|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v3 3/5] xen: sched: introduce the 'null' semi-static scheduler
In cases where one is absolutely sure that there will be
less vCPUs than pCPUs, having to pay the cost, mostly in
terms of overhead, of an advanced scheduler may be not
desirable.
The simple scheduler implemented here could be a solution.
Here how it works:
- each vCPU is statically assigned to a pCPU;
- if there are pCPUs without any vCPU assigned, they
stay idle (as in, the run their idle vCPU);
- if there are vCPUs which are not assigned to any
pCPU (e.g., because there are more vCPUs than pCPUs)
they *don't* run, until they get assigned;
- if a vCPU assigned to a pCPU goes away, one of the
waiting to be assigned vCPU, if any, gets assigned
to the pCPU and can run there.
This scheduler, therefore, if used in configurations
where every vCPUs can be assigned to a pCPU, guarantees
low overhead, low latency, and consistent performance.
If used as default scheduler, at Xen boot, it is
recommended to limit the number of Dom0 vCPUs (e.g., with
'dom0_max_vcpus=x'). Otherwise, all the pCPUs will have
one Dom0's vCPU assigned, and there won't be room for
running efficiently (if at all) any guest.
Target use cases are embedded and HPC, but it may well
be interesting also in circumnstances.
Kconfig and documentation are update accordingly.
While there, also document the availability of sched=rtds
as boot parameter, which apparently had been forgotten.
Signed-off-by: Dario Faggioli <dario.faggioli@xxxxxxxxxx>
Reviewed-by: George Dunlap <george.dunlap@xxxxxxxxxx>
---
Cc: Stefano Stabellini <sstabellini@xxxxxxxxxx>
Cc: Julien Grall <julien.grall@xxxxxxx>
Cc: Jonathan Davies <Jonathan.Davies@xxxxxxxxxx>
Cc: Marcus Granado <marcus.granado@xxxxxxxxxx>
---
Changes from v2:
- fixed typo in changelog.
Changed from v1:
- coding style fixes (removed some hard tabs);
- removed the null_vcpu->ndom up pointer, as suggested during review. It's
actually a pattern to have it in the schedulers, but in this one, it was
basically never used (only exception was NULL_VCPU_CHECK());
- removed the redundant pcpu field in null_vcpu, as suggested during review;
- factored common out code from null_vcpu_remove() and null_vcpu_migrate(),
as suggested during review;
- use dprintk() for logging (as we don't care who current is), but with
XENLOG_G_<xxx>, because we do want rate limiting;
- add a warning when a vCPU is put in the waitqueue;
- fixed null_vcpu_insert() locking, so that we hold change the value of
v->processor while holding the lock on the original pCPU, as it should
be done;
- triggering SCHEDULE_SOFTIRQ in schedule.c:schedule_cpu_switch() moved
to its own patch.
---
docs/misc/xen-command-line.markdown | 2
xen/common/Kconfig | 11
xen/common/Makefile | 1
xen/common/sched_null.c | 786 +++++++++++++++++++++++++++++++++++
xen/include/public/domctl.h | 1
5 files changed, 800 insertions(+), 1 deletion(-)
create mode 100644 xen/common/sched_null.c
diff --git a/docs/misc/xen-command-line.markdown
b/docs/misc/xen-command-line.markdown
index 5815d87..4c8fe2f 100644
--- a/docs/misc/xen-command-line.markdown
+++ b/docs/misc/xen-command-line.markdown
@@ -1423,7 +1423,7 @@ Map the HPET page as read only in Dom0. If disabled the
page will be mapped
with read and write permissions.
### sched
-> `= credit | credit2 | arinc653`
+> `= credit | credit2 | arinc653 | rtds | null`
> Default: `sched=credit`
diff --git a/xen/common/Kconfig b/xen/common/Kconfig
index afbc0e9..dc8e876 100644
--- a/xen/common/Kconfig
+++ b/xen/common/Kconfig
@@ -187,6 +187,14 @@ config SCHED_ARINC653
The ARINC653 scheduler is a hard real-time scheduler for single
cores, targeted for avionics, drones, and medical devices.
+config SCHED_NULL
+ bool "Null scheduler support (EXPERIMENTAL)"
+ default y
+ ---help---
+ The null scheduler is a static, zero overhead scheduler,
+ for when there always are less vCPUs than pCPUs, typically
+ in embedded or HPC scenarios.
+
choice
prompt "Default Scheduler?"
default SCHED_CREDIT_DEFAULT
@@ -199,6 +207,8 @@ choice
bool "RT Scheduler" if SCHED_RTDS
config SCHED_ARINC653_DEFAULT
bool "ARINC653 Scheduler" if SCHED_ARINC653
+ config SCHED_NULL_DEFAULT
+ bool "Null Scheduler" if SCHED_NULL
endchoice
config SCHED_DEFAULT
@@ -207,6 +217,7 @@ config SCHED_DEFAULT
default "credit2" if SCHED_CREDIT2_DEFAULT
default "rtds" if SCHED_RTDS_DEFAULT
default "arinc653" if SCHED_ARINC653_DEFAULT
+ default "null" if SCHED_NULL_DEFAULT
default "credit"
endmenu
diff --git a/xen/common/Makefile b/xen/common/Makefile
index 0fed30b..26c5a64 100644
--- a/xen/common/Makefile
+++ b/xen/common/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_SCHED_ARINC653) += sched_arinc653.o
obj-$(CONFIG_SCHED_CREDIT) += sched_credit.o
obj-$(CONFIG_SCHED_CREDIT2) += sched_credit2.o
obj-$(CONFIG_SCHED_RTDS) += sched_rt.o
+obj-$(CONFIG_SCHED_NULL) += sched_null.o
obj-y += schedule.o
obj-y += shutdown.o
obj-y += softirq.o
diff --git a/xen/common/sched_null.c b/xen/common/sched_null.c
new file mode 100644
index 0000000..c2c4182
--- /dev/null
+++ b/xen/common/sched_null.c
@@ -0,0 +1,786 @@
+/*
+ * xen/common/sched_null.c
+ *
+ * Copyright (c) 2017, Dario Faggioli, Citrix Ltd
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * The 'null' scheduler always choose to run, on each pCPU, either nothing
+ * (i.e., the pCPU stays idle) or always the same vCPU.
+ *
+ * It is aimed at supporting static scenarios, where there always are
+ * less vCPUs than pCPUs (and the vCPUs don't need to move among pCPUs
+ * for any reason) with the least possible overhead.
+ *
+ * Typical usecase are embedded applications, but also HPC, especially
+ * if the scheduler is used inside a cpupool.
+ */
+
+#include <xen/sched.h>
+#include <xen/sched-if.h>
+#include <xen/softirq.h>
+#include <xen/keyhandler.h>
+
+
+/*
+ * Locking:
+ * - Scheduler-lock (a.k.a. runqueue lock):
+ * + is per-pCPU;
+ * + serializes assignment and deassignment of vCPUs to a pCPU.
+ * - Private data lock (a.k.a. private scheduler lock):
+ * + is scheduler-wide;
+ * + serializes accesses to the list of domains in this scheduler.
+ * - Waitqueue lock:
+ * + is scheduler-wide;
+ * + serialize accesses to the list of vCPUs waiting to be assigned
+ * to pCPUs.
+ *
+ * Ordering is: private lock, runqueue lock, waitqueue lock. Or, OTOH,
+ * waitqueue lock nests inside runqueue lock which nests inside private
+ * lock. More specifically:
+ * + if we need both runqueue and private locks, we must acquire the
+ * private lock for first;
+ * + if we need both runqueue and waitqueue locks, we must acquire
+ * the runqueue lock for first;
+ * + if we need both private and waitqueue locks, we must acquire
+ * the private lock for first;
+ * + if we already own a runqueue lock, we must never acquire
+ * the private lock;
+ * + if we already own the waitqueue lock, we must never acquire
+ * the runqueue lock or the private lock.
+ */
+
+/*
+ * System-wide private data
+ */
+struct null_private {
+ spinlock_t lock; /* scheduler lock; nests inside cpupool_lock */
+ struct list_head ndom; /* Domains of this scheduler */
+ struct list_head waitq; /* vCPUs not assigned to any pCPU */
+ spinlock_t waitq_lock; /* serializes waitq; nests inside runq locks */
+ cpumask_t cpus_free; /* CPUs without a vCPU associated to them */
+};
+
+/*
+ * Physical CPU
+ */
+struct null_pcpu {
+ struct vcpu *vcpu;
+};
+DEFINE_PER_CPU(struct null_pcpu, npc);
+
+/*
+ * Virtual CPU
+ */
+struct null_vcpu {
+ struct list_head waitq_elem;
+ struct vcpu *vcpu;
+};
+
+/*
+ * Domain
+ */
+struct null_dom {
+ struct list_head ndom_elem;
+ struct domain *dom;
+};
+
+/*
+ * Accessor helpers functions
+ */
+static inline struct null_private *null_priv(const struct scheduler *ops)
+{
+ return ops->sched_data;
+}
+
+static inline struct null_vcpu *null_vcpu(const struct vcpu *v)
+{
+ return v->sched_priv;
+}
+
+static inline struct null_dom *null_dom(const struct domain *d)
+{
+ return d->sched_priv;
+}
+
+static int null_init(struct scheduler *ops)
+{
+ struct null_private *prv;
+
+ printk("Initializing null scheduler\n"
+ "WARNING: This is experimental software in development.\n"
+ "Use at your own risk.\n");
+
+ prv = xzalloc(struct null_private);
+ if ( prv == NULL )
+ return -ENOMEM;
+
+ spin_lock_init(&prv->lock);
+ spin_lock_init(&prv->waitq_lock);
+ INIT_LIST_HEAD(&prv->ndom);
+ INIT_LIST_HEAD(&prv->waitq);
+
+ ops->sched_data = prv;
+
+ return 0;
+}
+
+static void null_deinit(struct scheduler *ops)
+{
+ xfree(ops->sched_data);
+ ops->sched_data = NULL;
+}
+
+static void init_pdata(struct null_private *prv, unsigned int cpu)
+{
+ /* Mark the pCPU as free, and with no vCPU assigned */
+ cpumask_set_cpu(cpu, &prv->cpus_free);
+ per_cpu(npc, cpu).vcpu = NULL;
+}
+
+static void null_init_pdata(const struct scheduler *ops, void *pdata, int cpu)
+{
+ struct null_private *prv = null_priv(ops);
+ struct schedule_data *sd = &per_cpu(schedule_data, cpu);
+
+ /* alloc_pdata is not implemented, so we want this to be NULL. */
+ ASSERT(!pdata);
+
+ /*
+ * The scheduler lock points already to the default per-cpu spinlock,
+ * so there is no remapping to be done.
+ */
+ ASSERT(sd->schedule_lock == &sd->_lock && !spin_is_locked(&sd->_lock));
+
+ init_pdata(prv, cpu);
+}
+
+static void null_deinit_pdata(const struct scheduler *ops, void *pcpu, int cpu)
+{
+ struct null_private *prv = null_priv(ops);
+
+ /* alloc_pdata not implemented, so this must have stayed NULL */
+ ASSERT(!pcpu);
+
+ cpumask_clear_cpu(cpu, &prv->cpus_free);
+ per_cpu(npc, cpu).vcpu = NULL;
+}
+
+static void *null_alloc_vdata(const struct scheduler *ops,
+ struct vcpu *v, void *dd)
+{
+ struct null_vcpu *nvc;
+
+ nvc = xzalloc(struct null_vcpu);
+ if ( nvc == NULL )
+ return NULL;
+
+ INIT_LIST_HEAD(&nvc->waitq_elem);
+ nvc->vcpu = v;
+
+ SCHED_STAT_CRANK(vcpu_alloc);
+
+ return nvc;
+}
+
+static void null_free_vdata(const struct scheduler *ops, void *priv)
+{
+ struct null_vcpu *nvc = priv;
+
+ xfree(nvc);
+}
+
+static void * null_alloc_domdata(const struct scheduler *ops,
+ struct domain *d)
+{
+ struct null_private *prv = null_priv(ops);
+ struct null_dom *ndom;
+ unsigned long flags;
+
+ ndom = xzalloc(struct null_dom);
+ if ( ndom == NULL )
+ return NULL;
+
+ ndom->dom = d;
+
+ spin_lock_irqsave(&prv->lock, flags);
+ list_add_tail(&ndom->ndom_elem, &null_priv(ops)->ndom);
+ spin_unlock_irqrestore(&prv->lock, flags);
+
+ return (void*)ndom;
+}
+
+static void null_free_domdata(const struct scheduler *ops, void *data)
+{
+ unsigned long flags;
+ struct null_dom *ndom = data;
+ struct null_private *prv = null_priv(ops);
+
+ spin_lock_irqsave(&prv->lock, flags);
+ list_del_init(&ndom->ndom_elem);
+ spin_unlock_irqrestore(&prv->lock, flags);
+
+ xfree(data);
+}
+
+static int null_dom_init(const struct scheduler *ops, struct domain *d)
+{
+ struct null_dom *ndom;
+
+ if ( is_idle_domain(d) )
+ return 0;
+
+ ndom = null_alloc_domdata(ops, d);
+ if ( ndom == NULL )
+ return -ENOMEM;
+
+ d->sched_priv = ndom;
+
+ return 0;
+}
+static void null_dom_destroy(const struct scheduler *ops, struct domain *d)
+{
+ null_free_domdata(ops, null_dom(d));
+}
+
+/*
+ * vCPU to pCPU assignment and placement. This _only_ happens:
+ * - on insert,
+ * - on migrate.
+ *
+ * Insert occurs when a vCPU joins this scheduler for the first time
+ * (e.g., when the domain it's part of is moved to the scheduler's
+ * cpupool).
+ *
+ * Migration may be necessary if a pCPU (with a vCPU assigned to it)
+ * is removed from the scheduler's cpupool.
+ *
+ * So this is not part of any hot path.
+ */
+static unsigned int pick_cpu(struct null_private *prv, struct vcpu *v)
+{
+ unsigned int cpu = v->processor, new_cpu;
+ cpumask_t *cpus = cpupool_domain_cpumask(v->domain);
+
+ ASSERT(spin_is_locked(per_cpu(schedule_data, cpu).schedule_lock));
+
+ /*
+ * If our processor is free, or we are assigned to it, and it is
+ * also still valid, just go for it.
+ */
+ if ( likely((per_cpu(npc, cpu).vcpu == NULL || per_cpu(npc, cpu).vcpu == v)
+ && cpumask_test_cpu(cpu, cpus)) )
+ return cpu;
+
+ /* If not, just go for a valid free pCPU, if any */
+ cpumask_and(cpumask_scratch_cpu(cpu), &prv->cpus_free, cpus);
+ new_cpu = cpumask_first(cpumask_scratch_cpu(cpu));
+
+ if ( likely(new_cpu != nr_cpu_ids) )
+ return new_cpu;
+
+ /*
+ * If we didn't find any free pCPU, just pick any valid pcpu, even if
+ * it has another vCPU assigned. This will happen during shutdown and
+ * suspend/resume, but it may also happen during "normal operation", if
+ * all the pCPUs are busy.
+ *
+ * In fact, there must always be something sane in v->processor, or
+ * vcpu_schedule_lock() and friends won't work. This is not a problem,
+ * as we will actually assign the vCPU to the pCPU we return from here,
+ * only if the pCPU is free.
+ */
+ return cpumask_any(cpus);
+}
+
+static void vcpu_assign(struct null_private *prv, struct vcpu *v,
+ unsigned int cpu)
+{
+ per_cpu(npc, cpu).vcpu = v;
+ v->processor = cpu;
+ cpumask_clear_cpu(cpu, &prv->cpus_free);
+
+ dprintk(XENLOG_G_INFO, "%d <-- d%dv%d\n", cpu, v->domain->domain_id,
v->vcpu_id);
+}
+
+static void vcpu_deassign(struct null_private *prv, struct vcpu *v,
+ unsigned int cpu)
+{
+ per_cpu(npc, cpu).vcpu = NULL;
+ cpumask_set_cpu(cpu, &prv->cpus_free);
+
+ dprintk(XENLOG_G_INFO, "%d <-- NULL (d%dv%d)\n", cpu,
v->domain->domain_id, v->vcpu_id);
+}
+
+/* Change the scheduler of cpu to us (null). */
+static void null_switch_sched(struct scheduler *new_ops, unsigned int cpu,
+ void *pdata, void *vdata)
+{
+ struct schedule_data *sd = &per_cpu(schedule_data, cpu);
+ struct null_private *prv = null_priv(new_ops);
+ struct null_vcpu *nvc = vdata;
+
+ ASSERT(nvc && is_idle_vcpu(nvc->vcpu));
+
+ idle_vcpu[cpu]->sched_priv = vdata;
+
+ /*
+ * We are holding the runqueue lock already (it's been taken in
+ * schedule_cpu_switch()). It actually may or may not be the 'right'
+ * one for this cpu, but that is ok for preventing races.
+ */
+ ASSERT(!local_irq_is_enabled());
+
+ init_pdata(prv, cpu);
+
+ per_cpu(scheduler, cpu) = new_ops;
+ per_cpu(schedule_data, cpu).sched_priv = pdata;
+
+ /*
+ * (Re?)route the lock to the per pCPU lock as /last/ thing. In fact,
+ * if it is free (and it can be) we want that anyone that manages
+ * taking it, finds all the initializations we've done above in place.
+ */
+ smp_mb();
+ sd->schedule_lock = &sd->_lock;
+}
+
+static void null_vcpu_insert(const struct scheduler *ops, struct vcpu *v)
+{
+ struct null_private *prv = null_priv(ops);
+ struct null_vcpu *nvc = null_vcpu(v);
+ spinlock_t *lock;
+
+ ASSERT(!is_idle_vcpu(v));
+
+ lock = vcpu_schedule_lock_irq(v);
+ retry:
+
+ v->processor = pick_cpu(prv, v);
+
+ spin_unlock(lock);
+
+ lock = vcpu_schedule_lock(v);
+
+ /* If the pCPU is free, we assign v to it */
+ if ( likely(per_cpu(npc, v->processor).vcpu == NULL) )
+ {
+ /*
+ * Insert is followed by vcpu_wake(), so there's no need to poke
+ * the pcpu with the SCHEDULE_SOFTIRQ, as wake will do that.
+ */
+ vcpu_assign(prv, v, v->processor);
+ }
+ else if ( cpumask_intersects(&prv->cpus_free,
+ cpupool_domain_cpumask(v->domain)) )
+ {
+ /*
+ * If the pCPU is not free (e.g., because we raced with another
+ * insert or a migrate), but there are other free pCPUs, we can
+ * try to pick again.
+ */
+ goto retry;
+ }
+ else
+ {
+ /*
+ * If the pCPU is not free, and there aren't any (valid) others,
+ * we have no alternatives than to go into the waitqueue.
+ */
+ spin_lock(&prv->waitq_lock);
+ list_add_tail(&nvc->waitq_elem, &prv->waitq);
+ dprintk(XENLOG_G_WARNING, "WARNING: d%dv%d not assigned to any CPU!\n",
+ v->domain->domain_id, v->vcpu_id);
+ spin_unlock(&prv->waitq_lock);
+ }
+ spin_unlock_irq(lock);
+
+ SCHED_STAT_CRANK(vcpu_insert);
+}
+
+static void _vcpu_remove(struct null_private *prv, struct vcpu *v)
+{
+ unsigned int cpu = v->processor;
+ struct domain *d = v->domain;
+ struct null_vcpu *wvc;
+
+ ASSERT(list_empty(&null_vcpu(v)->waitq_elem));
+
+ spin_lock(&prv->waitq_lock);
+
+ /*
+ * If v is assigned to a pCPU, let's see if there is someone waiting.
+ * If yes, we assign it to cpu, in spite of v.
+ */
+ wvc = list_first_entry_or_null(&prv->waitq, struct null_vcpu, waitq_elem);
+ if ( wvc && cpumask_test_cpu(cpu, cpupool_domain_cpumask(d)) )
+ {
+ list_del_init(&wvc->waitq_elem);
+ vcpu_assign(prv, wvc->vcpu, cpu);
+ cpu_raise_softirq(cpu, SCHEDULE_SOFTIRQ);
+ }
+ else
+ {
+ vcpu_deassign(prv, v, cpu);
+ }
+
+ spin_unlock(&prv->waitq_lock);
+}
+
+static void null_vcpu_remove(const struct scheduler *ops, struct vcpu *v)
+{
+ struct null_private *prv = null_priv(ops);
+ struct null_vcpu *nvc = null_vcpu(v);
+ spinlock_t *lock;
+
+ ASSERT(!is_idle_vcpu(v));
+
+ lock = vcpu_schedule_lock_irq(v);
+
+ /* If v is in waitqueue, just get it out of there and bail */
+ if ( unlikely(!list_empty(&nvc->waitq_elem)) )
+ {
+ spin_lock(&prv->waitq_lock);
+ list_del_init(&nvc->waitq_elem);
+ spin_unlock(&prv->waitq_lock);
+
+ goto out;
+ }
+
+ ASSERT(per_cpu(npc, v->processor).vcpu == v);
+ ASSERT(!cpumask_test_cpu(v->processor, &prv->cpus_free));
+
+ _vcpu_remove(prv, v);
+
+ out:
+ vcpu_schedule_unlock_irq(lock, v);
+
+ SCHED_STAT_CRANK(vcpu_remove);
+}
+
+static void null_vcpu_wake(const struct scheduler *ops, struct vcpu *v)
+{
+ ASSERT(!is_idle_vcpu(v));
+
+ if ( unlikely(curr_on_cpu(v->processor) == v) )
+ {
+ SCHED_STAT_CRANK(vcpu_wake_running);
+ return;
+ }
+
+ if ( unlikely(!list_empty(&null_vcpu(v)->waitq_elem)) )
+ {
+ /* Not exactly "on runq", but close enough for reusing the counter */
+ SCHED_STAT_CRANK(vcpu_wake_onrunq);
+ return;
+ }
+
+ if ( likely(vcpu_runnable(v)) )
+ SCHED_STAT_CRANK(vcpu_wake_runnable);
+ else
+ SCHED_STAT_CRANK(vcpu_wake_not_runnable);
+
+ /* Note that we get here only for vCPUs assigned to a pCPU */
+ cpu_raise_softirq(v->processor, SCHEDULE_SOFTIRQ);
+}
+
+static void null_vcpu_sleep(const struct scheduler *ops, struct vcpu *v)
+{
+ ASSERT(!is_idle_vcpu(v));
+
+ /* If v is not assigned to a pCPU, or is not running, no need to bother */
+ if ( curr_on_cpu(v->processor) == v )
+ cpu_raise_softirq(v->processor, SCHEDULE_SOFTIRQ);
+
+ SCHED_STAT_CRANK(vcpu_sleep);
+}
+
+static int null_cpu_pick(const struct scheduler *ops, struct vcpu *v)
+{
+ ASSERT(!is_idle_vcpu(v));
+ return pick_cpu(null_priv(ops), v);
+}
+
+static void null_vcpu_migrate(const struct scheduler *ops, struct vcpu *v,
+ unsigned int new_cpu)
+{
+ struct null_private *prv = null_priv(ops);
+ struct null_vcpu *nvc = null_vcpu(v);
+
+ ASSERT(!is_idle_vcpu(v));
+
+ if ( v->processor == new_cpu )
+ return;
+
+ /*
+ * v is either assigned to a pCPU, or in the waitqueue.
+ *
+ * In the former case, the pCPU to which it was assigned would
+ * become free, and we, therefore, should check whether there is
+ * anyone in the waitqueue that can be assigned to it.
+ *
+ * In the latter, there is just nothing to do.
+ */
+ if ( likely(list_empty(&nvc->waitq_elem)) )
+ {
+ _vcpu_remove(prv, v);
+ SCHED_STAT_CRANK(migrate_running);
+ }
+ else
+ SCHED_STAT_CRANK(migrate_on_runq);
+
+ SCHED_STAT_CRANK(migrated);
+
+ /*
+ * Let's now consider new_cpu, which is where v is being sent. It can be
+ * either free, or have a vCPU already assigned to it.
+ *
+ * In the former case, we should assign v to it, and try to get it to run.
+ *
+ * In latter, all we can do is to park v in the waitqueue.
+ */
+ if ( per_cpu(npc, new_cpu).vcpu == NULL )
+ {
+ /* v might have been in the waitqueue, so remove it */
+ spin_lock(&prv->waitq_lock);
+ list_del_init(&nvc->waitq_elem);
+ spin_unlock(&prv->waitq_lock);
+
+ vcpu_assign(prv, v, new_cpu);
+ }
+ else
+ {
+ /* Put v in the waitqueue, if it wasn't there already */
+ spin_lock(&prv->waitq_lock);
+ if ( list_empty(&nvc->waitq_elem) )
+ {
+ list_add_tail(&nvc->waitq_elem, &prv->waitq);
+ dprintk(XENLOG_G_WARNING, "WARNING: d%dv%d not assigned to any
CPU!\n",
+ v->domain->domain_id, v->vcpu_id);
+ }
+ spin_unlock(&prv->waitq_lock);
+ }
+
+ /*
+ * Whatever all the above, we always at least override v->processor.
+ * This is especially important for shutdown or suspend/resume paths,
+ * when it is important to let our caller (cpu_disable_scheduler())
+ * know that the migration did happen, to the best of our possibilities,
+ * at least. In case of suspend, any temporary inconsistency caused
+ * by this, will be fixed-up during resume.
+ */
+ v->processor = new_cpu;
+}
+
+#ifndef NDEBUG
+static inline void null_vcpu_check(struct vcpu *v)
+{
+ struct null_vcpu * const nvc = null_vcpu(v);
+ struct null_dom * const ndom = null_dom(v->domain);
+
+ BUG_ON(nvc->vcpu != v);
+
+ if ( ndom )
+ BUG_ON(is_idle_vcpu(v));
+ else
+ BUG_ON(!is_idle_vcpu(v));
+
+ SCHED_STAT_CRANK(vcpu_check);
+}
+#define NULL_VCPU_CHECK(v) (null_vcpu_check(v))
+#else
+#define NULL_VCPU_CHECK(v)
+#endif
+
+
+/*
+ * The most simple scheduling function of all times! We either return:
+ * - the vCPU assigned to the pCPU, if there's one and it can run;
+ * - the idle vCPU, otherwise.
+ */
+static struct task_slice null_schedule(const struct scheduler *ops,
+ s_time_t now,
+ bool_t tasklet_work_scheduled)
+{
+ const unsigned int cpu = smp_processor_id();
+ struct null_private *prv = null_priv(ops);
+ struct null_vcpu *wvc;
+ struct task_slice ret;
+
+ SCHED_STAT_CRANK(schedule);
+ NULL_VCPU_CHECK(current);
+
+ ret.task = per_cpu(npc, cpu).vcpu;
+ ret.migrated = 0;
+ ret.time = -1;
+
+ /*
+ * We may be new in the cpupool, or just coming back online. In which
+ * case, there may be vCPUs in the waitqueue that we can assign to us
+ * and run.
+ */
+ if ( unlikely(ret.task == NULL) )
+ {
+ spin_lock(&prv->waitq_lock);
+ wvc = list_first_entry_or_null(&prv->waitq, struct null_vcpu,
waitq_elem);
+ if ( wvc )
+ {
+ vcpu_assign(prv, wvc->vcpu, cpu);
+ list_del_init(&wvc->waitq_elem);
+ ret.task = wvc->vcpu;
+ }
+ spin_unlock(&prv->waitq_lock);
+ }
+
+ if ( unlikely(tasklet_work_scheduled ||
+ ret.task == NULL ||
+ !vcpu_runnable(ret.task)) )
+ ret.task = idle_vcpu[cpu];
+
+ NULL_VCPU_CHECK(ret.task);
+ return ret;
+}
+
+static inline void dump_vcpu(struct null_private *prv, struct null_vcpu *nvc)
+{
+ printk("[%i.%i] pcpu=%d", nvc->vcpu->domain->domain_id,
+ nvc->vcpu->vcpu_id, list_empty(&nvc->waitq_elem) ?
+ nvc->vcpu->processor : -1);
+}
+
+static void null_dump_pcpu(const struct scheduler *ops, int cpu)
+{
+ struct null_private *prv = null_priv(ops);
+ struct null_vcpu *nvc;
+ spinlock_t *lock;
+ unsigned long flags;
+#define cpustr keyhandler_scratch
+
+ lock = pcpu_schedule_lock_irqsave(cpu, &flags);
+
+ cpumask_scnprintf(cpustr, sizeof(cpustr), per_cpu(cpu_sibling_mask, cpu));
+ printk("CPU[%02d] sibling=%s, ", cpu, cpustr);
+ cpumask_scnprintf(cpustr, sizeof(cpustr), per_cpu(cpu_core_mask, cpu));
+ printk("core=%s", cpustr);
+ if ( per_cpu(npc, cpu).vcpu != NULL )
+ printk(", vcpu=d%dv%d", per_cpu(npc, cpu).vcpu->domain->domain_id,
+ per_cpu(npc, cpu).vcpu->vcpu_id);
+ printk("\n");
+
+ /* current VCPU (nothing to say if that's the idle vcpu) */
+ nvc = null_vcpu(curr_on_cpu(cpu));
+ if ( nvc && !is_idle_vcpu(nvc->vcpu) )
+ {
+ printk("\trun: ");
+ dump_vcpu(prv, nvc);
+ printk("\n");
+ }
+
+ pcpu_schedule_unlock_irqrestore(lock, flags, cpu);
+#undef cpustr
+}
+
+static void null_dump(const struct scheduler *ops)
+{
+ struct null_private *prv = null_priv(ops);
+ struct list_head *iter;
+ unsigned long flags;
+ unsigned int loop;
+#define cpustr keyhandler_scratch
+
+ spin_lock_irqsave(&prv->lock, flags);
+
+ cpulist_scnprintf(cpustr, sizeof(cpustr), &prv->cpus_free);
+ printk("\tcpus_free = %s\n", cpustr);
+
+ printk("Domain info:\n");
+ loop = 0;
+ list_for_each( iter, &prv->ndom )
+ {
+ struct null_dom *ndom;
+ struct vcpu *v;
+
+ ndom = list_entry(iter, struct null_dom, ndom_elem);
+
+ printk("\tDomain: %d\n", ndom->dom->domain_id);
+ for_each_vcpu( ndom->dom, v )
+ {
+ struct null_vcpu * const nvc = null_vcpu(v);
+ spinlock_t *lock;
+
+ lock = vcpu_schedule_lock(nvc->vcpu);
+
+ printk("\t%3d: ", ++loop);
+ dump_vcpu(prv, nvc);
+ printk("\n");
+
+ vcpu_schedule_unlock(lock, nvc->vcpu);
+ }
+ }
+
+ printk("Waitqueue: ");
+ loop = 0;
+ spin_lock(&prv->waitq_lock);
+ list_for_each( iter, &prv->waitq )
+ {
+ struct null_vcpu *nvc = list_entry(iter, struct null_vcpu, waitq_elem);
+
+ if ( loop++ != 0 )
+ printk(", ");
+ if ( loop % 24 == 0 )
+ printk("\n\t");
+ printk("d%dv%d", nvc->vcpu->domain->domain_id, nvc->vcpu->vcpu_id);
+ }
+ printk("\n");
+ spin_unlock(&prv->waitq_lock);
+
+ spin_unlock_irqrestore(&prv->lock, flags);
+#undef cpustr
+}
+
+const struct scheduler sched_null_def = {
+ .name = "null Scheduler",
+ .opt_name = "null",
+ .sched_id = XEN_SCHEDULER_NULL,
+ .sched_data = NULL,
+
+ .init = null_init,
+ .deinit = null_deinit,
+ .init_pdata = null_init_pdata,
+ .switch_sched = null_switch_sched,
+ .deinit_pdata = null_deinit_pdata,
+
+ .alloc_vdata = null_alloc_vdata,
+ .free_vdata = null_free_vdata,
+ .alloc_domdata = null_alloc_domdata,
+ .free_domdata = null_free_domdata,
+
+ .init_domain = null_dom_init,
+ .destroy_domain = null_dom_destroy,
+
+ .insert_vcpu = null_vcpu_insert,
+ .remove_vcpu = null_vcpu_remove,
+
+ .wake = null_vcpu_wake,
+ .sleep = null_vcpu_sleep,
+ .pick_cpu = null_cpu_pick,
+ .migrate = null_vcpu_migrate,
+ .do_schedule = null_schedule,
+
+ .dump_cpu_state = null_dump_pcpu,
+ .dump_settings = null_dump,
+};
+
+REGISTER_SCHEDULER(sched_null_def);
diff --git a/xen/include/public/domctl.h b/xen/include/public/domctl.h
index 9e3ce21..477f8f3 100644
--- a/xen/include/public/domctl.h
+++ b/xen/include/public/domctl.h
@@ -346,6 +346,7 @@ DEFINE_XEN_GUEST_HANDLE(xen_domctl_max_vcpus_t);
#define XEN_SCHEDULER_CREDIT2 6
#define XEN_SCHEDULER_ARINC653 7
#define XEN_SCHEDULER_RTDS 8
+#define XEN_SCHEDULER_NULL 9
typedef struct xen_domctl_sched_credit {
uint16_t weight;
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |