Re: [Xen-devel] [xen-unstable-smoke test] 114332: regressions - FAIL

[Roger Pau Monné <roger.pau@xxxxxxxxxx>]

Adding Julien and Stefano.

On Wed, Oct 11, 2017 at 07:17:59AM +0000, osstest service owner wrote:
> flight 114332 xen-unstable-smoke real [real]
> http://logs.test-lab.xenproject.org/osstest/logs/114332/
> 
> Regressions :-(
> 
> Tests which did not succeed and are blocking,
> including tests which could not be run:
>  test-armhf-armhf-xl           7 xen-boot                 fail REGR. vs. 
> 114299

Seems like Xen is not able to start on the Exynos or Cubietrucks
anymore:

Oct 11 06:52:11.479093 
U-Boot 2014.10-00007-g0052a7d (Sep 29 2015 - 10:21:38) for ARNDALE
Oct 11 06:52:11.487075 
Oct 11 06:52:11.487090 
CPU:    Exynos5250@1000MHz
Oct 11 06:52:11.487106 
Oct 11 06:52:11.487118 
Board: Arndale
Oct 11 06:52:11.487132 
I2C:   i2c_init: failed to init bus 0 for speed = 100000
Oct 11 06:52:11.495063 
ready
Oct 11 06:52:11.495078 
DRAM:  2 GiB
Oct 11 06:52:11.495092 
trace: copying 000ab188 bytes of early data from 50000000 to beff0000
Oct 11 06:52:11.511080 
trace: enabled
Oct 11 06:52:11.551032 
MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
Oct 11 06:52:11.911146 
i2c_init: failed to init bus 0 for speed = 100000
Oct 11 06:52:11.967154 
In:    serial
Oct 11 06:52:11.967185 
Out:   serial
Oct 11 06:52:11.967211 
Err:   serial
Oct 11 06:52:11.967236 
SCSI:  ARNDALE SCSI INIT
Oct 11 06:52:11.975119 
Target spinup took 0 ms.
Oct 11 06:52:11.983147 
AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
Oct 11 06:52:11.983188 
flags: ncq stag pm led clo only pmp pio slum part ccc apst 
Oct 11 06:52:11.991155 
Net:   Net Initialization Skipped
Oct 11 06:52:11.991189 
No ethernet found.
Oct 11 06:52:11.991216 
Hostname: arndale-westfield
Oct 11 06:52:11.999141 
Hit any key to stop autoboot:  2  1  0 
Oct 11 06:52:13.919168 
(Re)start USB...
Oct 11 06:52:13.919223 
USB0:   USB EHCI 1.00
Oct 11 06:52:13.927090 
scanning bus 0 for devices... 4 USB Device(s) found
Oct 11 06:52:19.523158 
       scanning usb for storage devices... 0 Storage Device(s) found
Oct 11 06:52:19.531073 
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
Oct 11 06:52:19.971149 
Waiting for Ethernet connection... done.
Oct 11 06:52:21.571140 
BOOTP broadcast 1
Oct 11 06:52:21.571189 
BOOTP broadcast 2
Oct 11 06:52:22.619159 
DHCP client bound to address 172.16.144.45 (1092 ms)
Oct 11 06:52:22.627153 
Using asx0 device
Oct 11 06:52:22.627188 
TFTP from server 172.16.144.3; our IP address is 172.16.144.45
Oct 11 06:52:22.635136 
Filename 'pxelinux.0'.
Oct 11 06:52:22.635157 
Load address: 0x43e00000
Oct 11 06:52:22.635173 
Loading: *##
Oct 11 06:52:22.651084 
         1.8 MiB/s
Oct 11 06:52:22.651119 
done
Oct 11 06:52:22.651144 
Bytes transferred = 26474 (676a hex)
Oct 11 06:52:22.651177 
missing environment variable: pxeuuid
Oct 11 06:52:22.659068 
Retrieving file: pxelinux.cfg/AC10902D
Oct 11 06:52:22.659103 
Using asx0 device
Oct 11 06:52:22.659161 
TFTP from server 172.16.144.3; our IP address is 172.16.144.45
Oct 11 06:52:22.667076 
Filename 'pxelinux.cfg/AC10902D'.
Oct 11 06:52:22.675051 
Load address: 0x51000000
Oct 11 06:52:22.675082 
Loading: *#
Oct 11 06:52:22.675106 
         15.6 KiB/s
Oct 11 06:52:22.675131 
done
Oct 11 06:52:22.675153 
Bytes transferred = 65 (41 hex)
Oct 11 06:52:22.683067 
Config file found
Oct 11 06:52:22.683096 
Ignoring unknown command: serial
Oct 11 06:52:22.683124 
1:      local
Oct 11 06:52:22.691033 
scanning bus for devices...
Oct 11 06:52:22.691064 
  Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O
Oct 11 06:52:22.715075 
            Type: Hard Disk
Oct 11 06:52:22.723062 
            Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)
Oct 11 06:52:22.723100 
Found 1 device(s).
Oct 11 06:52:22.723126 
Oct 11 06:52:22.723147 
SCSI device 0: 
Oct 11 06:52:22.731046 
    Device 0: (0:0) Vendor: ATA Prod.: HGST HTS545050A7 Rev: GG2O
Oct 11 06:52:22.731093 
            Type: Hard Disk
Oct 11 06:52:22.739063 
            Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)
Oct 11 06:52:22.739100 
... is now current device
Oct 11 06:52:22.747037 
Scanning scsi 0...
Oct 11 06:52:22.747066 
Found U-Boot script /boot.scr
Oct 11 06:52:22.907117 
1710 bytes read in 34 ms (48.8 KiB/s)
Oct 11 06:52:22.947138 
## Executing script at 50000000
Oct 11 06:52:22.955124 
Loading dtbs/4.9.20+/exynos5250-arndale.dtb
Oct 11 06:52:22.955175 
43128 bytes read in 1186 ms (35.2 KiB/s)
Oct 11 06:52:24.115168 
917512 bytes read in 111 ms (7.9 MiB/s)
Oct 11 06:52:24.251222 
Loaded xen-4.10-unstable to 0x41000000 (e0008)
Oct 11 06:52:24.259243 
command line: conswitch=x watchdog noreboot console=dtuart dtuart=serial2 
dom0_mem=512M,max:512M
Oct 11 06:52:24.267256 
6798760 bytes read in 305 ms (21.3 MiB/s)
Oct 11 06:52:24.587101 
Loaded vmlinuz-4.9.20+ to 0x42000000 (67bda8)
Oct 11 06:52:24.595066 
command line: ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 ro 
root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 console=hvc0 
clk_ignore_unused clk_ignore_unused
Oct 11 06:52:24.611018 
12732874 bytes read in 655 ms (18.5 MiB/s)
Oct 11 06:52:25.251184 
Loaded initrd.img-4.9.20+ to 0x43300000 (c249ca)
Oct 11 06:52:25.259100 
chosen {
Oct 11 06:52:25.259133 
        #size-cells = <0x00000001>;
Oct 11 06:52:25.267097 
        #address-cells = <0x00000001>;
Oct 11 06:52:25.267130 
        bootargs = "conswitch=x watchdog noreboot console=dtuart dtuart=serial2 
dom0_mem=512M,max:512M";
Oct 11 06:52:25.275189 
        module@1 {
Oct 11 06:52:25.275228 
                reg = <0x43300000 0x00c249ca>;
Oct 11 06:52:25.283076 
                compatible = "xen,linux-initrd", "xen,multiboot-module";
Oct 11 06:52:25.283116 
        };
Oct 11 06:52:25.283138 
        module@0 {
Oct 11 06:52:25.283162 
                bootargs = "ro root=/dev/mapper/arndale--westfield--vg-root 
rootdelay=3 ro root=/dev/mapper/arndale--westfield--vg-root rootdelay=3 
console=hvc0 clk_ignore_unused clk_ignore_unused";
Oct 11 06:52:25.299122 
                reg = <0x42000000 0x0067bda8>;
Oct 11 06:52:25.307107 
                compatible = "xen,linux-zimage", "xen,multiboot-module";
Oct 11 06:52:25.307133 
        };
Oct 11 06:52:25.315083 
};
Oct 11 06:52:25.315100 
Booting 0x41000000 - 0x43000000
Oct 11 06:52:25.315116 
Kernel image @ 0x41000000 [ 0x000000 - 0x125780 ]
Oct 11 06:52:25.315133 
## Flattened Device Tree blob at 43000000
Oct 11 06:52:25.323090 
   Booting using the fdt blob at 0x43000000
Oct 11 06:52:25.323110 
   reserving fdt memory region: addr=43000000 size=b000
Oct 11 06:52:25.331095 
   Loading Device Tree to 4fff2000, end 4fffffff ... OK
Oct 11 06:52:25.339059 
Oct 11 06:52:25.339075 
Starting kernel ...(fake run for tracing)
Oct 11 06:52:25.347045 
Oct 11 06:52:25.347060 
Oct 11 06:52:25.347072 
Starting kernel ...

The trace from the Cubietruck looks the same.

Roger.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel