|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Error regarding filesystem in Dom0 in lager board
Hi, I just bumped in to some errors related to filesystem . The following is the log. I am using xen 4.7.1 along with linux kernel 3.19.8 as Dom0Starting kernel ... - UART enabled - - CPU 00000000 booting - - Xen starting in Hyp mode - - Zero BSS - - Setting up control registers - - Turning on paging - - Ready - (XEN) Checking for initrd in /chosen (XEN) RAM: 0000000040000000 - 000000007fffffff (XEN) RAM: 0000000140000000 - 00000001ffffffff (XEN) (XEN) MODULE[0]: 0000000040ef2000 - 0000000040efe000 Device Tree (XEN) MODULE[1]: 0000000072000000 - 00000000722a0660 Kernel (XEN) MODULE[2]: 0000000074000000 - 000000007400284f XSM (XEN) RESVD[0]: 000000007ff9a000 - 000000007ff9a120 (XEN) RESVD[1]: 0000000040ef2000 - 0000000040efe000 (XEN) (XEN) Command line: console=dtuart dom0_mem=1G (XEN) Placing Xen at 0x000000007fc00000-0x000000007fe00000 (XEN) Update BOOTMOD_XEN from 0000000090000000-0000000090105781 => 000000007fc00000-000000007fd05781 (XEN) Xen heap: 00000001f8000000-0000000200000000 (32768 pages) (XEN) Dom heap: 1015808 pages (XEN) Domain heap initialised (XEN) Platform: Renesas R-Car Gen2 (XEN) Taking dtuart configuration from /chosen/stdout-path (XEN) Looking for dtuart at "serial0", options "38400n8" (XEN) WARNING: UART configuration is not supported Xen 4.7.1 (XEN) Xen version 4.7.1 (teltvm@xxxxxxxxxxxxxx) (arm-linux-gnueabihf-gcc (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) 4.8.4) debug=y Mon Nov 7 11:44:45 IST 2016 (XEN) Latest ChangeSet: (XEN) Processor: 413fc0f2: "ARM Limited", variant: 0x3, part 0xc0f, rev 0x2 (XEN) 32-bit Execution: (XEN) Processor Features: 00001131:00011011 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jazelle (XEN) Extensions: GenericTimer Security (XEN) Debug Features: 02010555 (XEN) Auxiliary Features: 00000000 (XEN) Memory Model Features: 10201105 40000000 01240000 02102211 (XEN) ISA Features: 02101110 13112111 21232041 11112131 10011142 00000000 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 10000 KHz (XEN) GICv2: WARNING: The GICC size is too small: 0x1000 expected 0x2000 (XEN) GICv2 initialization: (XEN) gic_dist_addr=00000000f1001000 (XEN) gic_cpu_addr=00000000f1002000 (XEN) gic_hyp_addr=00000000f1004000 (XEN) gic_vcpu_addr=00000000f1006000 (XEN) gic_maintenance_irq=25 (XEN) GICv2: 416 lines, 8 cpus, secure (IID 0200043b). (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Allocated console ring of 64 KiB. (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 (XEN) Bringing up CPU1 - CPU 00000001 booting - - Xen starting in Hyp mode - - Setting up control registers - - Turning on paging - - Ready - (XEN) CPU 1 booted. (XEN) Bringing up CPU2 - CPU 00000002 booting - - Xen starting in Hyp mode - - Setting up control registers - - Turning on paging - - Ready - (XEN) CPU 2 booted. (XEN) Bringing up CPU3 - CPU 00000003 booting - - Xen starting in Hyp mode - - Setting up control registers - - Turning on paging - - Ready - (XEN) CPU 3 booted. (XEN) Bringing up CPU4 (XEN) CPU4 never came online (XEN) Failed to bring up CPU 4 (error -5) (XEN) Bringing up CPU5 (XEN) CPU5 never came online (XEN) Failed to bring up CPU 5 (error -5) (XEN) Bringing up CPU6 (XEN) CPU6 never came online (XEN) Failed to bring up CPU 6 (error -5) (XEN) Bringing up CPU7 (XEN) CPU7 never came online (XEN) Failed to bring up CPU 7 (error -5) (XEN) Brought up 4 CPUs (XEN) P2M: 40-bit IPA (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 (XEN) I/O virtualisation disabled (XEN) *** LOADING DOMAIN 0 *** (XEN) Loading kernel from boot module @ 0000000072000000 (XEN) Allocating 1:1 mappings totalling 1024MB for dom0: (XEN) BANK[0] 0x00000048000000-0x00000070000000 (640MB) (XEN) BANK[1] 0x000001d8000000-0x000001f0000000 (384MB) (XEN) Grant table range: 0x0000007fc00000-0x0000007fc64000 (XEN) Loading zImage from 0000000072000000 to 000000004fc00000-000000004fe79fb8 (XEN) Allocating PPI 16 for event channel interrupt (XEN) Loading dom0 DTB to 0x0000000050000000-0x000000005000ab70 (XEN) Scrubbing Free RAM on 1 nodes using 4 CPUs (XEN) ........done. (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 276kB init memory. Booting Linux on physical CPU 0x0 Linux version 3.19.8 (teltvm@teltvm2038x) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #23 Mon Nov 14 17:20:55 IST 2016 CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=10c53c7d CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Machine model: Lager Ignoring memory block 0x1d8000000 - 0x1f0000000 Truncating RAM at 0x48000000-0x70000000 to -0x6f000000 Memory policy: Data cache writeback ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:144 arm_dt_init_cpu_maps+0xc0/0x12c() DT /cpu 2 nodes greater than max cores 1, capping them CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.8 #23 Hardware name: lager Backtrace: [<c00121f4>] (dump_backtrace) from [<c0012388>] (show_stack+0x18/0x1c) r6:c0476ecb r5:00000009 r4:00000000 r3:00200000 [<c0012370>] (show_stack) from [<c03cf7f4>] (dump_stack+0x20/0x28) [<c03cf7d4>] (dump_stack) from [<c0021ba4>] (warn_slowpath_common+0x88/0xb0) [<c0021b1c>] (warn_slowpath_common) from [<c0021c38>] (warn_slowpath_fmt+0x38/0x40) r8:c04fbee8 r7:e6b187dc r6:00000001 r5:00000000 r4:e6b18a44 [<c0021c04>] (warn_slowpath_fmt) from [<c04c228c>] (arm_dt_init_cpu_maps+0xc0/0x12c) r3:00000002 r2:c0476f0e [<c04c21cc>] (arm_dt_init_cpu_maps) from [<c04c1964>] (setup_arch+0x5e0/0x78c) r7:c04f3708 r6:c052af98 r5:c04de83c r4:e6b18f80 [<c04c1384>] (setup_arch) from [<c04bf9c4>] (start_kernel+0x80/0x33c) r10:00000000 r9:c04f0000 r8:48004059 r7:ffffffff r6:c0512b40 r5:00000001 r4:00000000 [<c04bf944>] (start_kernel) from [<48008070>] (0x48008070) r10:00000000 r9:413fc0f2 r8:48004059 r7:c04f3810 r6:c04dfbf8 r5:c04f0078 r4:c05135d4 ---[ end trace cb88537fdc8fa200 ]--- psci: probing for conduit method from DT. psci: PSCIv0.2 detected in firmware. psci: Using standard PSCI v0.2 function IDs CPU: All CPU(s) started in SVC mode. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 158496 Kernel command line: console=hvc0 vmalloc=384M video=HDMI-A-1:1920x1080-32@60 rw root=/dev/mmcblk0p1 rootfstype=ext2 rdinit=/sbin/init rootwait fixrtc PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 627628K/638976K available (3887K kernel code, 170K rwdata, 936K rodata, 164K init, 164K bss, 11348K reserved, 0K cma-reserved) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe7800000 - 0xff000000 ( 376 MB) lowmem : 0xc0000000 - 0xe7000000 ( 624 MB) .text : 0xc0008000 - 0xc04befb4 (4828 kB) .init : 0xc04bf000 - 0xc04e8000 ( 164 kB) .data : 0xc04e8000 - 0xc0512b40 ( 171 kB) .bss : 0xc0512b40 - 0xc053bdb8 ( 165 kB) NR_IRQS:16 nr_irqs:16 16 sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 16777216000000000ns Console: colour dummy device 80x30 Calibrating delay loop (skipped) preset value.. 1300.08 BogoMIPS (lpj=5078125) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) CPU: Testing write buffer coherency: ok irq: no irq domain found for /interrupt-controller ! Xen 4.7 support found, events_irq=0 gnttab_frame=0x7fc00000 xen:grant_table: Grant tables using version 1 layout Grant table initialized xen:events: Using FIFO-based ABI Error request IRQ 0 Setting up static identity map for 0x483d32b0 - 0x483d3308 devtmpfs: initialized VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations xen:swiotlb_xen: Warning: only able to allocate 16 MB for software IO TLB software IO TLB [mem 0x6b000000-0x6c000000] (16MB) mapped at [e3000000-e3ffffff] sh-pfc pfc-r8a7790: r8a77900_pfc support registered renesas_irqc renesas_irqc.0: driving 4 irqs No ATAGs? hw-breakpoint: Failed to enable monitor mode on CPU 0. xen:balloon: Initialising balloon driver xen_balloon: Initialising balloon driver SDHI0Vcc: Failed to request enable GPIO184: -517 reg-fixed-voltage reg-fixed-voltage.1: Failed to register regulator: -517 platform reg-fixed-voltage.1: Driver reg-fixed-voltage requests probe deferral SDHI2Vcc: Failed to request enable GPIO185: -517 reg-fixed-voltage reg-fixed-voltage.2: Failed to register regulator: -517 platform reg-fixed-voltage.2: Driver reg-fixed-voltage requests probe deferral gpio-regulator gpio-regulator.0: Could not obtain regulator setting GPIOs: -517 platform gpio-regulator.0: Driver gpio-regulator requests probe deferral gpio-regulator gpio-regulator.1: Could not obtain regulator setting GPIOs: -517 platform gpio-regulator.1: Driver gpio-regulator requests probe deferral SCSI subsystem initialized Linux video capture interface: v2.00 sh_cmt sh-cmt-48-gen2.0: ch0: used for clock events sh_cmt sh-cmt-48-gen2.0: ch0: used for periodic clock events sh_cmt sh-cmt-48-gen2.0: ch1: used as clock source Advanced Linux Sound Architecture Driver Initialized. Switched to clocksource sh-cmt-48-gen2.0 NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 1, 8192 bytes) UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) sh_cmt sh-cmt-48-gen2.0: ch0: used for oneshot clock events NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. futex hash table entries: 256 (order: -1, 3072 bytes) NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... io scheduler noop registered (default) gpio_rcar gpio_rcar.0: driving 32 GPIOs gpio_rcar gpio_rcar.1: driving 32 GPIOs gpio_rcar gpio_rcar.2: driving 32 GPIOs gpio_rcar gpio_rcar.3: driving 32 GPIOs gpio_rcar gpio_rcar.4: driving 32 GPIOs gpio_rcar gpio_rcar.5: driving 32 GPIOs xen:xen_evtchn: Event-channel device installed console [hvc0] enabled SuperH (H)SCI(F) driver initialized sh-sci.0: ttySC0 at MMIO 0xe6c40000 (irq = 176, base_baud = 0) is a scifa sh-sci.1: ttySC1 at MMIO 0xe6c50000 (irq = 177, base_baud = 0) is a scifa sh-sci.2: ttySC2 at MMIO 0xe6c20000 (irq = 180, base_baud = 0) is a scifb sh-sci.3: ttySC3 at MMIO 0xe6c30000 (irq = 181, base_baud = 0) is a scifb sh-sci.4: ttySC4 at MMIO 0xe6ce0000 (irq = 182, base_baud = 0) is a scifb sh-sci.5: ttySC5 at MMIO 0xe6c60000 (irq = 183, base_baud = 0) is a scifa sh-sci.6: ttySC6 at MMIO 0xe6e60000 (irq = 184, base_baud = 0) is a scif sh-sci.7: ttySC7 at MMIO 0xe6e68000 (irq = 185, base_baud = 0) is a scif sh-sci.8: ttySC8 at MMIO 0xe62c0000 (irq = 186, base_baud = 0) is a hscif sh-sci.9: ttySC9 at MMIO 0xe62c8000 (irq = 187, base_baud = 0) is a hscif [drm] Initialized drm 1.1.0 20060810 scsi host0: sata_rcar ata1: SATA max UDMA/133 irq 138 m25p80 spi0.0: s25fl512s (65536 Kbytes) Creating 3 MTD partitions on "m25p80": 0x000000000000-0x000000040000 : "loader" 0x000000040000-0x000000440000 : "user" 0x000000440000-0x000004000000 : "flash" renesas_spi qspi.0: probed libphy: sh_mii: probed sh-eth r8a7790-ether eth0: Base address at 0xee700000, 2e:09:0a:00:3d:d3, IRQ 194. xen_netfront: Initialising Xen virtual ethernet driver mousedev: PS/2 mouse device common for all mice i2c-rcar i2c-rcar_gen2.0: probed i2c-rcar i2c-rcar_gen2.1: probed i2c-rcar i2c-rcar_gen2.2: probed i2c-rcar i2c-rcar_gen2.3: probed soc-camera-pdrv soc-camera-pdrv.1: Probing soc-camera-pdrv.1 adv7180 2-0020: chip found @ 0x20 (i2c-rcar_gen2) rcar_thermal rcar_thermal: 1 sensor probed Driver 'mmcblk' needs updating - please use bus_type methods sh_mobile_sdhi sh_mobile_sdhi.0: No vmmc regulator found sh_mobile_sdhi sh_mobile_sdhi.0: No vqmmc regulator found platform sh_mobile_sdhi.0: Driver sh_mobile_sdhi requests probe deferral sh_mobile_sdhi sh_mobile_sdhi.2: No vmmc regulator found sh_mobile_sdhi sh_mobile_sdhi.2: No vqmmc regulator found platform sh_mobile_sdhi.2: Driver sh_mobile_sdhi requests probe deferral sh_mmcif sh_mmcif.1: No vqmmc regulator found sh_mmcif sh_mmcif.1: Chip version 0x0003, clock rate 12MHz asoc-simple-card asoc-simple-card: ASoC: CPU DAI rcar_sound not registered platform asoc-simple-card: Driver asoc-simple-card requests probe deferral rcar_sound rcar_sound: probed TCP: cubic registered NET: Registered protocol family 17 Key type dns_resolver registered mmc0: BKOPS_EN bit is not set mmc0: new high speed MMC card at address 0001 1DEBUG: Passed mmc_add_card 317 2DEBUG: Passed mmc_add_card 319 mmcblk0: mmc0:0001 MMC08G 7.32 GiB mmcblk0boot0: mmc0:0001 MMC08G partition 1 2.00 MiB mmcblk0boot1: mmc0:0001 MMC08G partition 2 2.00 MiB mmcblk0: p1 sh_mobile_sdhi sh_mobile_sdhi.0: mmc1 base at 0xee100000 clock rate 97 MHz ata1: link resume succeeded after 1 retries ata1: SATA link down (SStatus 0 SControl 300) sh_mobile_sdhi sh_mobile_sdhi.2: mmc2 base at 0xee140000 clock rate 48 MHz asoc-simple-card asoc-simple-card: ak4642-hifi <-> rcar_sound mapping ok input: gpio-keys as /devices/platform/gpio-keys/input/input0 �H�EXT4-fs (mmcblk0p1): error count since last fsck: 24 EXT4-fs (mmcblk0p1): initial error at time 11: mb_free_blocks:1450: inode 67523: block 296960 EXT4-fs (mmcblk0p1): last error at time 10: ext4_free_inode:340 Attachment:
r8a7790-lager-xen.dts _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |