[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [qemu-upstream-4.4-testing test] 80734: regressions - FAIL



flight 80734 qemu-upstream-4.4-testing real [real]
http://logs.test-lab.xenproject.org/osstest/logs/80734/

Regressions :-(

Tests which did not succeed and are blocking,
including tests which could not be run:
 test-amd64-i386-xl-qemuu-debianhvm-amd64 9 debian-hvm-install fail REGR. vs. 
77834
 test-amd64-amd64-xl-qemuu-debianhvm-amd64 9 debian-hvm-install fail REGR. vs. 
77834
 test-amd64-amd64-qemuu-nested-intel  9 debian-hvm-install fail REGR. vs. 77834
 test-amd64-amd64-qemuu-nested-amd  9 debian-hvm-install   fail REGR. vs. 77834
 test-amd64-i386-qemuu-rhel6hvm-intel  9 redhat-install    fail REGR. vs. 77834
 test-amd64-i386-freebsd10-i386 10 guest-start             fail REGR. vs. 77834
 test-amd64-i386-freebsd10-amd64 10 guest-start            fail REGR. vs. 77834
 test-amd64-i386-qemuu-rhel6hvm-amd  9 redhat-install      fail REGR. vs. 77834
 test-amd64-amd64-xl-qemuu-winxpsp3  9 windows-install     fail REGR. vs. 77834
 test-amd64-i386-xl-qemuu-winxpsp3-vcpus1 9 windows-install fail REGR. vs. 77834
 test-amd64-amd64-xl-qemuu-win7-amd64  9 windows-install   fail REGR. vs. 77834
 test-amd64-i386-xl-qemuu-win7-amd64  9 windows-install    fail REGR. vs. 77834

Regressions which are regarded as allowable (not blocking):
 test-amd64-i386-xl-qemuu-ovmf-amd64  9 debian-hvm-install      fail like 77618
 test-amd64-amd64-xl-qemuu-ovmf-amd64  9 debian-hvm-install     fail like 77618

Tests which did not succeed, but are not blocking:
 test-amd64-amd64-libvirt     12 migrate-support-check        fail   never pass
 test-amd64-i386-libvirt      12 migrate-support-check        fail   never pass
 test-amd64-amd64-libvirt-vhd 11 migrate-support-check        fail   never pass

version targeted for testing:
 qemuu                11ac1da95c4e8b2c9c627e0cbcaa50c90c298a1b
baseline version:
 qemuu                2264b0c66075cc34c252a1386f019f8be6240890

Last test of basis    77834  2016-01-11 13:28:00 Z   26 days
Testing same since    80734  2016-02-05 15:19:13 Z    1 days    1 attempts

------------------------------------------------------------
People who touched revisions under test:
  Gerd Hoffmann <kraxel@xxxxxxxxxx>
  Jason Wang <jasowang@xxxxxxxxxx>
  John Snow <jsnow@xxxxxxxxxx>
  Laszlo Ersek <lersek@xxxxxxxxxx>
  P J P <ppandit@xxxxxxxxxx>
  Paolo Bonzini <pbonzini@xxxxxxxxxx>
  Peter Maydell <peter.maydell@xxxxxxxxxx>
  Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
  Roger Pau Monne <roger.pau@xxxxxxxxxx>
  Roger Pau Monné <roger.pau@xxxxxxxxxx>
  Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>

jobs:
 build-amd64-xend                                             pass
 build-i386-xend                                              pass
 build-amd64                                                  pass
 build-i386                                                   pass
 build-amd64-libvirt                                          pass
 build-i386-libvirt                                           pass
 build-amd64-pvops                                            pass
 build-i386-pvops                                             pass
 test-amd64-amd64-xl                                          pass
 test-amd64-i386-xl                                           pass
 test-amd64-amd64-qemuu-nested-amd                            fail
 test-amd64-i386-qemuu-rhel6hvm-amd                           fail
 test-amd64-amd64-xl-qemuu-debianhvm-amd64                    fail
 test-amd64-i386-xl-qemuu-debianhvm-amd64                     fail
 test-amd64-i386-freebsd10-amd64                              fail
 test-amd64-amd64-xl-qemuu-ovmf-amd64                         fail
 test-amd64-i386-xl-qemuu-ovmf-amd64                          fail
 test-amd64-amd64-xl-qemuu-win7-amd64                         fail
 test-amd64-i386-xl-qemuu-win7-amd64                          fail
 test-amd64-amd64-xl-credit2                                  pass
 test-amd64-i386-freebsd10-i386                               fail
 test-amd64-amd64-qemuu-nested-intel                          fail
 test-amd64-i386-qemuu-rhel6hvm-intel                         fail
 test-amd64-amd64-libvirt                                     pass
 test-amd64-i386-libvirt                                      pass
 test-amd64-amd64-xl-multivcpu                                pass
 test-amd64-amd64-pair                                        pass
 test-amd64-i386-pair                                         pass
 test-amd64-amd64-libvirt-pair                                pass
 test-amd64-i386-libvirt-pair                                 pass
 test-amd64-amd64-pv                                          pass
 test-amd64-i386-pv                                           pass
 test-amd64-amd64-amd64-pvgrub                                pass
 test-amd64-amd64-i386-pvgrub                                 pass
 test-amd64-amd64-pygrub                                      pass
 test-amd64-amd64-xl-qcow2                                    pass
 test-amd64-i386-xl-raw                                       pass
 test-amd64-i386-xl-qemuu-winxpsp3-vcpus1                     fail
 test-amd64-amd64-libvirt-vhd                                 pass
 test-amd64-amd64-xl-qemuu-winxpsp3                           fail


------------------------------------------------------------
sg-report-flight on osstest.test-lab.xenproject.org
logs: /home/logs/logs
images: /home/logs/images

Logs, config files, etc. are available at
    http://logs.test-lab.xenproject.org/osstest/logs

Explanation of these reports, and of osstest in general, is at
    http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master
    http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master

Test harness code can be found at
    http://xenbits.xen.org/gitweb?p=osstest.git;a=summary


Not pushing.

------------------------------------------------------------
commit 11ac1da95c4e8b2c9c627e0cbcaa50c90c298a1b
Author: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
Date:   Fri Nov 20 11:50:31 2015 +0530

    net: pcnet: add check to validate receive data size(CVE-2015-7504)

    In loopback mode, pcnet_receive routine appends CRC code to the
    receive buffer. If the data size given is same as the buffer size,
    the appended CRC code overwrites 4 bytes after s->buffer. Added a
    check to avoid that.

    Reported by: Qinghao Tang <luodalongde@xxxxxxxxx>
    Cc: qemu-stable@xxxxxxxxxx
    Reviewed-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
    Signed-off-by: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
    Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>

commit 5e4b77ec2c43b3230c717e4470a7c89465fc87c5
Author: Jason Wang <jasowang@xxxxxxxxxx>
Date:   Mon Nov 30 15:00:06 2015 +0800

    pcnet: fix rx buffer overflow(CVE-2015-7512)

    Backends could provide a packet whose length is greater than buffer
    size. Check for this and truncate the packet to avoid rx buffer
    overflow in this case.

    Cc: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
    Cc: qemu-stable@xxxxxxxxxx
    Reviewed-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
    Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>

commit 6178660b8f4891bdf4810be5b9f9e9aabebda1ed
Author: Gerd Hoffmann <kraxel@xxxxxxxxxx>
Date:   Mon Dec 14 09:21:23 2015 +0100

    ehci: make idt processing more robust

    Make ehci_process_itd return an error in case we didn't do any actual
    iso transfer because we've found no active transaction.  That'll avoid
    ehci happily run in circles forever if the guest builds a loop out of
    idts.

    This is CVE-2015-8558.

    Cc: qemu-stable@xxxxxxxxxx
    Reported-by: Qinghao Tang <luodalongde@xxxxxxxxx>
    Tested-by: P J P <ppandit@xxxxxxxxxx>
    Signed-off-by: Gerd Hoffmann <kraxel@xxxxxxxxxx>

commit 2600664a4e8d333290f01f0a957ea996e300bc6f
Author: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
Date:   Mon Jan 25 19:59:50 2016 +0530

    exec: fix a glitch in checking dma r/w access

    While checking r/w access in 'memory_access_is_direct' routine
    a glitch in the expression leads to segmentation fault while
    performing dma read operation.

    Reported-by: Donghai Zdh <donghai.zdh@xxxxxxxxxxxxxxx>
    Signed-off-by: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>

commit d08f9e6bfc8d15d1ac6377e4cfe48e1f4ef4d932
Author: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
Date:   Wed Jan 20 01:26:46 2016 +0530

    usb: check page select value while processing iTD

    While processing isochronous transfer descriptors(iTD), the page
    select(PG) field value could lead to an OOB read access. Add
    check to avoid it.

    Reported-by: Qinghao Tang <luodalongde@xxxxxxxxx>
    Signed-off-by: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
    Message-id: 1453233406-12165-1-git-send-email-ppandit@xxxxxxxxxx
    Signed-off-by: Gerd Hoffmann <kraxel@xxxxxxxxxx>

commit a37e0e9de748f58b793a83e5d680f474c640f87e
Author: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
Date:   Fri Jan 15 12:30:40 2016 +0530

    net: cadence_gem: check packet size in gem_recieve

    While receiving packets in 'gem_receive' routine, if Frame Check
    Sequence(FCS) is enabled, it copies the packet into a local
    buffer without checking its size. Add check to validate packet
    length against the buffer size to avoid buffer overflow.

    Reported-by: Ling Liu <liuling-it@xxxxxx>
    Signed-off-by: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
    Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>

commit cf39008ae613cea09b4dc2c0da3e1c68373936f5
Author: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
Date:   Fri Feb 5 13:58:20 2016 +0000

    ide: ahci: reset ncq object to unused on error

    When processing NCQ commands, AHCI device emulation prepares a
    NCQ transfer object; To which an aio control block(aiocb) object
    is assigned in 'execute_ncq_command'. In case, when the NCQ
    command is invalid, the 'aiocb' object is not assigned, and NCQ
    transfer object is left as 'used'. This leads to a use after
    free kind of error in 'bdrv_aio_cancel_async' via 'ahci_reset_port'.
    Reset NCQ transfer object to 'unused' to avoid it.

    [Maintainer edit: s/ACHI/AHCI/ in the commit message. --js]

    Reported-by: Qinghao Tang <luodalongde@xxxxxxxxx>
    Signed-off-by: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
    Reviewed-by: John Snow <jsnow@xxxxxxxxxx>
    Message-id: 1452282511-4116-1-git-send-email-ppandit@xxxxxxxxxx
    Signed-off-by: John Snow <jsnow@xxxxxxxxxx>
    Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>

commit 8067f9c7ff1456e464640be558a03e1d198af78a
Author: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
Date:   Thu Dec 31 17:05:27 2015 +0530

    net: ne2000: fix bounds check in ioport operations

    While doing ioport r/w operations, ne2000 device emulation suffers
    from OOB r/w errors. Update respective array bounds check to avoid
    OOB access.

    Reported-by: Ling Liu <liuling-it@xxxxxx>
    Cc: qemu-stable@xxxxxxxxxx
    Signed-off-by: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
    Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>

commit 3a28ed2d1ca6e3204393350fa39833be896033d0
Author: P J P <ppandit@xxxxxxxxxx>
Date:   Mon Dec 21 15:13:13 2015 +0530

    scsi: initialise info object with appropriate size

    While processing controller 'CTRL_GET_INFO' command, the routine
    'megasas_ctrl_get_info' overflows the '&info' object size. Use its
    appropriate size to null initialise it.

    Reported-by: Qinghao Tang <luodalongde@xxxxxxxxx>
    Signed-off-by: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
    Message-Id: <alpine.LFD.2.20.1512211501420.22471@wniryva>
    Cc: qemu-stable@xxxxxxxxxx
    Signed-off-by: Paolo Bonzini <pbonzini@xxxxxxxxxx>
    Signed-off-by: P J P <ppandit@xxxxxxxxxx>

commit 3f71820abe33f7f32c5983c6b88afc4a992e3c89
Author: P J P <ppandit@xxxxxxxxxx>
Date:   Tue Dec 15 12:27:54 2015 +0530

    net: vmxnet3: avoid memory leakage in activate_device

    Vmxnet3 device emulator does not check if the device is active
    before activating it, also it did not free the transmit & receive
    buffers while deactivating the device, thus resulting in memory
    leakage on the host. This patch fixes both these issues to avoid
    host memory leakage.

    Reported-by: Qinghao Tang <luodalongde@xxxxxxxxx>
    Reviewed-by: Dmitry Fleytman <dmitry@xxxxxxxxxx>
    Signed-off-by: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
    Cc: qemu-stable@xxxxxxxxxx
    Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>

commit 3d84bde9aa0d8af7c2b78b5c7737e76ed3f4b177
Author: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
Date:   Thu Dec 3 18:54:17 2015 +0530

    ui: vnc: avoid floating point exception

    While sending 'SetPixelFormat' messages to a VNC server,
    the client could set the 'red-max', 'green-max' and 'blue-max'
    values to be zero. This leads to a floating point exception in
    write_png_palette while doing frame buffer updates.

    Reported-by: Lian Yihan <lianyihan@xxxxxx>
    Signed-off-by: Prasad J Pandit <pjp@xxxxxxxxxxxxxxxxx>
    Reviewed-by: Gerd Hoffmann <kraxel@xxxxxxxxxx>
    Signed-off-by: Peter Maydell <peter.maydell@xxxxxxxxxx>

commit e331500ea4e69ec8376b012d39aef2bcba84cb81
Author: Laszlo Ersek <lersek@xxxxxxxxxx>
Date:   Tue Jan 19 14:17:20 2016 +0100

    e1000: eliminate infinite loops on out-of-bounds transfer start

    The start_xmit() and e1000_receive_iov() functions implement DMA transfers
    iterating over a set of descriptors that the guest's e1000 driver
    prepares:

    - the TDLEN and RDLEN registers store the total size of the descriptor
      area,

    - while the TDH and RDH registers store the offset (in whole tx / rx
      descriptors) into the area where the transfer is supposed to start.

    Each time a descriptor is processed, the TDH and RDH register is bumped
    (as appropriate for the transfer direction).

    QEMU already contains logic to deal with bogus transfers submitted by the
    guest:

    - Normally, the transmit case wants to increase TDH from its initial value
      to TDT. (TDT is allowed to be numerically smaller than the initial TDH
      value; wrapping at or above TDLEN bytes to zero is normal.) The failsafe
      that QEMU currently has here is a check against reaching the original
      TDH value again -- a complete wraparound, which should never happen.

    - In the receive case RDH is increased from its initial value until
      "total_size" bytes have been received; preferably in a single step, or
      in "s->rxbuf_size" byte steps, if the latter is smaller. However, null
      RX descriptors are skipped without receiving data, while RDH is
      incremented just the same. QEMU tries to prevent an infinite loop
      (processing only null RX descriptors) by detecting whether RDH assumes
      its original value during the loop. (Again, wrapping from RDLEN to 0 is
      normal.)

    What both directions miss is that the guest could program TDLEN and RDLEN
    so low, and the initial TDH and RDH so high, that these registers will
    immediately be truncated to zero, and then never reassume their initial
    values in the loop -- a full wraparound will never occur.

    The condition that expresses this is:

      xdh_start >= s->mac_reg[XDLEN] / sizeof(desc)

    i.e., TDH or RDH start out after the last whole rx or tx descriptor that
    fits into the TDLEN or RDLEN sized area.

    This condition could be checked before we enter the loops, but
    pci_dma_read() / pci_dma_write() knows how to fill in buffers safely for
    bogus DMA addresses, so we just extend the existing failsafes with the
    above condition.

    This is CVE-2016-1981.

    upstream-commit-id: dd793a74882477ca38d49e191110c17dfee51dcc

    Cc: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
    Cc: Petr Matousek <pmatouse@xxxxxxxxxx>
    Cc: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
    Cc: Prasad Pandit <ppandit@xxxxxxxxxx>
    Cc: Michael Roth <mdroth@xxxxxxxxxxxxxxxxxx>
    Cc: Jason Wang <jasowang@xxxxxxxxxx>
    Cc: qemu-stable@xxxxxxxxxx
    RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1296044
    Signed-off-by: Laszlo Ersek <lersek@xxxxxxxxxx>
    Reviewed-by: Jason Wang <jasowang@xxxxxxxxxx>
    Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>
    Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>

commit 7891bba284582bbf963f1bdcdaba334dcaa086c5
Author: Roger Pau Monne <roger.pau@xxxxxxxxxx>
Date:   Fri Nov 13 17:38:06 2015 +0000

    xen: fix usage of xc_domain_create in domain builder

    Due to the addition of HVMlite and the requirement to always provide a
    valid xc_domain_configuration_t, xc_domain_create now always takes an arch
    domain config, which can be NULL in order to mimic previous behaviour.

    Add a small stub called xen_domain_create that encapsulates the correct
    call to xc_domain_create depending on the libxc version detected.

    Signed-off-by: Roger Pau Monné <roger.pau@xxxxxxxxxx>
    Acked-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
    Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.