|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [qemu-mainline test] 102070: regressions - trouble: broken/fail/pass
flight 102070 qemu-mainline real [real] http://logs.test-lab.xenproject.org/osstest/logs/102070/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: test-amd64-amd64-libvirt 11 guest-start fail REGR. vs. 101909 test-amd64-i386-libvirt 11 guest-start fail REGR. vs. 101909 test-amd64-i386-libvirt-pair 20 guest-start/debian fail REGR. vs. 101909 test-amd64-amd64-libvirt-xsm 11 guest-start fail REGR. vs. 101909 test-amd64-amd64-libvirt-vhd 9 debian-di-install fail REGR. vs. 101909 test-amd64-amd64-xl-qcow2 9 debian-di-install fail REGR. vs. 101909 test-amd64-i386-libvirt-xsm 11 guest-start fail REGR. vs. 101909 test-armhf-armhf-xl 15 guest-start/debian.repeat fail REGR. vs. 101909 test-amd64-amd64-libvirt-pair 20 guest-start/debian fail REGR. vs. 101909 test-armhf-armhf-libvirt-raw 9 debian-di-install fail REGR. vs. 101909 test-armhf-armhf-libvirt-xsm 11 guest-start fail REGR. vs. 101909 test-armhf-armhf-xl-vhd 9 debian-di-install fail REGR. vs. 101909 test-armhf-armhf-libvirt 11 guest-start fail REGR. vs. 101909 test-armhf-armhf-libvirt-qcow2 9 debian-di-install fail REGR. vs. 101909 Regressions which are regarded as allowable (not blocking): test-armhf-armhf-xl-rtds 3 host-install(3) broken REGR. vs. 101909 test-amd64-amd64-xl-qemuu-win7-amd64 16 guest-stop fail like 101909 test-amd64-i386-xl-qemuu-win7-amd64 16 guest-stop fail like 101909 test-amd64-amd64-xl-rtds 9 debian-install fail like 101909 Tests which did not succeed, but are not blocking: test-amd64-amd64-xl-pvh-intel 11 guest-start fail never pass test-amd64-amd64-xl-pvh-amd 11 guest-start fail never pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check fail never pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check fail never pass test-armhf-armhf-xl-xsm 12 migrate-support-check fail never pass test-armhf-armhf-xl-xsm 13 saverestore-support-check fail never pass test-amd64-amd64-qemuu-nested-amd 16 debian-hvm-install/l1/l2 fail never pass test-armhf-armhf-xl 12 migrate-support-check fail never pass test-armhf-armhf-xl 13 saverestore-support-check fail never pass test-armhf-armhf-xl-arndale 12 migrate-support-check fail never pass test-armhf-armhf-xl-arndale 13 saverestore-support-check fail never pass test-armhf-armhf-xl-cubietruck 12 migrate-support-check fail never pass test-armhf-armhf-xl-cubietruck 13 saverestore-support-check fail never pass test-armhf-armhf-xl-credit2 12 migrate-support-check fail never pass test-armhf-armhf-xl-credit2 13 saverestore-support-check fail never pass test-armhf-armhf-xl-multivcpu 12 migrate-support-check fail never pass test-armhf-armhf-xl-multivcpu 13 saverestore-support-check fail never pass version targeted for testing: qemuu 9b4b0350264d8164996265d635c8b9599673afb4 baseline version: qemuu 199a5bde46b0eab898ab1ec591f423000302569f Last test of basis 101909 2016-11-03 23:21:40 Z 6 days Failing since 101943 2016-11-04 22:40:48 Z 5 days 8 attempts Testing same since 102070 2016-11-09 14:41:39 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Christian Borntraeger <borntraeger@xxxxxxxxxx> Cornelia Huck <cornelia.huck@xxxxxxxxxx> Julian Brown <julian@xxxxxxxxxxxxxxxx> Kevin Wolf <kwolf@xxxxxxxxxx> Marcin Krzeminski <marcin.krzeminski@xxxxxxxxx> Olaf Hering <olaf@xxxxxxxxx> Paolo Bonzini <pbonzini@xxxxxxxxxx> Peter Maydell <peter.maydell@xxxxxxxxxx> Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx> Sander Eikelenboom <linux@xxxxxxxxxxxxxx> Stefan Hajnoczi <stefanha@xxxxxxxxxx> Stefano Stabellini <sstabellini@xxxxxxxxxx> Thomas Huth <thuth@xxxxxxxxxx> Wei Liu <wei.liu2@xxxxxxxxxx> jobs: build-amd64-xsm pass build-armhf-xsm pass build-i386-xsm pass build-amd64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-armhf-libvirt pass build-i386-libvirt pass build-amd64-pvops pass build-armhf-pvops pass build-i386-pvops pass test-amd64-amd64-xl pass test-armhf-armhf-xl fail test-amd64-i386-xl pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-libvirt-xsm fail test-armhf-armhf-libvirt-xsm fail test-amd64-i386-libvirt-xsm fail test-amd64-amd64-xl-xsm pass test-armhf-armhf-xl-xsm pass test-amd64-i386-xl-xsm pass test-amd64-amd64-qemuu-nested-amd fail test-amd64-amd64-xl-pvh-amd fail test-amd64-i386-qemuu-rhel6hvm-amd pass test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-freebsd10-amd64 pass test-amd64-amd64-xl-qemuu-ovmf-amd64 pass test-amd64-i386-xl-qemuu-ovmf-amd64 pass test-amd64-amd64-xl-qemuu-win7-amd64 fail test-amd64-i386-xl-qemuu-win7-amd64 fail test-armhf-armhf-xl-arndale pass test-amd64-amd64-xl-credit2 pass test-armhf-armhf-xl-credit2 pass test-armhf-armhf-xl-cubietruck pass test-amd64-i386-freebsd10-i386 pass test-amd64-amd64-qemuu-nested-intel pass test-amd64-amd64-xl-pvh-intel fail test-amd64-i386-qemuu-rhel6hvm-intel pass test-amd64-amd64-libvirt fail test-armhf-armhf-libvirt fail test-amd64-i386-libvirt fail test-amd64-amd64-xl-multivcpu pass test-armhf-armhf-xl-multivcpu pass test-amd64-amd64-pair pass test-amd64-i386-pair pass test-amd64-amd64-libvirt-pair fail test-amd64-i386-libvirt-pair fail test-amd64-amd64-amd64-pvgrub pass test-amd64-amd64-i386-pvgrub pass test-amd64-amd64-pygrub pass test-armhf-armhf-libvirt-qcow2 fail test-amd64-amd64-xl-qcow2 fail test-armhf-armhf-libvirt-raw fail test-amd64-i386-xl-raw pass test-amd64-amd64-xl-rtds fail test-armhf-armhf-xl-rtds broken test-amd64-i386-xl-qemuu-winxpsp3-vcpus1 pass test-amd64-amd64-libvirt-vhd fail test-armhf-armhf-xl-vhd fail test-amd64-amd64-xl-qemuu-winxpsp3 pass test-amd64-i386-xl-qemuu-winxpsp3 pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary broken-step test-armhf-armhf-xl-rtds host-install(3) Not pushing. ------------------------------------------------------------ commit 9b4b0350264d8164996265d635c8b9599673afb4 Merge: f70073d 3b0fc80 Author: Stefan Hajnoczi <stefanha@xxxxxxxxxx> Date: Wed Nov 9 12:44:16 2016 +0000 Merge remote-tracking branch 'public/tags/tracing-pull-request' into staging # gpg: Signature made Tue 08 Nov 2016 06:17:13 PM GMT # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@xxxxxxxxxx>" # gpg: aka "Stefan Hajnoczi <stefanha@xxxxxxxxx>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * public/tags/tracing-pull-request: docs/tracing.txt: Update documentation of default backend Message-id: 1478629053-31709-1-git-send-email-stefanha@xxxxxxxxxx Signed-off-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> commit f70073df4a562efafc2e245515837fba673efb3d Merge: 207faf2 35dd66e Author: Stefan Hajnoczi <stefanha@xxxxxxxxxx> Date: Wed Nov 9 12:43:50 2016 +0000 Merge remote-tracking branch 'public/tags/block-pull-request' into staging # gpg: Signature made Tue 08 Nov 2016 06:12:29 PM GMT # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@xxxxxxxxxx>" # gpg: aka "Stefan Hajnoczi <stefanha@xxxxxxxxx>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * public/tags/block-pull-request: aio-posix: simplify aio_epoll_update aio-posix: avoid NULL pointer dereference in aio_epoll_update block: Don't mark node clean after failed flush Message-id: 1478628762-31050-1-git-send-email-stefanha@xxxxxxxxxx Signed-off-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> commit 3b0fc80dd8ed9bd1ac738898e4fbd70c4a618925 Author: Peter Maydell <peter.maydell@xxxxxxxxxx> Date: Fri Nov 4 16:27:17 2016 +0000 docs/tracing.txt: Update documentation of default backend In commit baf86d6b3c we switched the default trace backend from "nop" to "log". Update the documentation to match. Signed-off-by: Peter Maydell <peter.maydell@xxxxxxxxxx> Message-id: 1478276837-31780-1-git-send-email-peter.maydell@xxxxxxxxxx Signed-off-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> commit 35dd66e23ce96283723de58e10d2877ae2be4a1b Author: Paolo Bonzini <pbonzini@xxxxxxxxxx> Date: Tue Nov 8 14:55:24 2016 +0100 aio-posix: simplify aio_epoll_update Extract common code out of the "if". Reviewed-by: Fam Zheng <famz@xxxxxxxxxx> Signed-off-by: Paolo Bonzini <pbonzini@xxxxxxxxxx> Message-id: 20161108135524.25927-3-pbonzini@xxxxxxxxxx Signed-off-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> commit 36173ec5f1d3baee62504affd761199693c14c82 Author: Paolo Bonzini <pbonzini@xxxxxxxxxx> Date: Tue Nov 8 14:55:23 2016 +0100 aio-posix: avoid NULL pointer dereference in aio_epoll_update aio_epoll_update dereferences parameter "node", but it could have been NULL if deleting an fd handler that was not registered in the first place. Signed-off-by: Paolo Bonzini <pbonzini@xxxxxxxxxx> Reviewed-by: Fam Zheng <famz@xxxxxxxxxx> Message-id: 20161108135524.25927-2-pbonzini@xxxxxxxxxx Signed-off-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> commit e6af1e085416378918cca357bf2abd8b90224667 Author: Kevin Wolf <kwolf@xxxxxxxxxx> Date: Sat Nov 5 00:03:15 2016 +0100 block: Don't mark node clean after failed flush Commit 3ff2f67a changed bdrv_co_flush() so that no flush is issues if the image hasn't been dirtied since the last flush. This is not quite correct: The condition should be that the image hasn't been dirtied since the last _successful_ flush. This patch changes the logic accordingly. Without this fix, subsequent bdrv_co_flush() calls would return success without actually doing anything even though the image is still dirty. The difference is visible in some blkdebug test cases where error messages incorrectly disappeared after commit 3ff2f67a. Cc: qemu-stable@xxxxxxxxxx Signed-off-by: Kevin Wolf <kwolf@xxxxxxxxxx> Reviewed-by: Denis V. Lunev <den@xxxxxxxxxx> Reviewed-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> Reviewed-by: John Snow <jsnow@xxxxxxxxxx> Message-id: 1478300595-10090-1-git-send-email-kwolf@xxxxxxxxxx Signed-off-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> commit 207faf24c58859f5240f66bf6decc33b87a1776e Merge: 0ea3eb6 9706e01 Author: Stefan Hajnoczi <stefanha@xxxxxxxxxx> Date: Mon Nov 7 14:02:15 2016 +0000 Merge remote-tracking branch 'pm215/tags/pull-target-arm-20161107' into staging target-arm queue: * bitbang_i2c: Handle NACKs from devices * Fix corruption of CPSR when SCTLR.EE is set * nvic: set pending status for not active interrupts * char: cadence: check baud rate generator and divider values # gpg: Signature made Mon 07 Nov 2016 10:43:07 AM GMT # gpg: using RSA key 0x3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@xxxxxxxxxx>" # gpg: aka "Peter Maydell <pmaydell@xxxxxxxxx>" # gpg: aka "Peter Maydell <pmaydell@xxxxxxxxxxxxxxxxxxxxxx>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * pm215/tags/pull-target-arm-20161107: hw/i2c/bitbang_i2c: Handle NACKs from devices Fix corruption of CPSR when SCTLR.EE is set nvic: set pending status for not active interrupts char: cadence: check baud rate generator and divider values Message-id: 1478515653-6361-1-git-send-email-peter.maydell@xxxxxxxxxx Signed-off-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> commit 0ea3eb65e84c5d4665dbeee3e3e5ed56b43f7648 Author: Cornelia Huck <cornelia.huck@xxxxxxxxxx> Date: Wed Nov 2 17:21:03 2016 +0100 s390x/kvm: fix run_on_cpu sigp conversions Commit 14e6fe12a ("*_run_on_cpu: introduce run_on_cpu_data type") attempted to convert all users of run_on_cpu to use the new run_on_cpu_data type. It missed to change the called sigp_* routines, however. Fix that. Fixes: 14e6fe12a ("*_run_on_cpu: introduce run_on_cpu_data type") Signed-off-by: Cornelia Huck <cornelia.huck@xxxxxxxxxx> Acked-by: Christian Borntraeger <borntraeger@xxxxxxxxxx> Message-id: 20161102162103.66480-1-cornelia.huck@xxxxxxxxxx Signed-off-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> commit 9706e0162d2405218fd7376ffdf13baed8569a4b Author: Peter Maydell <peter.maydell@xxxxxxxxxx> Date: Mon Oct 24 19:12:29 2016 +0100 hw/i2c/bitbang_i2c: Handle NACKs from devices If the guest attempts to talk to a nonexistent device over i2c, the i2c_start_transfer() function will return non-zero, indicating that the bus is signalling a NACK. Similarly, if the i2c_send() function returns nonzero then the target device returned a NACK. Handle this possibility in the bitbang_i2c code, by returning the state machine to the STOPPED state and returning the NACK bit to the guest. This bit of missing functionality was spotted by Coverity (it noticed that we weren't checking the return value from i2c_start_transfer()). Signed-off-by: Peter Maydell <peter.maydell@xxxxxxxxxx> Message-id: 1477332749-27098-1-git-send-email-peter.maydell@xxxxxxxxxx commit 3823b9db77e753041c04c161ac9f4d4cfc661520 Author: Julian Brown <julian@xxxxxxxxxxxxxxxx> Date: Mon Nov 7 10:00:24 2016 +0000 Fix corruption of CPSR when SCTLR.EE is set Fix a typo in arm_cpu_do_interrupt_aarch32 (OR'ing with ~CPSR_E instead of CPSR_E) which meant that when we took an interrupt with SCTLR.EE set we would corrupt the CPSR. Signed-off-by: Julian Brown <julian@xxxxxxxxxxxxxxxx> Reviewed-by: Peter Maydell <peter.maydell@xxxxxxxxxx> Signed-off-by: Peter Maydell <peter.maydell@xxxxxxxxxx> commit 3bc4b52ccd7754de4fb177871f1c5eaaa61ec7ef Author: Marcin Krzeminski <marcin.krzeminski@xxxxxxxxx> Date: Mon Nov 7 10:00:24 2016 +0000 nvic: set pending status for not active interrupts According to ARM DUI 0552A 4.2.10. NVIC set pending status also for disabled interrupts. Correct the logic for when interrupts are marked pending both on input level transition and when interrupts are dismissed, to match the NVIC behaviour rather than the 11MPCore GIC. Signed-off-by: Marcin Krzeminski <marcin.krzeminski@xxxxxxxxx> Reviewed-by: Peter Maydell <peter.maydell@xxxxxxxxxx> Signed-off-by: Peter Maydell <peter.maydell@xxxxxxxxxx> commit 6e29651c5e3a0e0336818574f273b3f6ecea491d Author: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx> Date: Mon Nov 7 10:00:24 2016 +0000 char: cadence: check baud rate generator and divider values The Cadence UART device emulator calculates speed by dividing the baud rate by a 'baud rate generator' & 'baud rate divider' value. The device specification defines these register values to be non-zero and within certain limits. Add checks for these limits to avoid errors like divide by zero. Reported-by: Huawei PSIRT <psirt@xxxxxxxxxx> Signed-off-by: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx> Reviewed-by: Alistair Francis <alistair.francis@xxxxxxxxxx> Message-id: 1477596278-1470-1-git-send-email-ppandit@xxxxxxxxxx Signed-off-by: Peter Maydell <peter.maydell@xxxxxxxxxx> commit 9226682a401f34b10fd79dfe17ba334da0800747 Merge: 199a5bd 021746c Author: Stefan Hajnoczi <stefanha@xxxxxxxxxx> Date: Fri Nov 4 09:26:24 2016 +0000 Merge remote-tracking branch 'sstabellini/tags/xen-20161102-tag' into staging Xen 2016/11/02 # gpg: Signature made Wed 02 Nov 2016 07:28:40 PM GMT # gpg: using RSA key 0x894F8F4870E1AE90 # gpg: Good signature from "Stefano Stabellini <sstabellini@xxxxxxxxxx>" # gpg: aka "Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>" # Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90 * sstabellini/tags/xen-20161102-tag: PCMachineState: introduce acpi_build_enabled field hw/xen/xen_pvdev: Include qemu/log.h for qemu_log_vprintf() Message-id: alpine.DEB.2.10.1611021227530.19454@sstabellini-ThinkPad-X260 Signed-off-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx> commit 021746c131cdfeab9d82ff918795a9f18d20d7ae Author: Wei Liu <wei.liu2@xxxxxxxxxx> Date: Tue Nov 1 17:44:16 2016 +0000 PCMachineState: introduce acpi_build_enabled field Introduce this field to control whether ACPI build is enabled by a particular machine or accelerator. It defaults to true if the machine itself supports ACPI build. Xen accelerator will disable it because Xen is in charge of building ACPI tables for the guest. Signed-off-by: Wei Liu <wei.liu2@xxxxxxxxxx> Signed-off-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> Reviewed-by: Eduardo Habkost <ehabkost@xxxxxxxxxx> Tested-by: Sander Eikelenboom <linux@xxxxxxxxxxxxxx> commit b5863634181a655bd2201cf51a363ac94a43f145 Author: Thomas Huth <thuth@xxxxxxxxxx> Date: Wed Nov 2 11:19:18 2016 +0100 hw/xen/xen_pvdev: Include qemu/log.h for qemu_log_vprintf() Olaf Hering reported a build failure due to an undefined reference to 'qemu_log_vprintf'. Explicitely including qemu/log.h seems to fix the issue. Signed-off-by: Thomas Huth <thuth@xxxxxxxxxx> Signed-off-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> Acked-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> Tested-by: Olaf Hering <olaf@xxxxxxxxx> _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |