[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v4 RESEND] public/io/netif.h: make control ring hash protocol more general



David, Wei,

  Ping?

  Paul

> -----Original Message-----
> From: Xen-devel [mailto:xen-devel-bounces@xxxxxxxxxxxxx] On Behalf Of
> Paul Durrant
> Sent: 26 February 2016 17:03
> To: xen-devel@xxxxxxxxxxxxxxxxxxxx
> Cc: Ian Jackson; Wei Liu; David Vrabel; Jan Beulich
> Subject: Re: [Xen-devel] [PATCH v4 RESEND] public/io/netif.h: make control
> ring hash protocol more general
> 
> > -----Original Message-----
> > From: Paul Durrant [mailto:paul.durrant@xxxxxxxxxx]
> > Sent: 26 February 2016 16:52
> > To: xen-devel@xxxxxxxxxxxxxxxxxxxx
> > Cc: Paul Durrant; Ian Jackson; Jan Beulich; Wei Liu; David Vrabel
> > Subject: [PATCH v4 RESEND] public/io/netif.h: make control ring hash
> > protocol more general
> >
> > This patch modified the control ring protocol (of which there is
> > not yet an implementation) to make it more general. Most of the
> > concepts are not limited to toeplitz hashing so it's best not to
> > make them unnecessarily specific.
> >
> > Apart from changing the names of various definitions and modifying
> > comments, this patch:
> >
> > - Adds a new control message type to select a hash algorithm.
> > - Adds a reference implementation of the toeplitz hash.
> > - Changes the 'toeplitz' extra info fragment into a 'hash' extra
> >   info fragment and replaces the octet of padding with the index of
> >   the algorithm that was used to create the hash value.
> > - Relaxes the restriction that the mapping table has to be
> >   power-of-2 sized.
> >
> > The patch also fixes a few spelling typos noticed along the way.
> >
> > Signed-off-by: Paul Durrant <paul.durrant@xxxxxxxxxx>
> > Cc: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
> > Cc: Jan Beulich <jbeulich@xxxxxxxx>
> > Cc: Wei Liu <wei.liuw2@xxxxxxxxxx>
> 
> Apologies to Wei. I mis-typed his email address. Should be:
> 
> Cc: Wei Liu <wei.liu2@xxxxxxxxxx>
> 
> > Cc: David Vrabel <david.vrabel@xxxxxxxxxx>
> > ---
> >
> > v2:
> >   - Remove 'inline' from reference hash definition and make the
> >     definition optional
> >
> > v3:
> >   - Use XEN_NETIF_ prefix instead of NETIF_
> >   - Make hash mapping table optional
> >   - Allow a hash mapping table that is not power-of-two sized
> >
> > v4:
> >   - More NETIF -> XEN_NETIF substitution
> >   - Also defined ctrl message structs with xen_ prefix and get rid
> >     of typedefs
> > ---
> >  xen/include/public/io/netif.h | 350 +++++++++++++++++++++++++++----
> ---
> > --------
> >  1 file changed, 226 insertions(+), 124 deletions(-)
> >
> > diff --git a/xen/include/public/io/netif.h b/xen/include/public/io/netif.h
> > index 8d82625..ca00614 100644
> > --- a/xen/include/public/io/netif.h
> > +++ b/xen/include/public/io/netif.h
> > @@ -164,7 +164,7 @@
> >   * Control ring
> >   * ============
> >   *
> > - * Some features, such as toeplitz hashing (detailed below), require a
> > + * Some features, such as hashing (detailed below), require a
> >   * significant amount of out-of-band data to be passed from frontend to
> >   * backend. Use of xenstore is not suitable for large quantities of data
> >   * because of quota limitations and so a dedicated 'control ring' is used.
> > @@ -191,8 +191,8 @@
> >   */
> >
> >  /*
> > - * Toeplitz hash types
> > - * ===================
> > + * Hash types
> > + * ==========
> >   *
> >   * For the purposes of the definitions below, 'Packet[]' is an array of
> >   * octets containing an IP packet without options, 'Array[X..Y]' means a
> > @@ -206,10 +206,11 @@
> >   * Buffer[0..8] = Packet[12..15] (source address) +
> >   *                Packet[16..19] (destination address)
> >   *
> > - * Result = ToeplitzHash(Buffer, 8)
> > + * Result = Hash(Buffer, 8)
> >   */
> > -#define _NETIF_CTRL_TOEPLITZ_HASH_IPV4     0
> > -#define NETIF_CTRL_TOEPLITZ_HASH_IPV4      (1 <<
> > _NETIF_CTRL_TOEPLITZ_HASH_IPV4)
> > +#define _XEN_NETIF_CTRL_HASH_TYPE_IPV4 0
> > +#define XEN_NETIF_CTRL_HASH_TYPE_IPV4 \
> > +    (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV4)
> >
> >  /*
> >   * A hash calculated over an IP version 4 header and TCP header as
> > @@ -220,10 +221,11 @@
> >   *                 Packet[20..21] (source port) +
> >   *                 Packet[22..23] (destination port)
> >   *
> > - * Result = ToeplitzHash(Buffer, 12)
> > + * Result = Hash(Buffer, 12)
> >   */
> > -#define _NETIF_CTRL_TOEPLITZ_HASH_IPV4_TCP 1
> > -#define NETIF_CTRL_TOEPLITZ_HASH_IPV4_TCP  (1 <<
> > _NETIF_CTRL_TOEPLITZ_HASH_IPV4_TCP)
> > +#define _XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP 1
> > +#define XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP \
> > +    (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP)
> >
> >  /*
> >   * A hash calculated over an IP version 6 header as follows:
> > @@ -231,10 +233,11 @@
> >   * Buffer[0..32] = Packet[8..23]  (source address ) +
> >   *                 Packet[24..39] (destination address)
> >   *
> > - * Result = ToeplitzHash(Buffer, 32)
> > + * Result = Hash(Buffer, 32)
> >   */
> > -#define _NETIF_CTRL_TOEPLITZ_HASH_IPV6     2
> > -#define NETIF_CTRL_TOEPLITZ_HASH_IPV6      (1 <<
> > _NETIF_CTRL_TOEPLITZ_HASH_IPV6)
> > +#define _XEN_NETIF_CTRL_HASH_TYPE_IPV6 2
> > +#define XEN_NETIF_CTRL_HASH_TYPE_IPV6 \
> > +    (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV6)
> >
> >  /*
> >   * A hash calculated over an IP version 6 header and TCP header as
> > @@ -245,14 +248,84 @@
> >   *                 Packet[40..41] (source port) +
> >   *                 Packet[42..43] (destination port)
> >   *
> > - * Result = ToeplitzHash(Buffer, 36)
> > + * Result = Hash(Buffer, 36)
> > + */
> > +#define _XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP 3
> > +#define XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP \
> > +    (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP)
> > +
> > +/*
> > + * Hash algorithms
> > + * ===============
> > + */
> > +
> > +#define XEN_NETIF_CTRL_HASH_ALGORITHM_NONE 0
> > +
> > +/*
> > + * Toeplitz hash:
> > + */
> > +
> > +#define XEN_NETIF_CTRL_HASH_ALGORITHM_TOEPLITZ 1
> > +
> > +/*
> > + * This algorithm uses a 'key' as well as the data buffer itself.
> > + * (Buffer[] and Key[] are treated as shift-registers where the MSB of
> > + * Buffer/Key[0] is considered 'left-most' and the LSB of Buffer/Key[N-1]
> > + * is the 'right-most').
> > + *
> > + * Value = 0
> > + * For number of bits in Buffer[]
> > + *    If (left-most bit of Buffer[] is 1)
> > + *        Value ^= left-most 32 bits of Key[]
> > + *    Key[] << 1
> > + *    Buffer[] << 1
> > + *
> > + * The code below is provided for convenience where an operating
> system
> > + * does not already provide an implementation.
> >   */
> > -#define _NETIF_CTRL_TOEPLITZ_HASH_IPV6_TCP 3
> > -#define NETIF_CTRL_TOEPLITZ_HASH_IPV6_TCP  (1 <<
> > _NETIF_CTRL_TOEPLITZ_HASH_IPV6_TCP)
> > +#ifdef XEN_NETIF_DEFINE_TOEPLITZ
> > +static uint32_t xen_netif_toeplitz_hash(const uint8_t *key,
> > +                                        unsigned int keylen,
> > +                                        const uint8_t *buf,
> > +                                        unsigned int buflen)
> > +{
> > +    unsigned int keyi, bufi;
> > +    uint64_t prefix = 0;
> > +    uint64_t hash = 0;
> > +
> > +    /* Pre-load prefix with the first 8 bytes of the key */
> > +    for (keyi = 0; keyi < 8; keyi++) {
> > +        prefix <<= 8;
> > +        prefix |= (keyi < keylen) ? key[keyi] : 0;
> > +    }
> > +
> > +    for (bufi = 0; bufi < buflen; bufi++) {
> > +        uint8_t byte = buf[bufi];
> > +        unsigned int bit;
> > +
> > +        for (bit = 0; bit < 8; bit++) {
> > +            if (byte & 0x80)
> > +                hash ^= prefix;
> > +            prefix <<= 1;
> > +            byte <<=1;
> > +        }
> > +
> > +        /*
> > +         * 'prefix' has now been left-shifted by 8, so
> > +         * OR in the next byte.
> > +         */
> > +        prefix |= (keyi < keylen) ? key[keyi] : 0;
> > +        keyi++;
> > +    }
> > +
> > +    /* The valid part of the hash is in the upper 32 bits. */
> > +    return hash >> 32;
> > +}
> > +#endif /* XEN_NETIF_DEFINE_TOEPLITZ */
> >
> >  /*
> > - * Control requests (netif_ctrl_request_t)
> > - * =======================================
> > + * Control requests (struct xen_netif_ctrl_request)
> > + * ================================================
> >   *
> >   * All requests have the following format:
> >   *
> > @@ -268,25 +341,25 @@
> >   * data[]: any data associated with the request (determined by type)
> >   */
> >
> > -struct netif_ctrl_request {
> > +struct xen_netif_ctrl_request {
> >      uint16_t id;
> >      uint16_t type;
> >
> > -#define NETIF_CTRL_TYPE_INVALID                    0
> > -#define NETIF_CTRL_TYPE_GET_TOEPLITZ_FLAGS         1
> > -#define NETIF_CTRL_TYPE_SET_TOEPLITZ_FLAGS         2
> > -#define NETIF_CTRL_TYPE_SET_TOEPLITZ_KEY           3
> > -#define NETIF_CTRL_TYPE_GET_TOEPLITZ_MAPPING_ORDER 4
> > -#define NETIF_CTRL_TYPE_SET_TOEPLITZ_MAPPING_ORDER 5
> > -#define NETIF_CTRL_TYPE_SET_TOEPLITZ_MAPPING       6
> > +#define XEN_NETIF_CTRL_TYPE_INVALID               0
> > +#define XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS        1
> > +#define XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS        2
> > +#define XEN_NETIF_CTRL_TYPE_SET_HASH_KEY          3
> > +#define XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE 4
> > +#define XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE 5
> > +#define XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING      6
> > +#define XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM    7
> >
> >      uint32_t data[3];
> >  };
> > -typedef struct netif_ctrl_request netif_ctrl_request_t;
> >
> >  /*
> > - * Control responses (netif_ctrl_response_t)
> > - * =========================================
> > + * Control responses (struct xen_netif_ctrl_response)
> > + * ==================================================
> >   *
> >   * All responses have the following format:
> >   *
> > @@ -304,48 +377,74 @@ typedef struct netif_ctrl_request
> > netif_ctrl_request_t;
> >   *       status)
> >   */
> >
> > -struct netif_ctrl_response {
> > +struct xen_netif_ctrl_response {
> >      uint16_t id;
> >      uint16_t type;
> >      uint32_t status;
> >
> > -#define NETIF_CTRL_STATUS_SUCCESS           0
> > -#define NETIF_CTRL_STATUS_NOT_SUPPORTED     1
> > -#define NETIF_CTRL_STATUS_INVALID_PARAMETER 2
> > -#define NETIF_CTRL_STATUS_BUFFER_OVERFLOW   3
> > +#define XEN_NETIF_CTRL_STATUS_SUCCESS           0
> > +#define XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED     1
> > +#define XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER 2
> > +#define XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW   3
> >
> >      uint32_t data;
> >  };
> > -typedef struct netif_ctrl_response netif_ctrl_response_t;
> >
> >  /*
> >   * Control messages
> >   * ================
> >   *
> > - * NETIF_CTRL_TYPE_GET_TOEPLITZ_FLAGS
> > + * XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM
> > + * --------------------------------------
> > + *
> > + * This is sent by the frontend to set the desired hash algorithm.
> > + *
> > + * Request:
> > + *
> > + *  type    = XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM
> > + *  data[0] = a XEN_NETIF_CTRL_HASH_ALGORITHM_* value
> > + *  data[1] = 0
> > + *  data[2] = 0
> > + *
> > + * Response:
> > + *
> > + *  status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED     - Operation
> not
> > + *                                                     supported
> > + *           XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - The algorithm
> is
> > not
> > + *                                                     supported
> > + *           XEN_NETIF_CTRL_STATUS_SUCCESS           - Operation successful
> > + *
> > + * NOTE: Setting data[0] to XEN_NETIF_CTRL_HASH_ALGORITHM_NONE
> > disables
> > + *       hashing and the backend is free to choose how it steers packets
> > + *       to queues (which is the default behaviour).
> > + *
> > + * XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS
> >   * ----------------------------------
> >   *
> > - * This is sent by the frontend to query the types of toeplitz
> > - * hash supported by the backend.
> > + * This is sent by the frontend to query the types of hash supported by
> > + * the backend.
> >   *
> >   * Request:
> >   *
> > - *  type    = NETIF_CTRL_TYPE_GET_TOEPLITZ_FLAGS
> > + *  type    = XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS
> >   *  data[0] = 0
> >   *  data[1] = 0
> >   *  data[2] = 0
> >   *
> >   * Response:
> >   *
> > - *  status = NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
> > supported
> > - *           NETIF_CTRL_STATUS_SUCCESS       - Operation successful
> > + *  status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
> > supported
> > + *           XEN_NETIF_CTRL_STATUS_SUCCESS       - Operation successful
> >   *  data   = supported hash types (if operation was successful)
> >   *
> > - * NETIF_CTRL_TYPE_SET_TOEPLITZ_FLAGS
> > + * NOTE: A valid hash algorithm must be selected before this operation
> can
> > + *       succeed.
> > + *
> > + * XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS
> >   * ----------------------------------
> >   *
> > - * This is sent by the frontend to set the types of toeplitz hash that
> > - * the backend should calculate. (See above for hash type definitions).
> > + * This is sent by the frontend to set the types of hash that the backend
> > + * should calculate. (See above for hash type definitions).
> >   * Note that the 'maximal' type of hash should always be chosen. For
> >   * example, if the frontend sets both IPV4 and IPV4_TCP hash types then
> >   * the latter hash type should be calculated for any TCP packet and the
> > @@ -353,45 +452,35 @@ typedef struct netif_ctrl_response
> > netif_ctrl_response_t;
> >   *
> >   * Request:
> >   *
> > - *  type    = NETIF_CTRL_TYPE_SET_TOEPLITZ_FLAGS
> > - *  data[0] = bitwise OR of NETIF_CTRL_TOEPLITZ_HASH_* values
> > + *  type    = XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS
> > + *  data[0] = bitwise OR of XEN_NETIF_CTRL_HASH_TYPE_* values
> >   *  data[1] = 0
> >   *  data[2] = 0
> >   *
> >   * Response:
> >   *
> > - *  status = NETIF_CTRL_STATUS_NOT_SUPPORTED     - Operation not
> > supported
> > - *           NETIF_CTRL_STATUS_INVALID_PARAMETER - One or more flag
> value
> > - *                                                 is invalid or
> > - *                                                 unsupported
> > - *           NETIF_CTRL_STATUS_SUCCESS           - Operation successful
> > + *  status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED     - Operation
> not
> > + *                                                     supported
> > + *           XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - One or more
> flag
> > + *                                                     value is invalid or
> > + *                                                     unsupported
> > + *           XEN_NETIF_CTRL_STATUS_SUCCESS           - Operation successful
> >   *  data   = 0
> >   *
> > - * NOTE: Setting data[0] to zero disables toeplitz hashing and the backend
> > - *       is free to choose how it steers packets to queues (which is the
> > - *       default behaviour).
> > + * NOTE: A valid hash algorithm must be selected before this operation
> can
> > + *       succeed.
> > + *       Also, setting data[0] to zero disables hashing and the backend
> > + *       is free to choose how it steers packets to queues.
> >   *
> > - * NETIF_CTRL_TYPE_SET_TOEPLITZ_KEY
> > + * XEN_NETIF_CTRL_TYPE_SET_HASH_KEY
> >   * --------------------------------
> >   *
> > - * This is sent by the frontend to set the key of the toeplitz hash that
> > - * the backend should calculate. The toeplitz algorithm is illustrated
> > - * by the following pseudo-code:
> > - *
> > - * (Buffer[] and Key[] are treated as shift-registers where the MSB of
> > - * Buffer/Key[0] is considered 'left-most' and the LSB of Buffer/Key[N-1]
> > - * is the 'right-most').
> > - *
> > - * Value = 0
> > - * For number of bits in Buffer[]
> > - *    If (left-most bit of Buffer[] is 1)
> > - *        Value ^= left-most 32 bits of Key[]
> > - *    Key[] << 1
> > - *    Buffer[] << 1
> > + * This is sent by the frontend to set the key of the hash if the algorithm
> > + * requires it. (See hash algorithms above).
> >   *
> >   * Request:
> >   *
> > - *  type    = NETIF_CTRL_TYPE_SET_TOEPLITZ_KEY
> > + *  type    = XEN_NETIF_CTRL_TYPE_SET_HASH_KEY
> >   *  data[0] = grant reference of page containing the key (assumed to
> >   *            start at beginning of grant)
> >   *  data[1] = size of key in octets
> > @@ -399,11 +488,13 @@ typedef struct netif_ctrl_response
> > netif_ctrl_response_t;
> >   *
> >   * Response:
> >   *
> > - *  status = NETIF_CTRL_STATUS_NOT_SUPPORTED     - Operation not
> > supported
> > - *           NETIF_CTRL_STATUS_INVALID_PARAMETER - Key size is invalid
> > - *           NETIF_CTRL_STATUS_BUFFER_OVERFLOW   - Key size is larger than
> > - *                                                 the backend supports
> > - *           NETIF_CTRL_STATUS_SUCCESS           - Operation successful
> > + *  status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED     - Operation
> not
> > + *                                                     supported
> > + *           XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Key size is
> invalid
> > + *           XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW   - Key size is
> larger
> > + *                                                     than the backend
> > + *                                                     supports
> > + *           XEN_NETIF_CTRL_STATUS_SUCCESS           - Operation successful
> >   *  data   = 0
> >   *
> >   * NOTE: Any key octets not specified are assumed to be zero (the key
> > @@ -411,67 +502,73 @@ typedef struct netif_ctrl_response
> > netif_ctrl_response_t;
> >   *       invalidates any previous key, hence specifying a key size of
> >   *       zero will clear the key (which ensures that the calculated hash
> >   *       will always be zero).
> > - *       The maximum size of key is backend specific, but is also limited
> > - *       by the single grant reference.
> > + *       The maximum size of key is algorithm and backend specific, but
> > + *       is also limited by the single grant reference.
> >   *       The grant reference may be read-only and must remain valid until
> >   *       the response has been processed.
> >   *
> > - * NETIF_CTRL_TYPE_GET_TOEPLITZ_MAPPING_ORDER
> > - * ------------------------------------------
> > + * XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE
> > + * -----------------------------------------
> >   *
> > - * This is sent by the frontend to query the maximum order of mapping
> > - * table supported by the backend. The order is specified in terms of
> > - * table entries i.e. the table may contain up to 2^order entries.
> > + * This is sent by the frontend to query the maximum size of mapping
> > + * table supported by the backend. The size is specified in terms of
> > + * table entries.
> >   *
> >   * Request:
> >   *
> > - *  type    = NETIF_CTRL_TYPE_GET_TOEPLITZ_MAPPING_ORDER
> > + *  type    = XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE
> >   *  data[0] = 0
> >   *  data[1] = 0
> >   *  data[2] = 0
> >   *
> >   * Response:
> >   *
> > - *  status = NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
> > supported
> > - *           NETIF_CTRL_STATUS_SUCCESS       - Operation successful
> > - *  data   = maximum order of mapping table (if operation was successful)
> > + *  status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
> > supported
> > + *           XEN_NETIF_CTRL_STATUS_SUCCESS       - Operation successful
> > + *  data   = maximum number of entries allowed in the mapping table
> > + *           (if operation was successful) or zero if a mapping table is
> > + *           not supported (i.e. hash mapping is done only by modular
> > + *           arithmetic).
> >   *
> > - * NETIF_CTRL_TYPE_SET_TOEPLITZ_MAPPING_ORDER
> > - * ------------------------------------------
> > + * XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE
> > + * -------------------------------------
> >   *
> > - * This is sent by the frontend to set the actual order of the mapping
> > - * table to be used by the backend. The order is specified in terms of
> > - * table entries i.e. the table will contain to 2^order entries.
> > + * This is sent by the frontend to set the actual size of the mapping
> > + * table to be used by the backend. The size is specified in terms of
> > + * table entries.
> >   * Any previous table is invalidated by this message and any new table
> > - * is assumed to be zero filled. The default order is zero and hence the
> > - * default table contains a single entry mapping all hashes to queue-0.
> > + * is assumed to be zero filled.
> >   *
> >   * Request:
> >   *
> > - *  type    = NETIF_CTRL_TYPE_SET_TOEPLITZ_MAPPING_ORDER
> > - *  data[0] = order of mapping table
> > + *  type    = XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE
> > + *  data[0] = number of entries in mapping table
> >   *  data[1] = 0
> >   *  data[2] = 0
> >   *
> >   * Response:
> >   *
> > - *  status = NETIF_CTRL_STATUS_NOT_SUPPORTED     - Operation not
> > supported
> > - *           NETIF_CTRL_STATUS_INVALID_PARAMETER - Table order is invalid
> > - *           NETIF_CTRL_STATUS_SUCCESS           - Operation successful
> > + *  status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED     - Operation
> not
> > + *                                                     supported
> > + *           XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Table size is
> > invalid
> > + *           XEN_NETIF_CTRL_STATUS_SUCCESS           - Operation successful
> >   *  data   = 0
> >   *
> > - * NETIF_CTRL_TYPE_SET_TOEPLITZ_MAPPING
> > + * NOTE: Setting data[0] to 0 means that hash mapping should be done
> > + *       using modular arithmetic.
> > + *
> > + * XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING
> >   * ------------------------------------
> >   *
> >   * This is sent by the frontend to set the content of the table mapping
> > - * toeplitz hash value to queue number. The backend should calculate the
> > - * hash from the packet header, use it as an index into the table (modulo
> > - * the size of the table) and then steer the packet to the queue number
> > - * found at that index.
> > + * hash value to queue number. The backend should calculate the hash
> > from
> > + * the packet header, use it as an index into the table (modulo the size
> > + * of the table) and then steer the packet to the queue number found at
> > + * that index.
> >   *
> >   * Request:
> >   *
> > - *  type    = NETIF_CTRL_TYPE_SET_TOEPLITZ_MAPPING
> > + *  type    = XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING
> >   *  data[0] = grant reference of page containing the mapping (sub-)table
> >   *            (assumed to start at beginning of grant)
> >   *  data[1] = size of (sub-)table in entries
> > @@ -479,12 +576,14 @@ typedef struct netif_ctrl_response
> > netif_ctrl_response_t;
> >   *
> >   * Response:
> >   *
> > - *  status = NETIF_CTRL_STATUS_NOT_SUPPORTED     - Operation not
> > supported
> > - *           NETIF_CTRL_STATUS_INVALID_PARAMETER - Table size or content
> is
> > - *                                                 invalid
> > - *           NETIF_CTRL_STATUS_BUFFER_OVERFLOW   - Table size is larger
> than
> > - *                                                 the backend supports
> > - *           NETIF_CTRL_STATUS_SUCCESS           - Operation successful
> > + *  status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED     - Operation
> not
> > + *                                                     supported
> > + *           XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Table size or
> > content
> > + *                                                     is invalid
> > + *           XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW   - Table size is
> > larger
> > + *                                                     than the backend
> > + *                                                     supports
> > + *           XEN_NETIF_CTRL_STATUS_SUCCESS           - Operation successful
> >   *  data   = 0
> >   *
> >   * NOTE: The overall table has the following format:
> > @@ -500,9 +599,8 @@ typedef struct netif_ctrl_response
> > netif_ctrl_response_t;
> >   *       |      mapping[N-2]     |      mapping[N-1]     |
> >   *       +-----+-----+-----+-----+-----+-----+-----+-----+
> >   *
> > - *       where N == 2^order as specified by a
> > - *       NETIF_CTRL_TYPE_SET_TOEPLITZ_MAPPING_ORDER message and
> > each
> > - *       mapping must specifies a queue between 0 and
> > + *       where N is specified by a
> > XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE
> > + *       message and each  mapping must specifies a queue between 0 and
> >   *       "multi-queue-num-queues" (see above).
> >   *       The backend may support a mapping table larger than can be
> >   *       mapped by a single grant reference. Thus sub-tables within a
> > @@ -513,7 +611,9 @@ typedef struct netif_ctrl_response
> > netif_ctrl_response_t;
> >   *       the response has been processed.
> >   */
> >
> > -DEFINE_RING_TYPES(netif_ctrl, struct netif_ctrl_request, struct
> > netif_ctrl_response);
> > +DEFINE_RING_TYPES(xen_netif_ctrl,
> > +                  struct xen_netif_ctrl_request,
> > +                  struct xen_netif_ctrl_response);
> >
> >  /*
> >   * Guest transmit
> > @@ -531,7 +631,7 @@ DEFINE_RING_TYPES(netif_ctrl, struct
> > netif_ctrl_request, struct netif_ctrl_respo
> >   *  ...
> >   *  Fragment N: netif_tx_request_t  - (only if fragment N-1 flags include
> >   *                                     NETTXF_more_data - flags on 
> > preceding
> > - *                                     extras are not relevent here)
> > + *                                     extras are not relevant here)
> >   *                                    flags = 0
> >   *                                    size = fragment size
> >   *
> > @@ -589,7 +689,7 @@ DEFINE_RING_TYPES(netif_ctrl, struct
> > netif_ctrl_request, struct netif_ctrl_respo
> >   *  ...
> >   *  Fragment N: netif_rx_request_t  - (only if fragment N-1 flags include
> >   *                                     NETRXF_more_data - flags on 
> > preceding
> > - *                                     extras are not relevent here)
> > + *                                     extras are not relevant here)
> >   *                                    flags = 0
> >   *                                    size = fragment size
> >   *
> > @@ -631,7 +731,7 @@ DEFINE_RING_TYPES(netif_ctrl, struct
> > netif_ctrl_request, struct netif_ctrl_respo
> >   *       described below, extra info structures overlay the id field).
> >   *       Instead it assumes that responses always appear in the same ring
> >   *       slot as their corresponding request. Thus, to maintain
> > - *       compatibilty, backends must make sure this is the case.
> > + *       compatibility, backends must make sure this is the case.
> >   *
> >   * Extra Info
> >   * ==========
> > @@ -696,21 +796,23 @@ DEFINE_RING_TYPES(netif_ctrl, struct
> > netif_ctrl_request, struct netif_ctrl_respo
> >   * flags: XEN_NETIF_EXTRA_FLAG_*
> >   * addr: address to add/remove
> >   *
> > - * XEN_NETIF_EXTRA_TYPE_TOEPLITZ:
> > + * XEN_NETIF_EXTRA_TYPE_HASH:
> >   *
> >   * A backend that supports teoplitz hashing is assumed to accept
> >   * this type of extra info in transmit packets.
> > - * A frontend that enables toeplitz hashing is assumed to accept
> > + * A frontend that enables hashing is assumed to accept
> >   * this type of extra info in receive packets.
> >   *
> >   *    0     1     2     3     4     5     6     7  octet
> >   * +-----+-----+-----+-----+-----+-----+-----+-----+
> > - * |type |flags|htype| pad |LSB ---- value ---- MSB|
> > + * |type |flags|htype| alg |LSB ---- value ---- MSB|
> >   * +-----+-----+-----+-----+-----+-----+-----+-----+
> >   *
> > - * type: Must be XEN_NETIF_EXTRA_TYPE_TOEPLITZ
> > + * type: Must be XEN_NETIF_EXTRA_TYPE_HASH
> >   * flags: XEN_NETIF_EXTRA_FLAG_*
> > - * htype: Hash type (one of _NETIF_CTRL_TOEPLITZ_HASH_* - see above)
> > + * htype: Hash type (one of _XEN_NETIF_CTRL_HASH_TYPE_* - see
> above)
> > + * alg: The algorithm used to calculate the hash (one of
> > + *      XEN_NETIF_CTRL_HASH_TYPE_ALGORITHM_* - see above)
> >   * value: Hash value
> >   */
> >
> > @@ -745,7 +847,7 @@ typedef struct netif_tx_request
> netif_tx_request_t;
> >  #define XEN_NETIF_EXTRA_TYPE_GSO       (1)  /* u.gso */
> >  #define XEN_NETIF_EXTRA_TYPE_MCAST_ADD (2)  /* u.mcast */
> >  #define XEN_NETIF_EXTRA_TYPE_MCAST_DEL (3)  /* u.mcast */
> > -#define XEN_NETIF_EXTRA_TYPE_TOEPLITZ  (4)  /* u.toeplitz */
> > +#define XEN_NETIF_EXTRA_TYPE_HASH      (4)  /* u.hash */
> >  #define XEN_NETIF_EXTRA_TYPE_MAX       (5)
> >
> >  /* netif_extra_info_t flags. */
> > @@ -776,9 +878,9 @@ struct netif_extra_info {
> >          } mcast;
> >          struct {
> >              uint8_t type;
> > -            uint8_t pad;
> > +            uint8_t algorithm;
> >              uint8_t value[4];
> > -        } toeplitz;
> > +        } hash;
> >          uint16_t pad[3];
> >      } u;
> >  };
> > --
> > 2.1.4
> 
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxx
> http://lists.xen.org/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.