[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v4 13/21] arm/gic-v2: Add ACPI boot support for GICv2



On Thu, 25 Feb 2016, Shannon Zhao wrote:
> On 2016/2/25 18:42, Stefano Stabellini wrote:
> > On Thu, 25 Feb 2016, Shannon Zhao wrote:
> >> On 2016/1/28 20:56, Stefano Stabellini wrote:
> >>> On Sat, 23 Jan 2016, Shannon Zhao wrote:
> >>>> From: Parth Dixit <parth.dixit@xxxxxxxxxx>
> >>>>
> >>>> ACPI on Xen hypervisor uses MADT table for proper GIC initialization.
> >>>> First get the GIC version from GIC Distributor. Then parse GIC related
> >>>> subtables, collect CPU interface and distributor addresses and call
> >>>> driver initialization function (which is hardware abstraction agnostic).
> >>>> In a similar way, FDT initialize GICv2.
> >>>>
> >>>> Signed-off-by: Parth Dixit <parth.dixit@xxxxxxxxxx>
> >>>> Signed-off-by: Shannon Zhao <shannon.zhao@xxxxxxxxxx>
> >>>>
> >>>> V4: use container_of and fix coding style
> >>>> ---
> >>>>  xen/arch/arm/gic-v2.c | 120 
> >>>> +++++++++++++++++++++++++++++++++++++++++++++++++-
> >>>>  1 file changed, 119 insertions(+), 1 deletion(-)
> >>>>
> >>>> diff --git a/xen/arch/arm/gic-v2.c b/xen/arch/arm/gic-v2.c
> >>>> index 668b863..7e46ee9 100644
> >>>> --- a/xen/arch/arm/gic-v2.c
> >>>> +++ b/xen/arch/arm/gic-v2.c
> >>>> @@ -29,6 +29,8 @@
> >>>>  #include <xen/device_tree.h>
> >>>>  #include <xen/libfdt/libfdt.h>
> >>>>  #include <xen/sizes.h>
> >>>> +#include <xen/acpi.h>
> >>>> +#include <acpi/actables.h>
> >>>>  #include <asm/p2m.h>
> >>>>  #include <asm/domain.h>
> >>>>  #include <asm/platform.h>
> >>>> @@ -36,6 +38,7 @@
> >>>>  
> >>>>  #include <asm/io.h>
> >>>>  #include <asm/gic.h>
> >>>> +#include <asm/acpi.h>
> >>>>  
> >>>>  /*
> >>>>   * LR register definitions are GIC v2 specific.
> >>>> @@ -681,11 +684,111 @@ static void __init gicv2_dt_init(void)
> >>>>                 csize, vsize);
> >>>>  }
> >>>>  
> >>>> +#ifdef CONFIG_ACPI
> >>>> +static int __init
> >>>> +gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
> >>>> +                        const unsigned long end)
> >>>> +{
> >>>> +    static int cpu_base_assigned = 0;
> >>>> +    struct acpi_madt_generic_interrupt *processor =
> >>>> +               container_of(header, struct acpi_madt_generic_interrupt, 
> >>>> header);
> >>>> +
> >>>> +    if ( BAD_MADT_ENTRY(processor, end) )
> >>>> +        return -EINVAL;
> >>>> +
> >>>> +    /* Read from APIC table and fill up the GIC variables */
> >>>> +    if ( cpu_base_assigned == 0 )
> >>>> +    {
> >>>> +        cbase = processor->base_address;
> >>>> +        csize = SZ_8K;
> >>>> +        hbase = processor->gich_base_address;
> >>>> +        vbase = processor->gicv_base_address;
> >>>> +        gicv2_info.maintenance_irq = processor->vgic_interrupt;
> >>>> +
> >>>> +        if( processor->flags & ACPI_MADT_VGIC_IRQ_MODE )
> >>>
> >>>             ^ if ( 
> >>>
> >>>
> >>>> +            irq_set_type(gicv2_info.maintenance_irq, 
> >>>> IRQ_TYPE_EDGE_BOTH);
> >>>> +        else
> >>>> +            irq_set_type(gicv2_info.maintenance_irq, 
> >>>> IRQ_TYPE_LEVEL_MASK);
> >>>> +
> >>>> +        cpu_base_assigned = 1;
> >>>> +    }
> >>>> +    else
> >>>> +    {
> >>>> +        if ( cbase != processor->base_address
> >>>> +             || hbase != processor->gich_base_address
> >>>> +             || vbase != processor->gicv_base_address
> >>>> +             || gicv2_info.maintenance_irq != processor->vgic_interrupt 
> >>>> )
> >>>> +        {
> >>>> +            printk("GICv2: GICC entries are not same in MADT table\n");
> >>>> +            return -EINVAL;
> >>>> +        }
> >>>> +    }
> >>>> +
> >>>> +    return 0;
> >>>> +}
> >>>> +
> >>>> +static int __init
> >>>> +gic_acpi_parse_madt_distributor(struct acpi_subtable_header *header,
> >>>> +                                const unsigned long end)
> >>>> +{
> >>>> +    struct acpi_madt_generic_distributor *dist =
> >>>> +             container_of(header, struct acpi_madt_generic_distributor, 
> >>>> header);
> >>>> +
> >>>> +    if ( BAD_MADT_ENTRY(dist, end) )
> >>>> +        return -EINVAL;
> >>>> +
> >>>> +    dbase = dist->base_address;
> >>>> +
> >>>> +    return 0;
> >>>> +}
> >>>> +
> >>>> +static void __init gicv2_acpi_init(void)
> >>>> +{
> >>>> +    acpi_status status;
> >>>> +    struct acpi_table_header *table;
> >>>> +    int count;
> >>>> +
> >>>> +    status = acpi_get_table(ACPI_SIG_MADT, 0, &table);
> >>>> +
> >>>> +    if ( ACPI_FAILURE(status) )
> >>>> +    {
> >>>> +        const char *msg = acpi_format_exception(status);
> >>>> +
> >>>> +        panic("GICv2: Failed to get MADT table, %s", msg);
> >>>> +    }
> >>>> +
> >>>> +    /* Collect CPU base addresses */
> >>>> +    count = acpi_parse_entries(ACPI_SIG_MADT, sizeof(struct 
> >>>> acpi_table_madt),
> >>>> +                               gic_acpi_parse_madt_cpu, table,
> >>>> +                               ACPI_MADT_TYPE_GENERIC_INTERRUPT, 0);
> >>>> +    if ( count <= 0 )
> >>>> +        panic("GICv2: No valid GICC entries exists");
> >>>> +
> >>>> +    /*
> >>>> +     * Find distributor base address. We expect one distributor entry 
> >>>> since
> >>>> +     * ACPI 5.0 spec neither support multi-GIC instances nor GIC 
> >>>> cascade.
> >>>> +     */
> >>>> +    count = acpi_parse_entries(ACPI_SIG_MADT, sizeof(struct 
> >>>> acpi_table_madt),
> >>>> +                               gic_acpi_parse_madt_distributor, table,
> >>>> +                               ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, 0);
> >>>> +    if ( count <= 0 )
> >>>> +        panic("GICv2: No valid GICD entries exists");
> >>>> +}
> >>>> +#else
> >>>> +static void __init gicv2_acpi_init(void)
> >>>> +{
> >>>> +/* Should never reach here */
> >>>> +}
> >>>> +#endif
> >>>
> >>> With acpi_disabled becoming an #define constant, this #else should not
> >>> be needed.
> >>>
> >> If I remove #else and define acpi_disabled as a constant as you
> >> suggested, it has below compiling error on arm32.
> >>
> >> diff --git a/xen/arch/arm/gic-v2.c b/xen/arch/arm/gic-v2.c
> >> index 9a9fcd5..28ec064 100644
> >> --- a/xen/arch/arm/gic-v2.c
> >> +++ b/xen/arch/arm/gic-v2.c
> >> @@ -776,11 +776,6 @@ static void __init acpi_gicv2_init(void)
> >>      if ( count <= 0 )
> >>          panic("GICv2: No valid GICD entries exists");
> >>  }
> >> -#else
> >> -static void __init acpi_gicv2_init(void)
> >> -{
> >> -/* Should never reach here */
> >> -}
> >>  #endif
> >>
> >> gic-v2.c: In function 'gicv2_init':
> >> gic-v2.c:793:9: error: implicit declaration of function
> >> 'acpi_gicv2_init' [-Werror=implicit-function-declaration]
> >> gic-v2.c:793:9: error: nested extern declaration of 'acpi_gicv2_init'
> >> [-Werror=nested-externs]
> >> cc1: all warnings being treated as errors
> > 
> > Sorry, I should have been clearer. You still need to have a declaration
> > of the function outside the #ifdef. Something like the following should
> > work:
> > 
> >   static void acpi_gicv2_init(void);
> > 
> >   [...]
> > 
> >   #ifdef CONFIG_ACPI
> >   static void __init acpi_gicv2_init(void)
> >   {
> >       /* do something */
> >   }
> >   #endif
> > 
> >   [...]
> > 
> >   if ( acpi_disabled )
> >       gicv2_dt_init();
> >   else
> >       gicv2_acpi_init();
> > 
> > .
> > 
> I'm afraid it doesn't work. Still has below errors with the declaration:
> 
> gic-v2.c:687:13: error: 'gicv2_acpi_init' used but never defined [-Werror]
> cc1: all warnings being treated as errors
>
> diff --git a/xen/arch/arm/gic-v2.c b/xen/arch/arm/gic-v2.c
> index 4b6c4c0..7b7e094 100644
> --- a/xen/arch/arm/gic-v2.c
> +++ b/xen/arch/arm/gic-v2.c
> @@ -684,6 +684,8 @@ static void __init gicv2_dt_init(void)
>                 csize, vsize);
>  }
> 
> +static void gicv2_acpi_init(void);

It should be

   void gicv2_acpi_init(void);

without "static".



>  #ifdef CONFIG_ACPI
>  static int __init
>  gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
> @@ -774,11 +776,6 @@ static void __init gicv2_acpi_init(void)
>      if ( count <= 0 )
>          panic("GICv2: No valid GICD entries exists");
>  }
> -#else
> -static void __init gicv2_acpi_init(void)
> -{
> -/* Should never reach here */
> -}
>  #endif
> 
>  static int __init gicv2_init(void)
> 
> -- 
> Shannon
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.