|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [xen-4.11-testing test] 124876: trouble: blocked/broken/fail/pass
flight 124876 xen-4.11-testing real [real] http://logs.test-lab.xenproject.org/osstest/logs/124876/ Failures and problems with tests :-( Tests which did not succeed and are blocking, including tests which could not be run: build-armhf <job status> broken Tests which did not succeed, but are not blocking: build-armhf-libvirt 1 build-check(1) blocked n/a test-armhf-armhf-xl-vhd 1 build-check(1) blocked n/a test-armhf-armhf-xl-multivcpu 1 build-check(1) blocked n/a test-armhf-armhf-xl-credit2 1 build-check(1) blocked n/a test-armhf-armhf-libvirt 1 build-check(1) blocked n/a test-armhf-armhf-libvirt-xsm 1 build-check(1) blocked n/a test-armhf-armhf-xl-arndale 1 build-check(1) blocked n/a test-armhf-armhf-xl 1 build-check(1) blocked n/a test-armhf-armhf-libvirt-raw 1 build-check(1) blocked n/a test-armhf-armhf-xl-rtds 1 build-check(1) blocked n/a test-armhf-armhf-xl-cubietruck 1 build-check(1) blocked n/a build-armhf 4 host-install(4) broken like 124696 test-amd64-amd64-xl-qemuu-dmrestrict-amd64-dmrestrict 10 debian-hvm-install fail never pass test-amd64-i386-xl-pvshim 12 guest-start fail never pass test-amd64-i386-xl-qemuu-dmrestrict-amd64-dmrestrict 10 debian-hvm-install fail never pass test-amd64-amd64-libvirt-xsm 13 migrate-support-check fail never pass test-amd64-amd64-libvirt 13 migrate-support-check fail never pass test-amd64-i386-libvirt-xsm 13 migrate-support-check fail never pass test-arm64-arm64-xl-xsm 13 migrate-support-check fail never pass test-arm64-arm64-xl-xsm 14 saverestore-support-check fail never pass test-arm64-arm64-xl-credit2 13 migrate-support-check fail never pass test-arm64-arm64-xl-credit2 14 saverestore-support-check fail never pass test-arm64-arm64-xl 13 migrate-support-check fail never pass test-arm64-arm64-xl 14 saverestore-support-check fail never pass test-amd64-i386-libvirt 13 migrate-support-check fail never pass test-arm64-arm64-libvirt-xsm 13 migrate-support-check fail never pass test-arm64-arm64-libvirt-xsm 14 saverestore-support-check fail never pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check fail never pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check fail never pass test-armhf-armhf-xl-xsm 13 migrate-support-check fail never pass test-armhf-armhf-xl-xsm 14 saverestore-support-check fail never pass test-amd64-amd64-libvirt-vhd 12 migrate-support-check fail never pass test-amd64-amd64-qemuu-nested-amd 17 debian-hvm-install/l1/l2 fail never pass test-amd64-i386-xl-qemuu-win7-amd64 17 guest-stop fail never pass test-amd64-amd64-xl-qemuu-win7-amd64 17 guest-stop fail never pass test-amd64-i386-xl-qemut-win7-amd64 17 guest-stop fail never pass test-amd64-amd64-xl-qemuu-ws16-amd64 17 guest-stop fail never pass test-amd64-i386-xl-qemuu-ws16-amd64 17 guest-stop fail never pass test-amd64-amd64-xl-qemut-win7-amd64 17 guest-stop fail never pass test-amd64-i386-xl-qemut-ws16-amd64 17 guest-stop fail never pass test-amd64-amd64-xl-qemut-ws16-amd64 17 guest-stop fail never pass test-amd64-amd64-xl-qemut-win10-i386 10 windows-install fail never pass test-amd64-amd64-xl-qemuu-win10-i386 10 windows-install fail never pass test-amd64-i386-xl-qemuu-win10-i386 10 windows-install fail never pass test-amd64-i386-xl-qemut-win10-i386 10 windows-install fail never pass version targeted for testing: xen eb17ff9ce6a99a8761d3f4768703691f34043356 baseline version: xen 437211cb696515ee5bd5dae0ab72866c9f382a33 Last test of basis 124696 2018-06-25 14:43:36 Z 6 days Testing same since 124792 2018-06-28 14:26:28 Z 3 days 2 attempts ------------------------------------------------------------ People who touched revisions under test: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx> Jan Beulich <jbeulich@xxxxxxxx> Juergen Gross <jgross@xxxxxxxx> Paul Durrant <paul.durrant@xxxxxxxxxx> jobs: build-amd64-xsm pass build-arm64-xsm pass build-armhf-xsm pass build-i386-xsm pass build-amd64-xtf pass build-amd64 pass build-arm64 pass build-armhf broken build-i386 pass build-amd64-libvirt pass build-arm64-libvirt pass build-armhf-libvirt blocked build-i386-libvirt pass build-amd64-prev pass build-i386-prev pass build-amd64-pvops pass build-arm64-pvops pass build-armhf-pvops pass build-i386-pvops pass build-amd64-rumprun pass build-i386-rumprun pass test-xtf-amd64-amd64-1 pass test-xtf-amd64-amd64-2 pass test-xtf-amd64-amd64-3 pass test-xtf-amd64-amd64-4 pass test-xtf-amd64-amd64-5 pass test-amd64-amd64-xl pass test-arm64-arm64-xl pass test-armhf-armhf-xl blocked test-amd64-i386-xl pass test-amd64-amd64-xl-qemut-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemut-debianhvm-amd64-xsm pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-xl-qemut-stubdom-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemut-stubdom-debianhvm-amd64-xsm pass test-amd64-amd64-libvirt-xsm pass test-arm64-arm64-libvirt-xsm pass test-armhf-armhf-libvirt-xsm blocked test-amd64-i386-libvirt-xsm pass test-amd64-amd64-xl-xsm pass test-arm64-arm64-xl-xsm pass test-armhf-armhf-xl-xsm pass test-amd64-i386-xl-xsm pass test-amd64-amd64-qemuu-nested-amd fail test-amd64-amd64-xl-pvhv2-amd pass test-amd64-i386-qemut-rhel6hvm-amd pass test-amd64-i386-qemuu-rhel6hvm-amd pass test-amd64-amd64-xl-qemut-debianhvm-amd64 pass test-amd64-i386-xl-qemut-debianhvm-amd64 pass test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-freebsd10-amd64 pass test-amd64-amd64-xl-qemuu-ovmf-amd64 pass test-amd64-i386-xl-qemuu-ovmf-amd64 pass test-amd64-amd64-rumprun-amd64 pass test-amd64-amd64-xl-qemut-win7-amd64 fail test-amd64-i386-xl-qemut-win7-amd64 fail test-amd64-amd64-xl-qemuu-win7-amd64 fail test-amd64-i386-xl-qemuu-win7-amd64 fail test-amd64-amd64-xl-qemut-ws16-amd64 fail test-amd64-i386-xl-qemut-ws16-amd64 fail test-amd64-amd64-xl-qemuu-ws16-amd64 fail test-amd64-i386-xl-qemuu-ws16-amd64 fail test-armhf-armhf-xl-arndale blocked test-amd64-amd64-xl-credit2 pass test-arm64-arm64-xl-credit2 pass test-armhf-armhf-xl-credit2 blocked test-armhf-armhf-xl-cubietruck blocked test-amd64-amd64-xl-qemuu-dmrestrict-amd64-dmrestrict fail test-amd64-i386-xl-qemuu-dmrestrict-amd64-dmrestrict fail test-amd64-i386-freebsd10-i386 pass test-amd64-i386-rumprun-i386 pass test-amd64-amd64-xl-qemut-win10-i386 fail test-amd64-i386-xl-qemut-win10-i386 fail test-amd64-amd64-xl-qemuu-win10-i386 fail test-amd64-i386-xl-qemuu-win10-i386 fail test-amd64-amd64-qemuu-nested-intel pass test-amd64-amd64-xl-pvhv2-intel pass test-amd64-i386-qemut-rhel6hvm-intel pass test-amd64-i386-qemuu-rhel6hvm-intel pass test-amd64-amd64-libvirt pass test-armhf-armhf-libvirt blocked test-amd64-i386-libvirt pass test-amd64-amd64-migrupgrade pass test-amd64-i386-migrupgrade pass test-amd64-amd64-xl-multivcpu pass test-armhf-armhf-xl-multivcpu blocked test-amd64-amd64-pair pass test-amd64-i386-pair pass test-amd64-amd64-libvirt-pair pass test-amd64-i386-libvirt-pair pass test-amd64-amd64-amd64-pvgrub pass test-amd64-amd64-i386-pvgrub pass test-amd64-amd64-xl-pvshim pass test-amd64-i386-xl-pvshim fail test-amd64-amd64-pygrub pass test-amd64-amd64-xl-qcow2 pass test-armhf-armhf-libvirt-raw blocked test-amd64-i386-xl-raw pass test-amd64-amd64-xl-rtds pass test-armhf-armhf-xl-rtds blocked test-amd64-amd64-xl-qemuu-debianhvm-amd64-shadow pass test-amd64-i386-xl-qemuu-debianhvm-amd64-shadow pass test-amd64-amd64-xl-shadow pass test-amd64-i386-xl-shadow pass test-amd64-amd64-libvirt-vhd pass test-armhf-armhf-xl-vhd blocked ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary broken-job build-armhf broken broken-step build-armhf host-install(4) Not pushing. ------------------------------------------------------------ commit eb17ff9ce6a99a8761d3f4768703691f34043356 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Thu Jun 28 09:39:45 2018 +0200 x86: guard against #NM Just in case we still don't get CR0.TS handling right, prevent a host crash by honoring exception fixups in do_device_not_available(). This would in particular cover emulator stubs raising #NM. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Release-acked-by: Juergen Gross <jgross@xxxxxxxx> master commit: 00cebd6f22beb6d5fa65ed2d8d1ff9acf59bce61 master date: 2018-06-28 09:08:04 +0200 commit 959353ad4aebb8c26c71c7650a449d2618d3a720 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Thu Jun 28 09:39:09 2018 +0200 x86/HVM: don't cause #NM to be raised in Xen The changes for XSA-267 did not touch management of CR0.TS for HVM guests. In fully eager mode this bit should never be set when respective vCPU-s are active, or else hvmemul_get_fpu() might leave it wrongly set, leading to #NM in hypervisor context. {svm,vmx}_enter() and {svm,vmx}_fpu_dirty_intercept() become unreachable this way. Explicit {svm,vmx}_fpu_leave() invocations need to be guarded now. With no CR0.TS management necessary in fully eager mode, there's also no need anymore to intercept #NM. Reported-by: Charles Arnold <carnold@xxxxxxxx> Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Release-acked-by: Juergen Gross <jgross@xxxxxxxx> master commit: 488efc29e4e996bb3805c982200f65061390cdce master date: 2018-06-28 09:07:06 +0200 commit b33b61105c1ab1facf01ab7f46d2aae3a71fcd11 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Thu Jun 28 09:38:48 2018 +0200 libxl: restore passing "readonly=" to qemu for SCSI disks A read-only check was introduced for XSA-142, commit ef6cb76026 ("libxl: relax readonly check introduced by XSA-142 fix") added the passing of the extra setting, but commit dab0539568 ("Introduce COLO mode and refactor relevant function") dropped the passing of the setting again, quite likely due to improper re-basing. Restore the readonly= parameter to SCSI disks. For IDE disks this is supposed to be rejected; add an assert. And there is a bare ad-hoc disk drive string in libxl__build_device_model_args_new, which we also update. This is XSA-266. Reported-by: Andrew Reimers <andrew.reimers@xxxxxxxxxxx> Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Signed-off-by: Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx> master commit: dd64d3c41a2d15139c3a35d22d4cb6b78f4c5c59 master date: 2018-06-28 09:05:06 +0200 commit 3075d22f10af8232c363fa84144e7c34dc004485 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Thu Jun 28 09:38:34 2018 +0200 libxl: qemu_disk_scsi_drive_string: Break out common parts of disk config The generated configurations are identical apart from, in some cases, reordering of the id=%s element. So, overall, no functional change. This is part of XSA-266. Reported-by: Andrew Reimers <andrew.reimers@xxxxxxxxxxx> Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Signed-off-by: Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx> master commit: 724e5aa31b58d1e430ad36b484cf0ec021497399 master date: 2018-06-28 09:04:55 +0200 commit 8d3638489181d854497fd7bd87116ed63af0de8f Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Thu Jun 28 09:37:57 2018 +0200 x86: Refine checks in #DB handler for faulting conditions One of the fix for XSA-260 (c/s 75d6828bc2 "x86/traps: Fix handling of #DB exceptions in hypervisor context") added some safety checks to help avoid livelocks of #DB faults. While a General Detect #DB exception does have fault semantics, hardware clears %dr7.gd on entry to the handler, meaning that it is actually safe to return to. Furthermore, %dr6.gd is guest controlled and sticky (never cleared by hardware). A malicious PV guest can therefore trigger the fatal_trap() and crash Xen. Instruction breakpoints are more tricky. The breakpoint match bits in %dr6 are not sticky, but the Intel manual warns that they may be set for non-enabled breakpoints, so add a breakpoint enabled check. Beyond that, because of the restriction on the linear addresses PV guests can set, and the fault (rather than trap) nature of instruction breakpoints (i.e. can't be deferred by a MovSS shadow), there should be no way to encounter an instruction breakpoint in Xen context. However, for extra robustness, deal with this situation by clearing the breakpoint configuration, rather than crashing. This is XSA-265 Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> master commit: 17bf51297220dcd74da29de99320b6b1c72d1fa5 master date: 2018-06-28 09:04:20 +0200 commit 2f8582d4759c9f7733f360ba3e73901376949166 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Thu Jun 28 09:37:18 2018 +0200 x86/mm: don't bypass preemption checks While unlikely, it is not impossible for a multi-vCPU guest to leverage bypasses of preemption checks to drive Xen into an unbounded loop. This is XSA-264. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> master commit: 17608703c65bf080b0a9f024f9b370872b9f2c05 master date: 2018-06-28 09:03:09 +0200 commit b4cf1d608bb7d73d7827d794d4d3b7f19de8c274 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Tue Jun 26 15:26:24 2018 +0200 x86/EFI: further correct FPU state handling around runtime calls We must not leave a vCPU with CR0.TS clear when it is not in fully eager mode and has not touched non-lazy state. Instead of adding a 3rd invocation of stts() to vcpu_restore_fpu_eager(), consolidate all of them into a single one done at the end of the function. Rename the function at the same time to better reflect its purpose, as the patches touches all of its occurences anyway. The new function parameter is not really well named, but "need_stts_if_not_fully_eager" seemed excessive to me. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Paul Durrant <paul.durrant@xxxxxxxxxx> Release-acked-by: Juergen Gross <jgross@xxxxxxxx> master commit: 23839a0fa0bbe78c174cd2bb49083e153f0f99df master date: 2018-06-26 15:23:08 +0200 commit 1c88cadbe57b5c3a5bfb35507fea1ba6eafee219 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Tue Jun 26 08:54:14 2018 +0200 x86/HVM: attempts to emulate FPU insns need to set fpu_initialised My original way of thinking here was that this would be set anyway at the point state gets reloaded after the adjustments hvmemul_put_fpu() does, but the flag should already be set before that - after all the guest may never again touch the FPU before e.g. getting migrated/saved. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Acked-by: Paul Durrant <paul.durrant@xxxxxxxxxx> Release-acked-by: Juergen Gross <jgross@xxxxxxxx> master commit: 3310e3cd648f3713c824790bd71d8ec405a09d05 master date: 2018-06-26 08:41:08 +0200 commit 688e0c364efa93f5882e2788134b693d0f65254b Author: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Date: Mon Jun 25 15:40:02 2018 +0100 MAINTAINERS: Update info for stable branch Signed-off-by: Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx> commit 29debe052660b1938a054fe88a2ffc2784176143 Author: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Date: Mon Jun 25 15:23:09 2018 +0100 Branching for 4.11 stable branch, turn off debug Acked-by: Juergen Gross <jgross@xxxxxxxx> Signed-off-by: Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx> (qemu changes not included) _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |