[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [edk2] OVMF broken under Xen (in PCI initialisation)



On Wed, Apr 27, 2016 at 07:18:21AM +0000, Ni, Ruiyu wrote:
> Gary,
> In PciEnumeratorLight(), please directly assign 0 to MinBus when
> Configuration() returns error, instead of calling PciGetBusRange() to
> extract MinBus from the descriptors returned from Configuration().
> 
OK, I ignored PciGetBusRange() and the check of the return status of
Configuration(). Since MinBus is already initialized, I don't bother to
change the value anyway. The change is attached.

And yes, this time the shell showed.

Thanks,

Gary Lin

> Regards,
> Ray
> 
> >-----Original Message-----
> >From: Gary Lin [mailto:glin@xxxxxxxx]
> >Sent: Wednesday, April 27, 2016 2:54 PM
> >To: Ni, Ruiyu <ruiyu.ni@xxxxxxxxx>
> >Cc: edk2-devel@xxxxxxxxxxxx; Xen Devel <xen-devel@xxxxxxxxxxxxx>
> >Subject: Re: [edk2] OVMF broken under Xen (in PCI initialisation)
> >
> >On Wed, Apr 27, 2016 at 05:39:40AM +0000, Ni, Ruiyu wrote:
> >>
> >>
> >> Regards,
> >> Ray
> >>
> >> >-----Original Message-----
> >> >From: Gary Lin [mailto:glin@xxxxxxxx]
> >> >Sent: Wednesday, April 27, 2016 12:29 PM
> >> >To: Ni, Ruiyu <ruiyu.ni@xxxxxxxxx>
> >> >Cc: edk2-devel@xxxxxxxxxxxx; Xen Devel <xen-devel@xxxxxxxxxxxxx>
> >> >Subject: Re: [edk2] OVMF broken under Xen (in PCI initialisation)
> >> >
> >> >On Tue, Apr 26, 2016 at 09:40:42AM +0000, Ni, Ruiyu wrote:
> >> >> Gary,
> >> >> I can reproduce the issue and have debugged to get the reason.
> >> >> In MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumeratorSupport.c:
> >> >> PciEnumeratorLight() calls PciRootBridgeIo->Configuration()
> >> >> while the Configuration returns EFI_UNSUPPORTED resulting
> >> >> the PciBus driver exits earlier.
> >> >> You could try to manually set MinBus to 0 and MaxBus to 0xFF.
> >> >>
> >> >Do you mean to set MinBus and MaxBus in PciGetBusRange() ?
> >> >Should I also keep the EFI_UNSUPPORTED code in Configuration() ?
> >> Keep returning EFI_UNSUPPORTED in Configuration() and set
> >> MinBus/MaxBus in PciGetBusRange().
> >>
> >> >
> >> >> The second change you need to make is in PciIo.c:
> >> >> Change GetMmioAddressTranslationOffset() to return 0 instead
> >> >> of -1 when error occurs
> >> >>
> >> >
> >> >Should I also remove "ASSERT (FALSE);" ?
> >>
> >>
> >> ASSERT() won't be hit.
> >>
> >It didn't work (see my attached patch) :(
> >BTW, if Configuration() already returns EFI_UNSUPPORTED, then there is
> >no way to invoke PciGetBusRange(). Besides, MaxBus was never used in
> >PciEnumeratorLight(), so it's meaningless to assign any value to it.
> >
> >Cheers,
> >
> >Gary Lin
> >
> >> >
> >> >Cheers,
> >> >
> >> >Gary Lin
> >> >
> >> >> With the above 2 changes, can you check whether the system can
> >> >> boot?
> >> >>
> >> >> If it can boot, then we need to think about what the proper fix is.
> >> >> For OVMF above Xen, the PCI resources are assigned by Xen other than
> >> >> PciBus driver. So PciRootBridgeIo->Configuration() doesn't know
> >> >> the resource assignment information.
> >> >> With old PciHostBridge driver, the Configuration() returns BUS resource
> >> >> descriptor with MinBus = MaxBus = 0 (default value), so that the PciBus
> >> >> driver can detect all devices in BUS 0, but I guess devices in BUS 1+ 
> >> >> cannot
> >> >> be detected.
> >> >>
> >> >> Does Xen pass the resource assignment information through some memory
> >> >> blob to firmware? If yes, we could think about let PciHostBridgeLib 
> >> >> pass that
> >> >> information to PciHostBridge driver. If no, we also could let 
> >> >> PciHostBridgeLib
> >> >> collect the information (IO/MEM/BUS resource assignment) and pass that
> >> >> to PciHostBridgeDxe driver.
> >> >>
> >> >> And we need to have a way to tell PciHostBridgeDxe the resource 
> >> >> information
> >> >> passed from PciHostBridgeLib is available resource to assign, or 
> >> >> already allocated.
> >> >> Maybe just depends on the PcdPciBusDisableEnumeration. still thinking.
> >> >>
> >> >>
> >> >> Regards,
> >> >> Ray
> >> >>
> >> >> >-----Original Message-----
> >> >> >From: Gary Lin [mailto:glin@xxxxxxxx]
> >> >> >Sent: Tuesday, April 26, 2016 4:40 PM
> >> >> >To: Ni, Ruiyu <ruiyu.ni@xxxxxxxxx>
> >> >> >Cc: edk2-devel@xxxxxxxxxxxx; Xen Devel <xen-devel@xxxxxxxxxxxxx>
> >> >> >Subject: Re: [edk2] OVMF broken under Xen (in PCI initialisation)
> >> >> >
> >> >> >On Tue, Apr 26, 2016 at 08:19:49AM +0000, Ni, Ruiyu wrote:
> >> >> >> Gary,
> >> >> >> Maybe the system boots to Shell well but the video isn't initialized 
> >> >> >> properly.
> >> >> >> Can you build the firmware using "-D DEBUG_ON_SERIAL_PORT" switch and
> >> >> >> give me the boot log?
> >> >> >>
> >> >> >Hi Ray,
> >> >> >
> >> >> >I already did and it's how I make the firmware spit the log :-(
> >> >> >
> >> >> >Thanks,
> >> >> >
> >> >> >Gary Lin
> >> >> >
> >> >> >> Regards,
> >> >> >> Ray
> >> >> >>
> >> >> >> From: Gary Lin [mailto:glin@xxxxxxxx]
> >> >> >> Sent: Tuesday, April 26, 2016 3:35 PM
> >> >> >> To: Ni, Ruiyu <ruiyu.ni@xxxxxxxxx>
> >> >> >> Cc: Anthony PERARD <anthony.perard@xxxxxxxxxx>; 
> >> >> >> edk2-devel@xxxxxxxxxxxx; Xen Devel <xen-devel@xxxxxxxxxxxxx>
> >> >> >> Subject: Re: [edk2] OVMF broken under Xen (in PCI initialisation)
> >> >> >>
> >> >> >> On Tue, Apr 26, 2016 at 06:43:56AM +0000, Ni, Ruiyu wrote:
> >> >> >> >
> >> >> >> >
> >> >> >> > Regards,
> >> >> >> > Ray
> >> >> >> >
> >> >> >> > >-----Original Message-----
> >> >> >> > >From: edk2-devel [mailto:edk2-devel-bounces@xxxxxxxxxxxx] On 
> >> >> >> > >Behalf Of Anthony PERARD
> >> >> >> > >Sent: Friday, April 22, 2016 10:48 PM
> >> >> >> > >To: edk2-devel@xxxxxxxxxxxx<mailto:edk2-devel@xxxxxxxxxxxx>
> >> >> >> > >Cc: Xen Devel 
> >> >> >> > ><xen-devel@xxxxxxxxxxxxx<mailto:xen-devel@xxxxxxxxxxxxx>>
> >> >> >> > >Subject: [edk2] OVMF broken under Xen (in PCI initialisation)
> >> >> >> > >
> >> >> >> > >Hi,
> >> >> >> > >
> >> >> >> > >Following the switch to MdeModulePkg/Bus/Pci/PciHostBridgeDxe, 
> >> >> >> > >the pci root
> >> >> >> > >bridge does not finish to initialize and breaks under Xen.
> >> >> >> > >
> >> >> >> > >There are several issue probably due to the use of
> >> >> >> > >PcdPciDisableBusEnumeration=TRUE.
> >> >> >> > >
> >> >> >> > >First one:
> >> >> >> > >ASSERT 
> >> >> >> > >MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c(99): 
> >> >> >> > >Bridge->Mem.Limit <
> >> >> >0x0000000100000000ULL
> >> >> >> > >
> >> >> >> > >This patch would fix the first assert:
> >> >> >> > >diff --git a/OvmfPkg/PlatformPei/Xen.c b/OvmfPkg/PlatformPei/Xen.c
> >> >> >> > >index 7fa9019..15ec7a7 100644
> >> >> >> > >--- a/OvmfPkg/PlatformPei/Xen.c
> >> >> >> > >+++ b/OvmfPkg/PlatformPei/Xen.c
> >> >> >> > >@@ -227,5 +227,11 @@ InitializeXen (
> >> >> >> > >
> >> >> >> > >   PcdSetBool (PcdPciDisableBusEnumeration, TRUE);
> >> >> >> > >
> >> >> >> > >+  // Values from hvmloader
> >> >> >> > >+#define PCI_MEM_END         0xFC000000
> >> >> >> > >+#define HVM_BELOW_4G_MMIO_START 0xF0000000
> >> >> >> > >+  PcdSet64 (PcdPciMmio32Base, HVM_BELOW_4G_MMIO_START);
> >> >> >> > >+  PcdSet64 (PcdPciMmio32Size, PCI_MEM_END - 
> >> >> >> > >HVM_BELOW_4G_MMIO_START);
> >> >> >> > >+
> >> >> >> > >   return EFI_SUCCESS;
> >> >> >> > > }
> >> >> >> > >
> >> >> >> > >
> >> >> >> > >But that not enough, next assert is:
> >> >> >> > >ASSERT MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c(807): 
> >> >> >> > >RootBridge != ((void *) 0)
> >> >> >> > >
> >> >> >> > >I have worked around this one with the following patch. That would
> >> >> >> > >correspond to how the former implementation in OvmfPkg was 
> >> >> >> > >initializing the
> >> >> >> > >struct. Maybe a better way would be to fill ResAllocated under 
> >> >> >> > >Xen,
> >> >> >> > >somehow. Under Xen, the ResAllocNode status is not allocated, so 
> >> >> >> > >no
> >> >> >> > >Descriptor are created.
> >> >> >> > >
> >> >> >> > >diff --git 
> >> >> >> > >a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
> >> >> >> > >b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
> >> >> >> > >index cda9b49..eda92b6 100644
> >> >> >> > >--- a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
> >> >> >> > >+++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
> >> >> >> > >@@ -1509,15 +1509,13 @@ RootBridgeIoConfiguration (
> >> >> >> > >
> >> >> >> > >     ResAllocNode = &RootBridge->ResAllocNode[Index];
> >> >> >> > >
> >> >> >> > >-    if (ResAllocNode->Status != ResAllocated) {
> >> >> >> > >-      continue;
> >> >> >> > >-    }
> >> >> >> > >-
> >> >> >> > >     Descriptor->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR;
> >> >> >> > >     Descriptor->Len  = sizeof 
> >> >> >> > > (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) - 3;
> >> >> >> > >+    if (ResAllocNode->Status != ResAllocated) {
> >> >> >> > >     Descriptor->AddrRangeMin  = ResAllocNode->Base;
> >> >> >> > >     Descriptor->AddrRangeMax  = ResAllocNode->Base + 
> >> >> >> > > ResAllocNode->Length - 1;
> >> >> >> > >     Descriptor->AddrLen       = ResAllocNode->Length;
> >> >> >> > >+    }
> >> >> >> > >     switch (ResAllocNode->Type) {
> >> >> >> > >
> >> >> >> > I think a more proper fix is to return EFI_UNSUPPORTED without 
> >> >> >> > returning any
> >> >> >> > descriptors when the PcdPciDisableBusEnumeration is TRUE.
> >> >> >> > Per UEFI Spec, EFI_UNSUPPORTED means "The current configuration of 
> >> >> >> > this PCI
> >> >> >> > root bridge could not be retrieved." It's true when the PCD is 
> >> >> >> > true.
> >> >> >> >
> >> >> >> > >
> >> >> >> > >That leads to one last assert:
> >> >> >> > >> QemuVideo: Cirrus 5446 detected
> >> >> >> > >> InstallProtocolInterface: 09576E91-6D3F-11D2-8E39-00A0C969723B 
> >> >> >> > >> 7B9EF598
> >> >> >> > >> Adding Mode 0 as Cirrus Internal Mode 0: 640x480, 32-bit, 60 Hz
> >> >> >> > >> Adding Mode 1 as Cirrus Internal Mode 1: 800x600, 32-bit, 60 Hz
> >> >> >> > >> Adding Mode 2 as Cirrus Internal Mode 2: 1024x768, 24-bit, 60 Hz
> >> >> >> > >> PixelBlueGreenRedReserved8BitPerColor
> >> >> >> > >> ASSERT 
> >> >> >> > >> /local/home/sheep/work/ovmf/MdeModulePkg/Bus/Pci/PciBusDxe/PciIo.c(1789):
> >> >> >> > >>  ((BOOLEAN)(0==1))
> >> >> >> > >For this one, I've workaround by reverting patch 7b0a1ea
> >> >> >> > >(MdeModuelPkg/PciBus: Return AddrTranslationOffset in 
> >> >> >> > >GetBarAttributes).
> >> >> >> > >That issue was introduce while still using the USE_OLD_PCI_HOST.
> >> >> >> > >
> >> >> >> > >Any idee or pointer on how to fix those issues ?
> >> >> >> >
> >> >> >> > When the PciRootBridgeIo.Configuration() returns EFI_UNSUPPORTED, 
> >> >> >> > this assertion
> >> >> >> > can be fixed as well. Correct?
> >> >> >>
> >> >> >> I tried to make RootBridgeIoConfiguration() return EFI_UNSUPPORTED
> >> >> >> (see the attachment), and those asserts were gone. However, the 
> >> >> >> system
> >> >> >> stuck somewhere after loading shell.efi. Here are the messages from 
> >> >> >> the
> >> >> >> debug log:
> >> >> >>
> >> >> >> BdsLibConnectAll
> >> >> >> Select Item: 0xE
> >> >> >> Memory  Previous  Current    Next
> >> >> >>  Type    Pages     Pages     Pages
> >> >> >> ======  ========  ========  ========
> >> >> >>   0A    00000004  00000001  00000004
> >> >> >>   09    00000008  00000011  00000015
> >> >> >>   00    00000004  00000001  00000004
> >> >> >>   06    00000024  00000057  0000006C
> >> >> >>   05    00000030  00000063  0000007B
> >> >> >>   03    00000180  0000048D  000005B0
> >> >> >>   04    00000F00  00000B65  00000F00
> >> >> >> Booting EFI Internal Shell
> >> >> >> InstallProtocolInterface: 5B1B31A1-9562-11D2-8E3F-00A0C969723B 
> >> >> >> 3EA580C0
> >> >> >> Loading driver at 0x0003E03F000 EntryPoint=0x0003E03F240 Shell.efi
> >> >> >> InstallProtocolInterface: BC62157E-3E33-4FEC-9920-2D3B36D750DF 
> >> >> >> 3EA58B98
> >> >> >> InstallProtocolInterface: 387477C2-69C7-11D2-8E39-00A0C969723B 
> >> >> >> 3EA54320
> >> >> >> InstallProtocolInterface: 752F3136-4E16-4FDC-A22A-E5F46812F4CA 
> >> >> >> 3EA53CD8
> >> >> >> InstallProtocolInterface: 6302D008-7F9B-4F30-87AC-60C9FEF5DA4E 
> >> >> >> 3E16B580
> >> >> >>
> >> >> >> I couldn't find out where it stuck unless there is a way to attach 
> >> >> >> gdb
> >> >> >> to Xen HVM for source level debugging :-(
> >> >> >>
> >> >> >> Thanks,
> >> >> >>
> >> >> >> Gary Lin
> >> >> >> _______________________________________________
> >> >> >> edk2-devel mailing list
> >> >> >> edk2-devel@xxxxxxxxxxxx
> >> >> >> https://lists.01.org/mailman/listinfo/edk2-devel
> >> >> >>
> >> >> _______________________________________________
> >> >> edk2-devel mailing list
> >> >> edk2-devel@xxxxxxxxxxxx
> >> >> https://lists.01.org/mailman/listinfo/edk2-devel
> >> >>
> >> _______________________________________________
> >> edk2-devel mailing list
> >> edk2-devel@xxxxxxxxxxxx
> >> https://lists.01.org/mailman/listinfo/edk2-devel
> >>

Attachment: ovmf-hack-2.patch
Description: Text Data

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.