[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] Skylake: VT-d and other error messages



Looking through the output of 'xl dmesg' on a Skylake system (i5-6600K), I found a number of error messages that I do not encounter on a Haswell-based system. I have tried two motherboards from different manufacturers, with pretty much the same results. Below are some of the unexpected messages:

Not enabling x2APIC (upon firmware request)
...
mwait-idle: does not run on family 6 model 94
...
[VT-D] iommu.c:875: iommu_fault_status: Primary Pending Fault
[VT-D] INTR-REMAP: Request device [0000:f0:1f.0] fault index 0, iommu reg = ffff82c000201000
(on motherboard 1) [VT-D] INTR-REMAP: reason 22 - Present field in the IRTE entry is clear
(on motherboard 2) [VT-D] INTR-REMAP: reason 25 - Blocked a compatibility format interrupt request

This leads to a few questions:
1) Is there some reason x2APIC should not be enabled on Skylake? What consequence, if any, is there not having x2APIC enabled?
2) Should mwait-idle be available on Skylake?
3) What about the IOMMU errors on Skylake - are they a concern?

Thank you,
Eric
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.