|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v13 3/3] iommu: add rmrr Xen command line option for extra rmrrs
From: Elena Ufimtseva <elena.ufimtseva@xxxxxxxxxx>
On some platforms firmware fails to specify RMRR regions in ACPI tables and
thus those regions will not be mapped in dom0 or guests and may cause IO
Page Faults and prevent dom0 from booting if "iommu=dom0-strict" option is
specified on the Xen command line.
New Xen command line option rmrr allows to specify such devices and
memory regions. These regions are added to the list of RMRR defined in ACPI
if the device is present in system. As a result, additional RMRRs will be
mapped 1:1 in dom0 with correct permissions.
The above mentioned problems were discovered during the PVH work with
ThinkCentre M and Dell 5600T. No official documentation was found so far
in regards to what devices and why cause this. Experiments show that
ThinkCentre M USB devices with enabled debug port generate DMA read
transactions to the regions of memory marked reserved in host e820 map.
For Dell 5600T the device and faulting addresses are not found yet.
For detailed history of the discussion please check following threads:
http://lists.Xen.org/archives/html/xen-devel/2015-02/msg01724.html
http://lists.Xen.org/archives/html/xen-devel/2015-01/msg02513.html
Format for rmrr Xen command line option:
rmrr=start<-end>=[s1]bdf1[,[s1]bdf2[,...]];start<-end>=[s2]bdf1[,[s2]bdf2[,...]]
For example, for Lenovo ThinkCentre M, use:
rmrr=0xd5d45=0:0:1d.0;0xd5d46=0:0:1a.0
If grub2 used and multiple ranges are specified, ';' should be
quoted/escaped, refer to grub2 manual for more information.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@xxxxxxxxxx>
Signed-off-by: Venu Busireddy <venu.busireddy@xxxxxxxxxx>
---
docs/misc/xen-command-line.markdown | 13 +++
xen/drivers/passthrough/vtd/dmar.c | 201 +++++++++++++++++++++++++++++++++++-
2 files changed, 213 insertions(+), 1 deletion(-)
Changes in v13:
- Implement feedback from Kevin Tian.
https://lists.xenproject.org/archives/html/xen-devel/2015-10/msg03169.html
https://lists.xenproject.org/archives/html/xen-devel/2015-10/msg03170.html
https://lists.xenproject.org/archives/html/xen-devel/2015-10/msg03171.html
- Limit all source lines and comments to 80 characters per line.
- Implement coding style suggestions from Konrad Wilk.
diff --git a/docs/misc/xen-command-line.markdown
b/docs/misc/xen-command-line.markdown
index 0138978..a11fdf9 100644
--- a/docs/misc/xen-command-line.markdown
+++ b/docs/misc/xen-command-line.markdown
@@ -1377,6 +1377,19 @@ Specify the host reboot method.
'efi' instructs Xen to reboot using the EFI reboot call (in EFI mode by
default it will use that method first).
+### rmrr
+> '=
start<-end>=[s1]bdf1[,[s1]bdf2[,...]];start<-end>=[s2]bdf1[,[s2]bdf2[,...]]
+
+Define RMRR units that are missing from ACPI table along with device they
+belong to and use them for 1:1 mapping. End addresses can be omitted and one
+page will be mapped. The ranges are inclusive when start and end are specified.
+If segment of the first device is not specified, segment zero will be used.
+If other segments are not specified, first device segment will be used.
+If a segment is specified for other than the first device and it does not match
+the one specified for the first one, an error will be reported.
+Note: grub2 requires to escape or use quotations if special characters are
used,
+namely ';', refer to the grub2 documentation if multiple ranges are specified.
+
### ro-hpet
> `= <boolean>`
diff --git a/xen/drivers/passthrough/vtd/dmar.c
b/xen/drivers/passthrough/vtd/dmar.c
index 84bf63d..23ba7a6 100644
--- a/xen/drivers/passthrough/vtd/dmar.c
+++ b/xen/drivers/passthrough/vtd/dmar.c
@@ -859,6 +859,132 @@ out:
return ret;
}
+#define MAX_EXTRA_RMRR_PAGES 16
+#define MAX_EXTRA_RMRR 10
+
+/* RMRR units derived from command line rmrr option. */
+#define MAX_EXTRA_RMRR_DEV 20
+struct user_rmrr {
+ struct list_head list;
+ unsigned long base_pfn, end_pfn;
+ unsigned int dev_count;
+ u32 sbdf[MAX_EXTRA_RMRR_DEV];
+};
+
+static __initdata unsigned int nr_rmrr;
+static struct __initdata user_rmrr user_rmrrs[MAX_EXTRA_RMRR];
+
+/* Macro for RMRR inclusive range formatting. */
+#define ERMRRU_FMT "[%lx-%lx]"
+#define ERMRRU_ARG(eru) eru.base_pfn, eru.end_pfn
+
+static int __init add_user_rmrr(void)
+{
+ struct acpi_rmrr_unit *rmrr, *rmrru;
+ unsigned int idx, seg, i;
+ unsigned long base, end;
+ bool overlap;
+
+ for ( i = 0; i < nr_rmrr; i++ )
+ {
+ base = user_rmrrs[i].base_pfn;
+ end = user_rmrrs[i].end_pfn;
+
+ if ( base > end )
+ {
+ printk(XENLOG_ERR VTDPREFIX
+ "Invalid RMRR Range "ERMRRU_FMT"\n",
+ ERMRRU_ARG(user_rmrrs[i]));
+ continue;
+ }
+
+ if ( (end - base) >= MAX_EXTRA_RMRR_PAGES )
+ {
+ printk(XENLOG_ERR VTDPREFIX
+ "RMRR range "ERMRRU_FMT" exceeds "\
+ __stringify(MAX_EXTRA_RMRR_PAGES)" pages\n",
+ ERMRRU_ARG(user_rmrrs[i]));
+ continue;
+ }
+
+ overlap = false;
+ list_for_each_entry(rmrru, &acpi_rmrr_units, list)
+ {
+ if ( pfn_to_paddr(base) < rmrru->end_address &&
+ rmrru->base_address < pfn_to_paddr(end + 1) )
+ {
+ printk(XENLOG_ERR VTDPREFIX
+ "Overlapping RMRRs: "ERMRRU_FMT" and [%lx-%lx]\n",
+ ERMRRU_ARG(user_rmrrs[i]),
+ paddr_to_pfn(rmrru->base_address),
+ paddr_to_pfn(rmrru->end_address));
+ overlap = true;
+ break;
+ }
+ }
+ /* Don't add overlapping RMRR. */
+ if ( overlap )
+ continue;
+
+ do
+ {
+ if ( !mfn_valid(base) )
+ {
+ printk(XENLOG_ERR VTDPREFIX
+ "Invalid pfn in RMRR range "ERMRRU_FMT"\n",
+ ERMRRU_ARG(user_rmrrs[i]));
+ break;
+ }
+ } while ( base++ < end );
+
+ /* Invalid pfn in range as the loop ended before end_pfn was reached.
*/
+ if ( base <= end )
+ continue;
+
+ rmrr = xzalloc(struct acpi_rmrr_unit);
+ if ( !rmrr )
+ return -ENOMEM;
+
+ rmrr->scope.devices = xmalloc_array(u16, user_rmrrs[i].dev_count);
+ if ( !rmrr->scope.devices )
+ {
+ xfree(rmrr);
+ return -ENOMEM;
+ }
+
+ seg = 0;
+ for ( idx = 0; idx < user_rmrrs[i].dev_count; idx++ )
+ {
+ rmrr->scope.devices[idx] = user_rmrrs[i].sbdf[idx];
+ seg |= PCI_SEG(user_rmrrs[i].sbdf[idx]);
+ }
+ if ( seg != PCI_SEG(user_rmrrs[i].sbdf[0]) )
+ {
+ printk(XENLOG_ERR VTDPREFIX
+ "Segments are not equal for RMRR range "ERMRRU_FMT"\n",
+ ERMRRU_ARG(user_rmrrs[i]));
+ scope_devices_free(&rmrr->scope);
+ xfree(rmrr);
+ continue;
+ }
+
+ rmrr->segment = seg;
+ rmrr->base_address = pfn_to_paddr(user_rmrrs[i].base_pfn);
+ rmrr->end_address = pfn_to_paddr(user_rmrrs[i].end_pfn + 1);
+ rmrr->scope.devices_cnt = user_rmrrs[i].dev_count;
+
+ if ( register_one_rmrr(rmrr) )
+ {
+ printk(XENLOG_ERR VTDPREFIX
+ "Could not register RMMR range "ERMRRU_FMT"\n",
+ ERMRRU_ARG(user_rmrrs[i]));
+ scope_devices_free(&rmrr->scope);
+ xfree(rmrr);
+ }
+ }
+ return 0;
+}
+
#include <asm/tboot.h>
/* ACPI tables may not be DMA protected by tboot, so use DMAR copy */
/* SINIT saved in SinitMleData in TXT heap (which is DMA protected) */
@@ -868,6 +994,7 @@ int __init acpi_dmar_init(void)
{
acpi_physical_address dmar_addr;
acpi_native_uint dmar_len;
+ int ret;
if ( ACPI_SUCCESS(acpi_get_table_phys(ACPI_SIG_DMAR, 0,
&dmar_addr, &dmar_len)) )
@@ -878,7 +1005,12 @@ int __init acpi_dmar_init(void)
dmar_table = __va(dmar_addr);
}
- return parse_dmar_table(acpi_parse_dmar);
+ ret = parse_dmar_table(acpi_parse_dmar);
+
+ if ( !ret )
+ return add_user_rmrr();
+
+ return ret;
}
void acpi_dmar_reinstate(void)
@@ -937,3 +1069,70 @@ int intel_iommu_get_reserved_device_memory(iommu_grdm_t
*func, void *ctxt)
return 0;
}
+
+/*
+ * Parse rmrr Xen command line options and add parsed devices and regions into
+ * acpi_rmrr_unit list to mapped as RMRRs parsed from ACPI.
+ * Format:
+ *
rmrr=start<-end>=[s1]bdf1[,[s1]bdf2[,...]];start<-end>=[s2]bdf1[,[s2]bdf2[,...]]
+ * If the segment of the first device is not specified,
+ * segment zero will be used.
+ * If other segments are not specified, first device segment will be used.
+ * If a segment is specified for other than the first device, and it does not
+ * match the one specified for the first one, an error will be reported.
+ */
+static void __init parse_rmrr_param(const char *str)
+{
+ const char *s = str, *cur, *stmp;
+ unsigned int seg, bus, dev, func, dev_count;
+ unsigned long start, end;
+
+ do {
+ start = simple_strtoul(cur = s, &s, 0);
+ if ( cur == s )
+ break;
+
+ if ( *s == '-' )
+ {
+ end = simple_strtoul(cur = s + 1, &s, 0);
+ if ( cur == s )
+ break;
+ }
+ else
+ end = start;
+
+ user_rmrrs[nr_rmrr].base_pfn = start;
+ user_rmrrs[nr_rmrr].end_pfn = end;
+
+ if ( *s != '=' )
+ continue;
+
+ do {
+ bool def_seg = false;
+
+ stmp = parse_pci_seg(s + 1, &seg, &bus, &dev, &func, &def_seg);
+ if ( !stmp )
+ break;
+
+ /*
+ * Not specified.
+ * Segment will be replaced with one from first device.
+ */
+ if ( user_rmrrs[nr_rmrr].dev_count && def_seg )
+ seg = PCI_SEG(user_rmrrs[nr_rmrr].sbdf[0]);
+
+ /* Keep sbdf's even if they differ and later report an error. */
+ dev_count = user_rmrrs[nr_rmrr].dev_count;
+ user_rmrrs[nr_rmrr].sbdf[dev_count] = PCI_SBDF(seg, bus, dev,
func);
+
+ user_rmrrs[nr_rmrr].dev_count++;
+ s = stmp;
+ } while ( *s == ',' &&
+ user_rmrrs[nr_rmrr].dev_count < MAX_EXTRA_RMRR_DEV );
+
+ if ( user_rmrrs[nr_rmrr].dev_count )
+ nr_rmrr++;
+
+ } while ( *s++ == ';' && nr_rmrr < MAX_EXTRA_RMRR );
+}
+custom_param("rmrr", parse_rmrr_param);
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |