[Xen-devel] [PATCH V7 2/3] drivers/pl011: Use combination of UARTRIS and UARTMSC instead of UARTMIS

[Shanker Donthineni <shankerd@xxxxxxxxxxxxxx>]

The Masked interrupt status register (UARTMIS) is not described in ARM
SBSA 2.x document. Anding of two registers UARTMSC and UARTRIS values
gives the same information as register UARTMIS.

UARTRIS, UARTMSC and UARTMIS definitions are found in PrimeCell UART
PL011 (Revision: r1p4).
 - 3.3.10 Interrupt mask set/clear register, UARTIMSC
 - 3.3.11 Raw interrupt status register, UARTRIS
 - 3.3.12 Masked interrupt status register, UARTMIS

This change is necessary for driver to be SBSA compliant v2.x without
affecting the current driver functionality.

Signed-off-by: Shanker Donthineni <shankerd@xxxxxxxxxxxxxx>
---
Changes since v1:
 Added a new function to return an interrupt status.

 xen/drivers/char/pl011.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/xen/drivers/char/pl011.c b/xen/drivers/char/pl011.c
index 6a3c21b..86fc463 100644
--- a/xen/drivers/char/pl011.c
+++ b/xen/drivers/char/pl011.c
@@ -50,14 +50,21 @@ static struct pl011 {
 #define PARITY_MARK  (PEN|SPS)
 #define PARITY_SPACE (PEN|EPS|SPS)
 
+/* To compatible with SBSA v2.x document, all accesses should be 32-bit */
 #define pl011_read(uart, off)           readl((uart)->regs + (off))
 #define pl011_write(uart, off,val)      writel((val), (uart)->regs + (off))
 
+static unsigned int pl011_intr_status(struct pl011 *uart)
+{
+    /* UARTMIS is not documented in SBSA v2.x, so using UARTRIS/UARTIMSC */
+    return ( pl011_read(uart, RIS) & pl011_read(uart, IMSC) );
+}
+
 static void pl011_interrupt(int irq, void *data, struct cpu_user_regs *regs)
 {
     struct serial_port *port = data;
     struct pl011 *uart = port->uart;
-    unsigned int status = pl011_read(uart, MIS);
+    unsigned int status = pl011_intr_status(uart);
 
     if ( status )
     {
@@ -76,7 +83,7 @@ static void pl011_interrupt(int irq, void *data, struct 
cpu_user_regs *regs)
             if ( status & (TXI) )
                 serial_tx_interrupt(port, regs);
 
-            status = pl011_read(uart, MIS);
+            status = pl011_intr_status(uart);
         } while (status != 0);
     }
 }
-- 
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc. 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, 
a Linux Foundation Collaborative Project


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel