[1] A string holding the file name
+ * [out] value[2].a File descriptor of open file
+ */
+#define OPTEE_RPC_FS_OPEN 0
+
+/*
+ * Create a file
+ *
+ * [in] value[0].a OPTEE_RPC_FS_CREATE
+ * [in] memref[1] A string holding the file name
+ * [out] value[2].a File descriptor of open file
+ */
+#define OPTEE_RPC_FS_CREATE 1
+
+/*
+ * Close a file
+ *
+ * [in] value[0].a OPTEE_RPC_FS_CLOSE
+ * [in] value[0].b File descriptor of open file.
+ */
+#define OPTEE_RPC_FS_CLOSE 2
+
+/*
+ * Read from a file
+ *
+ * [in] value[0].a OPTEE_RPC_FS_READ
+ * [in] value[0].b File descriptor of open file
+ * [in] value[0].c Offset into file
+ * [out] memref[1] Buffer to hold returned data
+ */
+#define OPTEE_RPC_FS_READ 3
+
+/*
+ * Write to a file
+ *
+ * [in] value[0].a OPTEE_RPC_FS_WRITE
+ * [in] value[0].b File descriptor of open file
+ * [in] value[0].c Offset into file
+ * [in] memref[1] Buffer holding data to be written
+ */
+#define OPTEE_RPC_FS_WRITE 4
+
+/*
+ * Truncate a file
+ *
+ * [in] value[0].a OPTEE_RPC_FS_TRUNCATE
+ * [in] value[0].b File descriptor of open file
+ * [in] value[0].c Length of file.
+ */
+#define OPTEE_RPC_FS_TRUNCATE 5
+
+/*
+ * Remove a file
+ *
+ * [in] value[0].a OPTEE_RPC_FS_REMOVE
+ * [in] memref[1] A string holding the file name
+ */
+#define OPTEE_RPC_FS_REMOVE 6
+
+/*
+ * Rename a file
+ *
+ * [in] value[0].a OPTEE_RPC_FS_RENAME
+ * [in] value[0].b True if existing target should be removed
+ * [in] memref[1] A string holding the old file name
+ * [in] memref[2] A string holding the new file name
+ */
+#define OPTEE_RPC_FS_RENAME 7
+
+/*
+ * Opens a directory for file listing
+ *
+ * [in] value[0].a OPTEE_RPC_FS_OPENDIR
+ * [in] memref[1] A string holding the name of the directory
+ * [out] value[2].a Handle to open directory
+ */
+#define OPTEE_RPC_FS_OPENDIR 8
+
+/*
+ * Closes a directory handle
+ *
+ * [in] value[0].a OPTEE_RPC_FS_CLOSEDIR
+ * [in] value[0].b Handle to open directory
+ */
+#define OPTEE_RPC_FS_CLOSEDIR 9
+
+/*
+ * Read next file name of directory
+ *
+ *
+ * [in] value[0].a OPTEE_RPC_FS_READDIR
+ * [in] value[0].b Handle to open directory
+ * [out] memref[1] A string holding the file name
+ */
+#define OPTEE_RPC_FS_READDIR 10
+
+/* End of definition of protocol for command OPTEE_RPC_CMD_FS */
+
+/*
+ * Definition of protocol for command OPTEE_RPC_CMD_SOCKET
+ */
+
+#define OPTEE_RPC_SOCKET_TIMEOUT_NONBLOCKING 0
+#define OPTEE_RPC_SOCKET_TIMEOUT_BLOCKING 0xffffffff
+
+/*
+ * Open socket
+ *
+ * [in] value[0].a OPTEE_RPC_SOCKET_OPEN
+ * [in] value[0].b TA instance id
+ * [in] value[1].a Server port number
+ * [in] value[1].b Protocol, TEE_ISOCKET_PROTOCOLID_*
+ * [in] value[1].c Ip version TEE_IP_VERSION_* from tee_ipsocket.h
+ * [in] memref[2] Server address
+ * [out] value[3].a Socket handle (32-bit)
+ */
+#define OPTEE_RPC_SOCKET_OPEN 0
+
+/*
+ * Close socket
+ *
+ * [in] value[0].a OPTEE_RPC_SOCKET_CLOSE
+ * [in] value[0].b TA instance id
+ * [in] value[0].c Socket handle
+ */
+#define OPTEE_RPC_SOCKET_CLOSE 1
+
+/*
+ * Close all sockets
+ *
+ * [in] value[0].a OPTEE_RPC_SOCKET_CLOSE_ALL
+ * [in] value[0].b TA instance id
+ */
+#define OPTEE_RPC_SOCKET_CLOSE_ALL 2
+
+/*
+ * Send data on socket
+ *
+ * [in] value[0].a OPTEE_RPC_SOCKET_SEND
+ * [in] value[0].b TA instance id
+ * [in] value[0].c Socket handle
+ * [in] memref[1] Buffer to transmit
+ * [in] value[2].a Timeout ms or OPTEE_RPC_SOCKET_TIMEOUT_*
+ * [out] value[2].b Number of transmitted bytes
+ */
+#define OPTEE_RPC_SOCKET_SEND 3
+
+/*
+ * Receive data on socket
+ *
+ * [in] value[0].a OPTEE_RPC_SOCKET_RECV
+ * [in] value[0].b TA instance id
+ * [in] value[0].c Socket handle
+ * [out] memref[1] Buffer to receive
+ * [in] value[2].a Timeout ms or OPTEE_RPC_SOCKET_TIMEOUT_*
+ */
+#define OPTEE_RPC_SOCKET_RECV 4
+
+/*
+ * Perform IOCTL on socket
+ *
+ * [in] value[0].a OPTEE_RPC_SOCKET_IOCTL
+ * [in] value[0].b TA instance id
+ * [in] value[0].c Socket handle
+ * [in/out] memref[1] Buffer
+ * [in] value[2].a Ioctl command
+ */
+#define OPTEE_RPC_SOCKET_IOCTL 5
+
+/* End of definition of protocol for command OPTEE_RPC_CMD_SOCKET */
+
+#endif /*__OPTEE_RPC_CMD_H*/
diff --git a/xen/include/asm-arm/tee/optee_smc.h
b/xen/include/asm-arm/tee/optee_smc.h
new file mode 100644
index 0000000000..d568bb2fe1
--- /dev/null
+++ b/xen/include/asm-arm/tee/optee_smc.h
@@ -0,0 +1,564 @@
+/* SPDX-License-Identifier: BSD-2-Clause */
+/*
+ * Copyright (c) 2015, Linaro Limited
+ */
+#ifndef OPTEE_SMC_H
+#define OPTEE_SMC_H
+
+/*
+ * This file is exported by OP-TEE and is in kept in sync between secure
+ * world and normal world kernel driver. We're following ARM SMC Calling
+ * Convention as specified in
+ * http://infocenter.arm.com/help/topic/com.arm.doc.den0028a/index.html
+ *
+ * This file depends on optee_msg.h being included to expand the SMC id
+ * macros below.
+ */
+
+
+#define OPTEE_SMC_STD_CALL_VAL(func_num) \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_CONV_32, \
+ ARM_SMCCC_OWNER_TRUSTED_OS, (func_num))
+#define OPTEE_SMC_FAST_CALL_VAL(func_num) \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_CONV_32, \
+ ARM_SMCCC_OWNER_TRUSTED_OS, (func_num))
+
+/*
+ * Function specified by SMC Calling convention.
+ */
+#define OPTEE_SMC_FUNCID_CALLS_COUNT 0xFF00
+#define OPTEE_SMC_CALLS_COUNT \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_CONV_32, \
+ ARM_SMCCC_OWNER_TRUSTED_OS_END, \
+ OPTEE_SMC_FUNCID_CALLS_COUNT)
+
+/*
+ * Normal cached memory (write-back), shareable for SMP systems and not
+ * shareable for UP systems.
+ */
+#define OPTEE_SMC_SHM_CACHED 1
+
+/*
+ * a0..a7 is used as register names in the descriptions below, on arm32
+ * that translates to r0..r7 and on arm64 to w0..w7. In both cases it's
+ * 32-bit registers.
+ */
+
+/*
+ * Function specified by SMC Calling convention
+ *
+ * Return the following UID if using API specified in this file
+ * without further extensions:
+ * 384fb3e0-e7f8-11e3-af63-0002a5d5c51b.
+ * see also OPTEE_MSG_UID_* in optee_msg.h
+ */
+#define OPTEE_SMC_FUNCID_CALLS_UID OPTEE_MSG_FUNCID_CALLS_UID
+#define OPTEE_SMC_CALLS_UID \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_CONV_32, \
+ ARM_SMCCC_OWNER_TRUSTED_OS_END, \
+ OPTEE_SMC_FUNCID_CALLS_UID)
+
+/*
+ * Function specified by SMC Calling convention
+ *
+ * Returns 2.0 if using API specified in this file without further extensions.
+ * see also OPTEE_MSG_REVISION_* in optee_msg.h
+ */
+#define OPTEE_SMC_FUNCID_CALLS_REVISION OPTEE_MSG_FUNCID_CALLS_REVISION
+#define OPTEE_SMC_CALLS_REVISION \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_CONV_32, \
+ ARM_SMCCC_OWNER_TRUSTED_OS_END, \
+ OPTEE_SMC_FUNCID_CALLS_REVISION)
+
+/*
+ * Get UUID of Trusted OS.
+ *
+ * Used by non-secure world to figure out which Trusted OS is installed.
+ * Note that returned UUID is the UUID of the Trusted OS, not of the API.
+ *
+ * Returns UUID in a0-4 in the same way as OPTEE_SMC_CALLS_UID
+ * described above.
+ */
+#define OPTEE_SMC_FUNCID_GET_OS_UUID OPTEE_MSG_FUNCID_GET_OS_UUID
+#define OPTEE_SMC_CALL_GET_OS_UUID \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_OS_UUID)
+
+/*
+ * Get revision of Trusted OS.
+ *
+ * Used by non-secure world to figure out which version of the Trusted OS
+ * is installed. Note that the returned revision is the revision of the
+ * Trusted OS, not of the API.
+ *
+ * Returns revision in a0-1 in the same way as OPTEE_SMC_CALLS_REVISION
+ * described above. May optionally return a 32-bit build identifier in a2,
+ * with zero meaning unspecified.
+ */
+#define OPTEE_SMC_FUNCID_GET_OS_REVISION OPTEE_MSG_FUNCID_GET_OS_REVISION
+#define OPTEE_SMC_CALL_GET_OS_REVISION \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_OS_REVISION)
+
+/*
+ * Call with struct optee_msg_arg as argument
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC*CALL_WITH_ARG
+ * a1 Upper 32 bits of a 64-bit physical pointer to a struct optee_msg_arg
+ * a2 Lower 32 bits of a 64-bit physical pointer to a struct optee_msg_arg
+ * a3 Cache settings, not used if physical pointer is in a predefined shared
+ * memory area else per OPTEE_SMC_SHM_*
+ * a4-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Normal return register usage:
+ * a0 Return value, OPTEE_SMC_RETURN_*
+ * a1-3 Not used
+ * a4-7 Preserved
+ *
+ * OPTEE_SMC_RETURN_ETHREAD_LIMIT return register usage:
+ * a0 Return value, OPTEE_SMC_RETURN_ETHREAD_LIMIT
+ * a1-3 Preserved
+ * a4-7 Preserved
+ *
+ * RPC return register usage:
+ * a0 Return value, OPTEE_SMC_RETURN_IS_RPC(val)
+ * a1-2 RPC parameters
+ * a3-7 Resume information, must be preserved
+ *
+ * Possible return values:
+ * OPTEE_SMC_RETURN_UNKNOWN_FUNCTION Trusted OS does not recognize this
+ * function.
+ * OPTEE_SMC_RETURN_OK Call completed, result updated in
+ * the previously supplied struct
+ * optee_msg_arg.
+ * OPTEE_SMC_RETURN_ETHREAD_LIMIT Number of Trusted OS threads exceeded,
+ * try again later.
+ * OPTEE_SMC_RETURN_EBADADDR Bad physical pointer to struct
+ * optee_msg_arg.
+ * OPTEE_SMC_RETURN_EBADCMD Bad/unknown cmd in struct optee_msg_arg
+ * OPTEE_SMC_RETURN_IS_RPC() Call suspended by RPC call to normal
+ * world.
+ */
+#define OPTEE_SMC_FUNCID_CALL_WITH_ARG OPTEE_MSG_FUNCID_CALL_WITH_ARG
+#define OPTEE_SMC_CALL_WITH_ARG \
+ OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_CALL_WITH_ARG)
+
+/*
+ * Get Shared Memory Config
+ *
+ * Returns the Secure/Non-secure shared memory config.
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_GET_SHM_CONFIG
+ * a1-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Have config return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1 Physical address of start of SHM
+ * a2 Size of of SHM
+ * a3 Cache settings of memory, as defined by the
+ * OPTEE_SMC_SHM_* values above
+ * a4-7 Preserved
+ *
+ * Not available register usage:
+ * a0 OPTEE_SMC_RETURN_ENOTAVAIL
+ * a1-3 Not used
+ * a4-7 Preserved
+ */
+#define OPTEE_SMC_FUNCID_GET_SHM_CONFIG 7
+#define OPTEE_SMC_GET_SHM_CONFIG \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_SHM_CONFIG)
+
+/*
+ * Configures L2CC mutex
+ *
+ * Disables, enables usage of L2CC mutex. Returns or sets physical address
+ * of L2CC mutex.
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_L2CC_MUTEX
+ * a1 OPTEE_SMC_L2CC_MUTEX_GET_ADDR Get physical address of mutex
+ * OPTEE_SMC_L2CC_MUTEX_SET_ADDR Set physical address of mutex
+ * OPTEE_SMC_L2CC_MUTEX_ENABLE Enable usage of mutex
+ * OPTEE_SMC_L2CC_MUTEX_DISABLE Disable usage of mutex
+ * a2 if a1 == OPTEE_SMC_L2CC_MUTEX_SET_ADDR, upper 32bit of a 64bit
+ * physical address of mutex
+ * a3 if a1 == OPTEE_SMC_L2CC_MUTEX_SET_ADDR, lower 32bit of a 64bit
+ * physical address of mutex
+ * a3-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Have config return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1 Preserved
+ * a2 if a1 == OPTEE_SMC_L2CC_MUTEX_GET_ADDR, upper 32bit of a 64bit
+ * physical address of mutex
+ * a3 if a1 == OPTEE_SMC_L2CC_MUTEX_GET_ADDR, lower 32bit of a 64bit
+ * physical address of mutex
+ * a3-7 Preserved
+ *
+ * Error return register usage:
+ * a0 OPTEE_SMC_RETURN_ENOTAVAIL Physical address not available
+ * OPTEE_SMC_RETURN_EBADADDR Bad supplied physical address
+ * OPTEE_SMC_RETURN_EBADCMD Unsupported value in a1
+ * a1-7 Preserved
+ */
+#define OPTEE_SMC_L2CC_MUTEX_GET_ADDR 0
+#define OPTEE_SMC_L2CC_MUTEX_SET_ADDR 1
+#define OPTEE_SMC_L2CC_MUTEX_ENABLE 2
+#define OPTEE_SMC_L2CC_MUTEX_DISABLE 3
+#define OPTEE_SMC_FUNCID_L2CC_MUTEX 8
+#define OPTEE_SMC_L2CC_MUTEX \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_L2CC_MUTEX)
+
+/*
+ * Exchanges capabilities between normal world and secure world
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_EXCHANGE_CAPABILITIES
+ * a1 bitfield of normal world capabilities OPTEE_SMC_NSEC_CAP_*
+ * a2-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Normal return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1 bitfield of secure world capabilities OPTEE_SMC_SEC_CAP_*
+ * a2-7 Preserved
+ *
+ * Error return register usage:
+ * a0 OPTEE_SMC_RETURN_ENOTAVAIL, can't use the capabilities from normal world
+ * a1 bitfield of secure world capabilities OPTEE_SMC_SEC_CAP_*
+ * a2-7 Preserved
+ */
+/* Normal world works as a uniprocessor system */
+#define OPTEE_SMC_NSEC_CAP_UNIPROCESSOR (1 << 0)
+/* Secure world has reserved shared memory for normal world to use */
+#define OPTEE_SMC_SEC_CAP_HAVE_RESERVED_SHM (1 << 0)
+/* Secure world can communicate via previously unregistered shared memory */
+#define OPTEE_SMC_SEC_CAP_UNREGISTERED_SHM (1 << 1)
+
+/*
+ * Secure world supports commands "register/unregister shared memory",
+ * secure world accepts command buffers located in any parts of non-secure RAM
+ */
+#define OPTEE_SMC_SEC_CAP_DYNAMIC_SHM (1 << 2)
+
+#define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES 9
+#define OPTEE_SMC_EXCHANGE_CAPABILITIES \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES)
+
+/*
+ * Disable and empties cache of shared memory objects
+ *
+ * Secure world can cache frequently used shared memory objects, for
+ * example objects used as RPC arguments. When secure world is idle this
+ * function returns one shared memory reference to free. To disable the
+ * cache and free all cached objects this function has to be called until
+ * it returns OPTEE_SMC_RETURN_ENOTAVAIL.
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_DISABLE_SHM_CACHE
+ * a1-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Normal return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1 Upper 32 bits of a 64-bit Shared memory cookie
+ * a2 Lower 32 bits of a 64-bit Shared memory cookie
+ * a3-7 Preserved
+ *
+ * Cache empty return register usage:
+ * a0 OPTEE_SMC_RETURN_ENOTAVAIL
+ * a1-7 Preserved
+ *
+ * Not idle return register usage:
+ * a0 OPTEE_SMC_RETURN_EBUSY
+ * a1-7 Preserved
+ */
+#define OPTEE_SMC_FUNCID_DISABLE_SHM_CACHE 10
+#define OPTEE_SMC_DISABLE_SHM_CACHE \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_DISABLE_SHM_CACHE)
+
+/*
+ * Enable cache of shared memory objects
+ *
+ * Secure world can cache frequently used shared memory objects, for
+ * example objects used as RPC arguments. When secure world is idle this
+ * function returns OPTEE_SMC_RETURN_OK and the cache is enabled. If
+ * secure world isn't idle OPTEE_SMC_RETURN_EBUSY is returned.
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_ENABLE_SHM_CACHE
+ * a1-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Normal return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1-7 Preserved
+ *
+ * Not idle return register usage:
+ * a0 OPTEE_SMC_RETURN_EBUSY
+ * a1-7 Preserved
+ */
+#define OPTEE_SMC_FUNCID_ENABLE_SHM_CACHE 11
+#define OPTEE_SMC_ENABLE_SHM_CACHE \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_ENABLE_SHM_CACHE)
+
+/*
+ * Release of secondary cores
+ *
+ * OP-TEE in secure world is in charge of the release process of secondary
+ * cores. The Rich OS issue the this request to ask OP-TEE to boot up the
+ * secondary cores, go through the OP-TEE per-core initialization, and then
+ * switch to the Non-seCure world with the Rich OS provided entry address.
+ * The secondary cores enter Non-Secure world in SVC mode, with Thumb, FIQ,
+ * IRQ and Abort bits disabled.
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_BOOT_SECONDARY
+ * a1 Index of secondary core to boot
+ * a2 Upper 32 bits of a 64-bit Non-Secure world entry physical address
+ * a3 Lower 32 bits of a 64-bit Non-Secure world entry physical address
+ * a4-7 Not used
+ *
+ * Normal return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1-7 Preserved
+ *
+ * Error return:
+ * a0 OPTEE_SMC_RETURN_EBADCMD Core index out of range
+ * a1-7 Preserved
+ *
+ * Not idle return register usage:
+ * a0 OPTEE_SMC_RETURN_EBUSY
+ * a1-7 Preserved
+ */
+#define OPTEE_SMC_FUNCID_BOOT_SECONDARY 12
+#define OPTEE_SMC_BOOT_SECONDARY \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_BOOT_SECONDARY)
+
+/*
+ * Inform OP-TEE about a new virtual machine
+ *
+ * Hypervisor issues this call during virtual machine (guest) creation.
+ * OP-TEE records client id of new virtual machine and prepares
+ * to receive requests from it. This call is available only if OP-TEE
+ * was built with virtualization support.
+ *
+ * Call requests usage:
+ * a0 SMC Function ID, OPTEE_SMC_VM_CREATED
+ * a1 Hypervisor Client ID of newly created virtual machine
+ * a2-6 Not used
+ * a7 Hypervisor Client ID register. Must be 0, because only hypervisor
+ * can issue this call
+ *
+ * Normal return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1-7 Preserved
+ *
+ * Error return:
+ * a0 OPTEE_SMC_RETURN_ENOTAVAIL OP-TEE have no resources for
+ * another VM
+ * a1-7 Preserved
+ *
+ */
+#define OPTEE_SMC_FUNCID_VM_CREATED 13
+#define OPTEE_SMC_VM_CREATED \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_VM_CREATED)
+
+/*
+ * Inform OP-TEE about shutdown of a virtual machine
+ *
+ * Hypervisor issues this call during virtual machine (guest) destruction.
+ * OP-TEE will clean up all resources associated with this VM. This call is
+ * available only if OP-TEE was built with virtualization support.
+ *
+ * Call requests usage:
+ * a0 SMC Function ID, OPTEE_SMC_VM_DESTROYED
+ * a1 Hypervisor Client ID of virtual machine being shut down
+ * a2-6 Not used
+ * a7 Hypervisor Client ID register. Must be 0, because only hypervisor
+ * can issue this call
+ *
+ * Normal return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1-7 Preserved
+ *
+ */
+#define OPTEE_SMC_FUNCID_VM_DESTROYED 14
+#define OPTEE_SMC_VM_DESTROYED \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_VM_DESTROYED)
+
+/*
+ * Query OP-TEE about number of supported threads
+ *
+ * Normal World OS or Hypervisor issues this call to find out how many
+ * threads OP-TEE supports. That is how many standard calls can be issued
+ * in parallel before OP-TEE will return OPTEE_SMC_RETURN_ETHREAD_LIMIT.
+ *
+ * Call requests usage:
+ * a0 SMC Function ID, OPTEE_SMC_GET_THREAD_COUNT
+ * a1-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Normal return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1 Number of threads
+ * a2-7 Preserved
+ *
+ * Error return:
+ * a0 OPTEE_SMC_RETURN_UNKNOWN_FUNCTION Requested call is not implemented
+ * a1-7 Preserved
+ */
+#define OPTEE_SMC_FUNCID_GET_THREAD_COUNT 15
+#define OPTEE_SMC_GET_THREAD_COUNT \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_THREAD_COUNT)
+
+/*
+ * Resume from RPC (for example after processing a foreign interrupt)
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC
+ * a1-3 Value of a1-3 when OPTEE_SMC_CALL_WITH_ARG returned
+ * OPTEE_SMC_RETURN_RPC in a0
+ *
+ * Return register usage is the same as for OPTEE_SMC_*CALL_WITH_ARG above.
+ *
+ * Possible return values
+ * OPTEE_SMC_RETURN_UNKNOWN_FUNCTION Trusted OS does not recognize this
+ * function.
+ * OPTEE_SMC_RETURN_OK Original call completed, result
+ * updated in the previously supplied.
+ * struct optee_msg_arg
+ * OPTEE_SMC_RETURN_RPC Call suspended by RPC call to
normal
+ * world.
+ * OPTEE_SMC_RETURN_ERESUME Resume failed, the opaque resume
+ * information was corrupt.
+ */
+#define OPTEE_SMC_FUNCID_RETURN_FROM_RPC 3
+#define OPTEE_SMC_CALL_RETURN_FROM_RPC \
+ OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_RETURN_FROM_RPC)
+
+#define OPTEE_SMC_RETURN_RPC_PREFIX_MASK 0xFFFF0000
+#define OPTEE_SMC_RETURN_RPC_PREFIX 0xFFFF0000
+#define OPTEE_SMC_RETURN_RPC_FUNC_MASK 0x0000FFFF
+
+#define OPTEE_SMC_RETURN_GET_RPC_FUNC(ret) \
+ ((ret) & OPTEE_SMC_RETURN_RPC_FUNC_MASK)
+
+#define OPTEE_SMC_RPC_VAL(func) ((func) |
OPTEE_SMC_RETURN_RPC_PREFIX)
+
+/*
+ * Allocate memory for RPC parameter passing. The memory is used to hold a
+ * struct optee_msg_arg.
+ *
+ * "Call" register usage:
+ * a0 This value, OPTEE_SMC_RETURN_RPC_ALLOC
+ * a1 Size in bytes of required argument memory
+ * a2 Not used
+ * a3 Resume information, must be preserved
+ * a4-5 Not used
+ * a6-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1 Upper 32 bits of 64-bit physical pointer to allocated
+ * memory, (a1 == 0 && a2 == 0) if size was 0 or if memory can't
+ * be allocated.
+ * a2 Lower 32 bits of 64-bit physical pointer to allocated
+ * memory, (a1 == 0 && a2 == 0) if size was 0 or if memory can't
+ * be allocated
+ * a3 Preserved
+ * a4 Upper 32 bits of 64-bit Shared memory cookie used when freeing
+ * the memory or doing an RPC
+ * a5 Lower 32 bits of 64-bit Shared memory cookie used when freeing
+ * the memory or doing an RPC
+ * a6-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_ALLOC 0
+#define OPTEE_SMC_RETURN_RPC_ALLOC \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_ALLOC)
+
+/*
+ * Free memory previously allocated by OPTEE_SMC_RETURN_RPC_ALLOC
+ *
+ * "Call" register usage:
+ * a0 This value, OPTEE_SMC_RETURN_RPC_FREE
+ * a1 Upper 32 bits of 64-bit shared memory cookie belonging to this
+ * argument memory
+ * a2 Lower 32 bits of 64-bit shared memory cookie belonging to this
+ * argument memory
+ * a3-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1-2 Not used
+ * a3-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_FREE 2
+#define OPTEE_SMC_RETURN_RPC_FREE \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_FREE)
+
+/*
+ * Deliver a foreign interrupt in normal world.
+ *
+ * "Call" register usage:
+ * a0 OPTEE_SMC_RETURN_RPC_FOREIGN_INTR
+ * a1-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_FOREIGN_INTR 4
+#define OPTEE_SMC_RETURN_RPC_FOREIGN_INTR \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_FOREIGN_INTR)
+
+/*
+ * Do an RPC request. The supplied struct optee_msg_arg tells which
+ * request to do and the parameters for the request. The following fields
+ * are used (the rest are unused):
+ * - cmd the Request ID
+ * - ret return value of the request, filled in by normal world
+ * - num_params number of parameters for the request
+ * - params the parameters
+ * - param_attrs attributes of the parameters
+ *
+ * "Call" register usage:
+ * a0 OPTEE_SMC_RETURN_RPC_CMD
+ * a1 Upper 32 bits of a 64-bit Shared memory cookie holding a
+ * struct optee_msg_arg, must be preserved, only the data should
+ * be updated
+ * a2 Lower 32 bits of a 64-bit Shared memory cookie holding a
+ * struct optee_msg_arg, must be preserved, only the data should
+ * be updated
+ * a3-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1-2 Not used
+ * a3-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_CMD 5
+#define OPTEE_SMC_RETURN_RPC_CMD \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_CMD)
+
+/* Returned in a0 */
+#define OPTEE_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF
+
+/* Returned in a0 only from Trusted OS functions */
+#define OPTEE_SMC_RETURN_OK 0x0
+#define OPTEE_SMC_RETURN_ETHREAD_LIMIT 0x1
+#define OPTEE_SMC_RETURN_EBUSY 0x2
+#define OPTEE_SMC_RETURN_ERESUME 0x3
+#define OPTEE_SMC_RETURN_EBADADDR 0x4
+#define OPTEE_SMC_RETURN_EBADCMD 0x5
+#define OPTEE_SMC_RETURN_ENOMEM 0x6
+#define OPTEE_SMC_RETURN_ENOTAVAIL 0x7
+#define OPTEE_SMC_RETURN_IS_RPC(ret) \
+ (((ret) != OPTEE_SMC_RETURN_UNKNOWN_FUNCTION) && \
+ ((((ret) & OPTEE_SMC_RETURN_RPC_PREFIX_MASK) == \
+ OPTEE_SMC_RETURN_RPC_PREFIX)))
+
+#endif /* OPTEE_SMC_H */
--
2.21.0
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |