|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v1 01/27] x86/crypto: Adapt assembly for PIE support
* Thomas Garnier <thgarnie@xxxxxxxxxx> wrote:
> Change the assembly code to use only relative references of symbols for the
> kernel to be PIE compatible.
>
> Position Independent Executable (PIE) support will allow to extended the
> KASLR randomization range below the -2G memory limit.
> diff --git a/arch/x86/crypto/aes-x86_64-asm_64.S
> b/arch/x86/crypto/aes-x86_64-asm_64.S
> index 8739cf7795de..86fa068e5e81 100644
> --- a/arch/x86/crypto/aes-x86_64-asm_64.S
> +++ b/arch/x86/crypto/aes-x86_64-asm_64.S
> @@ -48,8 +48,12 @@
> #define R10 %r10
> #define R11 %r11
>
> +/* Hold global for PIE suport */
> +#define RBASE %r12
> +
> #define prologue(FUNC,KEY,B128,B192,r1,r2,r5,r6,r7,r8,r9,r10,r11) \
> ENTRY(FUNC); \
> + pushq RBASE; \
> movq r1,r2; \
> leaq KEY+48(r8),r9; \
> movq r10,r11; \
> @@ -74,54 +78,63 @@
> movl r6 ## E,4(r9); \
> movl r7 ## E,8(r9); \
> movl r8 ## E,12(r9); \
> + popq RBASE; \
> ret; \
> ENDPROC(FUNC);
>
> +#define round_mov(tab_off, reg_i, reg_o) \
> + leaq tab_off(%rip), RBASE; \
> + movl (RBASE,reg_i,4), reg_o;
> +
> +#define round_xor(tab_off, reg_i, reg_o) \
> + leaq tab_off(%rip), RBASE; \
> + xorl (RBASE,reg_i,4), reg_o;
> +
> #define round(TAB,OFFSET,r1,r2,r3,r4,r5,r6,r7,r8,ra,rb,rc,rd) \
> movzbl r2 ## H,r5 ## E; \
> movzbl r2 ## L,r6 ## E; \
> - movl TAB+1024(,r5,4),r5 ## E;\
> + round_mov(TAB+1024, r5, r5 ## E)\
> movw r4 ## X,r2 ## X; \
> - movl TAB(,r6,4),r6 ## E; \
> + round_mov(TAB, r6, r6 ## E) \
> roll $16,r2 ## E; \
> shrl $16,r4 ## E; \
> movzbl r4 ## L,r7 ## E; \
> movzbl r4 ## H,r4 ## E; \
> xorl OFFSET(r8),ra ## E; \
> xorl OFFSET+4(r8),rb ## E; \
> - xorl TAB+3072(,r4,4),r5 ## E;\
> - xorl TAB+2048(,r7,4),r6 ## E;\
> + round_xor(TAB+3072, r4, r5 ## E)\
> + round_xor(TAB+2048, r7, r6 ## E)\
> movzbl r1 ## L,r7 ## E; \
> movzbl r1 ## H,r4 ## E; \
> - movl TAB+1024(,r4,4),r4 ## E;\
> + round_mov(TAB+1024, r4, r4 ## E)\
> movw r3 ## X,r1 ## X; \
> roll $16,r1 ## E; \
> shrl $16,r3 ## E; \
> - xorl TAB(,r7,4),r5 ## E; \
> + round_xor(TAB, r7, r5 ## E) \
> movzbl r3 ## L,r7 ## E; \
> movzbl r3 ## H,r3 ## E; \
> - xorl TAB+3072(,r3,4),r4 ## E;\
> - xorl TAB+2048(,r7,4),r5 ## E;\
> + round_xor(TAB+3072, r3, r4 ## E)\
> + round_xor(TAB+2048, r7, r5 ## E)\
> movzbl r1 ## L,r7 ## E; \
> movzbl r1 ## H,r3 ## E; \
> shrl $16,r1 ## E; \
> - xorl TAB+3072(,r3,4),r6 ## E;\
> - movl TAB+2048(,r7,4),r3 ## E;\
> + round_xor(TAB+3072, r3, r6 ## E)\
> + round_mov(TAB+2048, r7, r3 ## E)\
> movzbl r1 ## L,r7 ## E; \
> movzbl r1 ## H,r1 ## E; \
> - xorl TAB+1024(,r1,4),r6 ## E;\
> - xorl TAB(,r7,4),r3 ## E; \
> + round_xor(TAB+1024, r1, r6 ## E)\
> + round_xor(TAB, r7, r3 ## E) \
> movzbl r2 ## H,r1 ## E; \
> movzbl r2 ## L,r7 ## E; \
> shrl $16,r2 ## E; \
> - xorl TAB+3072(,r1,4),r3 ## E;\
> - xorl TAB+2048(,r7,4),r4 ## E;\
> + round_xor(TAB+3072, r1, r3 ## E)\
> + round_xor(TAB+2048, r7, r4 ## E)\
> movzbl r2 ## H,r1 ## E; \
> movzbl r2 ## L,r2 ## E; \
> xorl OFFSET+8(r8),rc ## E; \
> xorl OFFSET+12(r8),rd ## E; \
> - xorl TAB+1024(,r1,4),r3 ## E;\
> - xorl TAB(,r2,4),r4 ## E;
> + round_xor(TAB+1024, r1, r3 ## E)\
> + round_xor(TAB, r2, r4 ## E)
This appears to be adding unconditional overhead to a function that was moved
to
assembly to improve its performance.
Thanks,
Ingo
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |