[Xen-devel] [PATCH 08/16] SUPPORT.md: Add x86-specific virtual hardware

[George Dunlap <george.dunlap@xxxxxxxxxx>]

x86-specific virtual hardware provided by the hypervisor, toolstack,
or QEMU.

Signed-off-by: George Dunlap <george.dunlap@xxxxxxxxxx>
---
Added emulated QEMU support, to replace docs/misc/qemu-xen-security.

Need to figure out what to do with the "backing storage image format"
section of that document.

CC: Ian Jackson <ian.jackson@xxxxxxxxxx>
CC: Wei Liu <wei.liu2@xxxxxxxxxx>
CC: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
CC: Jan Beulich <jbeulich@xxxxxxxx>
CC: Stefano Stabellini <sstabellini@xxxxxxxxxx>
CC: Konrad Wilk <konrad.wilk@xxxxxxxxxx>
CC: Tim Deegan <tim@xxxxxxx>
CC: Roger Pau Monne <roger.pau@xxxxxxxxxx>
CC: Anthony Perard <anthony.perard@xxxxxxxxxx>
CC: Paul Durrant <paul.durrant@xxxxxxxxxx>
---
 SUPPORT.md | 106 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 106 insertions(+)

diff --git a/SUPPORT.md b/SUPPORT.md
index 20c58377a5..b95ee0ebe7 100644
--- a/SUPPORT.md
+++ b/SUPPORT.md
@@ -376,6 +376,112 @@ there is currently no xl support.
 
     Status: Supported
 
+## Virtual Hardware, Hypervisor
+
+### x86/Nested PV
+
+    Status, x86 HVM: Tech Preview
+
+This means running a Xen hypervisor inside an HVM domain,
+with support for PV L2 guests only
+(i.e., hardware virtualization extensions not provided
+to the guest).
+
+This works, but has performance limitations
+because the L1 dom0 can only access emulated L1 devices.
+
+### x86/Nested HVM
+
+    Status, x86 HVM: Experimental
+
+This means running a Xen hypervisor inside an HVM domain,
+with support for running both PV and HVM L2 guests
+(i.e., hardware virtualization extensions provided
+to the guest).
+
+### x86/Advanced Vector eXtension
+
+    Status: Supported
+
+### vPMU
+
+    Status, x86: Supported, Not security supported
+
+Virtual Performance Management Unit for HVM guests
+
+Disabled by default (enable with hypervisor command line option).
+This feature is not security supported: see 
http://xenbits.xen.org/xsa/advisory-163.html
+
+## Virtual Hardware, QEMU
+
+These are devices available in HVM mode using a qemu devicemodel (the default).
+Note that other devices are available but not security supported.
+
+### x86/Emulated platform devices (QEMU):
+
+    Status, piix3: Supported
+
+### x86/Emulated network (QEMU):
+
+    Status, e1000: Supported
+    Status, rtl8193: Supported
+    Status, virtio-net: Supported
+
+### x86/Emulated storage (QEMU):
+
+    Status, piix3 ide: Supported
+    Status, ahci: Supported
+
+### x86/Emulated graphics (QEMU):
+
+    Status, cirrus-vga: Supported
+    Status, stgvga: Supported
+
+### x86/Emulated audio (QEMU):
+
+    Status, sb16: Supported
+    Status, es1370: Supported
+    Status, ac97: Supported
+
+### x86/Emulated input (QEMU):
+
+    Status, usbmouse: Supported
+    Status, usbtablet: Supported
+    Status, ps/2 keyboard: Supported
+    Status, ps/2 mouse: Supported
+    
+### x86/Emulated serial card (QEMU):
+
+    Status, UART 16550A: Supported
+
+### x86/Host USB passthrough (QEMU):
+
+    Status: Supported, not security supported 
+
+## Virtual Firmware
+
+### x86/HVM iPXE
+
+    Status: Supported, with caveats
+
+Booting a guest via PXE.
+PXE inherently places full trust of the guest in the network,
+and so should only be used
+when the guest network is under the same administrative control
+as the guest itself.
+
+### x86/HVM BIOS
+
+    Status: Supported
+
+Booting a guest via guest BIOS firmware
+
+### x86/HVM EFI
+
+    Status: Supported
+
+Booting a guest via guest EFI firmware
+
 # Format and definitions
 
 This file contains prose, and machine-readable fragments.
-- 
2.15.0


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel