[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v9 17/25] implement the cmdline for COLO
Add a new option -c to the command 'xl remus'. If you want to use COLO HA instead of Remus HA, please use -c option. Update man pages to reflect the addition of a new option to 'xl remus' command. Also add a new option -c to the internal command 'xl migrate-receive'. Signed-off-by: Wen Congyang <wency@xxxxxxxxxxxxxx> Signed-off-by: Yang Hongyang <hongyang.yang@xxxxxxxxxxxx> --- docs/man/xl.pod.1 | 12 +++++++-- tools/libxl/libxl.c | 23 ++++++++++++++++-- tools/libxl/xl_cmdimpl.c | 62 ++++++++++++++++++++++++++++++++++++----------- tools/libxl/xl_cmdtable.c | 4 ++- 4 files changed, 82 insertions(+), 19 deletions(-) diff --git a/docs/man/xl.pod.1 b/docs/man/xl.pod.1 index 4279c7c..1c6dd87 100644 --- a/docs/man/xl.pod.1 +++ b/docs/man/xl.pod.1 @@ -447,12 +447,15 @@ Print huge (!) amount of debug during the migration process. =item B<remus> [I<OPTIONS>] I<domain-id> I<host> -Enable Remus HA for domain. By default B<xl> relies on ssh as a transport -mechanism between the two hosts. +Enable Remus HA or COLO HA for domain. By default B<xl> relies on ssh as a +transport mechanism between the two hosts. N.B: Remus support in xl is still in experimental (proof-of-concept) phase. Disk replication support is limited to DRBD disks. + COLO support in xl is still in experimental (proof-of-concept) phase. + There is no support for network or disk at the moment. + B<OPTIONS> =over 4 @@ -498,6 +501,11 @@ Disable network output buffering. Requires enabling unsafe mode. Disable disk replication. Requires enabling unsafe mode. +=item B<-c> + +Enable COLO HA. This conflicts with B<-i> and B<-b>, and memory +checkpoint compression must be disabled. + =back =item B<pause> I<domain-id> diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c index 7d227d7..ca6bca1 100644 --- a/tools/libxl/libxl.c +++ b/tools/libxl/libxl.c @@ -851,12 +851,28 @@ int libxl_domain_remus_start(libxl_ctx *ctx, libxl_domain_remus_info *info, goto out; } + /* The caller must set this defbool */ + if (libxl_defbool_is_default(info->colo)) { + LOG(ERROR, "colo mode must be enabled/disabled"); + rc = ERROR_FAIL; + goto out; + } + libxl_defbool_setdefault(&info->allow_unsafe, false); libxl_defbool_setdefault(&info->blackhole, false); - libxl_defbool_setdefault(&info->compression, true); + libxl_defbool_setdefault(&info->compression, + !libxl_defbool_val(info->colo)); libxl_defbool_setdefault(&info->netbuf, true); libxl_defbool_setdefault(&info->diskbuf, true); + if (libxl_defbool_val(info->colo)) { + if (libxl_defbool_val(info->compression)) { + LOG(ERROR, "cannot use memory checkpoint compression in COLO mode"); + rc = ERROR_FAIL; + goto out; + } + } + if (!libxl_defbool_val(info->allow_unsafe) && (libxl_defbool_val(info->blackhole) || !libxl_defbool_val(info->netbuf) || @@ -878,7 +894,10 @@ int libxl_domain_remus_start(libxl_ctx *ctx, libxl_domain_remus_info *info, dss->live = 1; dss->debug = 0; dss->remus = info; - dss->checkpointed_stream = LIBXL_CHECKPOINTED_STREAM_REMUS; + if (libxl_defbool_val(info->colo)) + dss->checkpointed_stream = LIBXL_CHECKPOINTED_STREAM_COLO; + else + dss->checkpointed_stream = LIBXL_CHECKPOINTED_STREAM_REMUS; assert(info); diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c index 6580b59..70b8b82 100644 --- a/tools/libxl/xl_cmdimpl.c +++ b/tools/libxl/xl_cmdimpl.c @@ -4435,6 +4435,8 @@ static void migrate_receive(int debug, int daemonize, int monitor, char rc_buf; char *migration_domname; struct domain_create dom_info; + const char *ha = checkpointed == LIBXL_CHECKPOINTED_STREAM_COLO ? + "COLO" : "Remus"; signal(SIGPIPE, SIG_IGN); /* if we get SIGPIPE we'd rather just have it as an error */ @@ -4455,6 +4457,9 @@ static void migrate_receive(int debug, int daemonize, int monitor, dom_info.send_fd = send_fd; dom_info.migration_domname_r = &migration_domname; dom_info.checkpointed_stream = checkpointed; + if (checkpointed == LIBXL_CHECKPOINTED_STREAM_COLO) + /* COLO uses stdout to send control message to master */ + dom_info.quiet = 1; rc = create_domain(&dom_info); if (rc < 0) { @@ -4467,11 +4472,12 @@ static void migrate_receive(int debug, int daemonize, int monitor, switch (checkpointed) { case LIBXL_CHECKPOINTED_STREAM_REMUS: + case LIBXL_CHECKPOINTED_STREAM_COLO: /* If we are here, it means that the sender (primary) has crashed. * TODO: Split-Brain Check. */ - fprintf(stderr, "migration target: Remus Failover for domain %u\n", - domid); + fprintf(stderr, "migration target: %s Failover for domain %u\n", + ha, domid); /* * If domain renaming fails, lets just continue (as we need the domain @@ -4487,16 +4493,20 @@ static void migrate_receive(int debug, int daemonize, int monitor, rc = libxl_domain_rename(ctx, domid, migration_domname, common_domname); if (rc) - fprintf(stderr, "migration target (Remus): " + fprintf(stderr, "migration target (%s): " "Failed to rename domain from %s to %s:%d\n", - migration_domname, common_domname, rc); + ha, migration_domname, common_domname, rc); } + if (checkpointed == LIBXL_CHECKPOINTED_STREAM_COLO) + /* The guest is running after failover in COLO mode */ + exit(rc ? -ERROR_FAIL: 0); + rc = libxl_domain_unpause(ctx, domid); if (rc) - fprintf(stderr, "migration target (Remus): " + fprintf(stderr, "migration target (%s): " "Failed to unpause domain %s (id: %u):%d\n", - common_domname, domid, rc); + ha, common_domname, domid, rc); exit(rc ? -ERROR_FAIL: 0); default: @@ -4644,7 +4654,7 @@ int main_migrate_receive(int argc, char **argv) libxl_checkpointed_stream checkpointed = LIBXL_CHECKPOINTED_STREAM_NONE; int opt; - SWITCH_FOREACH_OPT(opt, "Fedr", NULL, "migrate-receive", 0) { + SWITCH_FOREACH_OPT(opt, "Fedrc", NULL, "migrate-receive", 0) { case 'F': daemonize = 0; break; @@ -4658,6 +4668,9 @@ int main_migrate_receive(int argc, char **argv) case 'r': checkpointed = LIBXL_CHECKPOINTED_STREAM_REMUS; break; + case 'c': + checkpointed = LIBXL_CHECKPOINTED_STREAM_COLO; + break; } if (argc-optind != 0) { @@ -8023,11 +8036,8 @@ int main_remus(int argc, char **argv) int config_len; memset(&r_info, 0, sizeof(libxl_domain_remus_info)); - /* Defaults */ - r_info.interval = 200; - libxl_defbool_setdefault(&r_info.blackhole, false); - SWITCH_FOREACH_OPT(opt, "Fbundi:s:N:e", NULL, "remus", 2) { + SWITCH_FOREACH_OPT(opt, "Fbundi:s:N:ec", NULL, "remus", 2) { case 'i': r_info.interval = atoi(optarg); break; @@ -8055,11 +8065,32 @@ int main_remus(int argc, char **argv) case 'e': daemonize = 0; break; + case 'c': + libxl_defbool_set(&r_info.colo, true); } domid = find_domain(argv[optind]); host = argv[optind + 1]; + /* Defaults */ + libxl_defbool_setdefault(&r_info.blackhole, false); + libxl_defbool_setdefault(&r_info.colo, false); + if (!libxl_defbool_val(r_info.colo) && !r_info.interval) + r_info.interval = 200; + + if (libxl_defbool_val(r_info.colo)) { + if (r_info.interval || libxl_defbool_val(r_info.blackhole)) { + perror("Option -c conflicts with -i or -b"); + exit(-1); + } + + if (libxl_defbool_is_default(r_info.compression)) { + perror("COLO can't be used with memory compression. " + "Disable memory checkpoint compression now..."); + libxl_defbool_set(&r_info.compression, false); + } + } + if (!r_info.netbufscript) r_info.netbufscript = default_remus_netbufscript; @@ -8074,8 +8105,9 @@ int main_remus(int argc, char **argv) if (!ssh_command[0]) { rune = host; } else { - xasprintf(&rune, "exec %s %s xl migrate-receive -r %s", + xasprintf(&rune, "exec %s %s xl migrate-receive %s %s", ssh_command, host, + libxl_defbool_val(r_info.colo) ? "-c" : "-r", daemonize ? "" : " -e"); } @@ -8103,7 +8135,8 @@ int main_remus(int argc, char **argv) * domain to force failover */ if (libxl_domain_info(ctx, 0, domid)) { - fprintf(stderr, "Remus: Primary domain has been destroyed.\n"); + fprintf(stderr, "%s: Primary domain has been destroyed.\n", + libxl_defbool_val(r_info.colo) ? "COLO" : "Remus"); close(send_fd); return 0; } @@ -8115,7 +8148,8 @@ int main_remus(int argc, char **argv) if (rc == ERROR_GUEST_TIMEDOUT) fprintf(stderr, "Failed to suspend domain at primary.\n"); else { - fprintf(stderr, "Remus: Backup failed? resuming domain at primary.\n"); + fprintf(stderr, "%s: Backup failed? resuming domain at primary.\n", + libxl_defbool_val(r_info.colo) ? "COLO" : "Remus"); libxl_domain_resume(ctx, domid, 1, 0); } diff --git a/tools/libxl/xl_cmdtable.c b/tools/libxl/xl_cmdtable.c index fdc1ac6..b6b630c 100644 --- a/tools/libxl/xl_cmdtable.c +++ b/tools/libxl/xl_cmdtable.c @@ -499,7 +499,9 @@ struct cmd_spec cmd_table[] = { "-b Replicate memory checkpoints to /dev/null (blackhole).\n" " Works only in unsafe mode.\n" "-n Disable network output buffering. Works only in unsafe mode.\n" - "-d Disable disk replication. Works only in unsafe mode." + "-d Disable disk replication. Works only in unsafe mode.\n" + "-c Enable COLO HA. It is conflict with -i and -b, and memory\n" + " checkpoint must be disabled" }, #endif { "devd", -- 2.5.0 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |