|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v12 01/23] docs: create Cache Allocation Technology (CAT) and Code and Data Prioritization (CDP) feature document
This patch creates CAT and CDP feature document in doc/features/. It describes
key points to implement L3 CAT/CDP and L2 CAT which is described in details in
Intel SDM "INTEL® RESOURCE DIRECTOR TECHNOLOGY (INTEL® RDT) ALLOCATION
FEATURES".
Signed-off-by: Yi Sun <yi.y.sun@xxxxxxxxxxxxxxx>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
Reviewed-by: Wei Liu <wei.liu2@xxxxxxxxxx>
---
v11:
- modify data structure descriptions according to code changes.
- modify revision.
v9:
- add 'CMT' to the list of acronyms.
(suggested by Wei Liu)
- change feature list to feature array.
- modify data structure descriptions according to latest codes.
- modify revision.
v8:
- change revision info.
(suggested by Konrad Rzeszutek Wilk)
- add content int 'Areas for improvement'.
(suggested by Konrad Rzeszutek Wilk)
v7:
- correct typo.
(suggested by Konrad Rzeszutek Wilk)
- replace application/VM to domain.
(suggested by Konrad Rzeszutek Wilk)
- amend description of `feat_mask` to make it clearer.
(suggested by Konrad Rzeszutek Wilk)
- update revision.
(suggested by Konrad Rzeszutek Wilk)
- other minor fixes.
(suggested by Konrad Rzeszutek Wilk)
v6:
- write a new feature document to cover L3 CAT/CDP and L2 CAT.
(suggested by Kevin Tian)
- adjust 'Terminology' position in document.
(suggested by Dario Faggioli)
- fix wordings.
(suggested by Dario Faggioli, Kevin Tian and Konrad Rzeszutek Wilk)
- add SDM chapter title in commit message.
(suggested by Konrad Rzeszutek Wilk)
- add more explanations.
(suggested by Kevin Tian)
v4:
- change file name to be more descriptive, 'intel_psr_l2_cat.pandoc'.
(suggested by Dario Faggioli)
- remove 'Ext' and 'New' prefixes.
(suggested by Dario Faggioli)
- remove change log in Revison part.
(suggested by Dario Faggioli)
- adjust Xen release number to 4.9 to show this feature targets 4.9.
(suggested by Dario Faggioli)
- provide 'Terminology' and more sections.
(suggested by Dario Faggioli)
- fix wordings.
(suggested by Konrad Rzeszutek Wilk)
- remove chapter number.
(suggested by Konrad Rzeszutek Wilk)
v3:
- make design document be a patch.
(suggested by Konrad Rzeszutek Wilk)
v2:
- provide chapter for the L2 CAT.
(suggested by Meng Xu)
---
---
docs/features/intel_psr_cat_cdp.pandoc | 461 +++++++++++++++++++++++++++++++++
1 file changed, 461 insertions(+)
create mode 100644 docs/features/intel_psr_cat_cdp.pandoc
diff --git a/docs/features/intel_psr_cat_cdp.pandoc
b/docs/features/intel_psr_cat_cdp.pandoc
new file mode 100644
index 0000000..79b4739
--- /dev/null
+++ b/docs/features/intel_psr_cat_cdp.pandoc
@@ -0,0 +1,461 @@
+% Intel Cache Allocation Technology and Code and Data Prioritization Features
+% Revision 1.11
+
+\clearpage
+
+# Basics
+
+---------------- ----------------------------------------------------
+ Status: **Tech Preview**
+
+Architecture(s): Intel x86
+
+ Component(s): Hypervisor, toolstack
+
+ Hardware: L3 CAT: Haswell and beyond CPUs
+ CDP : Broadwell and beyond CPUs
+ L2 CAT: Atom codename Goldmont and beyond CPUs
+---------------- ----------------------------------------------------
+
+# Terminology
+
+* CAT Cache Allocation Technology
+* CBM Capacity BitMasks
+* CDP Code and Data Prioritization
+* CMT Cache Monitoring Technology
+* COS/CLOS Class of Service
+* MSRs Machine Specific Registers
+* PSR Intel Platform Shared Resource
+
+# Overview
+
+Intel provides a set of allocation capabilities including Cache Allocatation
+Technology (CAT) and Code and Data Prioritization (CDP).
+
+CAT allows an OS or hypervisor to control allocation of a CPU's shared cache
+based on application/domain priority or Class of Service (COS). Each COS is
+configured using capacity bitmasks (CBMs) which represent cache capacity and
+indicate the degree of overlap and isolation between classes. Once CAT is co-
+nfigured, the processor allows access to portions of cache according to the
+established COS. Intel Xeon processor E5 v4 family (and some others) introduce
+capabilities to configure and make use of the CAT mechanism on the L3 cache.
+Intel Goldmont processor provides support for control over the L2 cache.
+
+Code and Data Prioritization (CDP) Technology is an extension of CAT. CDP
+enables isolation and separate prioritization of code and data fetches to
+the L3 cache in a SW configurable manner, which can enable workload priorit-
+ization and tuning of cache capacity to the characteristics of the workload.
+CDP extends CAT by providing separate code and data masks per Class of Service
+(COS). When SW configures to enable CDP, L3 CAT is disabled.
+
+# User details
+
+* Feature Enabling:
+
+ Add "psr=cat" to boot line parameter to enable all supported level CAT featu-
+ res. Add "psr=cdp" to enable L3 CDP but disables L3 CAT by SW.
+
+* xl interfaces:
+
+ 1. `psr-cat-show [OPTIONS] domain-id`:
+
+ Show L2 CAT or L3 CAT/CDP CBM of the domain designated by Xen domain-id.
+
+ Option `-l`:
+ `-l2`: Show cbm for L2 cache.
+ `-l3`: Show cbm for L3 cache.
+
+ If `-lX` is specified and LX is not supported, print error.
+ If no `-l` is specified, level 3 is the default option.
+
+ 2. `psr-cat-set [OPTIONS] domain-id cbm`:
+
+ Set L2 CAT or L3 CAT/CDP CBM to the domain designated by Xen domain-id.
+
+ Option `-s`: Specify the socket to process, otherwise all sockets are
+ processed.
+
+ Option `-l`:
+ `-l2`: Specify cbm for L2 cache.
+ `-l3`: Specify cbm for L3 cache.
+
+ If `-lX` is specified and LX is not supported, print error.
+ If no `-l` is specified, level 3 is the default option.
+
+ Option `-c` or `-d`:
+ `-c`: Set L3 CDP code cbm.
+ `-d`: Set L3 CDP data cbm.
+
+ 3. `psr-hwinfo [OPTIONS]`:
+
+ Show CMT & L2 CAT & L3 CAT/CDP HW information on every socket.
+
+ Option `-m, --cmt`: Show Cache Monitoring Technology (CMT) hardware info.
+
+ Option `-a, --cat`: Show CAT/CDP hardware info.
+
+# Technical details
+
+L3 CAT/CDP and L2 CAT are all members of Intel PSR features, they share the
base
+PSR infrastructure in Xen.
+
+## Hardware perspective
+
+ CAT/CDP defines a range of MSRs to assign different cache access patterns
+ which are known as CBMs, each CBM is associated with a COS.
+
+ ```
+ E.g. L2 CAT:
+ +----------------------------+----------------+
+ IA32_PQR_ASSOC | MSR (per socket) | Address |
+ +----+---+-------+ +----------------------------+----------------+
+ | |COS| | | IA32_L2_QOS_MASK_0 | 0xD10 |
+ +----+---+-------+ +----------------------------+----------------+
+ └-------------> | ... | ... |
+ +----------------------------+----------------+
+ | IA32_L2_QOS_MASK_n | 0xD10+n (n<64) |
+ +----------------------------+----------------+
+ ```
+
+ L3 CAT/CDP uses a range of MSRs from 0xC90 ~ 0xC90+n (n<128).
+
+ L2 CAT uses a range of MSRs from 0xD10 ~ 0xD10+n (n<64), following the L3
+ CAT/CDP MSRs, setting different L2 cache accessing patterns from L3 cache is
+ supported.
+
+ Every MSR stores a CBM value. A capacity bitmask (CBM) provides a hint to the
+ hardware indicating the cache space a domain should be limited to as well as
+ providing an indication of overlap and isolation in the CAT-capable cache
from
+ other domains contending for the cache.
+
+ Sample cache capacity bitmasks for a bitlength of 8 are shown below. Please
+ note that all (and only) contiguous '1' combinations are allowed (e.g. FFFFH,
+ 0FF0H, 003CH, etc.).
+
+ ```
+ +----+----+----+----+----+----+----+----+
+ | M7 | M6 | M5 | M4 | M3 | M2 | M1 | M0 |
+ +----+----+----+----+----+----+----+----+
+ COS0 | A | A | A | A | A | A | A | A | Default Bitmask
+ +----+----+----+----+----+----+----+----+
+ COS1 | A | A | A | A | A | A | A | A |
+ +----+----+----+----+----+----+----+----+
+ COS2 | A | A | A | A | A | A | A | A |
+ +----+----+----+----+----+----+----+----+
+
+ +----+----+----+----+----+----+----+----+
+ | M7 | M6 | M5 | M4 | M3 | M2 | M1 | M0 |
+ +----+----+----+----+----+----+----+----+
+ COS0 | A | A | A | A | A | A | A | A | Overlapped Bitmask
+ +----+----+----+----+----+----+----+----+
+ COS1 | | | | | A | A | A | A |
+ +----+----+----+----+----+----+----+----+
+ COS2 | | | | | | | A | A |
+ +----+----+----+----+----+----+----+----+
+
+ +----+----+----+----+----+----+----+----+
+ | M7 | M6 | M5 | M4 | M3 | M2 | M1 | M0 |
+ +----+----+----+----+----+----+----+----+
+ COS0 | A | A | A | A | | | | | Isolated Bitmask
+ +----+----+----+----+----+----+----+----+
+ COS1 | | | | | A | A | | |
+ +----+----+----+----+----+----+----+----+
+ COS2 | | | | | | | A | A |
+ +----+----+----+----+----+----+----+----+
+ ```
+
+ We can get the CBM length through CPUID. The default value of CBM is calcul-
+ ated by `(1ull << cbm_len) - 1`. That is a fully open bitmask, all ones bitm-
+ ask. The COS[0] always stores the default value without change.
+
+ There is a `IA32_PQR_ASSOC` register which stores the COS ID of the VCPU. HW
+ enforces cache allocation according to the corresponding CBM.
+
+## The relationship between L3 CAT/CDP and L2 CAT
+
+ HW may support all features. By default, CDP is disabled on the processor.
+ If the L3 CAT MSRs are used without enabling CDP, the processor operates in
+ a traditional CAT-only mode. When CDP is enabled:
+ * the CAT mask MSRs are re-mapped into interleaved pairs of mask MSRs for
+ data or code fetches.
+ * the range of COS for CAT is re-indexed, with the lower-half of the COS
+ range available for CDP.
+
+ L2 CAT is independent of L3 CAT/CDP, which means L2 CAT can be enabled while
+ L3 CAT/CDP is disabled, or L2 CAT and L3 CAT/CDP are both enabled.
+
+ As a requirement, the bits of CBM of CAT/CDP must be continuous.
+
+ N.B. L2 CAT and L3 CAT/CDP share the same COS field in the same associate
+ register `IA32_PQR_ASSOC`, which means one COS is associated with a pair of
+ L2 CAT CBM and L3 CAT/CDP CBM.
+
+ Besides, the max COS of L2 CAT may be different from L3 CAT/CDP (or other
+ PSR features in future). In some cases, a domain is permitted to have a COS
+ that is beyond one (or more) of PSR features but within the others. For
+ instance, let's assume the max COS of L2 CAT is 8 but the max COS of L3
+ CAT is 16, when a domain is assigned 9 as COS, the L3 CAT CBM associated to
+ COS 9 would be enforced, but for L2 CAT, the HW works as default value is
+ set since COS 9 is beyond the max COS (8) of L2 CAT.
+
+## Design Overview
+
+* Core COS/CBM association
+
+ When enforcing CAT/CDP, all cores of domains have the same default COS (COS0)
+ which is associated with the fully open CBM (all ones bitmask) to access all
+ cache. The default COS is used only in hypervisor and is transparent to tool
+ stack and user.
+
+ System administrator can change PSR allocation policy at runtime by tool
stack.
+ Since L2 CAT shares COS with L3 CAT/CDP, a COS corresponds to a 2-tuple, like
+ [L2 CBM, L3 CBM] with only-CAT enabled, when CDP is enabled, one COS
correspo-
+ nds to a 3-tuple, like [L2 CBM, L3 Code_CBM, L3 Data_CBM]. If neither L3 CAT
+ nor L3 CDP is enabled, things would be easier, one COS corresponds to one L2
+ CBM.
+
+* VCPU schedule
+
+ When context switch happens, the COS of VCPU is written to per-thread MSR
+ `IA32_PQR_ASSOC`, and then hardware enforces cache allocation according to
+ the corresponding CBM.
+
+* Multi-sockets
+
+ Different sockets may have different CAT/CDP capability (e.g. max COS) alth-
+ ough it is consistent on the same socket. So the capability of per-socket
CAT/
+ CDP is specified.
+
+ 'psr-cat-set' can set CBM for one domain per socket. On each socket, we main-
+ tain a COS array for all domains. One domain uses one COS at one time. One
COS
+ stores the CBM of the domain to work. So, when a VCPU of the domain is
migrat-
+ ed from socket 1 to socket 2, it follows configuration on socket 2.
+
+ E.g. user sets domain 1 CBM on socket 1 to 0x7f which uses COS 9 but sets do-
+ main 1 CBM on socket 2 to 0x3f which uses COS 7. When VCPU of this domain
+ is migrated from socket 1 to 2, the COS ID used is 7, that means 0x3f is the
+ CBM to work for this domain 1 now.
+
+## Implementation Description
+
+* Hypervisor interfaces:
+
+ 1. Boot line parameter "psr=cat" enables L2 CAT and L3 CAT if hardware suppo-
+ rted. "psr=cdp" enables CDP if hardware supported.
+
+ 2. SYSCTL:
+ - XEN_SYSCTL_PSR_CAT_get_l3_info: Get L3 CAT/CDP information.
+ - XEN_SYSCTL_PSR_CAT_get_l2_info: Get L2 CAT information.
+
+ 3. DOMCTL:
+ - XEN_DOMCTL_PSR_CAT_OP_GET_L3_CBM: Get L3 CBM for a domain.
+ - XEN_DOMCTL_PSR_CAT_OP_SET_L3_CBM: Set L3 CBM for a domain.
+ - XEN_DOMCTL_PSR_CAT_OP_GET_L3_CODE: Get CDP Code CBM for a domain.
+ - XEN_DOMCTL_PSR_CAT_OP_SET_L3_CODE: Set CDP Code CBM for a domain.
+ - XEN_DOMCTL_PSR_CAT_OP_GET_L3_DATA: Get CDP Data CBM for a domain.
+ - XEN_DOMCTL_PSR_CAT_OP_SET_L3_DATA: Set CDP Data CBM for a domain.
+ - XEN_DOMCTL_PSR_CAT_OP_GET_L2_CBM: Get L2 CBM for a domain.
+ - XEN_DOMCTL_PSR_CAT_OP_SET_L2_CBM: Set L2 CBM for a domain.
+
+* xl interfaces:
+
+ 1. psr-cat-show -lX domain-id
+ Show LX cbm for a domain.
+ => XEN_SYSCTL_PSR_CAT_get_l3_info /
+ XEN_SYSCTL_PSR_CAT_get_l2_info /
+ XEN_DOMCTL_PSR_CAT_OP_GET_L3_CBM /
+ XEN_DOMCTL_PSR_CAT_OP_GET_L3_CODE /
+ XEN_DOMCTL_PSR_CAT_OP_GET_L3_DATA /
+ XEN_DOMCTL_PSR_CAT_OP_GET_L2_CBM
+
+ 2. psr-cat-set -lX domain-id cbm
+ Set LX cbm for a domain.
+ => XEN_DOMCTL_PSR_CAT_OP_SET_L3_CBM /
+ XEN_DOMCTL_PSR_CAT_OP_SET_L3_CODE /
+ XEN_DOMCTL_PSR_CAT_OP_SET_L3_DATA /
+ XEN_DOMCTL_PSR_CAT_OP_SET_L2_CBM
+
+ 3. psr-hwinfo
+ Show PSR HW information, including L3 CAT/CDP/L2 CAT
+ => XEN_SYSCTL_PSR_CAT_get_l3_info /
+ XEN_SYSCTL_PSR_CAT_get_l2_info
+
+* Key data structure:
+
+ 1. Feature properties
+
+ ```
+ static const struct feat_props {
+ unsigned int cos_num;
+ enum cbm_type type[PSR_MAX_COS_NUM];
+ bool (*get_feat_info)(const struct feat_node *feat,
+ uint32_t data[], unsigned int array_len);
+ void (*write_msr)(unsigned int cos, uint32_t val, enum cbm_type
type);
+ } *feat_props[PSR_SOCKET_FEAT_NUM];
+ ```
+
+ Every feature has its own properties, e.g. some data and actions. A
+ feature property pointer array is declared to save every feature's
+ properties.
+
+ - Member `cos_num`
+
+ `cos_num` is the number of COS registers the feature uses, e.g. L3/L2
+ CAT uses 1 register but CDP uses 2 registers.
+
+ - Member `type`
+
+ `type` is an array to save all 'enum cbm_type' values of the feature.
+ It is used with cos_num together to get/write a feature's COS registers
+ values one by one.
+
+ - Member `get_feat_info`
+
+ `get_feat_info` is used to return feature HW info through sysctl.
+
+ - Member `write_msr`
+
+ `write_msr` is used to write out feature MSR register.
+
+ 2. Feature node
+
+ ```
+ struct feat_node {
+ unsigned int cos_max;
+ unsigned int cbm_len;
+ uint32_t cos_reg_val[MAX_COS_REG_CNT];
+ };
+ ```
+
+ When a PSR enforcement feature is enabled, it will be added into a
+ feature array.
+
+ - Member `cos_max`
+
+ `cos_max` is one of the hardware info of CAT. It means the max number
+ of COS registers. As L3 CAT/CDP/L2 CAT all have it, it is declared in
+ `feat_node`.
+
+ - Member `cbm_len`
+
+ `cbm_len` is one of the hardware info of CAT. It means the max number
+ of bits to set.
+
+ - Member `cos_reg_val`
+
+ `cos_reg_val` is an array to maintain the value set in all COS
registers
+ of the feature. The array is indexed by COS ID.
+
+ 3. Per-socket PSR features information structure
+
+ ```
+ struct psr_socket_info {
+ bool feat_init;
+ struct feat_node *features[PSR_SOCKET_FEAT_NUM];
+ spinlock_t ref_lock;
+ unsigned int cos_ref[MAX_COS_REG_CNT];
+ DECLARE_BITMAP(dom_ids, DOMID_IDLE + 1);
+ };
+ ```
+
+ We collect all PSR allocation features information of a socket in this
+ `struct psr_socket_info`.
+
+ - Member `feat_init`
+
+ `feat_init` is a flag, to indicate whether the CPU init on a socket
+ has been done.
+
+ - Member `features`
+
+ `features` is a pointer array to save all enabled features poniters
+ according to feature position defined in `enum psr_feat_type`.
+
+ - Member `ref_lock`
+
+ `ref_lock` is a spin lock to protect `cos_ref`.
+
+ - Member `cos_ref`
+
+ `cos_ref` is an array which maintains the reference of one COS. It maps
+ to cos_reg_val[MAX_COS_REG_NUM] in `struct feat_node`. If one COS is
+ used by one domain, the corresponding reference will increase by one.
If
+ a domain releases the COS, the reference will decrease by one. The
array
+ is indexed by COS ID.
+
+ - Member `dom_ids`
+
+ `dom_ids` is a bitmap, every bit corresponds to a domain. Index is
+ domain_id. It is used to help restore domain_id to 0 when a socket is
+ offline and then online again.
+
+# Limitations
+
+CAT/CDP can only work on HW which enables it(check by CPUID). So far, there is
+no HW which enables both L2 CAT and L3 CAT/CDP. But SW implementation has cons-
+idered such scenario to enable both L2 CAT and L3 CAT/CDP.
+
+# Testing
+
+We can execute above xl commands to verify L2 CAT and L3 CAT/CDP on different
+HWs support them.
+
+For example:
+ root@:~$ xl psr-hwinfo --cat
+ Cache Allocation Technology (CAT): L2
+ Socket ID : 0
+ Maximum COS : 3
+ CBM length : 8
+ Default CBM : 0xff
+
+ root@:~$ xl psr-cat-cbm-set -l2 1 0x7f
+
+ root@:~$ xl psr-cat-show -l2 1
+ Socket ID : 0
+ Default CBM : 0xff
+ ID NAME CBM
+ 1 ubuntu14 0x7f
+
+# Areas for improvement
+
+A hexadecimal number is used to set/show CBM for a domain now. Although this
+is convenient to cover overlap/isolated bitmask requirement, it is not user-
+friendly.
+
+To improve this, the libxl interfaces can be wrapped in libvirt to provide more
+usr-friendly interfaces to user, e.g. a percentage number of the cache to set
+and show.
+
+# Known issues
+
+N/A
+
+# References
+
+"INTEL® RESOURCE DIRECTOR TECHNOLOGY (INTEL® RDT) ALLOCATION FEATURES" [Intel®
64 and IA-32 Architectures Software Developer Manuals,
vol3](http://www.intel.com/content/www/us/en/processors/architectures-software-developer-manuals.html)
+
+# History
+
+------------------------------------------------------------------------
+Date Revision Version Notes
+---------- -------- -------- -------------------------------------------
+2016-08-12 1.0 Xen 4.9 Design document written
+2017-02-13 1.7 Xen 4.9 Changes:
+ 1. Modify the design document to cover L3
+ CAT/CDP and L2 CAT;
+ 2. Fix typos;
+ 3. Amend description of `feat_mask` to make
+ it clearer;
+ 4. Other minor changes.
+2017-02-15 1.8 Xen 4.9 Changes:
+ 1. Add content in 'Areas for improvement';
+ 2. Adjust revision number.
+2017-03-16 1.9 Xen 4.9 Changes:
+ 1. Add 'CMT' in 'Terminology';
+ 2. Change 'feature list' to 'feature array'.
+ 3. Modify data structure descriptions.
+ 4. Adjust revision number.
+2017-05-03 1.11 Xen 4.9 Changes:
+ 1. Modify data structure descriptions.
+ 2. Adjust revision number.
+---------- -------- -------- -------------------------------------------
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |