[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v3] xen/arm: enable clocks used by the hypervisor





On 08/07/16 11:40, Dirk Behme wrote:
Hi Michael and Julien,

On 08.07.2016 11:34, Julien Grall wrote:
Hi Dirk,

On 08/07/16 08:44, Dirk Behme wrote:
Xen hypervisor drivers might replace native OS drivers. The result is
that some important clocks that are enabled by the OS in the non-Xen
case are not properly enabled in the presence of Xen. The clocks
property enumerates the clocks that must be enabled by the Xen clock
consumer.

An example is a serial driver enabled by the hypervisor. Xen must

I would say "An example is the UART used by the hypervisor."

consume and enable these clocks in the OS to ensure behavior continues
after firmware configures the UART hardware and corresponding clock
harder.

What do you mean by "harder"?

Also, relying on DOM0 to enable the clock looks very wrong to me and you
give an example which prove that. The UART will be used before hand by
Xen, however it will not be possible to use it if you expect DOM0 to
enable the clock (or even modify the clock frequency).

The clock should be enabled either by the firmware or Xen. But not DOM0.
DOM0 should not touch this clock at all.

Furthermore, this property could be used for clock associated to device
that will be passthrough-ed to a guest. In this case, the clock would be
enabled even if the device is not in use which will result more power
consumption.


I took the description directly from Michael's proposal

http://www.spinics.net/lists/arm-kernel/msg516576.html

Would it be possible that you two experts agree on the exact wording you
like to see?

I think the wording suggested by Mark in [1] represents better what we would like to achieve with this property.

Regards,

[1] https://www.spinics.net/lists/arm-kernel/msg516158.html

--
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.