[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v4] xen/arm: Add a clock property





On 20/07/16 12:49, Geert Uytterhoeven wrote:
Hi Julien,

On Wed, Jul 20, 2016 at 1:01 PM, Julien Grall <julien.grall@xxxxxxx> wrote:
On 20/07/16 10:43, Geert Uytterhoeven wrote:
On Tue, Jul 12, 2016 at 9:46 AM, Dirk Behme <dirk.behme@xxxxxxxxxxxx>
wrote:

Clocks described by this property are reserved for use by Xen, and the OS
must not alter their state any way, such as disabling or gating a clock,
or modifying its rate. Ensuring this may impose constraints on parent
clocks or other resources used by the clock tree.

This property is used to proxy clocks for devices Xen has taken ownership
of, such as UARTs, for which the associated clock controller(s) remain
under the control of Dom0.


I'm not familiar with using XEN at all, but I'm a bit puzzled...

Can't you just add a clocks property to the (virtual) serial device node
in DT?
Then the (virtual) serial device driver can get and enable the clock?

There is no DT node for the Xen console (hvc). The UART used by Xen will be
completely removed from the Device tree.

Why is it removed?

Because the device is used exclusively by Xen and DOM0 should not touch it at all (IRQs and MMIOs are not mapped).

Regards,

--
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.