[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] Unable to boot Dom0 on Hikey


  • To: xen-devel@xxxxxxxxxxxxx
  • From: Saeed Mirzamohammadi <saeed@xxxxxxx>
  • Date: Mon, 28 Aug 2017 18:23:41 -0700
  • Delivery-date: Tue, 29 Aug 2017 06:08:21 +0000
  • List-id: Xen developer discussion <xen-devel.lists.xen.org>

Hi,


I'm trying to boot Xen on Hikey but Dom0 doesn't boot after Xen! I can boot the linux individually with startup.sh. This works fine but when I try to boot xen (typing 4 and then xen), I get a couple of Xen messages and when it tries to boot Dom0 it fails and it stops there.These are the last messages:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Loading kernel from boot module @ 000000007a029000
(XEN) Loading ramdisk from boot module @ 000000000ae00000
(XEN) Allocating 1:1 mappings totalling 512MB for dom0:
(XEN) BANK[0] 0x00000040000000-0x00000060000000 (512MB)
(XEN) Grant table range: 0x00000005c00000-0x00000005c5e000
(XEN) Loading zImage from 000000007a029000 to 0000000040080000-0000000040ce8400
(XEN) Loading dom0 initrd from 000000000ae00000 to 0x0000000048200000-0x0000000048a00000
(XEN) Allocating PPI 16 for event channel interrupt
(XEN) Loading dom0 DTB to 0x0000000048000000-0x000000004800aec1
(XEN) Scrubbing Free RAM on 1 nodes using 8 CPUs
(XEN) ..done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-x' three times to switch input to Xen)
(XEN) Freed 276kB init memory.
(XEN) traps.c:2505:d0v0 HSR=0x92000061 pc=0xffffffc0003f86ac gva=0xffffff800024000c gpa=0x00000021fc000c
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

My Xen version is: 4.7.0.rc4 and my dom0 is: android-hikey-linaro-4.1. I tried earlier Xen version but no difference.

This is my xen.cfg:
options=dom0_mem=512M dom0_max_vcpus=4 conswitch=x console=dtuart
dtuart=/smb/uart@f7113000
kernel=Image console=hvc0 root=/dev/mmcblk0p9 rootwait rw 3
dtb=hi6220-hikey.dtb

and my startup.nsh:
FS0:
Image dtb=hi6220-hikey.dtb console=ttyAMA3,115200 root=/dev/mmcblk0p9 rootwait rw efi=noruntime

I've checked out the thread here or others: https://lists.gt.net/xen/devel/433472 but I have passed the dtb file in the xen.cfg and still Dom0 doesn't boot.

Any help is greatly appreciated. 

Thanks a lot,

--
Saeed Mirzamohammadi
Ph.D. candidate
Computer Science Department
University of California, Irvine

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.