|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [RESEND][PATCH V9 3/7] libxl: add pvusb API
Add pvusb APIs, including:
- attach/detach (create/destroy) virtual usb controller.
- attach/detach usb device
- list usb controller and usb devices
- some other helper functions
Signed-off-by: Chunyan Liu <cyliu@xxxxxxxx>
Signed-off-by: Simon Cao <caobosimon@xxxxxxxxx>
---
changes:
- update naming, all places indicating usb controller named
as usbctrl, all places indicating usb device named as usbdev
- update DEFINE_DEVICE_REMOVE instead of creating a new
DEFINE_DEVICE_REMOVE_EXT
- use libxl__xs_read_checked instead of libxl__xs_read
- update local READ_SUBPATH(_INT) macros to include more common codes
- save drvpath before unbind
- get_assigned_devices: call libxl__device_usbdev_list_for_ctrl
instead of doing all things from scratch
- usb_interface_xenstore_encode: use special char to avoid confusion
- usb readdir_r instead of readdir
- check syscall errno
- remove usbinfo definition
- address other comments except:
libxl__device_usbdev_add/remove and do_usbdev_add/remove, in previous
discussion, we'd like to get usbctrlinfo once and pass usbctrlinfo to
do_usbdev_add/remove. However, during update, adding usbdev process
still needs to try twice to get usbctrlinfo. (Before set_default,
if usbctrl doesn't exist it doesn't doing getting usbctrlinfo actually;
after set_default, needs to get usbctrlinfo then). So, finally, just
change codes to make adding/removing process symmetrical.
tools/libxl/Makefile | 2 +-
tools/libxl/libxl.c | 50 +-
tools/libxl/libxl.h | 77 ++
tools/libxl/libxl_device.c | 5 +-
tools/libxl/libxl_internal.h | 18 +
tools/libxl/libxl_osdeps.h | 13 +
tools/libxl/libxl_pvusb.c | 1534 ++++++++++++++++++++++++++++++++++
tools/libxl/libxl_types.idl | 46 +
tools/libxl/libxl_types_internal.idl | 1 +
tools/libxl/libxl_utils.c | 18 +
tools/libxl/libxl_utils.h | 5 +
11 files changed, 1766 insertions(+), 3 deletions(-)
create mode 100644 tools/libxl/libxl_pvusb.c
diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index 6ff5bee..a36145a 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -103,7 +103,7 @@ LIBXL_OBJS = flexarray.o libxl.o libxl_create.o libxl_dm.o
libxl_pci.o \
libxl_stream_read.o libxl_stream_write.o \
libxl_save_callout.o _libxl_save_msgs_callout.o \
libxl_qmp.o libxl_event.o libxl_fork.o \
- libxl_dom_suspend.o $(LIBXL_OBJS-y)
+ libxl_dom_suspend.o libxl_pvusb.o $(LIBXL_OBJS-y)
LIBXL_OBJS += libxl_genid.o
LIBXL_OBJS += _libxl_types.o libxl_flask.o _libxl_types_internal.o
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index eaa7d75..a479465 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -4144,6 +4144,36 @@ out:
return rc;
}
+static void libxl__initiate_device_disk_remove(libxl__egc *egc,
+ libxl__ao_device *aodev)
+{
+ return libxl__initiate_device_remove(egc, aodev);
+}
+
+static void libxl__initiate_device_nic_remove(libxl__egc *egc,
+ libxl__ao_device *aodev)
+{
+ return libxl__initiate_device_remove(egc, aodev);
+}
+
+static void libxl__initiate_device_vtpm_remove(libxl__egc *egc,
+ libxl__ao_device *aodev)
+{
+ return libxl__initiate_device_remove(egc, aodev);
+}
+
+static void libxl__initiate_device_vkb_remove(libxl__egc *egc,
+ libxl__ao_device *aodev)
+{
+ return libxl__initiate_device_remove(egc, aodev);
+}
+
+static void libxl__initiate_device_vfb_remove(libxl__egc *egc,
+ libxl__ao_device *aodev)
+{
+ return libxl__initiate_device_remove(egc, aodev);
+}
+
/******************************************************************************/
/* Macro for defining device remove/destroy functions in a compact way */
@@ -4158,6 +4188,8 @@ out:
* libxl_device_vkb_destroy
* libxl_device_vfb_remove
* libxl_device_vfb_destroy
+ * libxl_device_usbctrl_remove
+ * libxl_device_usbctrl_destroy
*/
#define DEFINE_DEVICE_REMOVE(type, removedestroy, f) \
int libxl_device_##type##_##removedestroy(libxl_ctx *ctx, \
@@ -4179,7 +4211,7 @@ out:
aodev->dev = device; \
aodev->callback = device_addrm_aocomplete; \
aodev->force = f; \
- libxl__initiate_device_remove(egc, aodev); \
+ libxl__initiate_device_##type##_remove(egc, aodev); \
\
out: \
if (rc) return AO_CREATE_FAIL(rc); \
@@ -4209,6 +4241,10 @@ DEFINE_DEVICE_REMOVE(vfb, destroy, 1)
DEFINE_DEVICE_REMOVE(vtpm, remove, 0)
DEFINE_DEVICE_REMOVE(vtpm, destroy, 1)
+/* usbctrl */
+DEFINE_DEVICE_REMOVE(usbctrl, remove, 0)
+DEFINE_DEVICE_REMOVE(usbctrl, destroy, 1)
+
/* channel/console hotunplug is not implemented. There are 2 possibilities:
* 1. add support for secondary consoles to xenconsoled
* 2. dynamically add/remove qemu chardevs via qmp messages. */
@@ -4222,6 +4258,8 @@ DEFINE_DEVICE_REMOVE(vtpm, destroy, 1)
* libxl_device_disk_add
* libxl_device_nic_add
* libxl_device_vtpm_add
+ * libxl_device_usbctrl_add
+ * libxl_device_usbdev_add
*/
#define DEFINE_DEVICE_ADD(type) \
@@ -4253,6 +4291,12 @@ DEFINE_DEVICE_ADD(nic)
/* vtpm */
DEFINE_DEVICE_ADD(vtpm)
+/* usbctrl */
+DEFINE_DEVICE_ADD(usbctrl)
+
+/* usb */
+DEFINE_DEVICE_ADD(usbdev)
+
#undef DEFINE_DEVICE_ADD
/******************************************************************************/
@@ -6794,6 +6838,10 @@ int libxl_retrieve_domain_configuration(libxl_ctx *ctx,
uint32_t domid,
MERGE(pci, pcidevs, COMPARE_PCI, {});
+ MERGE(usbctrl, usbctrls, COMPARE_USBCTRL, {});
+
+ MERGE(usbdev, usbdevs, COMPARE_USB, {});
+
/* Take care of removable device. We maintain invariant in the
* insert / remove operation so that:
* 1. if xenstore is "empty" while JSON is not, the result
diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index 168fedd..609d068 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -123,6 +123,12 @@
#define LIBXL_HAVE_DOMAIN_NODEAFFINITY 1
/*
+ * LIBXL_HAVE_PVUSB indicates functions for plugging in USB devices
+ * through pvusb -- both hotplug and at domain creation time..
+ */
+#define LIBXL_HAVE_PVUSB 1
+
+/*
* LIBXL_HAVE_BUILDINFO_HVM_VENDOR_DEVICE indicates that the
* libxl_vendor_device field is present in the hvm sections of
* libxl_domain_build_info. This field tells libxl which
@@ -1418,6 +1424,77 @@ int libxl_cdrom_insert(libxl_ctx *ctx, uint32_t domid,
libxl_device_disk *disk,
const libxl_asyncop_how *ao_how)
LIBXL_EXTERNAL_CALLERS_ONLY;
+/*
+ * USB
+ *
+ * For each device removed or added, one of these protocols is available:
+ * - PV (i.e., PVUSB)
+ * - DEVICEMODEL (i.e, qemu)
+ *
+ * PV is available for either PV or HVM domains. DEVICEMODEL is only
+ * available for HVM domains. The caller can additionally specify
+ * "AUTO", in which case the library will try to determine the best
+ * protocol automatically.
+ *
+ * At the moment, the only protocol implemented is PV.
+ *
+ * One can add/remove USB controllers to/from guest, and attach/detach USB
+ * devices to/from USB controllers.
+ *
+ * To add USB controllers and USB devices, one can adding USB controllers
+ * first and then attaching USB devices to some USB controller, or adding
+ * USB devices to guest directly, it will automatically create a USB
+ * controller for USB devices to attach.
+ *
+ * To remove USB controllers or USB devices, one can remove USB devices
+ * under USB controller one by one and then remove USB controller, or
+ * remove USB controller directly, it will remove all USB devices under
+ * it automatically.
+ *
+ */
+/* USB Controllers*/
+int libxl_device_usbctrl_add(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ const libxl_asyncop_how *ao_how)
+ LIBXL_EXTERNAL_CALLERS_ONLY;
+
+int libxl_device_usbctrl_remove(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ const libxl_asyncop_how *ao_how)
+ LIBXL_EXTERNAL_CALLERS_ONLY;
+
+int libxl_device_usbctrl_destroy(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ const libxl_asyncop_how *ao_how)
+ LIBXL_EXTERNAL_CALLERS_ONLY;
+
+libxl_device_usbctrl *libxl_device_usbctrl_list(libxl_ctx *ctx,
+ uint32_t domid, int *num);
+
+void libxl_device_usbctrl_list_free(libxl_device_usbctrl *list, int nr);
+
+
+int libxl_device_usbctrl_getinfo(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl_usbctrlinfo *usbctrlinfo);
+
+/* USB Devices */
+
+int libxl_device_usbdev_add(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbdev *usbdev,
+ const libxl_asyncop_how *ao_how)
+ LIBXL_EXTERNAL_CALLERS_ONLY;
+
+int libxl_device_usbdev_remove(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbdev *usbdev,
+ const libxl_asyncop_how *ao_how)
+ LIBXL_EXTERNAL_CALLERS_ONLY;
+
+libxl_device_usbdev *
+libxl_device_usbdev_list(libxl_ctx *ctx, uint32_t domid, int *num);
+
+void libxl_device_usbdev_list_free(libxl_device_usbdev *list, int nr);
+
/* Network Interfaces */
int libxl_device_nic_add(libxl_ctx *ctx, uint32_t domid, libxl_device_nic *nic,
const libxl_asyncop_how *ao_how)
diff --git a/tools/libxl/libxl_device.c b/tools/libxl/libxl_device.c
index 8bb5e93..6715c16 100644
--- a/tools/libxl/libxl_device.c
+++ b/tools/libxl/libxl_device.c
@@ -676,7 +676,10 @@ void libxl__devices_destroy(libxl__egc *egc,
libxl__devices_remove_state *drs)
aodev->action = LIBXL__DEVICE_ACTION_REMOVE;
aodev->dev = dev;
aodev->force = drs->force;
- libxl__initiate_device_remove(egc, aodev);
+ if (dev->backend_kind == LIBXL__DEVICE_KIND_VUSB)
+ libxl__initiate_device_usbctrl_remove(egc, aodev);
+ else
+ libxl__initiate_device_remove(egc, aodev);
}
}
}
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 7aff237..5b70c6e 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -2569,6 +2569,14 @@ _hidden void libxl__device_vtpm_add(libxl__egc *egc,
uint32_t domid,
libxl_device_vtpm *vtpm,
libxl__ao_device *aodev);
+_hidden void libxl__device_usbctrl_add(libxl__egc *egc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl__ao_device *aodev);
+
+_hidden void libxl__device_usbdev_add(libxl__egc *egc, uint32_t domid,
+ libxl_device_usbdev *usbdev,
+ libxl__ao_device *aodev);
+
/* Internal function to connect a vkb device */
_hidden int libxl__device_vkb_add(libxl__gc *gc, uint32_t domid,
libxl_device_vkb *vkb);
@@ -2601,6 +2609,13 @@ _hidden void libxl__wait_device_connection(libxl__egc*,
_hidden void libxl__initiate_device_remove(libxl__egc *egc,
libxl__ao_device *aodev);
+_hidden int libxl__device_from_usbctrl(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl__device *device);
+
+_hidden void libxl__initiate_device_usbctrl_remove(libxl__egc *egc,
+ libxl__ao_device *aodev);
+
/*
* libxl__get_hotplug_script_info returns the args and env that should
* be passed to the hotplug script for the requested device.
@@ -3958,6 +3973,9 @@ static inline void libxl__update_config_vtpm(libxl__gc
*gc,
#define COMPARE_PCI(a, b) ((a)->func == (b)->func && \
(a)->bus == (b)->bus && \
(a)->dev == (b)->dev)
+#define COMPARE_USB(a, b) ((a)->ctrl == (b)->ctrl && \
+ (a)->port == (b)->port)
+#define COMPARE_USBCTRL(a, b) ((a)->devid == (b)->devid)
/* DEVICE_ADD
*
diff --git a/tools/libxl/libxl_osdeps.h b/tools/libxl/libxl_osdeps.h
index d9661c9..802c762 100644
--- a/tools/libxl/libxl_osdeps.h
+++ b/tools/libxl/libxl_osdeps.h
@@ -24,6 +24,8 @@
#define _GNU_SOURCE
#if defined(__NetBSD__)
+#define SYSFS_USB_DEV "/sys/bus/usb/devices"
+#define SYSFS_USBBACK_DRIVER "/kern/xen/usb"
#define SYSFS_PCI_DEV "/sys/bus/pci/devices"
#define SYSFS_PCIBACK_DRIVER "/kern/xen/pci"
#define NETBACK_NIC_NAME "xvif%ui%d"
@@ -31,6 +33,8 @@
#elif defined(__OpenBSD__)
#include <util.h>
#elif defined(__linux__)
+#define SYSFS_USB_DEV "/sys/bus/usb/devices"
+#define SYSFS_USBBACK_DRIVER "/sys/bus/usb/drivers/usbback"
#define SYSFS_PCI_DEV "/sys/bus/pci/devices"
#define SYSFS_PCIBACK_DRIVER "/sys/bus/pci/drivers/pciback"
#define NETBACK_NIC_NAME "vif%u.%d"
@@ -38,6 +42,8 @@
#elif defined(__sun__)
#include <stropts.h>
#elif defined(__FreeBSD__)
+#define SYSFS_USB_DEV "/dev/null"
+#define SYSFS_USBBACK_DRIVER "/dev/null"
#define SYSFS_PCI_DEV "/dev/null"
#define SYSFS_PCIBACK_DRIVER "/dev/null"
#define NETBACK_NIC_NAME "xnb%u.%d"
@@ -45,6 +51,13 @@
#include <sys/endian.h>
#endif
+#ifndef SYSFS_USBBACK_DRIVER
+#error define SYSFS_USBBACK_DRIVER for your platform
+#endif
+#ifndef SYSFS_USB_DEV
+#error define SYSFS_USB_DEV for your platform
+#endif
+
#ifndef SYSFS_PCIBACK_DRIVER
#error define SYSFS_PCIBACK_DRIVER for your platform
#endif
diff --git a/tools/libxl/libxl_pvusb.c b/tools/libxl/libxl_pvusb.c
new file mode 100644
index 0000000..e35c6b5
--- /dev/null
+++ b/tools/libxl/libxl_pvusb.c
@@ -0,0 +1,1534 @@
+/*
+ * Copyright (C) 2015 SUSE LINUX Products GmbH, Nuernberg, Germany.
+ * Author Chunyan Liu <cyliu@xxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_osdeps.h" /* must come before any other headers */
+
+#include "libxl_internal.h"
+#include <inttypes.h>
+
+#define USBBACK_INFO_PATH "/libxl/usbback"
+
+#define USBHUB_CLASS_CODE 9
+
+static int libxl__device_usbctrl_setdefault(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl)
+{
+ int rc;
+ libxl_domain_type domtype = libxl__domain_type(gc, domid);
+
+ if (!usbctrl->version)
+ usbctrl->version = 2;
+
+ if (!usbctrl->ports)
+ usbctrl->ports = 8;
+
+ if (usbctrl->type == LIBXL_USBCTRL_TYPE_AUTO) {
+ if (domtype == LIBXL_DOMAIN_TYPE_PV) {
+ usbctrl->type = LIBXL_USBCTRL_TYPE_PV;
+ } else if (domtype == LIBXL_DOMAIN_TYPE_HVM) {
+ /* FIXME: See if we can detect PV frontend */
+ usbctrl->type = LIBXL_USBCTRL_TYPE_DEVICEMODEL;
+ }
+ }
+
+ rc = libxl__resolve_domid(gc, usbctrl->backend_domname,
+ &usbctrl->backend_domid);
+ return rc;
+}
+
+int libxl__device_from_usbctrl(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl__device *device)
+{
+ device->backend_devid = usbctrl->devid;
+ device->backend_domid = usbctrl->backend_domid;
+ device->backend_kind = LIBXL__DEVICE_KIND_VUSB;
+ device->devid = usbctrl->devid;
+ device->domid = domid;
+ device->kind = LIBXL__DEVICE_KIND_VUSB;
+
+ return 0;
+}
+
+/* Add usbctrl information to xenstore.
+ *
+ * Adding a usb controller will add a new 'vusb' device in xenstore, and
+ * add corresponding frontend, backend information to it. According to
+ * "update_json", decide wether to update json config file.
+ */
+static int libxl__device_usbctrl_add_xenstore(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ bool update_json)
+{
+ libxl__device *device;
+ flexarray_t *front;
+ flexarray_t *back;
+ xs_transaction_t t = XBT_NULL;
+ int i, rc;
+ libxl_domain_config d_config;
+ libxl_device_usbctrl usbctrl_saved;
+ libxl__domain_userdata_lock *lock = NULL;
+
+ libxl_domain_config_init(&d_config);
+ libxl_device_usbctrl_init(&usbctrl_saved);
+ libxl_device_usbctrl_copy(CTX, &usbctrl_saved, usbctrl);
+
+ GCNEW(device);
+ rc = libxl__device_from_usbctrl(gc, domid, usbctrl, device);
+ if (rc) goto out;
+
+ front = flexarray_make(gc, 4, 1);
+ back = flexarray_make(gc, 12, 1);
+
+ flexarray_append_pair(back, "frontend-id", GCSPRINTF("%d", domid));
+ flexarray_append_pair(back, "online", "1");
+ flexarray_append_pair(back, "state",
+ GCSPRINTF("%d", XenbusStateInitialising));
+ flexarray_append_pair(back, "type",
+ (char *)libxl_usbctrl_type_to_string(usbctrl->type));
+ flexarray_append_pair(back, "usb-ver", GCSPRINTF("%d", usbctrl->version));
+ flexarray_append_pair(back, "num-ports", GCSPRINTF("%d", usbctrl->ports));
+ flexarray_append_pair(back, "port", "");
+ for (i = 0; i < usbctrl->ports; i++)
+ flexarray_append_pair(back, GCSPRINTF("port/%d", i + 1), "");
+
+ flexarray_append_pair(front, "backend-id",
+ GCSPRINTF("%d", usbctrl->backend_domid));
+ flexarray_append_pair(front, "state",
+ GCSPRINTF("%d", XenbusStateInitialising));
+
+ if (update_json) {
+ lock = libxl__lock_domain_userdata(gc, domid);
+ if (!lock) {
+ rc = ERROR_LOCK_FAIL;
+ goto out;
+ }
+
+ rc = libxl__get_domain_configuration(gc, domid, &d_config);
+ if (rc) goto out;
+
+ DEVICE_ADD(usbctrl, usbctrls, domid, &usbctrl_saved,
+ COMPARE_USBCTRL, &d_config);
+ }
+
+ for (;;) {
+ rc = libxl__xs_transaction_start(gc, &t);
+ if (rc) goto out;
+
+ rc = libxl__device_exists(gc, t, device);
+ if (rc < 0) goto out;
+ if (rc == 1) {
+ /* already exists in xenstore */
+ LOG(ERROR, "device already exists in xenstore");
+ rc = ERROR_DEVICE_EXISTS;
+ goto out;
+ }
+
+ if (update_json) {
+ rc = libxl__set_domain_configuration(gc, domid, &d_config);
+ if (rc) goto out;
+ }
+
+ libxl__device_generic_add(gc, t, device,
+ libxl__xs_kvs_of_flexarray(gc, back, back->count),
+ libxl__xs_kvs_of_flexarray(gc, front, front->count),
+ NULL);
+
+ rc = libxl__xs_transaction_commit(gc, &t);
+ if (!rc) break;
+ if (rc < 0) goto out;
+ }
+
+out:
+ libxl__xs_transaction_abort(gc, &t);
+ if (lock) libxl__unlock_domain_userdata(lock);
+ libxl_device_usbctrl_dispose(&usbctrl_saved);
+ libxl_domain_config_dispose(&d_config);
+ return rc;
+}
+
+/* AO operation to add a usb controller.
+ *
+ * Generally, it does:
+ * 1) fill in necessary usb controler information with default value
+ * 2) write usb controller frontend/backend info to xenstore, update json
+ * config file if necessary.
+ * 3) wait for device connection. PVUSB frontend and backend driver will
+ * probe xenstore paths and build connection between frontend and backend.
+ *
+ * Before calling this function, aodev should be properly filled:
+ * aodev->ao, aodev->callback, aodev->update_json, ...
+ */
+void libxl__device_usbctrl_add(libxl__egc *egc, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl__ao_device *aodev)
+{
+ STATE_AO_GC(aodev->ao);
+ libxl__device *device;
+ int rc;
+
+ rc = libxl__device_usbctrl_setdefault(gc, domid, usbctrl);
+ if (rc < 0) goto out;
+
+ if (usbctrl->devid == -1) {
+ usbctrl->devid = libxl__device_nextid(gc, domid, "vusb");
+ if (usbctrl->devid < 0) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ if (usbctrl->type != LIBXL_USBCTRL_TYPE_PV) {
+ LOG(ERROR, "Unsupported USB controller type");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__device_usbctrl_add_xenstore(gc, domid, usbctrl,
+ aodev->update_json);
+ if (rc) goto out;
+
+ GCNEW(device);
+ rc = libxl__device_from_usbctrl(gc, domid, usbctrl, device);
+ if (rc) goto out;
+
+ aodev->dev = device;
+ aodev->action = LIBXL__DEVICE_ACTION_ADD;
+ libxl__wait_device_connection(egc, aodev);
+ return;
+
+out:
+ aodev->rc = rc;
+ aodev->callback(egc, aodev);
+ return;
+}
+
+static int libxl__device_usbdev_list_for_usbctrl(libxl__gc *gc, uint32_t domid,
+ libxl_devid usbctrl,
+ libxl_device_usbdev **usbdevs,
+ int *num);
+
+static int libxl__device_usbdev_remove(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbdev *usbdev);
+
+/* AO function to remove a usb controller.
+ *
+ * Generally, it does:
+ * 1) check if the usb controller exists or not
+ * 2) remove all usb devices under controller
+ * 3) remove usb controller information from xenstore
+ *
+ * Before calling this function, aodev should be properly filled:
+ * aodev->ao, aodev->dev, aodev->callback, ...
+ */
+void libxl__initiate_device_usbctrl_remove(libxl__egc *egc,
+ libxl__ao_device *aodev)
+{
+ STATE_AO_GC(aodev->ao);
+ libxl_ctx *ctx = CTX;
+ libxl_device_usbdev *usbdevs = NULL;
+ int num_usbdev = 0;
+ int i, rc;
+ uint32_t domid = ao->domid;
+ int usbctrl_devid = aodev->dev->devid;
+ libxl_device_usbctrl usbctrl;
+ libxl_usbctrlinfo usbctrlinfo;
+
+ libxl_device_usbctrl_init(&usbctrl);
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+ usbctrl.devid = usbctrl_devid;
+
+ rc = libxl_device_usbctrl_getinfo(ctx, domid, &usbctrl, &usbctrlinfo);
+ if (rc) goto out;
+
+ if (usbctrlinfo.type != LIBXL_USBCTRL_TYPE_PV) {
+ LOG(ERROR, "Unsupported USB controller type");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ /* Remove usb devices first */
+ rc = libxl__device_usbdev_list_for_usbctrl(gc, domid, usbctrl_devid,
+ &usbdevs, &num_usbdev);
+ if (rc) goto out;
+
+ for (i = 0; i < num_usbdev; i++) {
+ if (libxl__device_usbdev_remove(gc, domid, &usbdevs[i])) {
+ LOG(ERROR, "libxl__device_usbdev_remove failed: controller %d, "
+ "port %d", usbdevs[i].ctrl, usbdevs[i].port);
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+
+ /* Remove usbctrl */
+ return libxl__initiate_device_remove(egc, aodev);
+
+out:
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ aodev->rc = rc;
+ aodev->callback(egc, aodev);
+ return;
+}
+
+libxl_device_usbctrl *
+libxl_device_usbctrl_list(libxl_ctx *ctx, uint32_t domid, int *num)
+{
+ GC_INIT(ctx);
+ libxl_device_usbctrl *usbctrls = NULL;
+ char *path = NULL;
+ char **entry = NULL;
+ unsigned int nentries = 0;
+
+ *num = 0;
+
+ path = GCSPRINTF("%s/device/vusb",
+ libxl__xs_get_dompath(gc, domid));
+ entry = libxl__xs_directory(gc, XBT_NULL, path, &nentries);
+
+ if (entry && nentries) {
+ usbctrls = libxl__zalloc(NOGC, sizeof(*usbctrls) * nentries);
+ libxl_device_usbctrl *usbctrl;
+ libxl_device_usbctrl *end = usbctrls + nentries;
+ for (usbctrl = usbctrls;
+ usbctrl < end;
+ usbctrl++, entry++, (*num)++) {
+ const char *tmp, *be_path, *fe_path;
+ int ret;
+
+ libxl_device_usbctrl_init(usbctrl);
+ usbctrl->devid = atoi(*entry);
+
+#define READ_SUBPATH(path, subpath) ({ \
+ ret = libxl__xs_read_checked(gc, XBT_NULL, \
+ GCSPRINTF("%s/" subpath, path), \
+ &tmp); \
+ if (ret) goto out; \
+ (char *)tmp; \
+ })
+
+#define READ_SUBPATH_INT(path, subpath) ({ \
+ ret = libxl__xs_read_checked(gc, XBT_NULL, \
+ GCSPRINTF("%s/" subpath, path), \
+ &tmp); \
+ if (ret) goto out; \
+ tmp ? atoi(tmp) : -1; \
+ })
+
+ fe_path = GCSPRINTF("%s/%s", path, *entry);
+ be_path = READ_SUBPATH(fe_path, "backend");
+ usbctrl->backend_domid = READ_SUBPATH_INT(fe_path, "backend-id");
+ usbctrl->version = READ_SUBPATH_INT(be_path, "usb-ver");
+ usbctrl->ports = READ_SUBPATH_INT(be_path, "num-ports");
+ libxl_usbctrl_type_from_string(READ_SUBPATH(be_path, "type"),
+ &usbctrl->type);
+
+#undef READ_SUBPATH
+#undef READ_SUBPATH_INT
+ }
+ }
+
+ GC_FREE;
+ return usbctrls;
+
+out:
+ LOG(ERROR, "Unable to list USB Controllers");
+ libxl_device_usbctrl_list_free(usbctrls, *num);
+ GC_FREE;
+ *num = 0;
+ return NULL;
+}
+
+int libxl_device_usbctrl_getinfo(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbctrl *usbctrl,
+ libxl_usbctrlinfo *usbctrlinfo)
+{
+ GC_INIT(ctx);
+ const char *dompath, *fe_path, *be_path, *tmp;
+ int rc;
+
+ usbctrlinfo->devid = usbctrl->devid;
+
+#define READ_SUBPATH(path, subpath) ({ \
+ rc = libxl__xs_read_checked(gc, XBT_NULL, \
+ GCSPRINTF("%s/" subpath, path), \
+ &tmp); \
+ if (rc) goto out; \
+ (char *)tmp; \
+ })
+
+#define READ_SUBPATH_INT(path, subpath) ({ \
+ rc = libxl__xs_read_checked(gc, XBT_NULL, \
+ GCSPRINTF("%s/" subpath, path), \
+ &tmp); \
+ if (rc) goto out; \
+ tmp ? atoi(tmp) : -1; \
+ })
+
+ dompath = libxl__xs_get_dompath(gc, domid);
+ fe_path = GCSPRINTF("%s/device/vusb/%d", dompath, usbctrl->devid);
+ be_path = READ_SUBPATH(fe_path, "backend");
+ usbctrlinfo->backend = libxl__strdup(NOGC, be_path);
+ usbctrlinfo->backend_id = READ_SUBPATH_INT(fe_path, "backend-id");
+ usbctrlinfo->state = READ_SUBPATH_INT(fe_path, "state");
+ usbctrlinfo->evtch = READ_SUBPATH_INT(fe_path, "event-channel");
+ usbctrlinfo->ref_urb = READ_SUBPATH_INT(fe_path, "urb-ring-ref");
+ usbctrlinfo->ref_conn = READ_SUBPATH_INT(fe_path, "urb-ring-ref");
+ tmp = READ_SUBPATH(be_path, "frontend");
+ usbctrlinfo->frontend = libxl__strdup(NOGC, tmp);
+ usbctrlinfo->frontend_id = READ_SUBPATH_INT(be_path, "frontend-id");
+ usbctrlinfo->ports = READ_SUBPATH_INT(be_path, "num-ports");
+ usbctrlinfo->version = READ_SUBPATH_INT(be_path, "usb-ver");;
+ tmp = READ_SUBPATH(be_path, "type");
+ libxl_usbctrl_type_from_string(tmp, &usbctrlinfo->type);
+
+#undef READ_SUBPATH
+#undef READ_SUBPATH_INT
+
+ rc = 0;
+
+out:
+ GC_FREE;
+ return rc;
+}
+
+int libxl_devid_to_device_usbctrl(libxl_ctx *ctx,
+ uint32_t domid,
+ int devid,
+ libxl_device_usbctrl *usbctrl)
+{
+ libxl_device_usbctrl *usbctrls;
+ int nb = 0;
+ int i, rc;
+
+ usbctrls = libxl_device_usbctrl_list(ctx, domid, &nb);
+ if (!usbctrls)
+ return ERROR_FAIL;
+
+ rc = ERROR_FAIL;
+ for (i = 0; i < nb; i++) {
+ if (devid == usbctrls[i].devid) {
+ libxl_device_usbctrl_copy(ctx, usbctrl, &usbctrls[i]);
+ rc = 0;
+ break;
+ }
+ }
+
+ libxl_device_usbctrl_list_free(usbctrls, nb);
+ return rc;
+}
+
+static char *usbdev_busaddr_to_busid(libxl__gc *gc, int bus, int addr)
+{
+ DIR *dir;
+ char *busid = NULL;
+
+ /* invalid hostbus or hostaddr */
+ if (bus < 1 || addr < 1)
+ return NULL;
+
+ dir = opendir(SYSFS_USB_DEV);
+ if (!dir) {
+ LOGE(ERROR, "opendir failed: '%s'", SYSFS_USB_DEV);
+ return NULL;
+ }
+
+ size_t need = offsetof(struct dirent, d_name) +
+ pathconf(SYSFS_USB_DEV, _PC_NAME_MAX) + 1;
+ struct dirent *de_buf = libxl__zalloc(gc, need);
+ struct dirent *de;
+
+ for (;;) {
+ char *filename;
+ void *buf;
+ int busnum = -1;
+ int devnum = -1;
+
+ int r = readdir_r(dir, de_buf, &de);
+ if (r) {
+ LOGE(ERROR, "failed to readdir %s", SYSFS_USB_DEV);
+ break;
+ }
+ if (!de)
+ break;
+
+ if (!strcmp(de->d_name, ".") ||
+ !strcmp(de->d_name, ".."))
+ continue;
+
+ filename = GCSPRINTF(SYSFS_USB_DEV"/%s/devnum", de->d_name);
+ if (!libxl__read_sysfs_file_contents(gc, filename, &buf, NULL))
+ devnum = atoi(buf);
+
+ filename = GCSPRINTF(SYSFS_USB_DEV"/%s/busnum", de->d_name);
+ if (!libxl__read_sysfs_file_contents(gc, filename, &buf, NULL))
+ busnum = atoi(buf);
+
+ if (bus == busnum && addr == devnum) {
+ busid = libxl__strdup(gc, de->d_name);
+ break;
+ }
+ }
+
+ closedir(dir);
+ return busid;
+}
+
+static int usbdev_busaddr_from_busid(libxl__gc *gc, const char *busid,
+ uint8_t *bus, uint8_t *addr)
+{
+ char *filename;
+ void *buf;
+
+ filename = GCSPRINTF(SYSFS_USB_DEV"/%s/busnum", busid);
+ if (!libxl__read_sysfs_file_contents(gc, filename, &buf, NULL))
+ *bus = atoi((char *)buf);
+ else
+ return ERROR_FAIL;
+
+ filename = GCSPRINTF(SYSFS_USB_DEV"/%s/devnum", busid);
+ if (!libxl__read_sysfs_file_contents(gc, filename, &buf, NULL))
+ *addr = atoi((char *)buf);
+ else
+ return ERROR_FAIL;
+
+ return 0;
+}
+
+static int get_assigned_devices(libxl__gc *gc,
+ libxl_device_usbdev **list, int *num)
+{
+ char **domlist;
+ unsigned int ndom = 0;
+ int i, j, k;
+ int rc;
+
+ *list = NULL;
+ *num = 0;
+
+ domlist = libxl__xs_directory(gc, XBT_NULL, "/local/domain", &ndom);
+ for (i = 0; i < ndom; i++) {
+ char *path;
+ char **usbctrls;
+ unsigned int nc = 0;
+ uint32_t domid = atoi(domlist[i]);
+
+ path = GCSPRINTF("%s/device/vusb", libxl__xs_get_dompath(gc, domid));
+ usbctrls = libxl__xs_directory(gc, XBT_NULL, path, &nc);
+
+ for (j = 0; j < nc; j++) {
+ libxl_device_usbdev *tmp = NULL;
+ int nd = 0;
+
+ rc = libxl__device_usbdev_list_for_usbctrl(gc, domid,
+ atoi(usbctrls[j]),
+ &tmp, &nd);
+ if (rc) goto out;
+
+ if (!nd) continue;
+
+ GCREALLOC_ARRAY(*list, *num + nd);
+ for (k = 0; k < nd; k++) {
+ libxl_device_usbdev_copy(CTX, *list + *num, tmp + k);
+ (*num)++;
+ }
+ }
+ }
+
+ return 0;
+
+out:
+ LOG(ERROR, "fail to get assigned devices");
+ return rc;
+}
+
+static bool is_usbdev_in_array(libxl_device_usbdev *usbdevs, int num,
+ libxl_device_usbdev *usbdev)
+{
+ int i;
+
+ for (i = 0; i < num; i++) {
+ if (usbdevs[i].u.hostdev.hostbus == usbdev->u.hostdev.hostbus &&
+ usbdevs[i].u.hostdev.hostaddr == usbdev->u.hostdev.hostaddr)
+ return true;
+ }
+
+ return false;
+}
+
+/* check if USB device type is assignable */
+static bool is_usbdev_assignable(libxl__gc *gc, libxl_device_usbdev *usbdev)
+{
+ int classcode;
+ char *filename;
+ void *buf = NULL;
+ char *busid = NULL;
+
+ busid = usbdev_busaddr_to_busid(gc, usbdev->u.hostdev.hostbus,
+ usbdev->u.hostdev.hostaddr);
+ if (!busid) return false;
+
+ filename = GCSPRINTF(SYSFS_USB_DEV"/%s/bDeviceClass", busid);
+ if (libxl__read_sysfs_file_contents(gc, filename, &buf, NULL))
+ return false;
+
+ classcode = atoi(buf);
+ return classcode != USBHUB_CLASS_CODE;
+}
+
+/* get usb devices under certain usb controller */
+static int
+libxl__device_usbdev_list_for_usbctrl(libxl__gc *gc,
+ uint32_t domid,
+ libxl_devid usbctrl,
+ libxl_device_usbdev **usbdevs,
+ int *num)
+{
+ const char *fe_path, *be_path, *num_devs;
+ int n, i, rc;
+
+ *usbdevs = NULL;
+ *num = 0;
+
+ fe_path = GCSPRINTF("%s/device/vusb/%d",
+ libxl__xs_get_dompath(gc, domid), usbctrl);
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/backend", fe_path),
+ &be_path);
+ if (rc) goto out;
+
+ if (!be_path) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/num-ports", be_path),
+ &num_devs);
+ if (rc) goto out;
+
+ n = num_devs ? atoi(num_devs) : 0;
+
+ for (i = 0; i < n; i++) {
+ const char *busid;
+ libxl_device_usbdev *usbdev;
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/port/%d", be_path, i + 1),
+ &busid);
+ if (rc) goto out;
+
+ if (busid && strcmp(busid, "")) {
+ GCREALLOC_ARRAY(*usbdevs, *num + 1);
+ usbdev = *usbdevs + *num;
+ (*num)++;
+ libxl_device_usbdev_init(usbdev);
+ usbdev->ctrl = usbctrl;
+ usbdev->port = i + 1;
+ usbdev->type = LIBXL_USBDEV_TYPE_HOSTDEV;
+ rc = usbdev_busaddr_from_busid(gc, busid,
+ &usbdev->u.hostdev.hostbus,
+ &usbdev->u.hostdev.hostaddr);
+ if (rc) goto out;
+ }
+ }
+
+ rc = 0;
+
+out:
+ return rc;
+}
+
+/* get all usb devices of the domain */
+libxl_device_usbdev *
+libxl_device_usbdev_list(libxl_ctx *ctx, uint32_t domid, int *num)
+{
+ GC_INIT(ctx);
+ libxl_device_usbdev *usbdevs = NULL;
+ const char *path;
+ char **usbctrls;
+ unsigned int nc = 0;
+ int i, j;
+
+ *num = 0;
+
+ path = GCSPRINTF("%s/device/vusb",
+ libxl__xs_get_dompath(gc, domid));
+ usbctrls = libxl__xs_directory(gc, XBT_NULL, path, &nc);
+
+ for (i = 0; i < nc; i++) {
+ int r, nd = 0;
+ libxl_device_usbdev *tmp = NULL;
+
+ r = libxl__device_usbdev_list_for_usbctrl(gc, domid,
+ atoi(usbctrls[i]),
+ &tmp, &nd);
+ if (!r || !nd) continue;
+
+ usbdevs = libxl__realloc(NOGC, usbdevs,
+ sizeof(*usbdevs) * (*num + nd));
+ for (j = 0; j < nd; j++) {
+ libxl_device_usbdev_copy(ctx, usbdevs + *num, tmp + j);
+ (*num)++;
+ }
+ }
+
+ GC_FREE;
+ return usbdevs;
+}
+
+/* find first unused controller:port and give that to usb device */
+static int
+libxl__device_usbdev_set_default_usbctrl(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbdev *usbdev)
+{
+ libxl_device_usbctrl *usbctrls = NULL;
+ int numctrl = 0;
+ int i, j, rc;
+
+ usbctrls = libxl_device_usbctrl_list(CTX, domid, &numctrl);
+ if (!numctrl || !usbctrls) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = ERROR_FAIL;
+ for (i = 0; i < numctrl; i++) {
+ for (j = 0; j < usbctrls[i].ports; j++) {
+ const char *path, *tmp;
+
+ path = GCSPRINTF("%s/backend/vusb/%d/%d/port/%d",
+ libxl__xs_get_dompath(gc, LIBXL_TOOLSTACK_DOMID),
+ domid, usbctrls[i].devid, j + 1);
+ tmp = libxl__xs_read(gc, XBT_NULL, path);
+ if (tmp && !strcmp(tmp, "")) {
+ usbdev->ctrl = usbctrls[i].devid;
+ usbdev->port = j + 1;
+ rc = 0;
+ goto out;
+ }
+ }
+ }
+
+out:
+ libxl_device_usbctrl_list_free(usbctrls, numctrl);
+ return rc;
+}
+
+/* Fill in usb information with default value.
+ *
+ * Generally, it does:
+ * 1) if "controller" is not specified:
+ * - if "port" is not specified, try to find an available controller:port,
+ * if found, use that; otherwise, create a new controller, use this
+ * controller and its first port
+ * - if "port" is specified, report error.
+ * 2) if "controller" is specified, but port is not specified:
+ * try to find an available port under this controller, if found, use
+ * that, otherwise, report error.
+ * 3) if both "controller" and "port" are specified:
+ * check the controller:port is available, if not, report error.
+ */
+static int libxl__device_usbdev_setdefault(libxl__gc *gc,
+ uint32_t domid,
+ libxl_device_usbdev *usbdev,
+ bool update_json)
+{
+ int rc;
+
+ if (!usbdev->type)
+ usbdev->type = LIBXL_USBDEV_TYPE_HOSTDEV;
+
+ if (usbdev->ctrl == -1) {
+ if (usbdev->port) {
+ LOG(ERROR, "USB controller must be specified if you specify port");
+ return ERROR_INVAL;
+ }
+
+ rc = libxl__device_usbdev_set_default_usbctrl(gc, domid, usbdev);
+ /* If no existing controller to host this usb device, add a new one */
+ if (rc) {
+ libxl_device_usbctrl *usbctrl;
+
+ GCNEW(usbctrl);
+ libxl_device_usbctrl_init(usbctrl);
+ rc = libxl__device_usbctrl_setdefault(gc, domid, usbctrl);
+ if (rc < 0) goto out;
+
+ if (usbctrl->devid == -1) {
+ usbctrl->devid = libxl__device_nextid(gc, domid, "vusb");
+ if (usbctrl->devid < 0) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ rc = libxl__device_usbctrl_add_xenstore(gc, domid, usbctrl,
+ update_json);
+ if (rc) goto out;
+
+ usbdev->ctrl = usbctrl->devid;
+ usbdev->port = 1;
+ }
+ } else if (!usbdev->port) {
+ /* Valid port starts from 1. Choose port for us. */
+ int i, ports;
+ const char *fe_path, *be_path, *tmp;
+
+ fe_path = GCSPRINTF("%s/device/vusb/%d",
+ libxl__xs_get_dompath(gc, domid), usbdev->ctrl);
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/backend", fe_path),
&be_path);
+ if (rc) goto out;
+
+ if (!be_path) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/num-ports", be_path), &tmp);
+ if (rc) goto out;
+
+ ports = tmp ? atoi(tmp) : 0;
+
+ for (i = 0; i < ports; i++) {
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/port/%d", be_path, i +
1),
+ &tmp);
+ if (rc) goto out;
+
+ if (tmp && !strcmp(tmp, "")) {
+ usbdev->port = i + 1;
+ break;
+ }
+ }
+
+ if (!usbdev->port) {
+ LOG(ERROR, "No available port under specified controller");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ } else {
+ const char *be_path, *tmp;
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/device/vusb/%d/backend",
+ libxl__xs_get_dompath(gc, domid),
+ usbdev->ctrl),
+ &be_path);
+ if (rc) goto out;
+
+ if (!be_path) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/port/%d",
+ be_path, usbdev->port),
+ &tmp);
+ if (rc) goto out;
+
+ if (tmp && strcmp(tmp, "")) {
+ LOG(ERROR, "The controller port isn't available");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ rc = 0;
+
+out:
+ return rc;
+}
+
+/* Add usb information to xenstore
+ *
+ * Adding a usb device won't create new 'vusb' device, but only write
+ * the device busid to the controller:port in xenstore.
+ */
+static int libxl__device_usbdev_add_xenstore(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbdev *usbdev,
+ bool update_json)
+{
+ char *be_path, *busid;
+ int rc;
+ xs_transaction_t t = XBT_NULL;
+ libxl_domain_config d_config;
+ libxl_device_usbdev usbdev_saved;
+ libxl__domain_userdata_lock *lock = NULL;
+
+ libxl_domain_config_init(&d_config);
+ libxl_device_usbdev_init(&usbdev_saved);
+ libxl_device_usbdev_copy(CTX, &usbdev_saved, usbdev);
+
+ busid = usbdev_busaddr_to_busid(gc, usbdev->u.hostdev.hostbus,
+ usbdev->u.hostdev.hostaddr);
+ if (!busid) {
+ LOG(DEBUG, "Fail to get busid of usb device");
+ goto out;
+ }
+
+ if (update_json) {
+ lock = libxl__lock_domain_userdata(gc, domid);
+ if (!lock) {
+ rc = ERROR_LOCK_FAIL;
+ goto out;
+ }
+
+ rc = libxl__get_domain_configuration(gc, domid, &d_config);
+ if (rc) goto out;
+
+ DEVICE_ADD(usbdev, usbdevs, domid, &usbdev_saved,
+ COMPARE_USB, &d_config);
+ }
+
+ for (;;) {
+ rc = libxl__xs_transaction_start(gc, &t);
+ if (rc) goto out;
+
+ if (update_json) {
+ rc = libxl__set_domain_configuration(gc, domid, &d_config);
+ if (rc) goto out;
+ }
+
+ be_path = GCSPRINTF("%s/backend/vusb/%d/%d/port/%d",
+ libxl__xs_get_dompath(gc, LIBXL_TOOLSTACK_DOMID),
+ domid, usbdev->ctrl, usbdev->port);
+
+ LOG(DEBUG, "Adding usb device %s to xenstore: controller %d, port %d",
+ busid, usbdev->ctrl, usbdev->port);
+
+ if (libxl__xs_write_checked(gc, t, be_path, busid))
+ goto out;
+
+ rc = libxl__xs_transaction_commit(gc, &t);
+ if (!rc) break;
+ if (rc < 0) goto out;
+ }
+
+ rc = 0;
+
+out:
+ if (lock) libxl__unlock_domain_userdata(lock);
+ libxl_device_usbdev_dispose(&usbdev_saved);
+ libxl_domain_config_dispose(&d_config);
+ return rc;
+}
+
+static int libxl__device_usbdev_remove_xenstore(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbdev *usbdev)
+{
+ char *be_path;
+
+ be_path = GCSPRINTF("%s/backend/vusb/%d/%d/port/%d",
+ libxl__xs_get_dompath(gc, LIBXL_TOOLSTACK_DOMID),
+ domid, usbdev->ctrl, usbdev->port);
+
+ LOG(DEBUG, "Removing usb device from xenstore: controller %d, port %d",
+ usbdev->ctrl, usbdev->port);
+
+ return libxl__xs_write_checked(gc, XBT_NULL, be_path, "");
+}
+
+static char *usbdev_busid_from_ctrlport(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbdev *usbdev)
+{
+ return libxl__xs_read(gc, XBT_NULL,
+ GCSPRINTF("%s/backend/vusb/%d/%d/port/%d",
+ libxl__xs_get_dompath(gc, LIBXL_TOOLSTACK_DOMID),
+ domid, usbdev->ctrl, usbdev->port));
+}
+
+/* get original driver path of usb interface, stored in @drvpath */
+static int usbintf_get_drvpath(libxl__gc *gc, const char *intf, char **drvpath)
+{
+ char *spath, *dp = NULL;
+ struct stat st;
+ int rc;
+
+ spath = GCSPRINTF(SYSFS_USB_DEV"/%s/driver", intf);
+
+ rc = lstat(spath, &st);
+ if (rc == 0) {
+ /* Find the canonical path to the driver. */
+ dp = libxl__zalloc(gc, PATH_MAX);
+ dp = realpath(spath, dp);
+ } else if (errno != ENOENT) {
+ LOGE(ERROR, "lstat failed: '%s'", spath);
+ return ERROR_FAIL;
+ }
+
+ *drvpath = dp;
+
+ return 0;
+}
+
+static int sysfs_write_intf(libxl__gc *gc, const char *intf, const char *path)
+{
+ int rc, fd = -1;
+
+ fd = open(path, O_WRONLY);
+ if (fd < 0) {
+ LOGE(ERROR, "open file failed: '%s'", path);
+ return ERROR_FAIL;
+ }
+
+ rc = write(fd, intf, strlen(intf));
+ close(fd);
+ if (rc < 0) {
+ LOGE(ERROR, "write '%s' to '%s' failed", intf, path);
+ return errno;
+ }
+ if (rc != strlen(intf)) {
+ LOG(ERROR, "write '%s' to '%s' failed: incorrect write count",
+ intf, path);
+ return ERROR_FAIL;
+ }
+
+ return 0;
+}
+
+static int unbind_usbintf(libxl__gc *gc, const char *intf)
+{
+ char *path;
+
+ path = GCSPRINTF(SYSFS_USB_DEV"/%s/driver/unbind", intf);
+ return sysfs_write_intf(gc, intf, path);
+}
+
+static int bind_usbintf(libxl__gc *gc, const char *intf, const char *drvpath)
+{
+ char *path;
+ struct stat st;
+
+ path = GCSPRINTF("%s/%s", drvpath, intf);
+ /* if already bound, return */
+ if (!lstat(path, &st))
+ return 0;
+
+ path = GCSPRINTF("%s/bind", drvpath);
+ return sysfs_write_intf(gc, intf, path);
+}
+
+/* Is usb interface bound to usbback? */
+static int usbintf_is_assigned(libxl__gc *gc, char *intf)
+{
+ char *spath;
+ int rc;
+ struct stat st;
+
+ spath = GCSPRINTF(SYSFS_USBBACK_DRIVER"/%s", intf);
+ rc = lstat(spath, &st);
+
+ if (rc == 0)
+ return 1;
+ if (rc < 0 && errno == ENOENT)
+ return 0;
+ LOGE(ERROR, "Accessing %s", spath);
+ return -1;
+}
+
+static int usbdev_get_all_interfaces(libxl__gc *gc, const char *busid,
+ char ***intfs, int *num)
+{
+ DIR *dir;
+ char *buf;
+ int rc;
+
+ *intfs = NULL;
+ *num = 0;
+
+ buf = GCSPRINTF("%s:", busid);
+
+ dir = opendir(SYSFS_USB_DEV);
+ if (!dir) {
+ LOGE(ERROR, "opendir failed: '%s'", SYSFS_USB_DEV);
+ return ERROR_FAIL;
+ }
+
+ size_t need = offsetof(struct dirent, d_name) +
+ pathconf(SYSFS_USB_DEV, _PC_NAME_MAX) + 1;
+ struct dirent *de_buf = libxl__zalloc(gc, need);
+ struct dirent *de;
+
+ for (;;) {
+ int r = readdir_r(dir, de_buf, &de);
+
+ if (r) {
+ LOGE(ERROR, "failed to readdir %s", SYSFS_USB_DEV);
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ if (!de)
+ break;
+
+ if (!strcmp(de->d_name, ".") ||
+ !strcmp(de->d_name, ".."))
+ continue;
+
+ if (!strncmp(de->d_name, buf, strlen(buf))) {
+ GCREALLOC_ARRAY(*intfs, *num + 1);
+ (*intfs)[*num] = libxl__strdup(gc, de->d_name);
+ (*num)++;
+ }
+ }
+
+ rc = 0;
+
+out:
+ closedir(dir);
+ return rc;
+}
+
+/* Encode usb interface so that it could be written to xenstore as a key.
+ *
+ * Since xenstore key cannot include '.' or ':', we'll change '.' to '_',
+ * change ':' to '@'. For example, 3-1:2.1 will be encoded to 3-1@2_1.
+ * This will be used to save original driver of USB device to xenstore.
+ */
+static char *usb_interface_xenstore_encode(libxl__gc *gc, const char *busid)
+{
+ char *str = libxl__strdup(gc, busid);
+ int i, len = strlen(str);
+
+ for (i = 0; i < len; i++) {
+ if (str[i] == '.')
+ str[i] = '_';
+ if (str[i] == ':')
+ str[i] = '@';
+ }
+ return str;
+}
+
+/* Unbind USB device from "usbback" driver.
+ *
+ * If there are many interfaces under USB device, check each interface,
+ * unbind from "usbback" driver and rebind to its original driver.
+ */
+static int usbback_dev_unassign(libxl__gc *gc, const char *busid)
+{
+ char **intfs = NULL;
+ char *usbdev_encode = NULL;
+ char *path = NULL;
+ int i, num = 0;
+ int rc;
+
+ if (usbdev_get_all_interfaces(gc, busid, &intfs, &num) < 0)
+ return ERROR_FAIL;
+
+ usbdev_encode = usb_interface_xenstore_encode(gc, busid);
+
+ for (i = 0; i < num; i++) {
+ char *intf = intfs[i];
+ char *usbintf_encode = NULL;
+ const char *drvpath;
+
+ /* check if the USB interface is already bound to "usbback" */
+ if (usbintf_is_assigned(gc, intf) > 0) {
+ /* unbind interface from usbback driver */
+ if (unbind_usbintf(gc, intf) < 0) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ /* try to rebind USB interface to its originial driver.
+ * If rebinding failed, export warning so that user can
+ * handle it later.
+ */
+ usbintf_encode = usb_interface_xenstore_encode(gc, intf);
+ path = GCSPRINTF(USBBACK_INFO_PATH"/%s/%s/driver_path",
+ usbdev_encode, usbintf_encode);
+ rc = libxl__xs_read_checked(gc, XBT_NULL, path, &drvpath);
+ if (rc) continue;
+
+ if (drvpath && bind_usbintf(gc, intf, drvpath))
+ LOGE(WARN, "Couldn't rebind %s to %s", intf, drvpath);
+ }
+
+ /* finally, remove xenstore driver path */
+ path = GCSPRINTF(USBBACK_INFO_PATH"/%s", usbdev_encode);
+ libxl__xs_rm_checked(gc, XBT_NULL, path);
+ rc = 0;
+
+out:
+ return rc;
+}
+
+/* Bind USB device to "usbback" driver.
+ *
+ * If there are many interfaces under USB device, check each interface,
+ * unbind from original driver and bind to "usbback" driver.
+ */
+static int usbback_dev_assign(libxl__gc *gc, const char *busid)
+{
+ char **intfs = NULL;
+ int num = 0, i;
+ int rc;
+ char *usbdev_encode = NULL;
+
+ rc = usbdev_get_all_interfaces(gc, busid, &intfs, &num);
+ if (rc)
+ return rc;
+
+ usbdev_encode = usb_interface_xenstore_encode(gc, busid);
+
+ for (i = 0; i < num; i++) {
+ char *intf = intfs[i];
+ char *drvpath = NULL;
+
+ /* already assigned to usbback */
+ if (usbintf_is_assigned(gc, intf) > 0)
+ continue;
+
+ rc = usbintf_get_drvpath(gc, intf, &drvpath);
+ if (rc < 0) goto out;
+
+ if (drvpath) {
+ /* write driver path to xenstore for later rebinding */
+ char *usbintf_encode = NULL;
+ char *path;
+
+ usbintf_encode = usb_interface_xenstore_encode(gc, intf);
+ path = GCSPRINTF(USBBACK_INFO_PATH"/%s/%s/driver_path",
+ usbdev_encode, usbintf_encode);
+ if (libxl__xs_write_checked(gc, XBT_NULL, path, drvpath) < 0)
+ goto out;
+
+ /* unbind interface from original driver */
+ if (unbind_usbintf(gc, intf) < 0) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ /* bind interface to usbback */
+ if (bind_usbintf(gc, intf, SYSFS_USBBACK_DRIVER) < 0) {
+ LOG(ERROR, "Couldn't bind %s to %s", intf, SYSFS_USBBACK_DRIVER);
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
+ return 0;
+
+out:
+ /* some interfaces might be bound to usbback, unbind it and
+ * rebind it to its original driver
+ */
+ usbback_dev_unassign(gc, busid);
+ return rc;
+}
+
+static int do_usbdev_add(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbdev *usbdev,
+ bool update_json)
+{
+ int rc;
+ char *busid;
+ libxl_device_usbctrl usbctrl;
+ libxl_usbctrlinfo usbctrlinfo;
+
+ libxl_device_usbctrl_init(&usbctrl);
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+ usbctrl.devid = usbdev->ctrl;
+
+ rc = libxl_device_usbctrl_getinfo(CTX, domid, &usbctrl, &usbctrlinfo);
+ if (rc) goto out;
+
+ switch (usbctrlinfo.type) {
+ case LIBXL_USBCTRL_TYPE_PV:
+ busid = usbdev_busaddr_to_busid(gc, usbdev->u.hostdev.hostbus,
+ usbdev->u.hostdev.hostaddr);
+ if (!busid) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__device_usbdev_add_xenstore(gc, domid, usbdev, update_json);
+ if (rc) goto out;
+
+ rc = usbback_dev_assign(gc, busid);
+ if (rc) {
+ libxl__device_usbdev_remove_xenstore(gc, domid, usbdev);
+ goto out;
+ }
+ break;
+ case LIBXL_USBCTRL_TYPE_DEVICEMODEL:
+ default:
+ LOG(ERROR, "Unsupported usb controller type");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = 0;
+
+out:
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ return rc;
+}
+
+/* AO operation to add a usb device.
+ *
+ * Generally, it does:
+ * 1) check if the usb device type is assignable
+ * 2) check if the usb device is already assigned to a domain
+ * 3) add 'busid' of the usb device to xenstore contoller/port/.
+ * (PVUSB driver watches the xenstore changes and will detect that.)
+ * 4) unbind usb device from original driver and bind to usbback.
+ * If usb device has many interfaces, then:
+ * - unbind each interface from its original driver and bind to usbback.
+ * - store the original driver to xenstore for later rebinding when
+ * detaching the device.
+ *
+ * Before calling this function, aodev should be properly filled:
+ * aodev->ao, aodev->callback, aodev->update_json, ...
+ */
+void libxl__device_usbdev_add(libxl__egc *egc, uint32_t domid,
+ libxl_device_usbdev *usbdev,
+ libxl__ao_device *aodev)
+{
+ STATE_AO_GC(aodev->ao);
+ int rc;
+ libxl_device_usbdev *assigned;
+ int num_assigned;
+ libxl_device_usbctrl usbctrl;
+ libxl_usbctrlinfo usbctrlinfo;
+
+ libxl_device_usbctrl_init(&usbctrl);
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+
+ /* Currently only support adding USB device from Dom0 backend.
+ * So, if USB controller is specified, check its backend domain,
+ * if it's not Dom0, report error.
+ */
+ if (usbdev->ctrl != -1) {
+ usbctrl.devid = usbdev->ctrl;
+ rc = libxl_device_usbctrl_getinfo(CTX, domid, &usbctrl, &usbctrlinfo);
+ if (rc) goto out;
+
+ if (usbctrlinfo.backend_id != LIBXL_TOOLSTACK_DOMID) {
+ LOG(ERROR, "Don't support adding USB device from non-Dom0
backend");
+ rc = ERROR_INVAL;
+ goto out;
+ }
+ }
+
+ /* check usb device is assignable type */
+ if (!is_usbdev_assignable(gc, usbdev)) {
+ LOG(ERROR, "USB device is not assignable.");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ /* check usb device is already assigned */
+ rc = get_assigned_devices(gc, &assigned, &num_assigned);
+ if (rc) {
+ LOG(ERROR, "cannot determine if device is assigned,"
+ " refusing to continue");
+ goto out;
+ }
+
+ if (is_usbdev_in_array(assigned, num_assigned, usbdev)) {
+ LOG(ERROR, "USB device already attached to a domain");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ /* fill default values, e.g, if usbdev->ctrl and usbdev->port
+ * not specified, choose available controller:port and fill in. */
+ rc = libxl__device_usbdev_setdefault(gc, domid, usbdev,
+ aodev->update_json);
+ if (rc) goto out;
+
+ /* do actual adding usb device operation */
+ rc = do_usbdev_add(gc, domid, usbdev, aodev->update_json);
+
+out:
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ aodev->rc = rc;
+ aodev->callback(egc, aodev);
+ return;
+}
+
+static int do_usbdev_remove(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbdev *usbdev)
+{
+ int rc;
+ char *busid;
+ libxl_device_usbctrl usbctrl;
+ libxl_usbctrlinfo usbctrlinfo;
+
+ libxl_device_usbctrl_init(&usbctrl);
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+ usbctrl.devid = usbdev->ctrl;
+
+ rc = libxl_device_usbctrl_getinfo(CTX, domid, &usbctrl, &usbctrlinfo);
+ if (rc) goto out;
+
+ switch (usbctrlinfo.type) {
+ case LIBXL_USBCTRL_TYPE_PV:
+ busid = usbdev_busid_from_ctrlport(gc, domid, usbdev);
+ if (!busid) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__device_usbdev_remove_xenstore(gc, domid, usbdev);
+ if (rc) goto out;
+
+ rc = usbback_dev_unassign(gc, busid);
+ if (rc) {
+ /* Till here, usb device information is already removed
+ * from xenstore, usb list couldn't list it any more.
+ * If unassign usb device from usbback failed, export
+ * warning only so that user could handle driver status
+ * later.
+ */
+ LOG(WARN, "unbind usb device from usbback and rebind to its "
+ "original driver failed");
+ }
+ break;
+ case LIBXL_USBCTRL_TYPE_DEVICEMODEL:
+ default:
+ LOG(ERROR, "Unsupported usb controller type");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = 0;
+
+out:
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ return rc;
+}
+
+/* Operation to remove usb device.
+ *
+ * Generally, it does:
+ * 1) check if the usb device is assigned to the domain
+ * 2) remove the usb device from xenstore controller/port.
+ * 3) unbind usb device from usbback and rebind to its original driver.
+ * If usb device has many interfaces, do it to each interface.
+ */
+static int libxl__device_usbdev_remove(libxl__gc *gc, uint32_t domid,
+ libxl_device_usbdev *usbdev)
+{
+ libxl_usbctrlinfo usbctrlinfo;
+ libxl_device_usbctrl usbctrl;
+ int rc;
+
+ if (usbdev->ctrl < 0 || usbdev->port < 1) {
+ LOG(ERROR, "Invalid USB device");
+ return ERROR_FAIL;
+ }
+
+ libxl_device_usbctrl_init(&usbctrl);
+ libxl_usbctrlinfo_init(&usbctrlinfo);
+ usbctrl.devid = usbdev->ctrl;
+
+ rc = libxl_device_usbctrl_getinfo(CTX, domid, &usbctrl, &usbctrlinfo);
+ if (rc) goto out;
+
+ if (usbctrlinfo.backend_id != LIBXL_TOOLSTACK_DOMID) {
+ LOG(ERROR, "Don't support removing USB device from non-Dom0 backend");
+ rc = ERROR_INVAL;
+ goto out;
+ }
+
+ /* do actual removing usb device operation */
+ rc = do_usbdev_remove(gc, domid, usbdev);
+
+out:
+ libxl_device_usbctrl_dispose(&usbctrl);
+ libxl_usbctrlinfo_dispose(&usbctrlinfo);
+ return rc;
+}
+
+int libxl_device_usbdev_remove(libxl_ctx *ctx, uint32_t domid,
+ libxl_device_usbdev *usbdev,
+ const libxl_asyncop_how *ao_how)
+
+{
+ AO_CREATE(ctx, domid, ao_how);
+ int rc;
+
+ rc = libxl__device_usbdev_remove(gc, domid, usbdev);
+
+ libxl__ao_complete(egc, ao, rc);
+ return AO_INPROGRESS;
+}
+
+int libxl_ctrlport_to_device_usbdev(libxl_ctx *ctx,
+ uint32_t domid,
+ int ctrl,
+ int port,
+ libxl_device_usbdev *usbdev)
+{
+ GC_INIT(ctx);
+ const char *dompath, *be_path, *busid;
+ int rc;
+
+ dompath = libxl__xs_get_dompath(gc, domid);
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/device/vusb/%d/backend", dompath, ctrl),
+ &be_path);
+ if (rc) goto out;
+
+ if (!be_path) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/port/%d", be_path, port),
+ &busid);
+ if (rc) goto out;
+
+ if (!busid || !strcmp(busid, "")) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ usbdev->ctrl = ctrl;
+ usbdev->port = port;
+ usbdev->type = LIBXL_USBDEV_TYPE_HOSTDEV;
+ rc = usbdev_busaddr_from_busid(gc, busid,
+ &usbdev->u.hostdev.hostbus,
+ &usbdev->u.hostdev.hostaddr);
+
+out:
+ GC_FREE;
+ return rc;
+}
+/*
+ * Local variables:
+ * mode: C
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 4d78f86..ed7da81 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -603,6 +603,35 @@ libxl_device_rdm = Struct("device_rdm", [
("policy", libxl_rdm_reserve_policy),
])
+libxl_usbctrl_type = Enumeration("usbctrl_type", [
+ (0, "AUTO"),
+ (1, "PV"),
+ (2, "DEVICEMODEL"),
+ ])
+
+libxl_usbdev_type = Enumeration("usbdev_type", [
+ (1, "hostdev"),
+ ])
+
+libxl_device_usbctrl = Struct("device_usbctrl", [
+ ("type", libxl_usbctrl_type),
+ ("devid", libxl_devid),
+ ("version", integer),
+ ("ports", integer),
+ ("backend_domid", libxl_domid),
+ ("backend_domname", string),
+ ])
+
+libxl_device_usbdev = Struct("device_usbdev", [
+ ("ctrl", libxl_devid),
+ ("port", integer),
+ ("u", KeyedUnion(None, libxl_usbdev_type, "type",
+ [("hostdev", Struct(None, [
+ ("hostbus", uint8),
+ ("hostaddr", uint8)])),
+ ])),
+ ])
+
libxl_device_dtdev = Struct("device_dtdev", [
("path", string),
])
@@ -641,6 +670,8 @@ libxl_domain_config = Struct("domain_config", [
# a channel manifests as a console with a name,
# see docs/misc/channels.txt
("channels", Array(libxl_device_channel, "num_channels")),
+ ("usbctrls", Array(libxl_device_usbctrl, "num_usbctrls")),
+ ("usbdevs", Array(libxl_device_usbdev, "num_usbdevs")),
("on_poweroff", libxl_action_on_shutdown),
("on_reboot", libxl_action_on_shutdown),
@@ -684,6 +715,21 @@ libxl_vtpminfo = Struct("vtpminfo", [
("uuid", libxl_uuid),
], dir=DIR_OUT)
+libxl_usbctrlinfo = Struct("usbctrlinfo", [
+ ("type", libxl_usbctrl_type),
+ ("devid", libxl_devid),
+ ("version", integer),
+ ("ports", integer),
+ ("backend", string),
+ ("backend_id", uint32),
+ ("frontend", string),
+ ("frontend_id", uint32),
+ ("state", integer),
+ ("evtch", integer),
+ ("ref_urb", integer),
+ ("ref_conn", integer),
+ ], dir=DIR_OUT)
+
libxl_vcpuinfo = Struct("vcpuinfo", [
("vcpuid", uint32),
("cpu", uint32),
diff --git a/tools/libxl/libxl_types_internal.idl
b/tools/libxl/libxl_types_internal.idl
index 5e55685..696f5f8 100644
--- a/tools/libxl/libxl_types_internal.idl
+++ b/tools/libxl/libxl_types_internal.idl
@@ -22,6 +22,7 @@ libxl__device_kind = Enumeration("device_kind", [
(6, "VKBD"),
(7, "CONSOLE"),
(8, "VTPM"),
+ (9, "VUSB"),
])
libxl__console_backend = Enumeration("console_backend", [
diff --git a/tools/libxl/libxl_utils.c b/tools/libxl/libxl_utils.c
index 7f612a6..f7ba880 100644
--- a/tools/libxl/libxl_utils.c
+++ b/tools/libxl/libxl_utils.c
@@ -1314,6 +1314,24 @@ int libxl__random_bytes(libxl__gc *gc, uint8_t *buf,
size_t len)
return ret;
}
+void libxl_device_usbctrl_list_free(libxl_device_usbctrl *list, int nr)
+{
+ int i;
+
+ for (i = 0; i < nr; i++)
+ libxl_device_usbctrl_dispose(&list[i]);
+ free(list);
+}
+
+void libxl_device_usbdev_list_free(libxl_device_usbdev *list, int nr)
+{
+ int i;
+
+ for (i = 0; i < nr; i++)
+ libxl_device_usbdev_dispose(&list[i]);
+ free(list);
+}
+
/*
* Local variables:
* mode: C
diff --git a/tools/libxl/libxl_utils.h b/tools/libxl/libxl_utils.h
index 339ebdf..4495417 100644
--- a/tools/libxl/libxl_utils.h
+++ b/tools/libxl/libxl_utils.h
@@ -76,6 +76,11 @@ int libxl_uuid_to_device_vtpm(libxl_ctx *ctx, uint32_t domid,
libxl_uuid *uuid, libxl_device_vtpm *vtpm);
int libxl_devid_to_device_vtpm(libxl_ctx *ctx, uint32_t domid,
int devid, libxl_device_vtpm *vtpm);
+int libxl_devid_to_device_usbctrl(libxl_ctx *ctx, uint32_t domid,
+ int devid, libxl_device_usbctrl *usbctrl);
+int libxl_ctrlport_to_device_usbdev(libxl_ctx *ctx, uint32_t domid,
+ int ctrl, int port,
+ libxl_device_usbdev *usbdev);
int libxl_bitmap_alloc(libxl_ctx *ctx, libxl_bitmap *bitmap, int n_bits);
/* Allocated bimap is from malloc, libxl_bitmap_dispose() to be
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |