[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH net-next] xen-netfront: fix warn message as irq device name has '/'
On 09/08/18 08:03, Xiao Liang wrote: > There is a call trace generated after commit > 2d408c0d4574b01b9ed45e02516888bf925e11a9( > xen-netfront: fix queue name setting). There is no 'device/vif/xx-q0-tx' file > found > under /proc/irq/xx/. > > This patch only picks up device type and id as its name. > > With the patch, now /proc/interrupts looks like and the warning message gone: > 70: 21 0 0 0 xen-dyn -event > vif0-q0-tx > 71: 15 0 0 0 xen-dyn -event > vif0-q0-rx > 72: 14 0 0 0 xen-dyn -event > vif0-q1-tx > 73: 33 0 0 0 xen-dyn -event > vif0-q1-rx > 74: 12 0 0 0 xen-dyn -event > vif0-q2-tx > 75: 24 0 0 0 xen-dyn -event > vif0-q2-rx > 76: 19 0 0 0 xen-dyn -event > vif0-q3-tx > 77: 21 0 0 0 xen-dyn -event > vif0-q3-rx > > Below is call trace information without this patch: > > name 'device/vif/0-q0-tx' > WARNING: CPU: 2 PID: 37 at fs/proc/generic.c:174 __xlate_proc_name+0x85/0xa0 > RIP: 0010:__xlate_proc_name+0x85/0xa0 > RSP: 0018:ffffb85c40473c18 EFLAGS: 00010286 > RAX: 0000000000000000 RBX: 0000000000000006 RCX: 0000000000000006 > RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff984c7f516930 > RBP: ffffb85c40473cb8 R08: 000000000000002c R09: 0000000000000229 > R10: 0000000000000000 R11: 0000000000000001 R12: ffffb85c40473c98 > R13: ffffb85c40473cb8 R14: ffffb85c40473c50 R15: 0000000000000000 > FS: 0000000000000000(0000) GS:ffff984c7f500000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00007f69b6899038 CR3: 000000001c20a006 CR4: 00000000001606e0 > Call Trace: > __proc_create+0x45/0x230 > ? snprintf+0x49/0x60 > proc_mkdir_data+0x35/0x90 > register_handler_proc+0xef/0x110 > ? proc_register+0xfc/0x110 > ? proc_create_data+0x70/0xb0 > __setup_irq+0x39b/0x660 > ? request_threaded_irq+0xad/0x160 > request_threaded_irq+0xf5/0x160 > ? xennet_tx_buf_gc+0x1d0/0x1d0 [xen_netfront] > bind_evtchn_to_irqhandler+0x3d/0x70 > ? xenbus_alloc_evtchn+0x41/0xa0 > netback_changed+0xa46/0xcda [xen_netfront] > ? find_watch+0x40/0x40 > xenwatch_thread+0xc5/0x160 > ? finish_wait+0x80/0x80 > kthread+0x112/0x130 > ? kthread_create_worker_on_cpu+0x70/0x70 > ret_from_fork+0x35/0x40 > Code: 81 5c 00 48 85 c0 75 cc 5b 49 89 2e 31 c0 5d 4d 89 3c 24 41 5c 41 5d 41 > 5e 41 5f c3 4c 89 ee 48 c7 c7 40 4f 0e b4 e8 65 ea d8 ff <0f> 0b b8 fe ff ff > ff 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 0f 1f > ---[ end trace 650e5561b0caab3a ]--- > > Signed-off-by: Xiao Liang <xiliang@xxxxxxxxxx> > --- > drivers/net/xen-netfront.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c > index 799cba4624a5..6f40df4a452e 100644 > --- a/drivers/net/xen-netfront.c > +++ b/drivers/net/xen-netfront.c > @@ -1604,14 +1604,16 @@ static int xennet_init_queue(struct netfront_queue > *queue) > { > unsigned short i; > int err = 0; > + int devid = 0; > > spin_lock_init(&queue->tx_lock); > spin_lock_init(&queue->rx_lock); > > timer_setup(&queue->rx_refill_timer, rx_refill_timeout, 0); > > - snprintf(queue->name, sizeof(queue->name), "%s-q%u", > - queue->info->xbdev->nodename, queue->id); > + kstrtoint(strrchr(queue->info->xbdev->nodename,'/')+1, 10, &devid); Please add blanks before '/' and around the +. With that you can add my: Reviewed-by: Juergen Gross <jgross@xxxxxxxx> Juergen _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |