|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v3 11/16] hvmloader: Load OVMF from modules
On Thu, Mar 03, 2016 at 05:39:50PM +0000, Anthony PERARD wrote:
> On Tue, Mar 01, 2016 at 09:03:42AM -0700, Jan Beulich wrote:
> > >>> On 25.02.16 at 15:56, <anthony.perard@xxxxxxxxxx> wrote:
> > > --- a/tools/firmware/hvmloader/ovmf.c
> > > +++ b/tools/firmware/hvmloader/ovmf.c
> > > @@ -34,17 +34,10 @@
> > > #include <xen/hvm/ioreq.h>
> > > #include <xen/memory.h>
> > >
> > > -#define ROM_INCLUDE_OVMF
> > > -#include "roms.inc"
> > > -
> > > -#define OVMF_SIZE (sizeof(ovmf))
> > > #define OVMF_MAXOFFSET 0x000FFFFFULL
> > > -#define OVMF_BEGIN (0x100000000ULL - ((OVMF_SIZE +
> > > OVMF_MAXOFFSET) & ~OVMF_MAXOFFSET))
> > > -#define OVMF_END (OVMF_BEGIN + OVMF_SIZE)
> > > #define LOWCHUNK_BEGIN 0x000F0000
> > > #define LOWCHUNK_SIZE 0x00010000
> > > #define LOWCHUNK_MAXOFFSET 0x0000FFFF
> > > -#define LOWCHUNK_END (OVMF_BEGIN + OVMF_SIZE)
> > > #define OVMF_INFO_PHYSICAL_ADDRESS 0x00001000
> > >
> > > extern unsigned char dsdt_anycpu_qemu_xen[];
> > > @@ -97,16 +90,20 @@ static void ovmf_load(const struct bios_config
> > > *config,
> > > void *bios_addr, uint32_t bios_length)
> > > {
> > > xen_pfn_t mfn;
> > > - uint64_t addr = OVMF_BEGIN;
> > > + uint64_t addr = 0x100000000ULL
> > > + - ((bios_length + OVMF_MAXOFFSET) & ~OVMF_MAXOFFSET);
> > > + uint64_t ovmf_end = addr + bios_length;
> > > +
> > > + ovmf_config.bios_address = addr;
> > > + ovmf_config.image_size = bios_length;
> > >
> > > /* Copy low-reset vector portion. */
> > > - memcpy((void *) LOWCHUNK_BEGIN, (uint8_t *) config->image
> > > - + OVMF_SIZE
> > > - - LOWCHUNK_SIZE,
> > > + memcpy((void *) LOWCHUNK_BEGIN,
> > > + (uint8_t *) bios_addr + bios_length - LOWCHUNK_SIZE,
> > > LOWCHUNK_SIZE);
> > >
> > > /* Ensure we have backing page prior to moving FD. */
> > > - while ( (addr >> PAGE_SHIFT) != (OVMF_END >> PAGE_SHIFT) )
> > > + while ( (addr >> PAGE_SHIFT) != (ovmf_end >> PAGE_SHIFT) )
> > > {
> > > mfn = (uint32_t) (addr >> PAGE_SHIFT);
> > > addr += PAGE_SIZE;
> > > @@ -114,7 +111,7 @@ static void ovmf_load(const struct bios_config
> > > *config,
> > > }
> > >
> > > /* Copy FD. */
> > > - memcpy((void *) OVMF_BEGIN, config->image, OVMF_SIZE);
> > > + memcpy((void *) ovmf_config.bios_address, bios_addr, bios_length);
> > > }
> >
> > Is this safe, considering that source and destination may now
> > overlap? Thinking about it, the same consideration applies to
> > BIOS placement below 1Mb too.
>
> It's probably not safe, it just happen to work right now. I guest I can add
> some checking, or leave it up to libxc to manage the memory and write this
> blob just after hvmloader, like it's done right now.
>
> I think I'll add some bug_on to catch unexpected changes.
>
If the only concern is overlapping region (not overwriting something
that needs to be used later), using memmove should be good enough?
Wei.
> --
> Anthony PERARD
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |