Re: [Xen-devel] help

[Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>]

On Thu, Mar 10, 2016 at 09:04:22PM +0100, Safa Hamza wrote:
> hello
> i'm trying to run xen on omap5 following
> this
> http://wiki.xenproject.org/wiki/Xen_ARM_with_Virtualization_Extensions/OMAP5432_uEVM
> 
> the execution stops at this point
> 
> **********************************************************************************************
> U-Boot SPL 2013.10-rc2 (Mar 08 2016 - 14:23:51)
> OMAP5432 ES2.0
> SPL: Please implement spl_start_uboot() for your board
> SPL: Direct Linux boot not active!
> reading u-boot.img
> reading u-boot.img
> 
> 
> U-Boot 2013.10-rc2 (Mar 08 2016 - 14:23:51)
> 
> CPU  : OMAP5432 ES2.0
> Board: OMAP5432 uEVM
> I2C:   ready
> DRAM:  2 GiB
> MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
> Using default environment
> 
> Net:   No ethernet found.
> Hit any key to stop autoboot:  0
> mmc0 is current device
> reading boot.scr
> ** Unable to read file boot.scr **
> reading uEnv.txt
> ** Unable to read file uEnv.txt **
> ** File not found /boot/zImage **
> U-Boot# setenv dtb_addr_r 0x825f0000
> U-Boot# setenv xen_addr_r 0x90000000
> U-Boot# setenv kernel_addr_r 0xa0000000
> U-Boot# setenv xen_bootargs 'sync_console console=dtuart dtuart=serial2'
> U-Boot# setenv dom0_bootargs 'console=hvc0,115200n8 earlyprintk=xen debug

That does not look right.

console=hvc0 earlyprintk=xen debug 

is more right.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel