|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Xen PV: Sample new PV driver for buffer sharing between domains
Hi, > May I ask why you need the dependency on the rootfs? I am trying to pass-through the display to guest domain. to do through driver needs clocks. I have written simple basic clock pv frontend and backend. So I thought these clocks must be initialised before display driver initialisation. But if I start both domain and clocks script one after another, clock got initialised properly. Problem solved. But still i have some doubt, is it possible to do some thing in xenbits src to start automatically when we start underprivileged domain? I have one more question about pass-through To implement pass through I took reference from below link I added 'xen-passthrough' to actual dom0 dtb and created new dtb with below nodes in passthrough node ============================================================================ dpe: dpe@10004000 { compatible = "hisilicon,hi3660-dpe"; status = "ok"; #if 0 //ACTUAL REG PROPERTY of DISPLAY reg = <0x0 0xE8600000 0x0 0x80000>, <0x0 0xFFF35000 0 0x1000>, <0x0 0xFFF0A000 0 0x1000>, <0x0 0xFFF31000 0 0x1000>, <0x0 0xE86C0000 0 0x10000>; #endif //reg = <0x0 0x10004000 0x0 0x80000>, reg = <0x0 0x10004000 0x0 0x80000>, <0x0 0x10084000 0 0x1000>, <0x0 0x10085000 0 0x1000>, <0x0 0x10086000 0 0x1000>, <0x0 0x100C4000 0 0x10000>; // <0x0 0x10087000 0 0x10000>; interrupts = <0 245 4>; clocks = <&clk_xen HI3660_ACLK_GATE_DSS>, <&clk_xen HI3660_PCLK_GATE_DSS>, <&clk_xen HI3660_CLK_GATE_EDC0>, <&clk_xen HI3660_CLK_GATE_LDI0>, <&clk_xen HI3660_CLK_GATE_LDI1>, <&clk_xen HI3660_CLK_GATE_DSS_AXI_MM>, <&clk_xen HI3660_PCLK_GATE_MMBUF>; clock-names = "aclk_dss", "pclk_dss", "clk_edc0", "clk_ldi0", "clk_ldi1", "clk_dss_axi_mm", "pclk_mmbuf"; dma-coherent; port { dpe_out: endpoint { remote-endpoint = <&dsi_in>; }; }; }; dsi: dsi@10097000 { compatible = "hisilicon,hi3660-dsi"; status = "ok"; #if 0 //ACTUAL REG PROPERTY of DISPLAY reg = <0 0xE8601000 0 0x7F000>, <0 0xFFF35000 0 0x1000>; #endif // reg = <0 0x10097000 0 0x7F000>, // <0 0x10116000 0 0x1000>; reg = <0 0x10004000 0 0x80000>, <0 0x10084000 0 0x1000>; clocks = <&clk_xen HI3660_CLK_GATE_TXDPHY0_REF>, <&clk_xen HI3660_CLK_GATE_TXDPHY1_REF>, <&clk_xen HI3660_CLK_GATE_TXDPHY0_CFG>, <&clk_xen HI3660_CLK_GATE_TXDPHY1_CFG>, <&clk_xen HI3660_PCLK_GATE_DSI0>, <&clk_xen HI3660_PCLK_GATE_DSI1>; clock-names = "clk_txdphy0_ref", "clk_txdphy1_ref", "clk_txdphy0_cfg", "clk_txdphy1_cfg", "pclk_dsi0", "pclk_dsi1"; #address-cells = <1>; #size-cells = <0>; }; #endif clocks { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges; clk_xen: xen_clk@0 { compatible = "xen,xen-vclk"; #clock-cells = <1>; }; }; ============================================================================ Below is my 'debian.cfg' file: ============================================================================ kernel = "/debian/Image" device_tree="/debian/domu.dtb" memory = 512 vcpus = 8 cpus = "all" name="debian" ################# DPE ################ #iomem = [ "0xE8600,0x80@0x10004", "0xFFF35,1@0x10084", "0xFFF0A,1@0x10085", "0xFFF31,1@0x10086", "0xE86C0,10@0x10087"] #iomem = [ "0xE8600,0x80", "0xFFF35,1", "0xFFF0A,1", "0xFFF31,1", "0xE86C0,10"] irqs = [ 277 ] iomem = [ "0xE8600,80@0x10004" ] iomem = [ "0xFFF35,1@0x10084" ] iomem = [ "0xFFF0A,1@0x10085" ] iomem = [ "0xFFF31,1@0x10086" ] iomem = [ "0xE86C0,10@0x100C4"] #iomem = [ "0xE86C0,10@0x10087"] #iomem = [ "0xE8600,80@0x00000" ] ################# DPE ################ ################# DSI ################ #iomem = [ "0xE8601,0x7F", "0xFFF35,1"] #iomem = [ "0xE8601,0x7F@0x10097", "0xFFF35,1@0x10116", "0xE8601,0x7F@0x10195"] #iomem = [ "0xE8601,7F@0x10097" ] #iomem = [ "0xFFF35,1@0x10116" ] iomem = [ "0xE8601,7F@0x10005" ] iomem = [ "0xFFF35,1@0x10084" ] ################# DSI ################ #vif = ['mac=00:16:3e:64:b8:40,bridge=xenbr0'] #nics = 1 #vif = [ 'eth0=00:60:00:00:00:01' ] disk = ['/dev/loop1,raw,xvda,w'] extra = "earlyprintk=xenboot console=hvc0 root=/dev/xvda rootfstype=ext4 rw video=HDMI-A-1:1280x720@60" ============================================================================ Here I am using same io space(GFNs) for DPE and DSI nodes, and having same below error and tried with different GFNs and giving same error. But adding this, Every thing is good but when i am trying to remap iomem second time, having below error ============================================================================ [ 3.215021] OF: rrrrrrrrrrrr: start: 0x10004000, sz = 0x80000 [ 3.215062] [DISPLAY] dsi_parse_dt(): 1536: of device: /passthrough/dsi@10097000 [ 3.215083] [DISPLAY] dsi_parse_dt(): 1537: +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ [ 3.215108] [DISPLAY] dsi_parse_dt(): 1540: ctx->base: ffffff800bd01000 [ 3.215126] [DISPLAY] dsi_parse_dt(): 1541: [ 3.215136] OF: rrrrrrrrrrrr: start: 0x10084000, sz = 0x1000 [ 3.215169] [DISPLAY] dsi_parse_dt(): 1548: [ 4.159087] [DISPLAY] dsi_parse_dt(): 1563: [ 4.159092] [DISPLAY] dsi_parse_dt(): 1568: [ 4.159132] [D][XEN_VCLK]xen_vclk_xfer(): 163: buffer: clk_txdphy0_ref,1 [ 4.159163] [D][XEN_VCLK]xen_vclk_xfer(): 164: ******************************************* [ 4.159399] [D][XEN_VCLK]xen_vclk_xfer(): 170: ******************************************* [ 4.159626] [D][XEN_VCLK]xen_vclk_xfer(): 176: Sending IRQ_DATA to domain-0 [ 4.160218] [D][XEN_VCLK]xen_vclk_interrupt(): 446: IRQ(13) from domain 0 fired!!! [ 4.160359] [D][XEN_VCLK]vclk_fe_bh(): 394: irq_status: 0x3 [ 4.160532] [D][XEN_VCLK]vclk_fe_bh(): 407: ACK Recieved from dom-0 [ 4.160542] [D][XEN_VCLK]xen_vclk_xfer(): 179: Xfer Done [ 4.160545] [D][XEN_VCLK]xen_of_clk_src_onecell_get(): 286: Xfer done... [ 4.160554] [DISPLAY] dsi_parse_dt(): 1575: [ 4.160560] [D][XEN_VCLK]vclk_round_rate(): 224: called... [ 4.160567] [D][XEN_VCLK]xen_vclk_xfer(): 163: buffer: clk_txdphy0_ref,4,19200000 [ 4.160570] [D][XEN_VCLK]xen_vclk_xfer(): 164: ******************************************* [ 4.161095] [D][XEN_VCLK]xen_vclk_xfer(): 170: ******************************************* [ 4.161331] [D][XEN_VCLK]xen_vclk_xfer(): 176: Sending IRQ_DATA to domain-0 [ 4.161946] [D][XEN_VCLK]xen_vclk_interrupt(): 446: IRQ(13) from domain 0 fired!!! [ 4.162120] [D][XEN_VCLK]vclk_fe_bh(): 394: irq_status: 0x3 [ 4.162284] [D][XEN_VCLK]vclk_fe_bh(): 407: ACK Recieved from dom-0 [ 4.162295] [D][XEN_VCLK]xen_vclk_xfer(): 179: Xfer Done [ 4.162301] [DISPLAY] dsi_parse_dt(): 1583: [ 4.162314] [D][XEN_VCLK]xen_vclk_xfer(): 163: buffer: clk_txdphy0_cfg,1 [ 4.162316] [D][XEN_VCLK]xen_vclk_xfer(): 164: ******************************************* [ 4.162641] [D][XEN_VCLK]xen_vclk_xfer(): 170: ******************************************* [ 4.162984] [D][XEN_VCLK]xen_vclk_xfer(): 176: Sending IRQ_DATA to domain-0 [ 4.163596] [D][XEN_VCLK]xen_vclk_interrupt(): 446: IRQ(13) from domain 0 fired!!! [ 4.167753] [D][XEN_VCLK]vclk_fe_bh(): 394: irq_status: 0x3 [ 4.167955] [D][XEN_VCLK]vclk_fe_bh(): 407: ACK Recieved from dom-0 [ 4.167968] [D][XEN_VCLK]xen_vclk_xfer(): 179: Xfer Done [ 4.167971] [D][XEN_VCLK]xen_of_clk_src_onecell_get(): 286: Xfer done... [ 4.167979] [DISPLAY] dsi_parse_dt(): 1593: [ 4.167982] [D][XEN_VCLK]vclk_round_rate(): 224: called... [ 4.167985] [D][XEN_VCLK]xen_vclk_xfer(): 163: buffer: clk_txdphy0_cfg,4,19200000 [ 4.167992] [D][XEN_VCLK]xen_vclk_xfer(): 164: ******************************************* [ 4.168244] [D][XEN_VCLK]xen_vclk_xfer(): 170: ******************************************* [ 4.168476] [D][XEN_VCLK]xen_vclk_xfer(): 176: Sending IRQ_DATA to domain-0 [ 4.169101] [D][XEN_VCLK]xen_vclk_interrupt(): 446: IRQ(13) from domain 0 fired!!! [ 4.169262] [D][XEN_VCLK]vclk_fe_bh(): 394: irq_status: 0x3 [ 4.169448] [D][XEN_VCLK]vclk_fe_bh(): 407: ACK Recieved from dom-0 [ 4.169491] [D][XEN_VCLK]xen_vclk_xfer(): 179: Xfer Done [ 4.169510] [DISPLAY] dsi_parse_dt(): 1601: [ 4.169535] [D][XEN_VCLK]xen_vclk_xfer(): 163: buffer: pclk_dsi0,1 [ 4.169554] [D][XEN_VCLK]xen_vclk_xfer(): 164: ******************************************* [ 4.169803] [D][XEN_VCLK]xen_vclk_xfer(): 170: ******************************************* [ 4.170019] [D][XEN_VCLK]xen_vclk_xfer(): 176: Sending IRQ_DATA to domain-0 [ 4.170619] [D][XEN_VCLK]xen_vclk_interrupt(): 446: IRQ(13) from domain 0 fired!!! [ 4.170779] [D][XEN_VCLK]vclk_fe_bh(): 394: irq_status: 0x3 [ 4.170965] [D][XEN_VCLK]vclk_fe_bh(): 407: ACK Recieved from dom-0 [ 4.170978] [D][XEN_VCLK]xen_vclk_xfer(): 179: Xfer Done [ 4.170981] [D][XEN_VCLK]xen_of_clk_src_onecell_get(): 286: Xfer done... [ 4.170989] [DISPLAY] dsi_parse_dt(): 1611: [ 4.170992] [DISPLAY] dsi_probe(): 1654: Before component add [ 4.170997] [DISPLAY] compare_of(): 242: [ 4.171002] [DISPLAY] kirin_drm_bind(): 257: [ 4.171004] [drm] +. [ 4.171386] [DISPLAY] kirin_drm_kms_init(): 105: [ 4.171391] [drm] +. [ 4.212543] [DISPLAY] kirin_drm_mode_config_init(): 91: [ 4.212547] [DISPLAY] dss_drm_init(): 638: [ 4.212563] [drm] +. [ 4.212585] [DISPLAY] dss_dts_parse(): 513: [ 4.212603] [DISPLAY] dss_dts_parse(): 530: of device: /passthrough/dpe@10004000 [ 4.212635] [DISPLAY] dss_dts_parse(): 531: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [ 4.212661] [DISPLAY] dss_dts_parse(): 532: ctx->base: ffffff800bd00000 [ 4.212688] Unhandled fault: ttbr address size fault (0x96000000) at 0xffffff800bd01000 [ 4.212708] Mem abort info: [ 4.212720] Exception class = DABT (current EL), IL = 32 bits [ 4.212738] SET = 0, FnV = 0 [ 4.212751] EA = 0, S1PTW = 0 [ 4.212763] Data abort info: [ 4.212776] ISV = 0, ISS = 0x00000000 [ 4.212789] CM = 0, WnR = 0 [ 4.212806] Internal error: : 96000000 [#1] PREEMPT SMP [ 4.212821] Modules linked in: [ 4.212839] CPU: 7 PID: 99 Comm: kworker/7:1 Tainted: G S 4.14.0-rc7 #456 [ 4.212857] Hardware name: XENVM-4.8 (DT) [ 4.212878] Workqueue: events deferred_probe_work_func [ 4.212893] task: ffffffc01abe6000 task.stack: ffffff8009878000 [ 4.212916] PC is at dss_drm_init+0x1a8/0x680 [ 4.212931] LR is at dss_drm_init+0x1a0/0x680 [ 4.212945] pc : [<ffffff80087061d0>] lr : [<ffffff80087061c8>] pstate: 40000045 [ 4.212963] sp : ffffff800987ba20 [ 4.212973] x29: ffffff800987ba30 x28: ffffffc01bff42e8 [ 4.212990] x27: ffffff800bd01000 x26: ffffffc018d25760 [ 4.213006] x25: ffffff80090f8c70 x24: ffffffc017212800 [ 4.213023] x23: ffffff8008e32000 x22: ffffff80090f8000 [ 4.213039] x21: ffffff8008e32748 x20: ffffffc018d25018 [ 4.213055] x19: ffffffc01abdf810 x18: 0000000000000010 [ 4.213071] x17: 000000000000000e x16: 0000000000000020 [ 4.213087] x15: ffffffffffffffff x14: ffffff80894c6157 [ 4.213104] x13: ffffff80094c6165 x12: ffffff8009379000 [ 4.213120] x11: 0000000005f5e0ff x10: ffffff800987b6f0 [ 4.257555] x9 : 00000000ffffffd0 x8 : 000000000000004b [ 4.257573] x7 : 000000000000000c x6 : 00000000000001ee [ 4.257591] x5 : 0000000000007ceb x4 : 0000000000000000 [ 4.257608] x3 : ffffff800934a000 x2 : 0000000000000000 [ 4.257625] x1 : 0000000000000000 x0 : 000000000000003b [ 4.257644] Process kworker/7:1 (pid: 99, stack limit = 0xffffff8009878000) [ 4.257661] Call trace: [ 4.257672] Exception stack(0xffffff800987b8e0 to 0xffffff800987ba20) [ 4.257691] b8e0: 000000000000003b 0000000000000000 0000000000000000 ffffff800934a000 [ 4.257713] b900: 0000000000000000 0000000000007ceb 00000000000001ee 000000000000000c [ 4.257734] b920: 000000000000004b 00000000ffffffd0 ffffff800987b6f0 0000000005f5e0ff [ 4.257756] b940: ffffff8009379000 ffffff80094c6165 ffffff80894c6157 ffffffffffffffff [ 4.257777] b960: 0000000000000020 000000000000000e 0000000000000010 ffffffc01abdf810 [ 4.257799] b980: ffffffc018d25018 ffffff8008e32748 ffffff80090f8000 ffffff8008e32000 [ 4.257821] b9a0: ffffffc017212800 ffffff80090f8c70 ffffffc018d25760 ffffff800bd01000 [ 4.257842] b9c0: ffffffc01bff42e8 ffffff800987ba30 ffffff80087061c8 ffffff800987ba20 [ 4.257864] b9e0: ffffff80087061d0 0000000040000045 0000000000000214 ffffff800bd00000 [ 4.257885] ba00: ffffffffffffffff 0000000000007c9f ffffff800987ba30 ffffff80087061d0 [ 4.257908] [<ffffff80087061d0>] dss_drm_init+0x1a8/0x680 [ 4.257926] [<ffffff8008705490>] kirin_drm_bind+0x128/0x310 [ 4.257945] [<ffffff8008740c88>] try_to_bring_up_master+0x180/0x1e0 [ 4.257965] [<ffffff8008740d8c>] component_add+0xa4/0x170 [ 4.257981] [<ffffff800870b574>] dsi_probe+0x52c/0x5a0 [ 4.258000] [<ffffff8008749d60>] platform_drv_probe+0x60/0xc0 [ 4.258018] [<ffffff8008747a94>] driver_probe_device+0x234/0x2e0 [ 4.258037] [<ffffff8008747cb0>] __device_attach_driver+0xa0/0xe8 [ 4.258056] [<ffffff80087459d0>] bus_for_each_drv+0x58/0xa8 [ 4.258072] [<ffffff80087476e8>] __device_attach+0xc8/0x138 [ 4.302470] [<ffffff8008747d74>] device_initial_probe+0x24/0x30 [ 4.302490] [<ffffff8008746ae4>] bus_probe_device+0x9c/0xa8 [ 4.302506] [<ffffff8008746fcc>] deferred_probe_work_func+0xac/0x150 [ 4.302528] [<ffffff80080efd98>] process_one_work+0x1d8/0x490 [ 4.302547] [<ffffff80080f0298>] worker_thread+0x248/0x478 [ 4.302565] [<ffffff80080f6728>] kthread+0x138/0x140 [ 4.302584] [<ffffff8008084d7c>] ret_from_fork+0x10/0x1c [ 4.302601] Code: f90037a4 97e8a1ea f943a69b 9140077b (b940037b) [ 4.302621] ---[ end trace d64c23a811313502 ]--- [ 4.302638] Kernel panic - not syncing: Fatal exception [ 4.302656] SMP: stopping secondary CPUs [ 4.332694] Kernel Offset: disabled [ 4.332708] CPU features: 0x002004 [ 4.332720] Memory Limit: none [ 4.332736] Rebooting in 5 seconds.. ============================================================================ How to fix this IO addr size fault, I think some problem in dts or debian.cfg to map Physical addresses to GFNs Please help me to come out of this problem. Thanks Omkar B On Thu, Nov 1, 2018 at 1:11 AM Julien Grall <julien.grall@xxxxxxx> wrote:
This message contains confidential information and is intended only for the individual(s) named. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this mail and attached file/s is strictly prohibited. Please notify the sender immediately and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secured or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |