|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [qemu-mainline test] 107644: regressions - FAIL
flight 107644 qemu-mainline real [real] http://logs.test-lab.xenproject.org/osstest/logs/107644/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: test-amd64-amd64-xl-pvh-amd 19 guest-start/debian.repeat fail REGR. vs. 107636 Tests which did not succeed, but are not blocking: test-armhf-armhf-libvirt 13 saverestore-support-check fail like 107636 test-armhf-armhf-libvirt-xsm 13 saverestore-support-check fail like 107636 test-amd64-amd64-xl-qemuu-win7-amd64 16 guest-stop fail like 107636 test-amd64-i386-xl-qemuu-win7-amd64 16 guest-stop fail like 107636 test-armhf-armhf-libvirt-raw 12 saverestore-support-check fail like 107636 test-amd64-amd64-xl-rtds 9 debian-install fail like 107636 test-amd64-amd64-libvirt-xsm 12 migrate-support-check fail never pass test-amd64-amd64-libvirt 12 migrate-support-check fail never pass test-amd64-i386-libvirt 12 migrate-support-check fail never pass test-amd64-i386-libvirt-xsm 12 migrate-support-check fail never pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check fail never pass test-arm64-arm64-xl-credit2 12 migrate-support-check fail never pass test-arm64-arm64-xl-multivcpu 12 migrate-support-check fail never pass test-arm64-arm64-xl-multivcpu 13 saverestore-support-check fail never pass test-arm64-arm64-xl-credit2 13 saverestore-support-check fail never pass test-arm64-arm64-libvirt-xsm 12 migrate-support-check fail never pass test-arm64-arm64-libvirt-xsm 13 saverestore-support-check fail never pass test-arm64-arm64-xl 12 migrate-support-check fail never pass test-arm64-arm64-xl 13 saverestore-support-check fail never pass test-arm64-arm64-libvirt 12 migrate-support-check fail never pass test-arm64-arm64-libvirt 13 saverestore-support-check fail never pass test-arm64-arm64-xl-xsm 12 migrate-support-check fail never pass test-arm64-arm64-xl-xsm 13 saverestore-support-check fail never pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check fail never pass test-arm64-arm64-xl-rtds 12 migrate-support-check fail never pass test-arm64-arm64-xl-rtds 13 saverestore-support-check fail never pass test-arm64-arm64-libvirt-qcow2 11 migrate-support-check fail never pass test-arm64-arm64-libvirt-qcow2 12 saverestore-support-check fail never pass test-armhf-armhf-xl-arndale 12 migrate-support-check fail never pass test-armhf-armhf-xl-arndale 13 saverestore-support-check fail never pass test-amd64-amd64-qemuu-nested-amd 16 debian-hvm-install/l1/l2 fail never pass test-amd64-amd64-libvirt-vhd 11 migrate-support-check fail never pass test-armhf-armhf-xl-cubietruck 12 migrate-support-check fail never pass test-armhf-armhf-xl-cubietruck 13 saverestore-support-check fail never pass test-armhf-armhf-libvirt 12 migrate-support-check fail never pass test-armhf-armhf-libvirt-xsm 12 migrate-support-check fail never pass test-armhf-armhf-libvirt-raw 11 migrate-support-check fail never pass test-armhf-armhf-xl-rtds 12 migrate-support-check fail never pass test-armhf-armhf-xl-rtds 13 saverestore-support-check fail never pass test-armhf-armhf-xl-vhd 11 migrate-support-check fail never pass test-armhf-armhf-xl-vhd 12 saverestore-support-check fail never pass test-armhf-armhf-xl-multivcpu 12 migrate-support-check fail never pass test-armhf-armhf-xl-multivcpu 13 saverestore-support-check fail never pass test-armhf-armhf-xl 12 migrate-support-check fail never pass test-armhf-armhf-xl 13 saverestore-support-check fail never pass test-armhf-armhf-xl-xsm 12 migrate-support-check fail never pass test-armhf-armhf-xl-xsm 13 saverestore-support-check fail never pass test-armhf-armhf-xl-credit2 12 migrate-support-check fail never pass test-armhf-armhf-xl-credit2 13 saverestore-support-check fail never pass version targeted for testing: qemuu f4b5b021c847669b1c78050aea26fe9abceef6dd baseline version: qemuu eab1e53cacfb1d877317d5e7b416ddb43858d92e Last test of basis 107636 2017-04-24 21:15:22 Z 1 days Testing same since 107644 2017-04-25 10:26:10 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Ashish Mittal <Ashish.Mittal@xxxxxxxxxxx> Ashish Mittal <ashmit602@xxxxxxxxx> Jeff Cody <jcody@xxxxxxxxxx> Peter Maydell <peter.maydell@xxxxxxxxxx> jobs: build-amd64-xsm pass build-arm64-xsm pass build-armhf-xsm pass build-i386-xsm pass build-amd64 pass build-arm64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-arm64-libvirt pass build-armhf-libvirt pass build-i386-libvirt pass build-amd64-pvops pass build-arm64-pvops pass build-armhf-pvops pass build-i386-pvops pass test-amd64-amd64-xl pass test-arm64-arm64-xl pass test-armhf-armhf-xl pass test-amd64-i386-xl pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-libvirt-xsm pass test-arm64-arm64-libvirt-xsm pass test-armhf-armhf-libvirt-xsm pass test-amd64-i386-libvirt-xsm pass test-amd64-amd64-xl-xsm pass test-arm64-arm64-xl-xsm pass test-armhf-armhf-xl-xsm pass test-amd64-i386-xl-xsm pass test-amd64-amd64-qemuu-nested-amd fail test-amd64-amd64-xl-pvh-amd fail test-amd64-i386-qemuu-rhel6hvm-amd pass test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-freebsd10-amd64 pass test-amd64-amd64-xl-qemuu-ovmf-amd64 pass test-amd64-i386-xl-qemuu-ovmf-amd64 pass test-amd64-amd64-xl-qemuu-win7-amd64 fail test-amd64-i386-xl-qemuu-win7-amd64 fail test-armhf-armhf-xl-arndale pass test-amd64-amd64-xl-credit2 pass test-arm64-arm64-xl-credit2 pass test-armhf-armhf-xl-credit2 pass test-armhf-armhf-xl-cubietruck pass test-amd64-i386-freebsd10-i386 pass test-amd64-amd64-qemuu-nested-intel pass test-amd64-amd64-xl-pvh-intel pass test-amd64-i386-qemuu-rhel6hvm-intel pass test-amd64-amd64-libvirt pass test-arm64-arm64-libvirt pass test-armhf-armhf-libvirt pass test-amd64-i386-libvirt pass test-amd64-amd64-xl-multivcpu pass test-arm64-arm64-xl-multivcpu pass test-armhf-armhf-xl-multivcpu pass test-amd64-amd64-pair pass test-amd64-i386-pair pass test-amd64-amd64-libvirt-pair pass test-amd64-i386-libvirt-pair pass test-amd64-amd64-amd64-pvgrub pass test-amd64-amd64-i386-pvgrub pass test-amd64-amd64-pygrub pass test-arm64-arm64-libvirt-qcow2 pass test-amd64-amd64-xl-qcow2 pass test-armhf-armhf-libvirt-raw pass test-amd64-i386-xl-raw pass test-amd64-amd64-xl-rtds fail test-arm64-arm64-xl-rtds pass test-armhf-armhf-xl-rtds pass test-amd64-i386-xl-qemuu-winxpsp3-vcpus1 pass test-amd64-amd64-libvirt-vhd pass test-armhf-armhf-xl-vhd pass test-amd64-amd64-xl-qemuu-winxpsp3 pass test-amd64-i386-xl-qemuu-winxpsp3 pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit f4b5b021c847669b1c78050aea26fe9abceef6dd Merge: eab1e53 ecfa185 Author: Peter Maydell <peter.maydell@xxxxxxxxxx> Date: Tue Apr 25 09:21:54 2017 +0100 Merge remote-tracking branch 'remotes/cody/tags/block-pull-request' into staging # gpg: Signature made Mon 24 Apr 2017 20:18:05 BST # gpg: using RSA key 0xBDBE7B27C0DE3057 # gpg: Good signature from "Jeffrey Cody <jcody@xxxxxxxxxx>" # gpg: aka "Jeffrey Cody <jeff@xxxxxxxxxxxxx>" # gpg: aka "Jeffrey Cody <codyprime@xxxxxxxxx>" # Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057 * remotes/cody/tags/block-pull-request: qemu-iotests: _cleanup_qemu must be called on exit block/rbd: Add support for reopen() block/rbd - update variable names to more apt names block: use bdrv_can_set_read_only() during reopen block: introduce bdrv_can_set_read_only() block: code movement block: honor BDRV_O_ALLOW_RDWR when clearing bs->read_only block: do not set BDS read_only if copy_on_read enabled block: add bdrv_set_read_only() helper function qemu-iotests: exclude vxhs from image creation via protocol block/vxhs.c: Add qemu-iotests for new block device type "vxhs" block/vxhs.c: Add support for a new block device type called "vxhs" Signed-off-by: Peter Maydell <peter.maydell@xxxxxxxxxx> commit ecfa185400ade2abc9915efa924cbad1e15a21a4 Author: Jeff Cody <jcody@xxxxxxxxxx> Date: Tue Apr 18 15:42:41 2017 -0400 qemu-iotests: _cleanup_qemu must be called on exit For the tests that use the common.qemu functions for running a QEMU process, _cleanup_qemu must be called in the exit function. If it is not, if the qemu process aborts, then not all of the droppings are cleaned up (e.g. pidfile, fifos). This updates those tests that did not have a cleanup in qemu-iotests. (I swapped spaces for tabs in test 102 as well) Reported-by: Eric Blake <eblake@xxxxxxxxxx> Reviewed-by: Eric Blake <eblake@xxxxxxxxxx> Signed-off-by: Jeff Cody <jcody@xxxxxxxxxx> Message-id: d59c2f6ad6c1da8b9b3c7f357c94a7122ccfc55a.1492544096.git.jcody@xxxxxxxxxx commit 56e7cf8df03ae142c7797435dc0ece80a42f4fd0 Author: Jeff Cody <jcody@xxxxxxxxxx> Date: Fri Apr 7 16:55:32 2017 -0400 block/rbd: Add support for reopen() This adds support for reopen in rbd, for changing between r/w and r/o. Note, that this is only a flag change, but we will block a change from r/o to r/w if we are using an RBD internal snapshot. Reviewed-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> Signed-off-by: Jeff Cody <jcody@xxxxxxxxxx> Reviewed-by: John Snow <jsnow@xxxxxxxxxx> Message-id: d4e87539167ec6527d44c97b164eabcccf96e4f3.1491597120.git.jcody@xxxxxxxxxx commit 80b61a27c69c67492ce87ddd63ee497b5bc00e7e Author: Jeff Cody <jcody@xxxxxxxxxx> Date: Fri Apr 7 16:55:31 2017 -0400 block/rbd - update variable names to more apt names Update 'clientname' to be 'user', which tracks better with both the QAPI and rados variable naming. Update 'name' to be 'image_name', as it indicates the rbd image. Naming it 'image' would have been ideal, but we are using that for the rados_image_t value returned by rbd_open(). Reviewed-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> Signed-off-by: Jeff Cody <jcody@xxxxxxxxxx> Reviewed-by: John Snow <jsnow@xxxxxxxxxx> Message-id: b7ec1fb2e1cf36f9b6911631447a5b0422590b7d.1491597120.git.jcody@xxxxxxxxxx commit 3d8ce171cb4a62b55727bc949e2e9427f77de6fb Author: Jeff Cody <jcody@xxxxxxxxxx> Date: Fri Apr 7 16:55:30 2017 -0400 block: use bdrv_can_set_read_only() during reopen Signed-off-by: Jeff Cody <jcody@xxxxxxxxxx> Reviewed-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> Reviewed-by: John Snow <jsnow@xxxxxxxxxx> Message-id: 00aed7ffdd7be4b9ed9ce1007d50028a72b34ebe.1491597120.git.jcody@xxxxxxxxxx commit 45803a039670cbee914dcb54cf3952f9b2d64d1f Author: Jeff Cody <jcody@xxxxxxxxxx> Date: Fri Apr 7 16:55:29 2017 -0400 block: introduce bdrv_can_set_read_only() Introduce check function for setting read_only flags. Will return < 0 on error, with appropriate Error value set. Does not alter any flags. Signed-off-by: Jeff Cody <jcody@xxxxxxxxxx> Reviewed-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> Reviewed-by: John Snow <jsnow@xxxxxxxxxx> Message-id: e2bba34ac3bc76a0c42adc390413f358ae0566e8.1491597120.git.jcody@xxxxxxxxxx commit 93ed524e3de732f70b3b042e3c56bc4ed719498d Author: Jeff Cody <jcody@xxxxxxxxxx> Date: Fri Apr 7 16:55:28 2017 -0400 block: code movement Move bdrv_is_read_only() up with its friends. Reviewed-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> Reviewed-by: John Snow <jsnow@xxxxxxxxxx> Signed-off-by: Jeff Cody <jcody@xxxxxxxxxx> Message-id: 73b2399459760c32506f9407efb9dddb3a2789de.1491597120.git.jcody@xxxxxxxxxx commit d6fcdf06d9fc7d72151cc2069dc5c1adf5c21707 Author: Jeff Cody <jcody@xxxxxxxxxx> Date: Fri Apr 7 16:55:27 2017 -0400 block: honor BDRV_O_ALLOW_RDWR when clearing bs->read_only The BDRV_O_ALLOW_RDWR flag allows / prohibits the changing of the BDS 'read_only' state, but there are a few places where it is ignored. In the bdrv_set_read_only() helper, make sure to honor the flag. Signed-off-by: Jeff Cody <jcody@xxxxxxxxxx> Reviewed-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> Reviewed-by: John Snow <jsnow@xxxxxxxxxx> Message-id: be2e5fb2d285cbece2b6d06bed54a6f56520d251.1491597120.git.jcody@xxxxxxxxxx commit e2b8247a322cd92945785edf25f09e6b3e8285f9 Author: Jeff Cody <jcody@xxxxxxxxxx> Date: Fri Apr 7 16:55:26 2017 -0400 block: do not set BDS read_only if copy_on_read enabled A few block drivers will set the BDS read_only flag from their .bdrv_open() function. This means the bs->read_only flag could be set after we enable copy_on_read, as the BDRV_O_COPY_ON_READ flag check occurs prior to the call to bdrv->bdrv_open(). This adds an error return to bdrv_set_read_only(), and an error will be return if we try to set the BDS to read_only while copy_on_read is enabled. This patch also changes the behavior of vvfat. Before, vvfat could override the drive 'readonly' flag with its own, internal 'rw' flag. For instance, this -drive parameter would result in a writable image: "-drive format=vvfat,dir=/tmp/vvfat,rw,if=virtio,readonly=on" This is not correct. Now, attempting to use the above -drive parameter will result in an error (i.e., 'rw' is incompatible with 'readonly=on'). Signed-off-by: Jeff Cody <jcody@xxxxxxxxxx> Reviewed-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> Reviewed-by: John Snow <jsnow@xxxxxxxxxx> Message-id: 0c5b4c1cc2c651471b131f21376dfd5ea24d2196.1491597120.git.jcody@xxxxxxxxxx commit fe5241bfe3fb61ec3f589ceacd91c1469bfd400f Author: Jeff Cody <jcody@xxxxxxxxxx> Date: Fri Apr 7 16:55:25 2017 -0400 block: add bdrv_set_read_only() helper function We have a helper wrapper for checking for the BDS read_only flag, add a helper wrapper to set the read_only flag as well. Reviewed-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> Signed-off-by: Jeff Cody <jcody@xxxxxxxxxx> Reviewed-by: John Snow <jsnow@xxxxxxxxxx> Message-id: 9b18972d05f5fa2ac16c014f0af98d680553048d.1491597120.git.jcody@xxxxxxxxxx commit a98f49f46abb2034277633405479a4ab790c381e Author: Jeff Cody <jcody@xxxxxxxxxx> Date: Tue Feb 14 09:51:42 2017 -0500 qemu-iotests: exclude vxhs from image creation via protocol The protocol VXHS does not support image creation. Some tests expect to be able to create images through the protocol. Exclude VXHS from these tests. Signed-off-by: Jeff Cody <jcody@xxxxxxxxxx> commit ae0c0a3decabba6b710d8e6902d43495f7490de2 Author: Ashish Mittal <ashmit602@xxxxxxxxx> Date: Mon Apr 3 20:48:09 2017 -0700 block/vxhs.c: Add qemu-iotests for new block device type "vxhs" These changes use a vxhs test server that is a part of the following repository: https://github.com/VeritasHyperScale/libqnio.git Signed-off-by: Ashish Mittal <Ashish.Mittal@xxxxxxxxxxx> Reviewed-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> Reviewed-by: Jeff Cody <jcody@xxxxxxxxxx> Signed-off-by: Jeff Cody <jcody@xxxxxxxxxx> Message-id: 1491277689-24949-3-git-send-email-Ashish.Mittal@xxxxxxxxxxx commit da92c3ff60b20392dd34902fb96304c4633b5fba Author: Ashish Mittal <ashmit602@xxxxxxxxx> Date: Mon Apr 3 20:48:08 2017 -0700 block/vxhs.c: Add support for a new block device type called "vxhs" Source code for the qnio library that this code loads can be downloaded from: https://github.com/VeritasHyperScale/libqnio.git Sample command line using JSON syntax: ./x86_64-softmmu/qemu-system-x86_64 -name instance-00000008 -S -vnc 0.0.0.0:0 -k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 -msg timestamp=on 'json:{"driver":"vxhs","vdisk-id":"c3e9095a-a5ee-4dce-afeb-2a59fb387410", "server":{"host":"172.172.17.4","port":"9999"}}' Sample command line using URI syntax: qemu-img convert -f raw -O raw -n /var/lib/nova/instances/_base/0c5eacd5ebea5ed914b6a3e7b18f1ce734c386ad vxhs://192.168.0.1:9999/c6718f6b-0401-441d-a8c3-1f0064d75ee0 Sample command line using TLS credentials (run in secure mode): ./qemu-io --object tls-creds-x509,id=tls0,dir=/etc/pki/qemu/vxhs,endpoint=client -c 'read -v 66000 2.5k' 'json:{"server.host": "127.0.0.1", "server.port": "9999", "vdisk-id": "/test.raw", "driver": "vxhs", "tls-creds":"tls0"}' [Jeff: Modified trace-events with the correct string formatting] Signed-off-by: Ashish Mittal <Ashish.Mittal@xxxxxxxxxxx> Reviewed-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> Reviewed-by: Jeff Cody <jcody@xxxxxxxxxx> Signed-off-by: Jeff Cody <jcody@xxxxxxxxxx> Message-id: 1491277689-24949-2-git-send-email-Ashish.Mittal@xxxxxxxxxxx _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |