|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v2] x86/shadow: Correct guest behaviour when creating PTEs above maxphysaddr
On 13/02/17 11:00, Andrew Cooper wrote:
> XSA-173 (c/s 8b1764833) introduces gfn_bits, and an upper limit which might be
> lower than the real maxphysaddr, to avoid overflowing the superpage shadow
> backpointer.
>
> However, plenty of hardware has a physical address width less that 44 bits,
> and the code added in shadow_domain_init() is a straight assignment. This
> causes gfn_bits to be increased beyond the physical address width on most
> Intel consumer hardware (typically a width of 39, which is the number reported
> to the guest via CPUID).
>
> If the guest intentionally creates a PTE referencing a physical address
> between 39 and 44 bits, the result should be #PF[RSVD] for using the virtual
> address. However, the shadow code accepts the PTE, shadows it, and the
> virtual address works normally.
>
> Introduce paging_max_paddr_bits() to calculate the largest guest physical
> address supportable by the paging infrastructure, and update
> recalculate_cpuid_policy() to take this into account when clamping the guests
> cpuid_policy to reality. Remove gfn_bits and rework its users in terms of a
> guests maxphysaddr.
>
> Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
> ---
> CC: Jan Beulich <JBeulich@xxxxxxxx>
> CC: Tim Deegan <tim@xxxxxxx>
> CC: George Dunlap <george.dunlap@xxxxxxxxxxxxx>
> CC: Jun Nakajima <jun.nakajima@xxxxxxxxx>
> CC: Kevin Tian <kevin.tian@xxxxxxxxx>
>
> v2:
> * Introduce paging_max_paddr_bits() rather than moving paging logic into
> recalculate_cpuid_policy().
> * Rewrite half of the commit message.
> ---
> xen/arch/x86/cpuid.c | 7 +++----
> xen/arch/x86/hvm/vmx/vvmx.c | 2 +-
> xen/arch/x86/mm/guest_walk.c | 3 ++-
> xen/arch/x86/mm/hap/hap.c | 2 --
> xen/arch/x86/mm/p2m.c | 3 ++-
> xen/arch/x86/mm/shadow/common.c | 10 ----------
> xen/arch/x86/mm/shadow/multi.c | 3 ++-
> xen/include/asm-x86/domain.h | 3 ---
> xen/include/asm-x86/paging.h | 16 ++++++++++++++++
> 9 files changed, 26 insertions(+), 23 deletions(-)
>
> diff --git a/xen/arch/x86/cpuid.c b/xen/arch/x86/cpuid.c
> index e0a387e..3378f7a 100644
> --- a/xen/arch/x86/cpuid.c
> +++ b/xen/arch/x86/cpuid.c
> @@ -6,6 +6,7 @@
> #include <asm/hvm/nestedhvm.h>
> #include <asm/hvm/svm/svm.h>
> #include <asm/hvm/vmx/vmcs.h>
> +#include <asm/paging.h>
> #include <asm/processor.h>
> #include <asm/xstate.h>
>
> @@ -502,11 +503,9 @@ void recalculate_cpuid_policy(struct domain *d)
>
> cpuid_featureset_to_policy(fs, p);
>
> - p->extd.maxphysaddr = min(p->extd.maxphysaddr, max->extd.maxphysaddr);
> p->extd.maxphysaddr = min_t(uint8_t, p->extd.maxphysaddr,
> - d->arch.paging.gfn_bits + PAGE_SHIFT);
> - p->extd.maxphysaddr = max_t(uint8_t, p->extd.maxphysaddr,
> - (p->basic.pae || p->basic.pse36) ? 36 : 32);
> + paging_max_paddr_bits(d));
> + p->extd.maxphysaddr = max_t(uint8_t, p->extd.maxphysaddr, 32);
>
> p->extd.maxlinaddr = p->extd.lm ? 48 : 32;
>
> diff --git a/xen/arch/x86/hvm/vmx/vvmx.c b/xen/arch/x86/hvm/vmx/vvmx.c
> index 9c61b5b..774a11f 100644
> --- a/xen/arch/x86/hvm/vmx/vvmx.c
> +++ b/xen/arch/x86/hvm/vmx/vvmx.c
> @@ -1381,7 +1381,7 @@ int nvmx_handle_vmxon(struct cpu_user_regs *regs)
> }
>
> if ( (gpa & ~PAGE_MASK) ||
> - (gpa >> (v->domain->arch.paging.gfn_bits + PAGE_SHIFT)) )
> + (gpa >> v->domain->arch.cpuid->extd.maxphysaddr) )
> {
> vmfail_invalid(regs);
> return X86EMUL_OKAY;
> diff --git a/xen/arch/x86/mm/guest_walk.c b/xen/arch/x86/mm/guest_walk.c
> index a67fd5a..5ad8cf6 100644
> --- a/xen/arch/x86/mm/guest_walk.c
> +++ b/xen/arch/x86/mm/guest_walk.c
> @@ -435,7 +435,8 @@ guest_walk_tables(struct vcpu *v, struct p2m_domain *p2m,
> /* If this guest has a restricted physical address space then the
> * target GFN must fit within it. */
> if ( !(rc & _PAGE_PRESENT)
> - && gfn_x(guest_l1e_get_gfn(gw->l1e)) >> d->arch.paging.gfn_bits )
> + && gfn_x(guest_l1e_get_gfn(gw->l1e)) >>
> + (d->arch.cpuid->extd.maxphysaddr - PAGE_SHIFT) )
This pattern, of taking a gfn and shifting it by
(cpuid->ectd.maxphysaddr-PAGE_SHIFT) to see if it's valid happens
several times; it seems like for both clarity and avoiding mistakes, it
would be better if it were put into a macro.
Everything else looks good to me. (No opinion on the other questions
raised so far.)
-George
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |