Re: [Xen-devel] [PATCH v2 1/9] configure: change CONFIG_XEN_BACKEND to be a target property

[Greg Kurz <groug@xxxxxxxx>]

On Tue, 14 Mar 2017 13:23:09 -0700 (PDT)
Stefano Stabellini <sstabellini@xxxxxxxxxx> wrote:

> On Tue, 14 Mar 2017, Stefano Stabellini wrote:
> > On Tue, 14 Mar 2017, Paolo Bonzini wrote:  
> > > On 14/03/2017 00:55, Stefano Stabellini wrote:  
> > > > CONFIG_XEN_BACKEND is currently set when the host supports Xen,
> > > > regardless of the chosen targets. As a consequence, Xen backends can be
> > > > enabled even on targets that don't support Xen.
> > > > 
> > > > Fix the issue by setting CONFIG_XEN_BACKEND only for targets that
> > > > support Xen.
> > > > 
> > > > Signed-off-by: Stefano Stabellini <stefano@xxxxxxxxxxx>
> > > > CC: groug@xxxxxxxx
> > > > CC: groug@xxxxxxxx
> > > > CC: pbonzini@xxxxxxxxxx
> > > > CC: peter.maydell@xxxxxxxxxx
> > > > CC: rth@xxxxxxxxxxx
> > > > CC: stefanha@xxxxxxxxxx
> > > > ---
> > > >  configure | 2 +-
> > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > 
> > > > diff --git a/configure b/configure
> > > > index 6c21975..6d8f752 100755
> > > > --- a/configure
> > > > +++ b/configure
> > > > @@ -5442,7 +5442,6 @@ if test "$virglrenderer" = "yes" ; then
> > > >    echo "VIRGL_LIBS=$virgl_libs" >> $config_host_mak
> > > >  fi
> > > >  if test "$xen" = "yes" ; then
> > > > -  echo "CONFIG_XEN_BACKEND=y" >> $config_host_mak
> > > >    echo "CONFIG_XEN_CTRL_INTERFACE_VERSION=$xen_ctrl_version" >> 
> > > > $config_host_mak
> > > >    if test "$xen_pv_domain_build" = "yes" ; then
> > > >      echo "CONFIG_XEN_PV_DOMAIN_BUILD=y" >> $config_host_mak
> > > > @@ -6028,6 +6027,7 @@ case "$target_name" in
> > > >    i386|x86_64)
> > > >      if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then
> > > >        echo "CONFIG_XEN=y" >> $config_target_mak
> > > > +      echo "CONFIG_XEN_BACKEND=y" >> $config_target_mak
> > > >        if test "$xen_pci_passthrough" = yes; then
> > > >          echo "CONFIG_XEN_PCI_PASSTHROUGH=y" >> "$config_target_mak"
> > > >        fi
> > > >   
> > > 
> > > This messes up a bit the way xen_nic.o and friends are compiled, I
> > > think, because they are common-obj-y but they are only found when
> > > compiling in the target subdirectories.  So you end up building
> > > x86_64-softmmu/../hw/net/xen_nic.o
> > > 
> > > If you're unlucky, I believe this can lead to a link failure where a
> > > target is building xen_nic.o, while the other tries to link to a
> > > partially written object file.
> > > 
> > > I think the files should be changed from
> > > common-obj-$(CONFIG_XEN_BACKEND) to common-obj-$(CONFIG_XEN).
> > >
> > > The Makefile.objs change ensures that Xen backends are not enabled on
> > > targets that support Xen.  
> > 
> > Actually I thought about doing that instead of the configure change. It
> > makes sense to me.
> > 
> >   
> > > Then you add to Makefile:
> > > 
> > >  CONFIG_SOFTMMU := $(if $(filter %-softmmu,$(TARGET_DIRS)),y)
> > >  CONFIG_USER_ONLY := $(if $(filter %-user,$(TARGET_DIRS)),y)
> > > +CONFIG_XEN := $(CONFIG_XEN_BACKEND)
> > >  CONFIG_ALL=y
> > >  -include config-all-devices.mak
> > >  -include config-all-disas.mak
> > > 
> > > The Makefile change ensures that they are built before descending in the
> > > target-specific directories.  
> > 
> > But I don't understand this. Please correct me if I am wrong, but this
> > change looks like it would end up setting CONFIG_XEN every time that
> > CONFIG_XEN_BACKEND is set. Without the configure change at the top, it
> > would end up setting CONFIG_XEN whenever the host supports Xen, even for
> > non-x86 and non-ARM targets. What am I missing?  
> 
> FYI I made the following changes:
> 
> diff --git a/Makefile b/Makefile
> index 1c4c04f..b246138 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -26,6 +26,7 @@ endif
>  
>  CONFIG_SOFTMMU := $(if $(filter %-softmmu,$(TARGET_DIRS)),y)
>  CONFIG_USER_ONLY := $(if $(filter %-user,$(TARGET_DIRS)),y)
> +CONFIG_XEN := $(CONFIG_XEN_BACKEND)
>  CONFIG_ALL=y
>  -include config-all-devices.mak
>  -include config-all-disas.mak
> diff --git a/hw/block/Makefile.objs b/hw/block/Makefile.objs
> index d4c3ab7..e0ed980 100644
> --- a/hw/block/Makefile.objs
> +++ b/hw/block/Makefile.objs
> @@ -4,7 +4,7 @@ common-obj-$(CONFIG_SSI_M25P80) += m25p80.o
>  common-obj-$(CONFIG_NAND) += nand.o
>  common-obj-$(CONFIG_PFLASH_CFI01) += pflash_cfi01.o
>  common-obj-$(CONFIG_PFLASH_CFI02) += pflash_cfi02.o
> -common-obj-$(CONFIG_XEN_BACKEND) += xen_disk.o
> +common-obj-$(CONFIG_XEN) += xen_disk.o
>  common-obj-$(CONFIG_ECC) += ecc.o
>  common-obj-$(CONFIG_ONENAND) += onenand.o
>  common-obj-$(CONFIG_NVME_PCI) += nvme.o
> diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs
> index 6ea76fe..725fdc4 100644
> --- a/hw/char/Makefile.objs
> +++ b/hw/char/Makefile.objs
> @@ -7,7 +7,7 @@ common-obj-$(CONFIG_SERIAL_ISA) += serial-isa.o
>  common-obj-$(CONFIG_SERIAL_PCI) += serial-pci.o
>  common-obj-$(CONFIG_VIRTIO) += virtio-console.o
>  common-obj-$(CONFIG_XILINX) += xilinx_uartlite.o
> -common-obj-$(CONFIG_XEN_BACKEND) += xen_console.o
> +common-obj-$(CONFIG_XEN) += xen_console.o
>  common-obj-$(CONFIG_CADENCE) += cadence_uart.o
>  
>  obj-$(CONFIG_EXYNOS4) += exynos4210_uart.o
> diff --git a/hw/display/Makefile.objs b/hw/display/Makefile.objs
> index 063889b..3d02e8b 100644
> --- a/hw/display/Makefile.objs
> +++ b/hw/display/Makefile.objs
> @@ -5,7 +5,7 @@ common-obj-$(CONFIG_JAZZ_LED) += jazz_led.o
>  common-obj-$(CONFIG_PL110) += pl110.o
>  common-obj-$(CONFIG_SSD0303) += ssd0303.o
>  common-obj-$(CONFIG_SSD0323) += ssd0323.o
> -common-obj-$(CONFIG_XEN_BACKEND) += xenfb.o
> +common-obj-$(CONFIG_XEN) += xenfb.o
>  
>  common-obj-$(CONFIG_VGA_PCI) += vga-pci.o
>  common-obj-$(CONFIG_VGA_ISA) += vga-isa.o
> diff --git a/hw/net/Makefile.objs b/hw/net/Makefile.objs
> index 610ed3e..6a95d92 100644
> --- a/hw/net/Makefile.objs
> +++ b/hw/net/Makefile.objs
> @@ -1,5 +1,5 @@
>  common-obj-$(CONFIG_DP8393X) += dp8393x.o
> -common-obj-$(CONFIG_XEN_BACKEND) += xen_nic.o
> +common-obj-$(CONFIG_XEN) += xen_nic.o
>  
>  # PCI network cards
>  common-obj-$(CONFIG_NE2000_PCI) += ne2000.o
> diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs
> index 98b5c9d..5958be8 100644
> --- a/hw/usb/Makefile.objs
> +++ b/hw/usb/Makefile.objs
> @@ -40,5 +40,5 @@ common-obj-$(CONFIG_USB_REDIR) += redirect.o quirks.o
>  common-obj-y += $(patsubst %,host-%.o,$(HOST_USB))
>  
>  ifeq ($(CONFIG_USB_LIBUSB),y)
> -common-obj-$(CONFIG_XEN_BACKEND) += xen-usb.o
> +common-obj-$(CONFIG_XEN) += xen-usb.o
>  endif
> diff --git a/hw/xen/Makefile.objs b/hw/xen/Makefile.objs
> index 591cdc2..4be3ec9 100644
> --- a/hw/xen/Makefile.objs
> +++ b/hw/xen/Makefile.objs
> @@ -1,5 +1,5 @@
>  # xen backend driver support
> -common-obj-$(CONFIG_XEN_BACKEND) += xen_backend.o xen_devconfig.o xen_pvdev.o
> +common-obj-$(CONFIG_XEN) += xen_backend.o xen_devconfig.o xen_pvdev.o
>  
>  obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen-host-pci-device.o
>  obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pt.o xen_pt_config_init.o 
> xen_pt_graphics.o xen_pt_msi.o
> 
> I applied the rest of the series and did
> 
>   ./configure --enable-virtfs --enable-xen; make -j5
> 
> I got the following error:
> 
>   LINK    aarch64-softmmu/qemu-system-aarch64
> ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_alloc':

It looks like hw/9pfs/Makefile.objs may still have:

common-obj-$(CONFIG_XEN_BACKEND) += xen-9p-backend.o

instead of:

common-obj-$(CONFIG_XEN) += xen-9p-backend.o

... which builds like a charm.

Cheers.

--
Greg

> /local/qemu/hw/9pfs/xen-9p-backend.c:387: undefined reference to 
> `xenstore_write_be_str'
> /local/qemu/hw/9pfs/xen-9p-backend.c:388: undefined reference to 
> `xenstore_write_be_int'
> ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_connect':
> /local/qemu/hw/9pfs/xen-9p-backend.c:292: undefined reference to 
> `xenstore_read_fe_int'
> /local/qemu/hw/9pfs/xen-9p-backend.c:313: undefined reference to 
> `xenstore_read_fe_int'
> /local/qemu/hw/9pfs/xen-9p-backend.c:357: undefined reference to 
> `xen_pv_printf'
> /local/qemu/hw/9pfs/xen-9p-backend.c:307: undefined reference to 
> `xenstore_read_fe_int'
> /local/qemu/hw/9pfs/xen-9p-backend.c:362: undefined reference to 
> `xenstore_read_be_str'
> /local/qemu/hw/9pfs/xen-9p-backend.c:363: undefined reference to 
> `xenstore_read_be_str'
> /local/qemu/hw/9pfs/xen-9p-backend.c:366: undefined reference to 
> `xenstore_read_fe_str'
> /local/qemu/hw/9pfs/xen-9p-backend.c:353: undefined reference to 
> `xen_pv_printf'
> ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_alloc':
> /local/qemu/hw/9pfs/xen-9p-backend.c:389: undefined reference to 
> `xenstore_write_be_int'
> collect2: error: ld returned 1 exit status
> make[1]: *** [qemu-system-arm] Error 1
> make: *** [subdir-arm-softmmu] Error 2
> ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_alloc':
> /local/qemu/hw/9pfs/xen-9p-backend.c:387: undefined reference to 
> `xenstore_write_be_str'
> /local/qemu/hw/9pfs/xen-9p-backend.c:388: undefined reference to 
> `xenstore_write_be_int'
> ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_connect':
> /local/qemu/hw/9pfs/xen-9p-backend.c:292: undefined reference to 
> `xenstore_read_fe_int'
> /local/qemu/hw/9pfs/xen-9p-backend.c:313: undefined reference to 
> `xenstore_read_fe_int'
> /local/qemu/hw/9pfs/xen-9p-backend.c:357: undefined reference to 
> `xen_pv_printf'
> /local/qemu/hw/9pfs/xen-9p-backend.c:307: undefined reference to 
> `xenstore_read_fe_int'
> /local/qemu/hw/9pfs/xen-9p-backend.c:362: undefined reference to 
> `xenstore_read_be_str'
> /local/qemu/hw/9pfs/xen-9p-backend.c:363: undefined reference to 
> `xenstore_read_be_str'
> /local/qemu/hw/9pfs/xen-9p-backend.c:366: undefined reference to 
> `xenstore_read_fe_str'
> /local/qemu/hw/9pfs/xen-9p-backend.c:353: undefined reference to 
> `xen_pv_printf'
> ../hw/9pfs/xen-9p-backend.o: In function `xen_9pfs_alloc':
> /local/qemu/hw/9pfs/xen-9p-backend.c:389: undefined reference to 
> `xenstore_write_be_int'
> collect2: error: ld returned 1 exit status
> make[1]: *** [qemu-system-aarch64] Error 1
> make: *** [subdir-aarch64-softmmu] Error 2
>

Attachment: pgp1iXo31jklR.pgp
Description: OpenPGP digital signature

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel