|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v3 05/23] xsplice: Add helper elf routines (v4)
On 12/02/16 18:05, Konrad Rzeszutek Wilk wrote:
> From: Ross Lagerwall <ross.lagerwall@xxxxxxxxxx>
>
> Add Elf routines and data structures in preparation for loading an
> xSplice payload.
>
> We also add an macro that will print where we failed during
> the ELF parsing - which is only available during debug builds.
> In production (debug=n) we only return the error value.
>
> Signed-off-by: Ross Lagerwall <ross.lagerwall@xxxxxxxxxx>
> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
> ---
> v2: - With the #define ELFSIZE in the ARM file we can use the common
> #defines instead of using #ifdef CONFIG_ARM_32. Moved to another
> patch.
> - Add checks for ELF file.
> - Add name to be printed.
> - Add len for easier ELF checks.
> - Expand on the checks. Add macro.
> v3: Remove the return_ macro
> v4: Add return_ macro back but make it depend on debug=y
> ---
> xen/common/Makefile | 1 +
> xen/common/xsplice_elf.c | 205
> ++++++++++++++++++++++++++++++++++++++++++
> xen/include/xen/xsplice_elf.h | 37 ++++++++
> 3 files changed, 243 insertions(+)
> create mode 100644 xen/common/xsplice_elf.c
> create mode 100644 xen/include/xen/xsplice_elf.h
>
> diff --git a/xen/common/Makefile b/xen/common/Makefile
> index 43b3911..a8ceaff 100644
> --- a/xen/common/Makefile
> +++ b/xen/common/Makefile
> @@ -74,3 +74,4 @@ subdir-y += libelf
> subdir-$(CONFIG_HAS_DEVICE_TREE) += libfdt
>
> obj-$(CONFIG_XSPLICE) += xsplice.o
> +obj-$(CONFIG_XSPLICE) += xsplice_elf.o
Again, location in the makefile.
> diff --git a/xen/common/xsplice_elf.c b/xen/common/xsplice_elf.c
> new file mode 100644
> index 0000000..d9f9002
> --- /dev/null
> +++ b/xen/common/xsplice_elf.c
> @@ -0,0 +1,205 @@
> +#include <xen/errno.h>
> +#include <xen/lib.h>
> +#include <xen/xsplice_elf.h>
> +#include <xen/xsplice.h>
> +
> +#ifdef NDEBUG
> +#define return_(x) return x
> +#else
> +#define return_(x) { printk(XENLOG_DEBUG "%s:%d rc: %d\n", \
> + __func__,__LINE__, x); return x; }
:( This is a horrible antipattern. Just use dprintk() which gets you
this information anyway, and allows for more textural information.
> +#endif
> +
> +struct xsplice_elf_sec *xsplice_elf_sec_by_name(const struct xsplice_elf
> *elf,
> + const char *name)
> +{
> + unsigned int i;
> +
> + for ( i = 0; i < elf->hdr->e_shnum; i++ )
> + {
> + if ( !strcmp(name, elf->sec[i].name) )
> + return &elf->sec[i];
> + }
> +
> + return NULL;
> +}
> +
> +static int elf_resolve_sections(struct xsplice_elf *elf, uint8_t *data)
> +{
> + struct xsplice_elf_sec *sec;
> + unsigned int i;
> +
> + sec = xmalloc_array(struct xsplice_elf_sec, elf->hdr->e_shnum);
Presumably there will be some sanity checks done somewhere between the
hypercall and here?
> + if ( !sec )
> + {
> + printk(XENLOG_ERR "Could not allocate memory for section table!\n");
> + return_(-ENOMEM);
> + }
> +
> + /* N.B. We also will ingest SHN_UNDEF sections. */
> + for ( i = 0; i < elf->hdr->e_shnum; i++ )
> + {
> + ssize_t delta = elf->hdr->e_shoff + i * elf->hdr->e_shentsize;
> +
> + if ( delta + sizeof(Elf_Shdr) > elf->len )
> + return_(-EINVAL);
> +
> + sec[i].sec = (Elf_Shdr *)(data + delta);
> + delta = sec[i].sec->sh_offset;
> +
> + if ( delta > elf->len )
> + return_(-EINVAL);
> +
> + sec[i].data = data + delta;
> + /* Name is populated in xsplice_elf_sections_name. */
> + sec[i].name = NULL;
> +
> + if ( sec[i].sec->sh_type == SHT_SYMTAB )
> + {
(mis) alignment.
> + if ( elf->symtab )
> + return_(-EINVAL);
> + elf->symtab = &sec[i];
> + /* elf->symtab->sec->sh_link would point to the right section
> + * but we hadn't finished parsing all the sections. */
> + if ( elf->symtab->sec->sh_link > elf->hdr->e_shnum )
> + return_(-EINVAL);
> + }
> + }
Newline please.
> <snip>
> +
> +int xsplice_elf_load(struct xsplice_elf *elf, uint8_t *data)
> +{
> + int rc;
> +
> + elf->hdr = (Elf_Ehdr *)data;
A lot of this code would be neater (i.e. without explicit typecasts) if
data was void * rather than uint8_t. GCC pointer arithmetic on void *
works in a sane way.
> +
> + if ( sizeof(*elf->hdr) >= elf->len )
> + return_(-EINVAL);
> +
> + if ( elf->hdr->e_shstrndx == SHN_UNDEF )
> + return_(-EINVAL);
> +
> + /* Check that section name index is within the sections. */
> + if ( elf->hdr->e_shstrndx > elf->hdr->e_shnum )
> + return_(-EINVAL);
> +
> + rc = elf_resolve_sections(elf, data);
> + if ( rc )
> + return rc;
> +
> + rc = elf_resolve_section_names(elf, data);
> + if ( rc )
> + return rc;
> +
> + rc = elf_get_sym(elf, data);
> + if ( rc )
> + return rc;
> +
> + return 0;
> +}
> +
> +void xsplice_elf_free(struct xsplice_elf *elf)
> +{
> + xfree(elf->sec);
> + elf->sec = NULL;
> + xfree(elf->sym);
> + elf->sym = NULL;
> + elf->nsym = 0;
> + elf->name = NULL;
> + elf->len = 0;
> +}
Variable block please.
> diff --git a/xen/include/xen/xsplice_elf.h b/xen/include/xen/xsplice_elf.h
> new file mode 100644
> index 0000000..42dbc6f
> --- /dev/null
> +++ b/xen/include/xen/xsplice_elf.h
> @@ -0,0 +1,37 @@
> +#ifndef __XEN_XSPLICE_ELF_H__
> +#define __XEN_XSPLICE_ELF_H__
> +
> +#include <xen/types.h>
> +#include <xen/elfstructs.h>
> +
> +/* The following describes an Elf file as consumed by xSplice. */
> +struct xsplice_elf_sec {
> + Elf_Shdr *sec; /* Hooked up in elf_resolve_sections. */
> + const char *name; /* Human readable name hooked in
> + elf_resolve_section_names. */
> + const uint8_t *data; /* Pointer to the section (done by
> + elf_resolve_sections). */
> +};
> +
> +struct xsplice_elf_sym {
> + Elf_Sym *sym;
> + const char *name;
> +};
> +
> +struct xsplice_elf {
> + const char *name; /* Pointer to payload->name. */
> + ssize_t len; /* Length of the ELF file. */
> + Elf_Ehdr *hdr; /* ELF file. */
> + struct xsplice_elf_sec *sec; /* Array of sections, allocated by us. */
> + struct xsplice_elf_sym *sym; /* Array of symbols , allocated by us. */
> + unsigned int nsym;
> + struct xsplice_elf_sec *symtab;/* Pointer to .symtab section - aka to
> sec[x]. */
> + struct xsplice_elf_sec *strtab;/* Pointer to .strtab section - aka to
> sec[y]. */
> +};
> +
> +struct xsplice_elf_sec *xsplice_elf_sec_by_name(const struct xsplice_elf
> *elf,
> + const char *name);
> +int xsplice_elf_load(struct xsplice_elf *elf, uint8_t *data);
> +void xsplice_elf_free(struct xsplice_elf *elf);
> +
> +#endif /* __XEN_XSPLICE_ELF_H__ */
Variable block please.
~Andrew
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |