[Xen-devel] [PATCH 1/3] docs/cmdline: Fix markdown syntax

[Andrew Cooper <andrew.cooper3@xxxxxxxxxx>]

 * vwfi needs a closing `.  rmrr needs one as well, and the opening ' switched
   to `
 * The com1/com2 example lines are already verbatim blocks and shouldn't
   escape their underscores.  This ends up in the rendered output.

Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
---
CC: George Dunlap <George.Dunlap@xxxxxxxxxxxxx>
CC: Ian Jackson <ian.jackson@xxxxxxxxxx>
CC: Jan Beulich <JBeulich@xxxxxxxx>
CC: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
CC: Stefano Stabellini <sstabellini@xxxxxxxxxx>
CC: Tim Deegan <tim@xxxxxxx>
CC: Wei Liu <wei.liu2@xxxxxxxxxx>
CC: Julien Grall <julien.grall@xxxxxxx>
---
 docs/misc/xen-command-line.markdown | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/docs/misc/xen-command-line.markdown 
b/docs/misc/xen-command-line.markdown
index 6f671d3..8097b7a 100644
--- a/docs/misc/xen-command-line.markdown
+++ b/docs/misc/xen-command-line.markdown
@@ -348,8 +348,8 @@ The accepted name keywords for name=value pairs are:
 The following are examples of correct specifications:
 
     com1=115200,8n1,0x3f8,4
-    com1=115200,8n1,0x3f8,4,reg\_width=4,reg\_shift=2
-    com1=baud=115200,parity=n,stop\_bits=1,io\_base=0x3f8,reg\_width=4
+    com1=115200,8n1,0x3f8,4,reg_width=4,reg_shift=2
+    com1=baud=115200,parity=n,stop_bits=1,io_base=0x3f8,reg_width=4
 
 ### conring\_size
 > `= <size>`
@@ -1665,7 +1665,7 @@ Specify the host reboot method.
 when running nested Xen)
 
 ### rmrr
-> '= 
start<-end>=[s1]bdf1[,[s1]bdf2[,...]];start<-end>=[s2]bdf1[,[s2]bdf2[,...]]
+> `= 
start<-end>=[s1]bdf1[,[s1]bdf2[,...]];start<-end>=[s2]bdf1[,[s2]bdf2[,...]]`
 
 Define RMRR units that are missing from ACPI table along with device they
 belong to and use them for 1:1 mapping. End addresses can be omitted and one
@@ -2096,7 +2096,7 @@ As the virtualisation is not 100% safe, don't use the 
vpmu flag on
 production systems (see http://xenbits.xen.org/xsa/advisory-163.html)!
 
 ### vwfi (arm)
-> `= trap | native
+> `= trap | native`
 
 > Default: `trap`
 
-- 
2.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel