[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Linux 4.19.5 fails to boot as Xen dom0
On 29/11/2018 15:32, Kirill A. Shutemov wrote: > On Thu, Nov 29, 2018 at 02:24:47PM +0000, Kirill A. Shutemov wrote: >> On Thu, Nov 29, 2018 at 01:35:17PM +0000, Juergen Gross wrote: >>> On 29/11/2018 14:26, Kirill A. Shutemov wrote: >>>> On Thu, Nov 29, 2018 at 09:41:25AM +0000, Juergen Gross wrote: >>>>> On 29/11/2018 02:22, Hans van Kranenburg wrote: >>>>>> Hi, >>>>>> >>>>>> As also seen at: >>>>>> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914951 >>>>>> >>>>>> Attached there are two serial console output logs. One is starting with >>>>>> Xen 4.11 (from debian unstable) as dom0, and the other one without Xen. >>>>>> >>>>>> [ 2.085543] BUG: unable to handle kernel paging request at >>>>>> ffff888d9fffc000 >>>>>> [ 2.085610] PGD 200c067 P4D 200c067 PUD 0 >>>>>> [ 2.085674] Oops: 0000 [#1] SMP NOPTI >>>>>> [ 2.085736] CPU: 1 PID: 1 Comm: swapper/0 Not tainted >>>>>> 4.19.0-trunk-amd64 #1 Debian 4.19.5-1~exp1+pvh1 >>>>>> [ 2.085823] Hardware name: HP ProLiant DL360 G7, BIOS P68 05/21/2018 >>>>>> [ 2.085895] RIP: e030:ptdump_walk_pgd_level_core+0x1fd/0x490 >>>>>> [...] >>>>> >>>>> The offending stable commit is 4074ca7d8a1832921c865d250bbd08f3441b3657 >>>>> ("x86/mm: Move LDT remap out of KASLR region on 5-level paging"), this >>>>> is commit d52888aa2753e3063a9d3a0c9f72f94aa9809c15 upstream. >>>>> >>>>> Current upstream kernel is booting fine under Xen, so in general the >>>>> patch should be fine. Using an upstream kernel built from above commit >>>>> (with the then needed Xen fixup patch 1457d8cf7664f34c4ba534) is fine, >>>>> too. >>>>> >>>>> Kirill, are you aware of any prerequisite patch from 4.20 which could be >>>>> missing in 4.19.5? >>>> >>>> I'm not. >>>> >>>> Let me look into this. >>>> >>> >>> What is making me suspicious is the failure happening just after >>> releasing the init memory. Maybe there is an access to .init.data >>> segment or similar? The native kernel booting could be related to the >>> usage of 2M mappings not being available in a PV-domain. >> >> Ahh.. Could you test this: >> >> diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c >> index a12afff146d1..7dec63ec7aab 100644 >> --- a/arch/x86/mm/dump_pagetables.c >> +++ b/arch/x86/mm/dump_pagetables.c >> @@ -496,7 +496,7 @@ static inline bool is_hypervisor_range(int idx) >> * ffff800000000000 - ffff87ffffffffff is reserved for >> * the hypervisor. >> */ >> - return (idx >= pgd_index(__PAGE_OFFSET) - 16) && >> + return (idx >= pgd_index(__PAGE_OFFSET) - 17) && >> (idx < pgd_index(__PAGE_OFFSET)); >> #else >> return false; > > Or, better, this: That makes it boot again! Any idea why upstream doesn't need it? Juergen > > diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c > index a12afff146d1..8c04fadc4423 100644 > --- a/arch/x86/mm/dump_pagetables.c > +++ b/arch/x86/mm/dump_pagetables.c > @@ -496,8 +496,8 @@ static inline bool is_hypervisor_range(int idx) > * ffff800000000000 - ffff87ffffffffff is reserved for > * the hypervisor. > */ > - return (idx >= pgd_index(__PAGE_OFFSET) - 16) && > - (idx < pgd_index(__PAGE_OFFSET)); > + return (idx >= pgd_index(LDT_BASE_ADDR) - 16) && > + (idx < pgd_index(LDT_BASE_ADDR)); > #else > return false; > #endif > diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c > index 2c84c6ad8b50..b078a5b0ac91 100644 > --- a/arch/x86/xen/mmu_pv.c > +++ b/arch/x86/xen/mmu_pv.c > @@ -652,7 +652,7 @@ static int __xen_pgd_walk(struct mm_struct *mm, pgd_t > *pgd, > * will end up making a zero-sized hole and so is a no-op. > */ > hole_low = pgd_index(USER_LIMIT); > - hole_high = pgd_index(PAGE_OFFSET); > + hole_high = pgd_index(LDT_BASE_ADDR); > > nr = pgd_index(limit) + 1; > for (i = 0; i < nr; i++) { > _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |