root@cknowsvr01:/home/diederik# dmesg [ 0.000000] Linux version 4.8.0-2-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 5.4.1 20161202 (Debian 5.4.1-4) ) #1 SMP Debian 4.8.15-2 (2017-01-04) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-2-amd64 root=UUID=0e49acdd-69d2-4c95-a5fc-3e1f4daa9b65 ro quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000079cfbfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000079cfc000-0x000000007b8c1fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007b8c2000-0x000000007b934fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007b935000-0x000000007bedffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007bee0000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000207fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: ASUSTeK COMPUTER INC. Z10PA-D8 Series/Z10PA-D8 Series, BIOS 3202 04/18/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x2080000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000080000000 mask 3FFF80000000 uncachable [ 0.000000] 1 base 038000000000 mask 3F8000000000 uncachable [ 0.000000] 2 base 0000B0000000 mask 3FFFF0000000 write-through [ 0.000000] 3 base 0000C0000000 mask 3FFFFFE00000 write-through [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] x2apic: enabled by BIOS, switching to x2apic ops [ 0.000000] e820: last_pfn = 0x79cfc max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fdba0-0x000fdbaf] mapped at [ffff9b16400fdba0] [ 0.000000] Base memory trampoline at [ffff9b1640098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x1ae533f000, 0x1ae533ffff] PGTABLE [ 0.000000] BRK [0x1ae5340000, 0x1ae5340fff] PGTABLE [ 0.000000] BRK [0x1ae5341000, 0x1ae5341fff] PGTABLE [ 0.000000] BRK [0x1ae5342000, 0x1ae5342fff] PGTABLE [ 0.000000] BRK [0x1ae5343000, 0x1ae5343fff] PGTABLE [ 0.000000] BRK [0x1ae5344000, 0x1ae5344fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3598f000-0x36cbefff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0580 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x000000007B8EA0B0 0000D4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000007B919410 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x000000007B8EA218 02F1F7 (v02 ALASKA A M I 01072009 INTL 20091013) [ 0.000000] ACPI: FACS 0x000000007BEDEF80 000040 [ 0.000000] ACPI: APIC 0x000000007B919520 000224 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000007B919748 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x000000007B919790 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000007B919830 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: EINJ 0x000000007B9347D0 000130 (v01 ALASKA A M I 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 0x000000007B9198C8 000042 (v01 ALASKA A M I 01072009 00000000) [ 0.000000] ACPI: HPET 0x000000007B919910 000038 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: MSCT 0x000000007B919948 000090 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: SLIT 0x000000007B9199D8 000030 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: SRAT 0x000000007B919A08 001158 (v03 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: WDDT 0x000000007B91AB60 000040 (v01 ALASKA A M I 00000000 INTL 20091013) [ 0.000000] ACPI: SSDT 0x000000007B91ABA0 016FB3 (v02 ALASKA PmMgt 00000001 INTL 20120913) [ 0.000000] ACPI: NITR 0x000000007B931B58 000071 (v02 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: SPMI 0x000000007B931BD0 000041 (v05 ALASKA A M I 00000000 AMI. 00000000) [ 0.000000] ACPI: SSDT 0x000000007B931C18 002652 (v02 ALASKA SpsNm 00000002 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000007B934270 000064 (v02 ALASKA SpsNvs 00000002 INTL 20120913) [ 0.000000] ACPI: PRAD 0x000000007B9342D8 000102 (v02 ALASKA A M I 00000002 INTL 20120913) [ 0.000000] ACPI: DMAR 0x000000007B9343E0 0000E8 (v01 ALASKA A M I 00000001 INTL 20091013) [ 0.000000] ACPI: HEST 0x000000007B9344C8 0000A8 (v01 ALASKA A M I 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 0x000000007B934570 000030 (v01 ALASKA A M I 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 0x000000007B9345A0 000230 (v01 ALASKA A M I 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Setting APIC routing to cluster x2apic. [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x08 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0a -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0c -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0e -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x10 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x14 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x16 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x18 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x1a -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x1c -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x1e -> Node 1 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x07 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x09 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0b -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0d -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0f -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x11 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x15 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x17 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x19 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x1b -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x1d -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x1f -> Node 1 [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x107fffffff] [ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x1080000000-0x207fffffff] [ 0.000000] NUMA: Initialized distance table, cnt=2 [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x107fffffff] -> [mem 0x00000000-0x107fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x107fffb000-0x107fffffff] [ 0.000000] NODE_DATA(1) allocated [mem 0x207fffa000-0x207fffefff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000207fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000079cfbfff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000107fffffff] [ 0.000000] node 1: [mem 0x0000001080000000-0x000000207fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000107fffffff] [ 0.000000] On node 0 totalpages: 16751769 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7732 pages used for memmap [ 0.000000] DMA32 zone: 494844 pages, LIFO batch:31 [ 0.000000] Normal zone: 253952 pages used for memmap [ 0.000000] Normal zone: 16252928 pages, LIFO batch:31 [ 0.000000] Initmem setup node 1 [mem 0x0000001080000000-0x000000207fffffff] [ 0.000000] On node 1 totalpages: 16777216 [ 0.000000] Normal zone: 262144 pages used for memmap [ 0.000000] Normal zone: 16777216 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 32 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x79cfc000-0x7b8c1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b8c2000-0x7b934fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b935000-0x7bedffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7bee0000-0x8fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32 nr_node_ids:2 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff9b267fa00000 s103384 r8192 d31784 u262144 [ 0.000000] pcpu-alloc: s103384 r8192 d31784 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 16 17 18 19 20 21 22 23 [ 0.000000] pcpu-alloc: [1] 08 09 10 11 12 13 14 15 [1] 24 25 26 27 28 29 30 31 [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 33005072 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-2-amd64 root=UUID=0e49acdd-69d2-4c95-a5fc-3e1f4daa9b65 ro quiet [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 126976 bytes [ 0.000000] log_buf_len min size: 131072 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 116060(88%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 131914220K/134115940K available (6070K kernel code, 1124K rwdata, 2808K rodata, 1360K init, 800K bss, 2201720K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=32. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=32 [ 0.000000] NR_IRQS:33024 nr_irqs:1496 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2095.297 MHz processor [ 0.000033] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.59 BogoMIPS (lpj=8381188) [ 0.000035] pid_max: default: 32768 minimum: 301 [ 0.000076] ACPI: Core revision 20160422 [ 0.070819] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.070940] Security Framework initialized [ 0.070941] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.070947] AppArmor: AppArmor disabled by boot time parameter [ 0.077514] Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes) [ 0.103465] Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes) [ 0.114964] Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.115079] Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.116139] CPU: Physical Processor ID: 0 [ 0.116140] CPU: Processor Core ID: 0 [ 0.116145] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.116145] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.116150] mce: CPU supports 22 MCE banks [ 0.116167] CPU0: Thermal monitoring enabled (TM1) [ 0.116213] process: using mwait in idle threads [ 0.116217] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.116218] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.117155] Freeing SMP alternatives memory: 24K (ffffffff8aa6f000 - ffffffff8aa75000) [ 0.119201] ftrace: allocating 24736 entries in 97 pages [ 0.131451] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.131452] smpboot: APIC(10) Converting physical 1 to logical package 1 [ 0.131454] smpboot: Max logical packages: 4 [ 0.131462] DMAR: Host address width 46 [ 0.131463] DMAR: DRHD base: 0x000000fbffc000 flags: 0x0 [ 0.131473] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df [ 0.131474] DMAR: DRHD base: 0x000000c7ffc000 flags: 0x1 [ 0.131479] DMAR: dmar1: reg_base_addr c7ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df [ 0.131480] DMAR: RMRR base: 0x0000007db86000 end: 0x0000007db95fff [ 0.131481] DMAR: ATSR flags: 0x0 [ 0.131482] DMAR: RHSA base: 0x000000c7ffc000 proximity domain: 0x0 [ 0.131483] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x1 [ 0.131485] DMAR-IR: IOAPIC id 3 under DRHD base 0xfbffc000 IOMMU 0 [ 0.131486] DMAR-IR: IOAPIC id 1 under DRHD base 0xc7ffc000 IOMMU 1 [ 0.131487] DMAR-IR: IOAPIC id 2 under DRHD base 0xc7ffc000 IOMMU 1 [ 0.131487] DMAR-IR: HPET id 0 under DRHD base 0xc7ffc000 [ 0.131489] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.132319] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.133000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.172697] TSC deadline timer enabled [ 0.172703] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz (family: 0x6, model: 0x4f, stepping: 0x1) [ 0.172707] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.172734] ... version: 3 [ 0.172735] ... bit width: 48 [ 0.172735] ... generic registers: 4 [ 0.172736] ... value mask: 0000ffffffffffff [ 0.172736] ... max period: 00007fffffffffff [ 0.172737] ... fixed-purpose events: 3 [ 0.172737] ... event mask: 000000070000000f [ 0.174604] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.174731] x86: Booting SMP configuration: [ 0.174732] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.735172] .... node #1, CPUs: #8 #9 #10 #11 #12 #13 #14 #15 [ 1.395526] .... node #0, CPUs: #16 #17 #18 #19 #20 #21 #22 #23 [ 2.035969] .... node #1, CPUs: #24 #25 #26 #27 #28 #29 #30 #31 [ 2.676232] x86: Booted up 2 nodes, 32 CPUs [ 2.676234] smpboot: Total of 32 processors activated (134172.29 BogoMIPS) [ 2.744263] devtmpfs: initialized [ 2.744446] x86/mm: Memory block size: 2048MB [ 2.747401] PM: Registering ACPI NVS region [mem 0x7b935000-0x7bedffff] (5943296 bytes) [ 2.747741] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 2.747921] pinctrl core: initialized pinctrl subsystem [ 2.749256] NET: Registered protocol family 16 [ 2.768882] cpuidle: using governor ladder [ 2.804914] cpuidle: using governor menu [ 2.805051] ACPI: bus type PCI registered [ 2.805052] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 2.805186] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 2.805188] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 2.805205] PCI: Using configuration type 1 for base access [ 2.853184] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 2.853185] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.853962] ACPI: Added _OSI(Module Device) [ 2.853963] ACPI: Added _OSI(Processor Device) [ 2.853964] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.853964] ACPI: Added _OSI(Processor Aggregator Device) [ 2.871115] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 2.926429] ACPI: Dynamic OEM Table Load: [ 2.926431] ACPI: PRAD 0x0000000000000000 000102 (v02 ALASKA A M I 00000002 INTL 20120913) [ 2.963168] ACPI: Interpreter enabled [ 2.963185] ACPI: (supports S0 S4 S5) [ 2.963186] ACPI: Using IOAPIC for interrupt routing [ 2.963277] HEST: Table parsing has been initialized. [ 2.963279] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 3.019168] ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff]) [ 3.019172] acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 3.022027] acpi PNP0A03:02: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 3.022084] PCI host bridge to bus 0000:ff [ 3.022086] pci_bus 0000:ff: root bus resource [bus ff] [ 3.022095] pci 0000:ff:08.0: [8086:6f80] type 00 class 0x088000 [ 3.022158] pci 0000:ff:08.2: [8086:6f32] type 00 class 0x110100 [ 3.022214] pci 0000:ff:08.3: [8086:6f83] type 00 class 0x088000 [ 3.022278] pci 0000:ff:09.0: [8086:6f90] type 00 class 0x088000 [ 3.022330] pci 0000:ff:09.2: [8086:6f33] type 00 class 0x110100 [ 3.022387] pci 0000:ff:09.3: [8086:6f93] type 00 class 0x088000 [ 3.022448] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 3.022498] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 3.022549] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 3.022598] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 3.022648] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 3.022697] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 3.022746] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 3.022794] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 3.022842] pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000 [ 3.022890] pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000 [ 3.022938] pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000 [ 3.022987] pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000 [ 3.023037] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 3.023087] pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000 [ 3.023137] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 3.023187] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 3.023237] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 3.023289] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 3.023342] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 3.023396] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 3.023444] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 3.023496] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 3.023546] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 3.023586] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 3.023642] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 3.023730] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 3.023813] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 3.023900] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 3.023987] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 3.024072] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 3.024139] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 3.024192] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 3.024247] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 3.024308] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 3.024368] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 3.024429] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 3.024487] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 3.024540] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 3.024592] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 3.024644] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 3.024697] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 3.024768] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 3.024832] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 3.024894] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 3.024962] pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000 [ 3.025023] pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000 [ 3.025078] pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000 [ 3.025130] pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000 [ 3.025192] pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000 [ 3.025243] pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000 [ 3.025297] pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000 [ 3.025349] pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000 [ 3.025410] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 3.025461] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 3.025513] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 3.025565] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 3.025605] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 3.025660] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 3.025713] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 3.025832] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f]) [ 3.025835] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 3.026969] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 3.027022] PCI host bridge to bus 0000:7f [ 3.027023] pci_bus 0000:7f: root bus resource [bus 7f] [ 3.027032] pci 0000:7f:08.0: [8086:6f80] type 00 class 0x088000 [ 3.027090] pci 0000:7f:08.2: [8086:6f32] type 00 class 0x110100 [ 3.027152] pci 0000:7f:08.3: [8086:6f83] type 00 class 0x088000 [ 3.027221] pci 0000:7f:09.0: [8086:6f90] type 00 class 0x088000 [ 3.027277] pci 0000:7f:09.2: [8086:6f33] type 00 class 0x110100 [ 3.027336] pci 0000:7f:09.3: [8086:6f93] type 00 class 0x088000 [ 3.027403] pci 0000:7f:0b.0: [8086:6f81] type 00 class 0x088000 [ 3.027456] pci 0000:7f:0b.1: [8086:6f36] type 00 class 0x110100 [ 3.027510] pci 0000:7f:0b.2: [8086:6f37] type 00 class 0x110100 [ 3.027562] pci 0000:7f:0b.3: [8086:6f76] type 00 class 0x088000 [ 3.027617] pci 0000:7f:0c.0: [8086:6fe0] type 00 class 0x088000 [ 3.027670] pci 0000:7f:0c.1: [8086:6fe1] type 00 class 0x088000 [ 3.027722] pci 0000:7f:0c.2: [8086:6fe2] type 00 class 0x088000 [ 3.027779] pci 0000:7f:0c.3: [8086:6fe3] type 00 class 0x088000 [ 3.027830] pci 0000:7f:0c.4: [8086:6fe4] type 00 class 0x088000 [ 3.027882] pci 0000:7f:0c.5: [8086:6fe5] type 00 class 0x088000 [ 3.027934] pci 0000:7f:0c.6: [8086:6fe6] type 00 class 0x088000 [ 3.027985] pci 0000:7f:0c.7: [8086:6fe7] type 00 class 0x088000 [ 3.028039] pci 0000:7f:0f.0: [8086:6ff8] type 00 class 0x088000 [ 3.028090] pci 0000:7f:0f.1: [8086:6ff9] type 00 class 0x088000 [ 3.028144] pci 0000:7f:0f.4: [8086:6ffc] type 00 class 0x088000 [ 3.028197] pci 0000:7f:0f.5: [8086:6ffd] type 00 class 0x088000 [ 3.028250] pci 0000:7f:0f.6: [8086:6ffe] type 00 class 0x088000 [ 3.028304] pci 0000:7f:10.0: [8086:6f1d] type 00 class 0x088000 [ 3.028358] pci 0000:7f:10.1: [8086:6f34] type 00 class 0x110100 [ 3.028413] pci 0000:7f:10.5: [8086:6f1e] type 00 class 0x088000 [ 3.028466] pci 0000:7f:10.6: [8086:6f7d] type 00 class 0x110100 [ 3.028518] pci 0000:7f:10.7: [8086:6f1f] type 00 class 0x088000 [ 3.028571] pci 0000:7f:12.0: [8086:6fa0] type 00 class 0x088000 [ 3.028612] pci 0000:7f:12.1: [8086:6f30] type 00 class 0x110100 [ 3.028672] pci 0000:7f:13.0: [8086:6fa8] type 00 class 0x088000 [ 3.028751] pci 0000:7f:13.1: [8086:6f71] type 00 class 0x088000 [ 3.028814] pci 0000:7f:13.2: [8086:6faa] type 00 class 0x088000 [ 3.028878] pci 0000:7f:13.3: [8086:6fab] type 00 class 0x088000 [ 3.028943] pci 0000:7f:13.4: [8086:6fac] type 00 class 0x088000 [ 3.029006] pci 0000:7f:13.5: [8086:6fad] type 00 class 0x088000 [ 3.029068] pci 0000:7f:13.6: [8086:6fae] type 00 class 0x088000 [ 3.029127] pci 0000:7f:13.7: [8086:6faf] type 00 class 0x088000 [ 3.029184] pci 0000:7f:14.0: [8086:6fb0] type 00 class 0x088000 [ 3.029249] pci 0000:7f:14.1: [8086:6fb1] type 00 class 0x088000 [ 3.029314] pci 0000:7f:14.2: [8086:6fb2] type 00 class 0x088000 [ 3.029379] pci 0000:7f:14.3: [8086:6fb3] type 00 class 0x088000 [ 3.029442] pci 0000:7f:14.4: [8086:6fbc] type 00 class 0x088000 [ 3.029499] pci 0000:7f:14.5: [8086:6fbd] type 00 class 0x088000 [ 3.029557] pci 0000:7f:14.6: [8086:6fbe] type 00 class 0x088000 [ 3.029613] pci 0000:7f:14.7: [8086:6fbf] type 00 class 0x088000 [ 3.029670] pci 0000:7f:15.0: [8086:6fb4] type 00 class 0x088000 [ 3.029735] pci 0000:7f:15.1: [8086:6fb5] type 00 class 0x088000 [ 3.029801] pci 0000:7f:15.2: [8086:6fb6] type 00 class 0x088000 [ 3.029866] pci 0000:7f:15.3: [8086:6fb7] type 00 class 0x088000 [ 3.029936] pci 0000:7f:16.0: [8086:6f68] type 00 class 0x088000 [ 3.030002] pci 0000:7f:16.6: [8086:6f6e] type 00 class 0x088000 [ 3.030058] pci 0000:7f:16.7: [8086:6f6f] type 00 class 0x088000 [ 3.030115] pci 0000:7f:17.0: [8086:6fd0] type 00 class 0x088000 [ 3.030178] pci 0000:7f:17.4: [8086:6fb8] type 00 class 0x088000 [ 3.030235] pci 0000:7f:17.5: [8086:6fb9] type 00 class 0x088000 [ 3.030291] pci 0000:7f:17.6: [8086:6fba] type 00 class 0x088000 [ 3.030345] pci 0000:7f:17.7: [8086:6fbb] type 00 class 0x088000 [ 3.030409] pci 0000:7f:1e.0: [8086:6f98] type 00 class 0x088000 [ 3.030462] pci 0000:7f:1e.1: [8086:6f99] type 00 class 0x088000 [ 3.030518] pci 0000:7f:1e.2: [8086:6f9a] type 00 class 0x088000 [ 3.030572] pci 0000:7f:1e.3: [8086:6fc0] type 00 class 0x088000 [ 3.030615] pci 0000:7f:1e.4: [8086:6f9c] type 00 class 0x088000 [ 3.030674] pci 0000:7f:1f.0: [8086:6f88] type 00 class 0x088000 [ 3.030733] pci 0000:7f:1f.2: [8086:6f8a] type 00 class 0x088000 [ 3.042990] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 3.042994] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 3.044164] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 3.044549] PCI host bridge to bus 0000:00 [ 3.044551] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 3.044552] pci_bus 0000:00: root bus resource [io 0x1000-0xbfff window] [ 3.044554] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 3.044555] pci_bus 0000:00: root bus resource [mem 0x90000000-0xc7ffbfff window] [ 3.044556] pci_bus 0000:00: root bus resource [bus 00-7e] [ 3.044565] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 3.044734] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 3.044783] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 3.044867] pci 0000:00:01.0: System wakeup disabled by ACPI [ 3.044912] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 3.044960] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 3.045041] pci 0000:00:02.0: System wakeup disabled by ACPI [ 3.045085] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 3.045133] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 3.045215] pci 0000:00:03.0: System wakeup disabled by ACPI [ 3.045256] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 3.045391] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 3.045541] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 3.045674] pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020 [ 3.045682] pci 0000:00:05.4: reg 0x10: [mem 0xc7f19000-0xc7f19fff] [ 3.045840] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000 [ 3.046059] pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601 [ 3.046075] pci 0000:00:11.4: reg 0x10: [io 0xb110-0xb117] [ 3.046083] pci 0000:00:11.4: reg 0x14: [io 0xb100-0xb103] [ 3.046091] pci 0000:00:11.4: reg 0x18: [io 0xb0f0-0xb0f7] [ 3.046099] pci 0000:00:11.4: reg 0x1c: [io 0xb0e0-0xb0e3] [ 3.046107] pci 0000:00:11.4: reg 0x20: [io 0xb020-0xb03f] [ 3.046115] pci 0000:00:11.4: reg 0x24: [mem 0xc7f18000-0xc7f187ff] [ 3.046159] pci 0000:00:11.4: PME# supported from D3hot [ 3.046285] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330 [ 3.046303] pci 0000:00:14.0: reg 0x10: [mem 0xc7f00000-0xc7f0ffff 64bit] [ 3.046365] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 3.046461] pci 0000:00:14.0: System wakeup disabled by ACPI [ 3.046509] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000 [ 3.046527] pci 0000:00:16.0: reg 0x10: [mem 0xc7f17000-0xc7f1700f 64bit] [ 3.046590] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 3.046712] pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000 [ 3.046729] pci 0000:00:16.1: reg 0x10: [mem 0xc7f16000-0xc7f1600f 64bit] [ 3.046793] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 3.046927] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320 [ 3.046944] pci 0000:00:1a.0: reg 0x10: [mem 0xc7f14000-0xc7f143ff] [ 3.047029] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 3.047127] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 3.047181] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400 [ 3.047255] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 3.047335] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 3.047388] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400 [ 3.047461] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 3.047542] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 3.047592] pci 0000:00:1c.5: [8086:8d1a] type 01 class 0x060400 [ 3.047666] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 3.047746] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 3.047800] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320 [ 3.047817] pci 0000:00:1d.0: reg 0x10: [mem 0xc7f13000-0xc7f133ff] [ 3.047903] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 3.047999] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 3.048055] pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100 [ 3.048264] pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601 [ 3.048278] pci 0000:00:1f.2: reg 0x10: [io 0xb070-0xb077] [ 3.048285] pci 0000:00:1f.2: reg 0x14: [io 0xb060-0xb063] [ 3.048292] pci 0000:00:1f.2: reg 0x18: [io 0xb050-0xb057] [ 3.048299] pci 0000:00:1f.2: reg 0x1c: [io 0xb040-0xb043] [ 3.048306] pci 0000:00:1f.2: reg 0x20: [io 0xb000-0xb01f] [ 3.048313] pci 0000:00:1f.2: reg 0x24: [mem 0xc7f12000-0xc7f127ff] [ 3.048350] pci 0000:00:1f.2: PME# supported from D3hot [ 3.048473] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500 [ 3.048487] pci 0000:00:1f.3: reg 0x10: [mem 0xc7f11000-0xc7f110ff 64bit] [ 3.048507] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f] [ 3.048828] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.049033] pci 0000:02:00.0: [1002:67ef] type 00 class 0x030000 [ 3.049048] pci 0000:02:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref] [ 3.049058] pci 0000:02:00.0: reg 0x18: [mem 0xc0000000-0xc01fffff 64bit pref] [ 3.049064] pci 0000:02:00.0: reg 0x20: [io 0xa000-0xa0ff] [ 3.049071] pci 0000:02:00.0: reg 0x24: [mem 0xc7e00000-0xc7e3ffff] [ 3.049077] pci 0000:02:00.0: reg 0x30: [mem 0xc7e40000-0xc7e5ffff pref] [ 3.049136] pci 0000:02:00.0: supports D1 D2 [ 3.049137] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 3.049237] pci 0000:02:00.1: [1002:aae0] type 00 class 0x040300 [ 3.049250] pci 0000:02:00.1: reg 0x10: [mem 0xc7e60000-0xc7e63fff 64bit] [ 3.049324] pci 0000:02:00.1: supports D1 D2 [ 3.064757] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.064760] pci 0000:00:02.0: bridge window [io 0xa000-0xafff] [ 3.064763] pci 0000:00:02.0: bridge window [mem 0xc7e00000-0xc7efffff] [ 3.064768] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref] [ 3.065040] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.065114] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 3.065233] pci 0000:05:00.0: [8086:1533] type 00 class 0x020000 [ 3.065258] pci 0000:05:00.0: reg 0x10: [mem 0xc7d00000-0xc7d7ffff] [ 3.065286] pci 0000:05:00.0: reg 0x18: [io 0x9000-0x901f] [ 3.065301] pci 0000:05:00.0: reg 0x1c: [mem 0xc7d80000-0xc7d83fff] [ 3.065461] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 3.080775] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 3.080780] pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff] [ 3.080784] pci 0000:00:1c.4: bridge window [mem 0xc7d00000-0xc7dfffff] [ 3.080910] pci 0000:06:00.0: [8086:1533] type 00 class 0x020000 [ 3.080935] pci 0000:06:00.0: reg 0x10: [mem 0xc7c00000-0xc7c7ffff] [ 3.080963] pci 0000:06:00.0: reg 0x18: [io 0x8000-0x801f] [ 3.080978] pci 0000:06:00.0: reg 0x1c: [mem 0xc7c80000-0xc7c83fff] [ 3.081123] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 3.096794] pci 0000:00:1c.5: PCI bridge to [bus 06] [ 3.096798] pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff] [ 3.096803] pci 0000:00:1c.5: bridge window [mem 0xc7c00000-0xc7cfffff] [ 3.096855] pci_bus 0000:00: on NUMA node 0 [ 3.098095] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe]) [ 3.098098] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 3.098403] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 3.098611] PCI host bridge to bus 0000:80 [ 3.098613] pci_bus 0000:80: root bus resource [io 0xc000-0xffff window] [ 3.098614] pci_bus 0000:80: root bus resource [mem 0xc8000000-0xfbffbfff window] [ 3.098615] pci_bus 0000:80: root bus resource [bus 80-fe] [ 3.098624] pci 0000:80:05.0: [8086:6f28] type 00 class 0x088000 [ 3.098727] pci 0000:80:05.1: [8086:6f29] type 00 class 0x088000 [ 3.098839] pci 0000:80:05.2: [8086:6f2a] type 00 class 0x088000 [ 3.098935] pci 0000:80:05.4: [8086:6f2c] type 00 class 0x080020 [ 3.098942] pci 0000:80:05.4: reg 0x10: [mem 0xfbf00000-0xfbf00fff] [ 3.099050] pci_bus 0000:80: on NUMA node 1 [ 3.099433] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 12 14 15) [ 3.099530] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 *7 9 12 14 15) [ 3.099621] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *10 12 14 15) [ 3.099702] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 *11 12 14 15) [ 3.099786] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 3.099876] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 3.099965] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 3.100053] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 3.100236] ACPI: Enabled 1 GPEs in block 00 to 3F [ 3.100438] vgaarb: setting as boot device: PCI:0000:02:00.0 [ 3.100439] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 3.100441] vgaarb: loaded [ 3.100441] vgaarb: bridge control possible 0000:02:00.0 [ 3.100553] PCI: Using ACPI for IRQ routing [ 3.104985] PCI: pci_cache_line_size set to 64 bytes [ 3.105202] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 3.105204] e820: reserve RAM buffer [mem 0x79cfc000-0x7bffffff] [ 3.105439] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.105444] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.107574] clocksource: Switched to clocksource hpet [ 3.116127] VFS: Disk quotas dquot_6.6.0 [ 3.116204] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.116369] pnp: PnP ACPI init [ 3.116892] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 3.117084] system 00:01: [io 0x0500-0x057f] has been reserved [ 3.117086] system 00:01: [io 0x0400-0x047f] has been reserved [ 3.117088] system 00:01: [io 0x0580-0x059f] has been reserved [ 3.117089] system 00:01: [io 0x0600-0x061f] has been reserved [ 3.117091] system 00:01: [io 0x0880-0x0883] has been reserved [ 3.117092] system 00:01: [io 0x0800-0x081f] has been reserved [ 3.117094] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved [ 3.117096] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 3.117097] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 3.117099] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 3.117100] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 3.117101] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 3.117102] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 3.117105] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.117311] system 00:02: [io 0x0290-0x029f] has been reserved [ 3.117313] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.117665] pnp 00:03: [dma 0 disabled] [ 3.117725] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 3.118034] pnp 00:04: [dma 0 disabled] [ 3.118081] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 3.119101] pnp: PnP ACPI: found 5 devices [ 3.126614] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.126714] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 3.126717] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 3.126719] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 [ 3.126750] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 3.126752] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 3.126754] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 3.126755] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 3.126757] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 3.126759] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 3.126762] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90000000-0x901fffff] [ 3.126766] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref] [ 3.126769] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 3.126771] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.126778] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.126780] pci 0000:00:02.0: bridge window [io 0xa000-0xafff] [ 3.126783] pci 0000:00:02.0: bridge window [mem 0xc7e00000-0xc7efffff] [ 3.126785] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref] [ 3.126788] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.126795] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 3.126805] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 3.126809] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x901fffff] [ 3.126812] pci 0000:00:1c.0: bridge window [mem 0x90200000-0x903fffff 64bit pref] [ 3.126818] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 3.126820] pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff] [ 3.126824] pci 0000:00:1c.4: bridge window [mem 0xc7d00000-0xc7dfffff] [ 3.126832] pci 0000:00:1c.5: PCI bridge to [bus 06] [ 3.126834] pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff] [ 3.126838] pci 0000:00:1c.5: bridge window [mem 0xc7c00000-0xc7cfffff] [ 3.126845] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 3.126847] pci_bus 0000:00: resource 5 [io 0x1000-0xbfff window] [ 3.126848] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 3.126850] pci_bus 0000:00: resource 7 [mem 0x90000000-0xc7ffbfff window] [ 3.126851] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 3.126852] pci_bus 0000:02: resource 1 [mem 0xc7e00000-0xc7efffff] [ 3.126854] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xc01fffff 64bit pref] [ 3.126855] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 3.126856] pci_bus 0000:04: resource 1 [mem 0x90000000-0x901fffff] [ 3.126858] pci_bus 0000:04: resource 2 [mem 0x90200000-0x903fffff 64bit pref] [ 3.126859] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff] [ 3.126860] pci_bus 0000:05: resource 1 [mem 0xc7d00000-0xc7dfffff] [ 3.126861] pci_bus 0000:06: resource 0 [io 0x8000-0x8fff] [ 3.126862] pci_bus 0000:06: resource 1 [mem 0xc7c00000-0xc7cfffff] [ 3.126865] pci_bus 0000:80: resource 4 [io 0xc000-0xffff window] [ 3.126866] pci_bus 0000:80: resource 5 [mem 0xc8000000-0xfbffbfff window] [ 3.127128] NET: Registered protocol family 2 [ 3.127697] TCP established hash table entries: 524288 (order: 10, 4194304 bytes) [ 3.128435] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 3.128613] TCP: Hash tables configured (established 524288 bind 65536) [ 3.128734] UDP hash table entries: 65536 (order: 9, 2097152 bytes) [ 3.129156] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes) [ 3.129635] NET: Registered protocol family 1 [ 3.171704] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 3.171707] PCI: CLS mismatch (64 != 32), using 64 bytes [ 3.171789] Unpacking initramfs... [ 3.554565] Freeing initrd memory: 19648K (ffff9b167598f000 - ffff9b1676cbf000) [ 3.554764] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.554766] software IO TLB [mem 0x75cfc000-0x79cfc000] (64MB) mapped at [ffff9b16b5cfc000-ffff9b16b9cfbfff] [ 3.554802] Intel CQM monitoring enabled [ 3.554802] Intel MBM enabled [ 3.556204] futex hash table entries: 8192 (order: 7, 524288 bytes) [ 3.556352] audit: initializing netlink subsys (disabled) [ 3.556369] audit: type=2000 audit(1485102950.428:1): initialized [ 3.556793] Initialise system trusted keyrings [ 3.557116] workingset: timestamp_bits=40 max_order=25 bucket_order=0 [ 3.557131] zbud: loaded [ 3.599751] Key type asymmetric registered [ 3.599752] Asymmetric key parser 'x509' registered [ 3.599812] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.599936] io scheduler noop registered [ 3.599937] io scheduler deadline registered [ 3.599953] io scheduler cfq registered (default) [ 3.601554] aer 0000:00:01.0:pcie002: service driver aer loaded [ 3.601578] aer 0000:00:02.0:pcie002: service driver aer loaded [ 3.601601] aer 0000:00:03.0:pcie002: service driver aer loaded [ 3.601618] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.601620] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.601628] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 3.601630] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 3.601631] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt [ 3.601633] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 3.601640] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 3.601642] pcie_pme 0000:00:03.0:pcie001: service driver pcie_pme loaded [ 3.601671] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 3.601682] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded [ 3.601710] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 3.601711] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 3.601722] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded [ 3.601749] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 3.601750] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt [ 3.601761] pcie_pme 0000:00:1c.5:pcie001: service driver pcie_pme loaded [ 3.601773] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.601792] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 3.601892] pciehp 0000:00:1c.0:pcie004: service driver pciehp loaded [ 3.601897] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.601917] intel_idle: MWAIT substates: 0x2120 [ 3.601918] intel_idle: v0.4.1 model 0x4F [ 3.603416] intel_idle: lapic_timer_reliable_states 0xffffffff [ 3.609343] ERST: Error Record Serialization Table (ERST) support is initialized. [ 3.609345] pstore: using zlib compression [ 3.609348] pstore: Registered erst as persistent store backend [ 3.609640] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 3.609780] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.630291] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.650840] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.651328] Linux agpgart interface v0.103 [ 3.651480] AMD IOMMUv2 driver by Joerg Roedel [ 3.651480] AMD IOMMUv2 functionality not available on this system [ 3.654610] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 3.657486] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.657490] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.657669] mousedev: PS/2 mouse device common for all mice [ 3.657704] rtc_cmos 00:00: RTC can wake from S4 [ 3.657901] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 3.657949] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 3.657962] intel_pstate: Intel P-state driver initializing [ 3.664881] ledtrig-cpu: registered to indicate activity on CPUs [ 3.666455] NET: Registered protocol family 10 [ 3.667038] mip6: Mobile IPv6 [ 3.667040] NET: Registered protocol family 17 [ 3.667044] mpls_gso: MPLS GSO support [ 3.669256] microcode: sig=0x406f1, pf=0x1, revision=0xb000017 [ 3.670487] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 3.670717] registered taskstats version 1 [ 3.670719] Loading compiled-in X.509 certificates [ 3.673491] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256)) [ 3.673908] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' [ 3.673978] zswap: loaded using pool lzo/zbud [ 3.675865] rtc_cmos 00:00: setting system clock to 2017-01-22 16:35:50 UTC (1485102950) [ 3.676013] PM: Hibernation image not present or could not be loaded. [ 3.678113] Freeing unused kernel memory: 1360K (ffffffff8a91b000 - ffffffff8aa6f000) [ 3.678114] Write protecting the kernel read-only data: 10240k [ 3.678491] Freeing unused kernel memory: 60K (ffff9b3124bf1000 - ffff9b3124c00000) [ 3.683315] Freeing unused kernel memory: 1288K (ffff9b3124ebe000 - ffff9b3125000000) [ 3.694683] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.716638] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.716745] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.716757] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.716770] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.717972] random: udevadm: uninitialized urandom read (16 bytes read) [ 3.718013] random: udevadm: uninitialized urandom read (16 bytes read) [ 3.721024] random: udevadm: uninitialized urandom read (16 bytes read) [ 3.721099] random: udevadm: uninitialized urandom read (16 bytes read) [ 3.721635] random: udevadm: uninitialized urandom read (16 bytes read) [ 3.721709] random: udevadm: uninitialized urandom read (16 bytes read) [ 3.804564] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 3.842728] pps_core: LinuxPPS API ver. 1 registered [ 3.842730] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.844295] PTP clock support registered [ 3.846153] dca service started, version 1.12.1 [ 3.846457] SCSI subsystem initialized [ 3.847401] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.848480] ACPI: bus type USB registered [ 3.848506] usbcore: registered new interface driver usbfs [ 3.848519] usbcore: registered new interface driver hub [ 3.848659] usbcore: registered new device driver usb [ 3.851770] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.853292] libata version 3.00 loaded. [ 3.854663] ehci-pci: EHCI PCI platform driver [ 3.854742] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 3.854744] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.855032] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.855040] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.855094] ehci-pci 0000:00:1a.0: debug port 2 [ 3.855565] igb 0000:05:00.0: PHY reset is blocked due to SOL/IDER session. [ 3.858999] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.859018] ehci-pci 0000:00:1a.0: irq 19, io mem 0xc7f14000 [ 3.868957] AVX2 version of gcm_enc/dec engaged. [ 3.868958] AES CTR mode by8 optimization enabled [ 3.871553] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.871724] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.871726] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.871728] usb usb1: Product: EHCI Host Controller [ 3.871729] usb usb1: Manufacturer: Linux 4.8.0-2-amd64 ehci_hcd [ 3.871731] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.871980] hub 1-0:1.0: USB hub found [ 3.871990] hub 1-0:1.0: 2 ports detected [ 3.872426] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.872433] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.872451] ehci-pci 0000:00:1d.0: debug port 2 [ 3.876360] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.876367] ehci-pci 0000:00:1d.0: irq 18, io mem 0xc7f13000 [ 3.880526] pps pps0: new PPS source ptp0 [ 3.880528] igb 0000:05:00.0: added PHC on eth0 [ 3.880530] igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection [ 3.880532] igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 34:97:f6:5c:0a:1f [ 3.880596] igb 0000:05:00.0: eth0: PBA No: 001300-000 [ 3.880597] igb 0000:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 3.891601] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.891655] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.891656] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.891658] usb usb2: Product: EHCI Host Controller [ 3.891659] usb usb2: Manufacturer: Linux 4.8.0-2-amd64 ehci_hcd [ 3.891659] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.891896] hub 2-0:1.0: USB hub found [ 3.891900] hub 2-0:1.0: 2 ports detected [ 3.892125] ahci 0000:00:11.4: version 3.0 [ 3.892419] ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 3.892421] ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst [ 3.909810] pps pps1: new PPS source ptp1 [ 3.909812] igb 0000:06:00.0: added PHC on eth1 [ 3.909814] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection [ 3.909816] igb 0000:06:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 34:97:f6:5c:0a:20 [ 3.909875] igb 0000:06:00.0: eth1: PBA No: 001300-000 [ 3.909878] igb 0000:06:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 3.911286] igb 0000:06:00.0 eth2: renamed from eth1 [ 3.932253] scsi host0: ahci [ 3.932414] scsi host1: ahci [ 3.932554] scsi host2: ahci [ 3.932706] scsi host3: ahci [ 3.932771] ata1: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18100 irq 43 [ 3.932773] ata2: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18180 irq 43 [ 3.932775] ata3: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18200 irq 43 [ 3.932777] ata4: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18280 irq 43 [ 3.933061] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 3.933063] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 3.943688] igb 0000:05:00.0 eth1: renamed from eth0 [ 3.992531] scsi host4: ahci [ 3.992696] scsi host5: ahci [ 3.992866] scsi host6: ahci [ 3.993042] scsi host7: ahci [ 3.993219] scsi host8: ahci [ 3.993380] scsi host9: ahci [ 3.993463] ata5: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12100 irq 44 [ 3.993465] ata6: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12180 irq 44 [ 3.993467] ata7: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12200 irq 44 [ 3.993469] ata8: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12280 irq 44 [ 3.993470] ata9: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12300 irq 44 [ 3.993472] ata10: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12380 irq 44 [ 3.993729] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.993738] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 3.994872] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 3.994877] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.995327] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.995330] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.995332] usb usb3: Product: xHCI Host Controller [ 3.995334] usb usb3: Manufacturer: Linux 4.8.0-2-amd64 xhci-hcd [ 3.995335] usb usb3: SerialNumber: 0000:00:14.0 [ 3.995671] hub 3-0:1.0: USB hub found [ 3.995718] hub 3-0:1.0: 15 ports detected [ 3.999465] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.999494] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 3.999550] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.999552] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.999554] usb usb4: Product: xHCI Host Controller [ 3.999555] usb usb4: Manufacturer: Linux 4.8.0-2-amd64 xhci-hcd [ 3.999557] usb usb4: SerialNumber: 0000:00:14.0 [ 3.999788] hub 4-0:1.0: USB hub found [ 3.999809] hub 4-0:1.0: 6 ports detected [ 4.199534] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.219529] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 4.246591] ata4: SATA link down (SStatus 0 SControl 300) [ 4.246813] ata3: SATA link down (SStatus 0 SControl 300) [ 4.246839] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.246868] ata2: SATA link down (SStatus 0 SControl 300) [ 4.250349] ata1.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133 [ 4.250352] ata1.00: 145226112 sectors, multi 16: LBA48 [ 4.254985] ata1.00: configured for UDMA/133 [ 4.255590] scsi 0:0:0:0: Direct-Access ATA WDC WD740GD-00FL 8F33 PQ: 0 ANSI: 5 [ 4.305944] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.306561] ata6.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 4.306564] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.306872] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.306901] ata9: SATA link down (SStatus 0 SControl 300) [ 4.306926] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.306955] ata10: SATA link down (SStatus 0 SControl 300) [ 4.306989] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.307176] ata6.00: configured for UDMA/133 [ 4.307459] ata8.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 4.307461] ata8.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.307529] ata7.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 4.307531] ata7.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.307560] ata5.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 4.307561] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.308082] ata7.00: configured for UDMA/133 [ 4.308094] ata8.00: configured for UDMA/133 [ 4.308123] ata5.00: configured for UDMA/133 [ 4.308516] scsi 4:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 4.323521] usb 3-4: new full-speed USB device number 2 using xhci_hcd [ 4.347910] usb 1-1: New USB device found, idVendor=8087, idProduct=800a [ 4.347913] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.348198] hub 1-1:1.0: USB hub found [ 4.348278] hub 1-1:1.0: 6 ports detected [ 4.356246] scsi 5:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 4.358672] sd 0:0:0:0: [sda] 145226112 512-byte logical blocks: (74.4 GB/69.2 GiB) [ 4.358709] sd 4:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 4.358712] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 4.358726] sd 0:0:0:0: [sda] Write Protect is off [ 4.358731] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.358744] sd 4:0:0:0: [sdb] Write Protect is off [ 4.358747] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.358753] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.358761] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.367782] usb 2-1: New USB device found, idVendor=8087, idProduct=8002 [ 4.367785] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.368073] hub 2-1:1.0: USB hub found [ 4.368155] hub 2-1:1.0: 8 ports detected [ 4.379586] sda: sda1 sda2 < sda5 > [ 4.380013] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.399644] sd 5:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 4.399646] sd 5:0:0:0: [sdc] 4096-byte physical blocks [ 4.399670] sd 5:0:0:0: [sdc] Write Protect is off [ 4.399672] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 4.399684] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.400045] scsi 6:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 4.418315] sdb: sdb1 [ 4.418574] sd 4:0:0:0: [sdb] Attached SCSI disk [ 4.443623] sd 6:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 4.443625] sd 6:0:0:0: [sdd] 4096-byte physical blocks [ 4.443646] sd 6:0:0:0: [sdd] Write Protect is off [ 4.443648] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.443658] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.444016] scsi 7:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 4.462771] sdc: sdc1 [ 4.463009] sd 5:0:0:0: [sdc] Attached SCSI disk [ 4.469897] usb 3-4: New USB device found, idVendor=046d, idProduct=c52b [ 4.469900] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.469902] usb 3-4: Product: USB Receiver [ 4.469903] usb 3-4: Manufacturer: Logitech [ 4.475810] hidraw: raw HID events driver (C) Jiri Kosina [ 4.481820] usbcore: registered new interface driver usbhid [ 4.481821] usbhid: USB HID core driver [ 4.484631] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2 [ 4.487613] sd 7:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 4.487615] sd 7:0:0:0: [sde] 4096-byte physical blocks [ 4.487639] sd 7:0:0:0: [sde] Write Protect is off [ 4.487641] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 4.487651] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.497017] sdd: sdd1 [ 4.497293] sd 6:0:0:0: [sdd] Attached SCSI disk [ 4.515555] random: fast init done [ 4.539906] sde: sde1 [ 4.540217] sd 7:0:0:0: [sde] Attached SCSI disk [ 4.571502] tsc: Refined TSC clocksource calibration: 2095.148 MHz [ 4.571538] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e3349143ab, max_idle_ns: 440795282364 ns [ 4.613669] input: Logitech K520 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:2011.0005/input/input3 [ 4.613875] logitech-hidpp-device 0003:046D:2011.0005: input,hidraw1: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:14.0-4:2 [ 4.651331] md: bind [ 4.688417] md: bind [ 4.692251] md: raid1 personality registered for level 1 [ 4.692816] md/raid1:md127: active with 2 out of 2 mirrors [ 4.692928] created bitmap (22 pages) for device md127 [ 4.693674] md127: bitmap initialized from disk: read 2 pages, set 0 of 44709 bits [ 4.714651] md: bind [ 4.719914] md: bind [ 4.722106] md/raid1:md0: active with 2 out of 2 mirrors [ 4.722203] created bitmap (22 pages) for device md0 [ 4.722914] md0: bitmap initialized from disk: read 2 pages, set 0 of 44709 bits [ 4.758436] md127: detected capacity change from 0 to 3000312528896 [ 4.800272] md0: detected capacity change from 0 to 3000312528896 [ 4.871922] random: crng init done [ 5.008291] device-mapper: uevent: version 1.0.3 [ 5.008451] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@xxxxxxxxxx [ 5.595719] clocksource: Switched to clocksource tsc [ 9.821328] input: Logitech M310/M310t as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:4031.0004/input/input4 [ 9.821488] logitech-hidpp-device 0003:046D:4031.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech M310/M310t] on usb-0000:00:14.0-4:1 [ 9.828474] md: linear personality registered for level -1 [ 9.831316] md: multipath personality registered for level -4 [ 9.834108] md: raid0 personality registered for level 0 [ 9.907060] raid6: sse2x1 gen() 3100 MB/s [ 9.975057] raid6: sse2x1 xor() 2573 MB/s [ 10.043050] raid6: sse2x2 gen() 5770 MB/s [ 10.111043] raid6: sse2x2 xor() 3255 MB/s [ 10.179042] raid6: sse2x4 gen() 6024 MB/s [ 10.247032] raid6: sse2x4 xor() 3632 MB/s [ 10.315026] raid6: avx2x1 gen() 8302 MB/s [ 10.383020] raid6: avx2x2 gen() 11415 MB/s [ 10.451016] raid6: avx2x4 gen() 11918 MB/s [ 10.451016] raid6: using algorithm avx2x4 gen() 11918 MB/s [ 10.451017] raid6: using avx2x2 recovery algorithm [ 10.451813] xor: automatically using best checksumming function: [ 10.491009] avx : 17693.000 MB/sec [ 10.491763] async_tx: api initialized (async) [ 10.497715] md: raid6 personality registered for level 6 [ 10.497716] md: raid5 personality registered for level 5 [ 10.497717] md: raid4 personality registered for level 4 [ 10.503564] md: raid10 personality registered for level 10 [ 10.526177] PM: Starting manual resume from disk [ 10.526180] PM: Hibernation image partition 253:5 present [ 10.526181] PM: Looking for hibernation image. [ 10.526289] PM: Image not found (code -22) [ 10.526290] PM: Hibernation image not present or could not be loaded. [ 10.692806] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 12.523486] power_meter ACPI000D:00: Found ACPI power meter. [ 12.523709] power_meter ACPI000D:00: Ignoring unsafe software power cap! [ 12.523993] wmi: Mapper loaded [ 12.526142] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.543100] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 12.543107] ACPI: Power Button [PWRB] [ 12.543178] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 12.543181] ACPI: Power Button [PWRF] [ 12.720003] ipmi message handler version 39.2 [ 12.735437] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 12.735439] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 12.735439] RAPL PMU: hw unit of domain package 2^-14 Joules [ 12.735440] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 12.735441] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 12.884585] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 12.884674] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 12.884744] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 12.884804] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 12.884862] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 12.963421] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 13.046786] ipmi_si IPI0001:00: ipmi_si: probing via ACPI [ 13.046826] ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 13.046839] ipmi_si: Adding ACPI-specified kcs state machine [ 13.046868] IPMI System Interface driver. [ 13.046948] ipmi_si: probing via SMBIOS [ 13.046950] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 13.046950] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface [ 13.046954] ipmi_si: probing via SPMI [ 13.046956] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0 [ 13.046957] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface [ 13.046960] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 13.283979] iTCO_vendor_support: vendor-support=0 [ 13.302419] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 13.302470] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 13.400034] ipmi_si IPI0001:00: Found new BMC (man_id: 0x000a3f, prod_id: 0x0e73, dev_id: 0x20) [ 13.400046] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 13.501830] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 13.562206] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client [ 13.562209] snd_hda_intel 0000:02:00.1: Force to non-snoop mode [ 13.574923] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input8 [ 13.575080] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input9 [ 13.575187] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input10 [ 13.575288] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input11 [ 13.575394] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input12 [ 14.282072] EDAC MC: Ver: 3.0.0 [ 14.294993] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 [ 14.295004] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 [ 14.295012] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 [ 14.295018] EDAC sbridge: Seeking for: PCI ID 8086:6ffc [ 14.295022] EDAC sbridge: Seeking for: PCI ID 8086:6ffc [ 14.295028] EDAC sbridge: Seeking for: PCI ID 8086:6ffc [ 14.295033] EDAC sbridge: Seeking for: PCI ID 8086:6ffd [ 14.295037] EDAC sbridge: Seeking for: PCI ID 8086:6ffd [ 14.295043] EDAC sbridge: Seeking for: PCI ID 8086:6ffd [ 14.295047] EDAC sbridge: Seeking for: PCI ID 8086:6f60 [ 14.295056] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 [ 14.295060] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 [ 14.295066] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 [ 14.295070] EDAC sbridge: Seeking for: PCI ID 8086:6f71 [ 14.295075] EDAC sbridge: Seeking for: PCI ID 8086:6f71 [ 14.295080] EDAC sbridge: Seeking for: PCI ID 8086:6f71 [ 14.295084] EDAC sbridge: Seeking for: PCI ID 8086:6faa [ 14.295089] EDAC sbridge: Seeking for: PCI ID 8086:6faa [ 14.295094] EDAC sbridge: Seeking for: PCI ID 8086:6faa [ 14.295098] EDAC sbridge: Seeking for: PCI ID 8086:6fab [ 14.295103] EDAC sbridge: Seeking for: PCI ID 8086:6fab [ 14.295108] EDAC sbridge: Seeking for: PCI ID 8086:6fab [ 14.295112] EDAC sbridge: Seeking for: PCI ID 8086:6fac [ 14.295117] EDAC sbridge: Seeking for: PCI ID 8086:6fac [ 14.295123] EDAC sbridge: Seeking for: PCI ID 8086:6fac [ 14.295126] EDAC sbridge: Seeking for: PCI ID 8086:6fad [ 14.295131] EDAC sbridge: Seeking for: PCI ID 8086:6fad [ 14.295137] EDAC sbridge: Seeking for: PCI ID 8086:6fad [ 14.295140] EDAC sbridge: Seeking for: PCI ID 8086:6faf [ 14.295145] EDAC sbridge: Seeking for: PCI ID 8086:6faf [ 14.295151] EDAC sbridge: Seeking for: PCI ID 8086:6faf [ 14.295154] EDAC sbridge: Seeking for: PCI ID 8086:6f68 [ 14.295160] EDAC sbridge: Seeking for: PCI ID 8086:6f68 [ 14.295166] EDAC sbridge: Seeking for: PCI ID 8086:6f68 [ 14.295169] EDAC sbridge: Seeking for: PCI ID 8086:6f79 [ 14.295177] EDAC sbridge: Seeking for: PCI ID 8086:6f6a [ 14.295186] EDAC sbridge: Seeking for: PCI ID 8086:6f6b [ 14.295195] EDAC sbridge: Seeking for: PCI ID 8086:6f6c [ 14.295204] EDAC sbridge: Seeking for: PCI ID 8086:6f6d [ 14.295446] EDAC MC0: Giving out device to module sbridge_edac.c controller Broadwell Socket#0: DEV 0000:ff:12.0 (INTERRUPT) [ 14.295761] EDAC MC1: Giving out device to module sbridge_edac.c controller Broadwell Socket#1: DEV 0000:7f:12.0 (INTERRUPT) [ 14.295763] EDAC sbridge: Ver: 1.1.1 [ 14.310491] intel_rapl: Found RAPL domain package [ 14.310503] intel_rapl: Found RAPL domain dram [ 14.310505] intel_rapl: DRAM domain energy unit 15300pj [ 14.310530] intel_rapl: Found RAPL domain package [ 14.310540] intel_rapl: Found RAPL domain dram [ 14.310542] intel_rapl: DRAM domain energy unit 15300pj [ 15.469818] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 15.687697] Adding 4247548k swap on /dev/mapper/vgsys-lvswap. Priority:-1 extents:1 across:4247548k FS [ 16.139546] lp: driver loaded but no devices found [ 16.157548] ppdev: user-space parallel port driver [ 16.203268] loop: module loaded [ 16.272357] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 16.370566] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 16.893201] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 16.896262] xenbr0: port 1(eth1) entered blocking state [ 16.896264] xenbr0: port 1(eth1) entered disabled state [ 16.896402] device eth1 entered promiscuous mode [ 16.938503] igb 0000:05:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 16.940365] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready [ 17.914576] xenbr0: port 1(eth1) entered blocking state [ 17.914579] xenbr0: port 1(eth1) entered forwarding state [ 17.914801] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready [ 25.987879] RPC: Registered named UNIX socket transport module. [ 25.987880] RPC: Registered udp transport module. [ 25.987881] RPC: Registered tcp transport module. [ 25.987882] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 26.015710] FS-Cache: Loaded [ 26.057367] FS-Cache: Netfs 'nfs' registered for caching [ 26.096463] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).