|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH 1/2] xen/arm: Move LPAE definition in a separate header
page.h is getting bigger. Move out every LPAE definitions in a separate
header. There is no functional changes.
Signed-off-by: Julien Grall <julien.grall@xxxxxxx>
---
xen/include/asm-arm/lpae.h | 169 +++++++++++++++++++++++++++++++++++++++++++++
xen/include/asm-arm/page.h | 152 +---------------------------------------
2 files changed, 170 insertions(+), 151 deletions(-)
create mode 100644 xen/include/asm-arm/lpae.h
diff --git a/xen/include/asm-arm/lpae.h b/xen/include/asm-arm/lpae.h
new file mode 100644
index 0000000000..1e6a68926e
--- /dev/null
+++ b/xen/include/asm-arm/lpae.h
@@ -0,0 +1,169 @@
+#ifndef __ARM_LPAE_H__
+#define __ARM_LPAE_H__
+
+#ifndef __ASSEMBLY__
+
+/* WARNING! Unlike the Intel pagetable code, where l1 is the lowest
+ * level and l4 is the root of the trie, the ARM pagetables follow ARM's
+ * documentation: the levels are called first, second &c in the order
+ * that the MMU walks them (i.e. "first" is the root of the trie). */
+
+/******************************************************************************
+ * ARMv7-A LPAE pagetables: 3-level trie, mapping 40-bit input to
+ * 40-bit output addresses. Tables at all levels have 512 64-bit entries
+ * (i.e. are 4Kb long).
+ *
+ * The bit-shuffling that has the permission bits in branch nodes in a
+ * different place from those in leaf nodes seems to be to allow linear
+ * pagetable tricks. If we're not doing that then the set of permission
+ * bits that's not in use in a given node type can be used as
+ * extra software-defined bits. */
+
+typedef struct __packed {
+ /* These are used in all kinds of entry. */
+ unsigned long valid:1; /* Valid mapping */
+ unsigned long table:1; /* == 1 in 4k map entries too */
+
+ /* These ten bits are only used in Block entries and are ignored
+ * in Table entries. */
+ unsigned long ai:3; /* Attribute Index */
+ unsigned long ns:1; /* Not-Secure */
+ unsigned long user:1; /* User-visible */
+ unsigned long ro:1; /* Read-Only */
+ unsigned long sh:2; /* Shareability */
+ unsigned long af:1; /* Access Flag */
+ unsigned long ng:1; /* Not-Global */
+
+ /* The base address must be appropriately aligned for Block entries */
+ unsigned long long base:36; /* Base address of block or next table */
+ unsigned long sbz:4; /* Must be zero */
+
+ /* These seven bits are only used in Block entries and are ignored
+ * in Table entries. */
+ unsigned long contig:1; /* In a block of 16 contiguous entries */
+ unsigned long pxn:1; /* Privileged-XN */
+ unsigned long xn:1; /* eXecute-Never */
+ unsigned long avail:4; /* Ignored by hardware */
+
+ /* These 5 bits are only used in Table entries and are ignored in
+ * Block entries */
+ unsigned long pxnt:1; /* Privileged-XN */
+ unsigned long xnt:1; /* eXecute-Never */
+ unsigned long apt:2; /* Access Permissions */
+ unsigned long nst:1; /* Not-Secure */
+} lpae_pt_t;
+
+/* The p2m tables have almost the same layout, but some of the permission
+ * and cache-control bits are laid out differently (or missing) */
+typedef struct __packed {
+ /* These are used in all kinds of entry. */
+ unsigned long valid:1; /* Valid mapping */
+ unsigned long table:1; /* == 1 in 4k map entries too */
+
+ /* These ten bits are only used in Block entries and are ignored
+ * in Table entries. */
+ unsigned long mattr:4; /* Memory Attributes */
+ unsigned long read:1; /* Read access */
+ unsigned long write:1; /* Write access */
+ unsigned long sh:2; /* Shareability */
+ unsigned long af:1; /* Access Flag */
+ unsigned long sbz4:1;
+
+ /* The base address must be appropriately aligned for Block entries */
+ unsigned long long base:36; /* Base address of block or next table */
+ unsigned long sbz3:4;
+
+ /* These seven bits are only used in Block entries and are ignored
+ * in Table entries. */
+ unsigned long contig:1; /* In a block of 16 contiguous entries */
+ unsigned long sbz2:1;
+ unsigned long xn:1; /* eXecute-Never */
+ unsigned long type:4; /* Ignore by hardware. Used to store p2m types
*/
+
+ unsigned long sbz1:5;
+} lpae_p2m_t;
+
+/* Permission mask: xn, write, read */
+#define P2M_PERM_MASK (0x00400000000000C0ULL)
+#define P2M_CLEAR_PERM(pte) ((pte).bits & ~P2M_PERM_MASK)
+
+/*
+ * Walk is the common bits of p2m and pt entries which are needed to
+ * simply walk the table (e.g. for debug).
+ */
+typedef struct __packed {
+ /* These are used in all kinds of entry. */
+ unsigned long valid:1; /* Valid mapping */
+ unsigned long table:1; /* == 1 in 4k map entries too */
+
+ unsigned long pad2:10;
+
+ /* The base address must be appropriately aligned for Block entries */
+ unsigned long long base:36; /* Base address of block or next table */
+
+ unsigned long pad1:16;
+} lpae_walk_t;
+
+typedef union {
+ uint64_t bits;
+ lpae_pt_t pt;
+ lpae_p2m_t p2m;
+ lpae_walk_t walk;
+} lpae_t;
+
+/*
+ * These numbers add up to a 48-bit input address space.
+ *
+ * On 32-bit the zeroeth level does not exist, therefore the total is
+ * 39-bits. The ARMv7-A architecture actually specifies a 40-bit input
+ * address space for the p2m, with an 8K (1024-entry) top-level table.
+ * However Xen only supports 16GB of RAM on 32-bit ARM systems and
+ * therefore 39-bits are sufficient.
+ */
+
+#endif /* __ASSEMBLY__ */
+
+#define LPAE_SHIFT 9
+#define LPAE_ENTRIES (_AC(1,U) << LPAE_SHIFT)
+#define LPAE_ENTRY_MASK (LPAE_ENTRIES - 1)
+
+#define THIRD_SHIFT (PAGE_SHIFT)
+#define THIRD_ORDER (THIRD_SHIFT - PAGE_SHIFT)
+#define THIRD_SIZE ((paddr_t)1 << THIRD_SHIFT)
+#define THIRD_MASK (~(THIRD_SIZE - 1))
+#define SECOND_SHIFT (THIRD_SHIFT + LPAE_SHIFT)
+#define SECOND_ORDER (SECOND_SHIFT - PAGE_SHIFT)
+#define SECOND_SIZE ((paddr_t)1 << SECOND_SHIFT)
+#define SECOND_MASK (~(SECOND_SIZE - 1))
+#define FIRST_SHIFT (SECOND_SHIFT + LPAE_SHIFT)
+#define FIRST_ORDER (FIRST_SHIFT - PAGE_SHIFT)
+#define FIRST_SIZE ((paddr_t)1 << FIRST_SHIFT)
+#define FIRST_MASK (~(FIRST_SIZE - 1))
+#define ZEROETH_SHIFT (FIRST_SHIFT + LPAE_SHIFT)
+#define ZEROETH_ORDER (ZEROETH_SHIFT - PAGE_SHIFT)
+#define ZEROETH_SIZE ((paddr_t)1 << ZEROETH_SHIFT)
+#define ZEROETH_MASK (~(ZEROETH_SIZE - 1))
+
+/* Calculate the offsets into the pagetables for a given VA */
+#define zeroeth_linear_offset(va) ((va) >> ZEROETH_SHIFT)
+#define first_linear_offset(va) ((va) >> FIRST_SHIFT)
+#define second_linear_offset(va) ((va) >> SECOND_SHIFT)
+#define third_linear_offset(va) ((va) >> THIRD_SHIFT)
+
+#define TABLE_OFFSET(offs) ((unsigned int)(offs) & LPAE_ENTRY_MASK)
+#define first_table_offset(va) TABLE_OFFSET(first_linear_offset(va))
+#define second_table_offset(va) TABLE_OFFSET(second_linear_offset(va))
+#define third_table_offset(va) TABLE_OFFSET(third_linear_offset(va))
+#define zeroeth_table_offset(va) TABLE_OFFSET(zeroeth_linear_offset(va))
+
+#endif /* __ARM_LPAE_H__ */
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/xen/include/asm-arm/page.h b/xen/include/asm-arm/page.h
index 6203452387..201da8309a 100644
--- a/xen/include/asm-arm/page.h
+++ b/xen/include/asm-arm/page.h
@@ -3,6 +3,7 @@
#include <public/xen.h>
#include <asm/processor.h>
+#include <asm/lpae.h>
#ifdef CONFIG_ARM_64
#define PADDR_BITS 48
@@ -101,114 +102,6 @@
#include <xen/lib.h>
#include <asm/system.h>
-/* WARNING! Unlike the Intel pagetable code, where l1 is the lowest
- * level and l4 is the root of the trie, the ARM pagetables follow ARM's
- * documentation: the levels are called first, second &c in the order
- * that the MMU walks them (i.e. "first" is the root of the trie). */
-
-/******************************************************************************
- * ARMv7-A LPAE pagetables: 3-level trie, mapping 40-bit input to
- * 40-bit output addresses. Tables at all levels have 512 64-bit entries
- * (i.e. are 4Kb long).
- *
- * The bit-shuffling that has the permission bits in branch nodes in a
- * different place from those in leaf nodes seems to be to allow linear
- * pagetable tricks. If we're not doing that then the set of permission
- * bits that's not in use in a given node type can be used as
- * extra software-defined bits. */
-
-typedef struct __packed {
- /* These are used in all kinds of entry. */
- unsigned long valid:1; /* Valid mapping */
- unsigned long table:1; /* == 1 in 4k map entries too */
-
- /* These ten bits are only used in Block entries and are ignored
- * in Table entries. */
- unsigned long ai:3; /* Attribute Index */
- unsigned long ns:1; /* Not-Secure */
- unsigned long user:1; /* User-visible */
- unsigned long ro:1; /* Read-Only */
- unsigned long sh:2; /* Shareability */
- unsigned long af:1; /* Access Flag */
- unsigned long ng:1; /* Not-Global */
-
- /* The base address must be appropriately aligned for Block entries */
- unsigned long long base:36; /* Base address of block or next table */
- unsigned long sbz:4; /* Must be zero */
-
- /* These seven bits are only used in Block entries and are ignored
- * in Table entries. */
- unsigned long contig:1; /* In a block of 16 contiguous entries */
- unsigned long pxn:1; /* Privileged-XN */
- unsigned long xn:1; /* eXecute-Never */
- unsigned long avail:4; /* Ignored by hardware */
-
- /* These 5 bits are only used in Table entries and are ignored in
- * Block entries */
- unsigned long pxnt:1; /* Privileged-XN */
- unsigned long xnt:1; /* eXecute-Never */
- unsigned long apt:2; /* Access Permissions */
- unsigned long nst:1; /* Not-Secure */
-} lpae_pt_t;
-
-/* The p2m tables have almost the same layout, but some of the permission
- * and cache-control bits are laid out differently (or missing) */
-typedef struct __packed {
- /* These are used in all kinds of entry. */
- unsigned long valid:1; /* Valid mapping */
- unsigned long table:1; /* == 1 in 4k map entries too */
-
- /* These ten bits are only used in Block entries and are ignored
- * in Table entries. */
- unsigned long mattr:4; /* Memory Attributes */
- unsigned long read:1; /* Read access */
- unsigned long write:1; /* Write access */
- unsigned long sh:2; /* Shareability */
- unsigned long af:1; /* Access Flag */
- unsigned long sbz4:1;
-
- /* The base address must be appropriately aligned for Block entries */
- unsigned long long base:36; /* Base address of block or next table */
- unsigned long sbz3:4;
-
- /* These seven bits are only used in Block entries and are ignored
- * in Table entries. */
- unsigned long contig:1; /* In a block of 16 contiguous entries */
- unsigned long sbz2:1;
- unsigned long xn:1; /* eXecute-Never */
- unsigned long type:4; /* Ignore by hardware. Used to store p2m types
*/
-
- unsigned long sbz1:5;
-} lpae_p2m_t;
-
-/* Permission mask: xn, write, read */
-#define P2M_PERM_MASK (0x00400000000000C0ULL)
-#define P2M_CLEAR_PERM(pte) ((pte).bits & ~P2M_PERM_MASK)
-
-/*
- * Walk is the common bits of p2m and pt entries which are needed to
- * simply walk the table (e.g. for debug).
- */
-typedef struct __packed {
- /* These are used in all kinds of entry. */
- unsigned long valid:1; /* Valid mapping */
- unsigned long table:1; /* == 1 in 4k map entries too */
-
- unsigned long pad2:10;
-
- /* The base address must be appropriately aligned for Block entries */
- unsigned long long base:36; /* Base address of block or next table */
-
- unsigned long pad1:16;
-} lpae_walk_t;
-
-typedef union {
- uint64_t bits;
- lpae_pt_t pt;
- lpae_p2m_t p2m;
- lpae_walk_t walk;
-} lpae_t;
-
#if defined(CONFIG_ARM_32)
# include <asm/arm32/page.h>
#elif defined(CONFIG_ARM_64)
@@ -394,49 +287,6 @@ static inline int gva_to_ipa(vaddr_t va, paddr_t *paddr,
unsigned int flags)
#endif /* __ASSEMBLY__ */
-/*
- * These numbers add up to a 48-bit input address space.
- *
- * On 32-bit the zeroeth level does not exist, therefore the total is
- * 39-bits. The ARMv7-A architecture actually specifies a 40-bit input
- * address space for the p2m, with an 8K (1024-entry) top-level table.
- * However Xen only supports 16GB of RAM on 32-bit ARM systems and
- * therefore 39-bits are sufficient.
- */
-
-#define LPAE_SHIFT 9
-#define LPAE_ENTRIES (_AC(1,U) << LPAE_SHIFT)
-#define LPAE_ENTRY_MASK (LPAE_ENTRIES - 1)
-
-#define THIRD_SHIFT (PAGE_SHIFT)
-#define THIRD_ORDER (THIRD_SHIFT - PAGE_SHIFT)
-#define THIRD_SIZE ((paddr_t)1 << THIRD_SHIFT)
-#define THIRD_MASK (~(THIRD_SIZE - 1))
-#define SECOND_SHIFT (THIRD_SHIFT + LPAE_SHIFT)
-#define SECOND_ORDER (SECOND_SHIFT - PAGE_SHIFT)
-#define SECOND_SIZE ((paddr_t)1 << SECOND_SHIFT)
-#define SECOND_MASK (~(SECOND_SIZE - 1))
-#define FIRST_SHIFT (SECOND_SHIFT + LPAE_SHIFT)
-#define FIRST_ORDER (FIRST_SHIFT - PAGE_SHIFT)
-#define FIRST_SIZE ((paddr_t)1 << FIRST_SHIFT)
-#define FIRST_MASK (~(FIRST_SIZE - 1))
-#define ZEROETH_SHIFT (FIRST_SHIFT + LPAE_SHIFT)
-#define ZEROETH_ORDER (ZEROETH_SHIFT - PAGE_SHIFT)
-#define ZEROETH_SIZE ((paddr_t)1 << ZEROETH_SHIFT)
-#define ZEROETH_MASK (~(ZEROETH_SIZE - 1))
-
-/* Calculate the offsets into the pagetables for a given VA */
-#define zeroeth_linear_offset(va) ((va) >> ZEROETH_SHIFT)
-#define first_linear_offset(va) ((va) >> FIRST_SHIFT)
-#define second_linear_offset(va) ((va) >> SECOND_SHIFT)
-#define third_linear_offset(va) ((va) >> THIRD_SHIFT)
-
-#define TABLE_OFFSET(offs) ((unsigned int)(offs) & LPAE_ENTRY_MASK)
-#define first_table_offset(va) TABLE_OFFSET(first_linear_offset(va))
-#define second_table_offset(va) TABLE_OFFSET(second_linear_offset(va))
-#define third_table_offset(va) TABLE_OFFSET(third_linear_offset(va))
-#define zeroeth_table_offset(va) TABLE_OFFSET(zeroeth_linear_offset(va))
-
#define PAGE_ALIGN(x) (((x) + PAGE_SIZE - 1) & PAGE_MASK)
#endif /* __ARM_PAGE_H__ */
--
2.11.0
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |