|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH 6/7] osstest: add a FreeBSD build to flights
This requires changes in several places in order to accommodate the FreeBSD
build, which although it's a build job, it doesn't have the same set of
dependencies as the current builds.
First, a new build recipe is added to sg-run-job, and accordingly sg-run-job is
also made aware about the differences between a Linux and a FreeBSD build job.
A Linux build job requires ts-host-allocate + ts-host-install-twice +
ts-xen-build-prep, while a FreeBSD build job requires ts-host-allocate +
ts-freebsd-host-install.
All the current build jobs are kept to use the Linux build recipe, while the
newly added build-freebsd is using the new FreeBSD recipe.
cri-getconfig is also modified to introduce two new helpers, used to fetch a
runvar and a stashed file from a specific job. This is needed by the FreeBSD
build job creator in order to fetch information from a previous buildjob (so
the output from a previous buildjob can be used as input to a new buildjob).
Finally, the logic to create a FreeBSD build job is added to mfi-common. This
includes creating a FreeBSD build job, and also testing the output of that
build job (by creating another build job that depends on the output of the
first).
Note that the FreeBSD build job needs some input in order to setup a FreeBSD
host, and that can be fetched from different places:
1. Env variable FREEBSD_BUILDJOB: use the output from a previous
build-<arch>-freebsd.
2. Env variables FREEBSD_IMAGE, FREEBSD_SETS, FREEBSD_VERSION: set before
calling into make-flight, provide the installer image, the sets to install and
the version being installed.
3. Config file FreeBSDImage, FreeBSDSets and FreeBSDVersion: same as 2. except
that they are set on the config file.
Signed-off-by: Roger Pau Monné <roger.pau@xxxxxxxxxx>
---
ap-common | 4 ++++
cri-getconfig | 37 ++++++++++++++++++++++++++++++++
mfi-common | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
sg-run-job | 39 +++++++++++++++++++++++-----------
4 files changed, 136 insertions(+), 12 deletions(-)
diff --git a/ap-common b/ap-common
index cbb815ce..d4fa7aef 100644
--- a/ap-common
+++ b/ap-common
@@ -37,6 +37,10 @@
: ${PUSH_TREE_XTF:=$XENBITS:/home/xen/git/xtf.git}
: ${BASE_TREE_XTF:=git://xenbits.xen.org/xtf.git}
+: ${TREE_FREEBSD:=git://github.com/freebsd/freebsd.git}
+: ${PUSH_TREE_FREEBSD:=$XENBITS:/home/xen/git/freebsd.git}
+: ${BASE_TREE_FREEBSD:=git://xenbits.xen.org/freebsd.git}
+
: ${TREE_LIBVIRT:=git://libvirt.org/libvirt.git}
: ${PUSH_TREE_LIBVIRT:=$XENBITS:/home/xen/git/libvirt.git}
: ${BASE_TREE_LIBVIRT:=git://xenbits.xen.org/libvirt.git}
diff --git a/cri-getconfig b/cri-getconfig
index b2c91ac7..b7f7ae0c 100644
--- a/cri-getconfig
+++ b/cri-getconfig
@@ -25,6 +25,43 @@ getconfig () {
'
}
+# Get the path to a stashed file from another job.
+#
+# $1: current flight
+# $2: current job
+# $3: name of the stashed file
+# $4: flight (optional) and job where to fetch the stashed file from
+# (in $flight.$job format or $job).
+getstashed() {
+ perl -e '
+ use Osstest;
+ use Osstest::TestSupport;
+ csreadconfig();
+ $flight = "'$1'";
+ $job = "'$2'";
+ print get_stashed("'$3'", "'$4'") or die $!;
+ '
+}
+
+# Get a runvar from another job.
+#
+# $1: current flight
+# $2: current job
+# $3: name of the runvar
+# $4: flight (optional) and job where to fetch the runvar from
+# (in $flight.$job format or $job).
+
+getrunvar() {
+ perl -e '
+ use Osstest;
+ use Osstest::TestSupport;
+ csreadconfig();
+ $flight = "'$1'";
+ $job = "'$2'";
+ print get_runvar("'$3'", "'$4'") or die $!;
+ '
+}
+
getconfig_TftpDiVersion_suite () {
perl -e '
use Osstest;
diff --git a/mfi-common b/mfi-common
index ec31e2ef..0f85e90a 100644
--- a/mfi-common
+++ b/mfi-common
@@ -96,6 +96,54 @@ set_hostos_runvars () {
esac
}
+set_freebsd_build_job_flags () {
+ arch=$1
+ job="build-$arch-freebsd"
+
+ # Figure out where are the installer binaries. The order is the following:
+ #
+ # 1. Env variable FREEBSD_BUILDJOB: use the output from a previous
+ # build-<arch>-freebsd.
+ #
+ # 2. Env variables FREEBSD_IMAGE, FREEBSD_SETS, FREEBSD_VERSION: set
+ # before calling into make-flight, provide the installer image, the sets
+ # to install and the version being installed.
+ #
+ # 3. Config file FreeBSDImage, FreeBSDSets and FreeBSDVersion: same as 2.
+ # except that they are set on the config file.
+ #
+ # This is slightly convoluted because in order to fetch a runvar or stashed
+ # file osstest needs a current flight and job, so the FreeBSD build flight
+ # is created with missing runvars, then this newly created job is used to
+ # fetch runvars from other jobs if needed, and finally the missing runvars
+ # in the newly created flight are set using cs-adjust-flight.
+ if [ -n "$FREEBSD_BUILDJOB" ]; then
+ image=`getstashed $flight $job "path_freebsd-image" $FREEBSD_BUILDJOB`
+ version=`getrunvar $flight $job "freebsd_version" $FREEBSD_BUILDJOB`
+ ./cs-adjust-flight $flight runvar-set $job freebsd_buildjob \
+ $FREEBSD_BUILDJOB
+ elif [ -n "$FREEBSD_IMAGE" ] && [ -n "$FREEBSD_SETS" ] && \
+ [ -n "$FREEBSD_VERSION" ]; then
+ image=$FREEBSD_IMAGE
+ version=$FREEBSD_VERSION
+ ./cs-adjust-flight $flight runvar-set $job freebsd_image $FREEBSD_IMAGE
+ ./cs-adjust-flight $flight runvar-set $job freebsd_sets $FREEBSD_SETS
+ else
+ image=`getconfig "FreeBSDImage"`
+ sets=`getconfig "FreeBSDSets"`
+ version=`getconfig "FreeBSDVersion"`
+ ./cs-adjust-flight $flight runvar-set $job freebsd_image $image
+ ./cs-adjust-flight $flight runvar-set $job freebsd_sets $sets
+ fi
+
+ hash=`sha256sum $image | head -c 16`
+ ./cs-adjust-flight $flight runvar-set $job \
+ host_hostflags \
+
share-build-freebsd-$arch-$hash,arch-$arch,freebsd-$version,purpose-build
+
+ echo $version
+}
+
create_build_jobs () {
local arch
@@ -325,6 +373,26 @@ create_build_jobs () {
fi
+ case $arch in
+ amd64)
+ job_create_build build-$arch-freebsd build-freebsd \
+ arch=$arch \
+ $RUNVARS $BUILD_RUNVARS $BUILD_FREEBSD_RUNVARS $arch_runvars \
+ tree_freebsd=$TREE_FREEBSD \
+ revision_freebsd=$REVISION_FREEBSD
+ freebsd_version=`set_freebsd_build_job_flags $arch`
+ # Pass new hostflags, now the buildhost must not be shared, since we are
+ # testing the newly built image
+ job_create_build build-$arch-freebsd-again build-freebsd \
+ arch=$arch \
+ $RUNVARS $BUILD_RUNVARS $BUILD_FREEBSD_RUNVARS $arch_runvars \
+
host_hostflags=arch-$arch,freebsd-$freebsd_version,purpose-build \
+ tree_freebsd=$TREE_FREEBSD \
+ revision_freebsd=$REVISION_FREEBSD \
+ freebsd_buildjob=build-$arch-freebsd
+ ;;
+ esac
+
case "$arch" in
arm*) continue;; # don't do any other kernel builds
esac
diff --git a/sg-run-job b/sg-run-job
index ceb79800..c480a02b 100755
--- a/sg-run-job
+++ b/sg-run-job
@@ -53,12 +53,15 @@ proc run-job {job} {
set skip_globs [jobdb::read-runvar $flight $job skip_testids]
set nh [need-hosts/$jobinfo(recipe)]
- if {![string compare $nh BUILD]} {
+ if {![string compare $nh BUILD_LINUX]} {
set need_xen_hosts {}
- set need_build_host 1
+ set need_build_host LINUX
+ } elseif {![string compare $nh BUILD_FREEBSD]} {
+ set need_xen_hosts {}
+ set need_build_host FREEBSD
} else {
set need_xen_hosts $nh
- set need_build_host 0
+ set need_build_host ""
}
set nested_layers_hosts {}
@@ -69,7 +72,8 @@ proc run-job {job} {
eval run-ts broken = ts-hosts-allocate + $need_xen_hosts
}
- if {$need_build_host} { catching-otherwise broken prepare-build-host }
+ if {![string compare $need_build_host LINUX]} { catching-otherwise broken
prepare-build-host-linux }
+ if {![string compare $need_build_host FREEBSD]} { catching-otherwise
broken prepare-build-host-freebsd }
if {$ok} { setstatus running }
@@ -89,7 +93,7 @@ proc run-job {job} {
set need_xen_hosts [lunappend nested_layers_hosts]
}
- if {$need_build_host && $anyfailed} {
+ if {[string length $need_build_host] && $anyfailed} {
run-ts !broken capture-logs ts-logs-capture + host
}
@@ -106,7 +110,7 @@ proc run-job {job} {
if {$ok} { setstatus pass }
- if {$need_build_host && $ok} { jobdb::preserve-task 90 }
+ if {[string length $need_build_host] && $ok} { jobdb::preserve-task 90 }
if {$anyfailed} {
jobdb::logputs stdout "at least one test failed"
@@ -535,11 +539,12 @@ proc need-hosts/host-examine-linux {} {
#---------- builds ----------
-proc need-hosts/build {} { return BUILD }
-proc need-hosts/build-kern {} { return BUILD }
-proc need-hosts/build-libvirt {} { return BUILD }
-proc need-hosts/build-rumprun {} { return BUILD }
-proc need-hosts/build-xtf {} { return BUILD }
+proc need-hosts/build {} { return BUILD_LINUX }
+proc need-hosts/build-kern {} { return BUILD_LINUX }
+proc need-hosts/build-libvirt {} { return BUILD_LINUX }
+proc need-hosts/build-rumprun {} { return BUILD_LINUX }
+proc need-hosts/build-xtf {} { return BUILD_LINUX }
+proc need-hosts/build-freebsd {} { return BUILD_FREEBSD }
proc run-job/build {} {
run-ts . = ts-xen-build
@@ -566,13 +571,23 @@ proc run-job/build-xtf {} {
run-ts . = ts-xtf-build
}
-proc prepare-build-host {} {
+proc run-job/build-freebsd {} {
+ run-ts . = ts-freebsd-build
+}
+
+proc prepare-build-host-linux {} {
global jobinfo
run-ts broken = ts-hosts-allocate + host
run-ts broken host-install(*) ts-host-install-twice
run-ts . host-build-prep ts-xen-build-prep
}
+proc prepare-build-host-freebsd {} {
+ global jobinfo
+ run-ts broken = ts-hosts-allocate + host
+ run-ts broken host-install(*) ts-freebsd-host-install
+}
+
proc need-hosts/coverity {} { return BUILD }
proc run-job/coverity {} {
run-ts . = ts-coverity-build + host
--
2.11.0 (Apple Git-81)
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |