[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v5 12/12] libxl: remove unneeded DEVICE_ADD macro



From: Oleksandr Grytsov <oleksandr_grytsov@xxxxxxxx>

Signed-off-by: Oleksandr Grytsov <oleksandr_grytsov@xxxxxxxx>
Acked-by: Wei Liu <wei.liu2@xxxxxxxxxx>
---
 tools/libxl/libxl_device.c   |  6 ++---
 tools/libxl/libxl_disk.c     |  5 +++--
 tools/libxl/libxl_internal.h | 52 +++-----------------------------------------
 tools/libxl/libxl_pci.c      |  3 ++-
 tools/libxl/libxl_usb.c      |  8 +++----
 5 files changed, 14 insertions(+), 60 deletions(-)

diff --git a/tools/libxl/libxl_device.c b/tools/libxl/libxl_device.c
index 487be28..67b7afb 100644
--- a/tools/libxl/libxl_device.c
+++ b/tools/libxl/libxl_device.c
@@ -1793,10 +1793,8 @@ out:
     return AO_CREATE_FAIL(rc);
 }
 
-static void device_add_domain_config(libxl__gc *gc,
-                                     libxl_domain_config *d_config,
-                                     const struct libxl_device_type *dt,
-                                     void *type)
+void device_add_domain_config(libxl__gc *gc, libxl_domain_config *d_config,
+                              const struct libxl_device_type *dt, void *type)
 {
     int *num_dev;
     unsigned int i;
diff --git a/tools/libxl/libxl_disk.c b/tools/libxl/libxl_disk.c
index 0f72874..e36c7bf 100644
--- a/tools/libxl/libxl_disk.c
+++ b/tools/libxl/libxl_disk.c
@@ -277,7 +277,8 @@ static void device_disk_add(libxl__egc *egc, uint32_t domid,
         rc = libxl__get_domain_configuration(gc, domid, &d_config);
         if (rc) goto out;
 
-        DEVICE_ADD(disk, disks, domid, &disk_saved, COMPARE_DISK, &d_config);
+        device_add_domain_config(gc, &d_config, &libxl__disk_devtype,
+                                 &disk_saved);
 
         rc = libxl__dm_check_start(gc, &d_config, domid);
         if (rc) goto out;
@@ -832,7 +833,7 @@ int libxl_cdrom_insert(libxl_ctx *ctx, uint32_t domid, 
libxl_device_disk *disk,
     rc = libxl__get_domain_configuration(gc, domid, &d_config);
     if (rc) goto out;
 
-    DEVICE_ADD(disk, disks, domid, &disk_saved, COMPARE_DISK, &d_config);
+    device_add_domain_config(gc, &d_config, &libxl__disk_devtype, &disk_saved);
 
     rc = libxl__dm_check_start(gc, &d_config, domid);
     if (rc) goto out;
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 976827a..81e87ae 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -4281,55 +4281,6 @@ void libxl__xcinfo2xlinfo(libxl_ctx *ctx,
                            (a)->port == (b)->port)
 #define COMPARE_USBCTRL(a, b) ((a)->devid == (b)->devid)
 
-/* DEVICE_ADD
- *
- * Add a device in libxl_domain_config structure
- *
- * It takes 6 parameters:
- *  type:     the type of the device, say nic, vtpm, disk, pci etc
- *  ptr:      pointer to the start of the array, the array must be
- *            of type libxl_device_#type
- *  domid:    domain id of target domain
- *  dev:      the device that is to be added / removed / updated
- *  compare:  the COMPARE_* macro used to compare @dev's identifier to
- *            those in the array pointed to by @ptr
- *  d_config: pointer to template domain config
- *
- * For most device types (nic, vtpm), the array pointer @ptr can be
- * derived from @type, pci device being the exception, hence we need
- * to have @ptr.
- *
- * If there is already a device with the same identifier in d_config,
- * that entry is updated.
- */
-#define DEVICE_ADD(type, ptr, domid, dev, compare, d_config)    \
-    ({                                                          \
-        int DA_x;                                               \
-        libxl_device_##type *DA_p = NULL;                       \
-                                                                \
-        /* Check for existing device */                         \
-        for (DA_x = 0; DA_x < (d_config)->num_##ptr; DA_x++) {  \
-            if (compare(&(d_config)->ptr[DA_x], (dev))) {       \
-                DA_p = &(d_config)->ptr[DA_x];                  \
-                break;                                          \
-            }                                                   \
-        }                                                       \
-                                                                \
-        if (!DA_p) {                                            \
-            (d_config)->ptr =                                   \
-                libxl__realloc(NOGC, (d_config)->ptr,           \
-                               ((d_config)->num_##ptr + 1) *    \
-                               sizeof(libxl_device_##type));    \
-            DA_p = &(d_config)->ptr[(d_config)->num_##ptr];     \
-            (d_config)->num_##ptr++;                            \
-        } else {                                                \
-            libxl_device_##type##_dispose(DA_p);                \
-        }                                                       \
-                                                                \
-        libxl_device_##type##_init(DA_p);                       \
-        libxl_device_##type##_copy(CTX, DA_p, (dev));           \
-    })
-
 /* This function copies X bytes from source to destination bitmap,
  * where X is the smaller of the two sizes.
  *
@@ -4359,6 +4310,9 @@ static inline bool libxl__acpi_defbool_val(const 
libxl_domain_build_info *b_info
            libxl_defbool_val(b_info->u.hvm.acpi);
 }
 
+void device_add_domain_config(libxl__gc *gc, libxl_domain_config *d_config,
+                              const struct libxl_device_type *dt, void *type);
+
 void libxl__device_add_async(libxl__egc *egc, uint32_t domid,
                              const struct libxl_device_type *dt, void *type,
                              libxl__ao_device *aodev);
diff --git a/tools/libxl/libxl_pci.c b/tools/libxl/libxl_pci.c
index 7a2d42f..f929e5a 100644
--- a/tools/libxl/libxl_pci.c
+++ b/tools/libxl/libxl_pci.c
@@ -160,7 +160,8 @@ static int libxl__device_pci_add_xenstore(libxl__gc *gc, 
uint32_t domid, libxl_d
     rc = libxl__get_domain_configuration(gc, domid, &d_config);
     if (rc) goto out;
 
-    DEVICE_ADD(pci, pcidevs, domid, &pcidev_saved, COMPARE_PCI, &d_config);
+    device_add_domain_config(gc, &d_config, &libxl__pcidev_devtype,
+                             &pcidev_saved);
 
     rc = libxl__dm_check_start(gc, &d_config, domid);
     if (rc) goto out;
diff --git a/tools/libxl/libxl_usb.c b/tools/libxl/libxl_usb.c
index 7f78f4e..1d5a243 100644
--- a/tools/libxl/libxl_usb.c
+++ b/tools/libxl/libxl_usb.c
@@ -246,8 +246,8 @@ static int libxl__device_usbctrl_add_xenstore(libxl__gc 
*gc, uint32_t domid,
         rc = libxl__get_domain_configuration(gc, domid, &d_config);
         if (rc) goto out;
 
-        DEVICE_ADD(usbctrl, usbctrls, domid, &usbctrl_saved,
-                   COMPARE_USBCTRL, &d_config);
+        device_add_domain_config(gc, &d_config, &libxl__usbctrl_devtype,
+                                 &usbctrl_saved);
 
         rc = libxl__dm_check_start(gc, &d_config, domid);
         if (rc) goto out;
@@ -1194,8 +1194,8 @@ static int libxl__device_usbdev_add_xenstore(libxl__gc 
*gc, uint32_t domid,
         rc = libxl__get_domain_configuration(gc, domid, &d_config);
         if (rc) goto out;
 
-        DEVICE_ADD(usbdev, usbdevs, domid, &usbdev_saved,
-                   COMPARE_USB, &d_config);
+        device_add_domain_config(gc, &d_config, &libxl__usbdev_devtype,
+                                         &usbdev_saved);
 
         rc = libxl__dm_check_start(gc, &d_config, domid);
         if (rc) goto out;
-- 
2.7.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.