Re: [Xen-devel] [PATCH v2] xen/arm: register clocks used by the hypervisor

[Stefano Stabellini <sstabellini@xxxxxxxxxx>]

On Thu, 30 Jun 2016, Dirk Behme wrote:
> Some clocks might be used by the Xen hypervisor and not by the Linux
> kernel. If these are not registered by the Linux kernel, they might be
> disabled by clk_disable_unused() as the kernel doesn't know that they
> are used. The clock of the serial console handled by Xen is one
> example for this. It might be disabled by clk_disable_unused() which
> stops the whole serial output, even from Xen, then.
> 
> Up to now, the workaround for this has been to use the Linux kernel
> command line parameter 'clk_ignore_unused'. See Xen bug
> 
> http://bugs.xenproject.org/xen/bug/45
> 
> too.
> 
> To fix this, we will add the "unused" clocks in Xen to the hypervisor
> node. The Linux kernel has to register the clocks from the hypervisor
> node, then.
> 
> Therefore, check if there is a "clocks" entry in the hypervisor node
> and if so register the given clocks to the Linux kernel clock
> framework and with this mark them as used. This prevents the clocks
> from being disabled.
> 
> Signed-off-by: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
> ---
> Changes in v2:
>  - Rebase against git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git 
> for-linus-4.8
>  - Add changes to Documentation/devicetree/bindings/arm/xen.txt
> 
>  Documentation/devicetree/bindings/arm/xen.txt | 11 +++++++
>  arch/arm/xen/enlighten.c                      | 47 
> +++++++++++++++++++++++++++
>  2 files changed, 58 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/xen.txt 
> b/Documentation/devicetree/bindings/arm/xen.txt
> index c9b9321..55dfd3b 100644
> --- a/Documentation/devicetree/bindings/arm/xen.txt
> +++ b/Documentation/devicetree/bindings/arm/xen.txt
> @@ -17,6 +17,17 @@ the following properties:
>    A GIC node is also required.
>    This property is unnecessary when booting Dom0 using ACPI.
>  
> +Optional properties:
> +
> +- clocks: one or more clocks to be registered.
> +  Xen hypervisor drivers might replace native drivers, resulting in
> +  clocks not registered by these native drivers. To avoid that these
> +  unregistered clocks are disabled, then, e.g. by clk_disable_unused(),
> +  register them in the hypervisor node.
> +  An example for this are the clocks of the serial driver. If the clocks
> +  used by the serial hardware interface are not registered by the serial
> +  driver the serial output might stop once clk_disable_unused() is called.

What if we use the "status" property of the clocks? Could we set it to
"disabled" in Xen? Would that be enough for Linux to leave them alone?


>  To support UEFI on Xen ARM virtual platforms, Xen populates the FDT "uefi" 
> node
>  under /hypervisor with following parameters:
>  
> diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
> index 47acb36..5c546d0 100644
> --- a/arch/arm/xen/enlighten.c
> +++ b/arch/arm/xen/enlighten.c
> @@ -24,6 +24,7 @@
>  #include <linux/of_fdt.h>
>  #include <linux/of_irq.h>
>  #include <linux/of_address.h>
> +#include <linux/clk-provider.h>
>  #include <linux/cpuidle.h>
>  #include <linux/cpufreq.h>
>  #include <linux/cpu.h>
> @@ -444,6 +445,52 @@ static int __init xen_pm_init(void)
>  }
>  late_initcall(xen_pm_init);
>  
> +/*
> + * Check if we want to register some clocks, that they
> + * are not freed because unused by clk_disable_unused().
> + * E.g. the serial console clock.
> + */
> +static int __init xen_arm_register_clks(void)
> +{
> +     struct clk *clk;
> +     struct device_node *xen_node;
> +     unsigned int i, count;
> +     int ret = 0;
> +
> +     xen_node = of_find_compatible_node(NULL, NULL, "xen,xen");
> +     if (!xen_node) {
> +             pr_err("Xen support was detected before, but it has 
> disappeared\n");
> +             return -EINVAL;
> +     }
> +
> +     count = of_clk_get_parent_count(xen_node);
> +     if (!count)
> +             goto out;
> +
> +     for (i = 0; i < count; i++) {
> +             clk = of_clk_get(xen_node, i);
> +             if (IS_ERR(clk)) {
> +                     pr_err("Xen failed to register clock %i. Error: %li\n",
> +                            i, PTR_ERR(clk));
> +                     ret = PTR_ERR(clk);
> +                     goto out;
> +             }
> +
> +             ret = clk_prepare_enable(clk);
> +             if (ret < 0) {
> +                     pr_err("Xen failed to enable clock %i. Error: %i\n",
> +                            i, ret);
> +                     goto out;
> +             }
> +     }
> +
> +     ret = 0;
> +
> +out:
> +     of_node_put(xen_node);
> +     return ret;
> +}
> +late_initcall(xen_arm_register_clks);
>  
>  /* empty stubs */
>  void xen_arch_pre_suspend(void) { }
> -- 
> 2.8.0
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel