[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v2] minios: don't rely on specific page table allocation scheme



Today mini-os is making assumptions how the page tables it is started
with are being allocated. Especially it is using the number of page
table frames to calculate which is the first unmapped pfn.

Instead of relying on page table number assumptions just look into the
page tables to find the first pfn not already mapped.

Signed-off-by: Juergen Gross <jgross@xxxxxxxx>
---
Changes in V2:
- remove need_pt_frame() as it simplifies code (suggested by Wei Liu)

---
 arch/x86/mm.c         | 81 ++++++++++-----------------------------------------
 include/x86/arch_mm.h |  7 -----
 2 files changed, 15 insertions(+), 73 deletions(-)

diff --git a/arch/x86/mm.c b/arch/x86/mm.c
index 9c6d1b8..b828efc 100644
--- a/arch/x86/mm.c
+++ b/arch/x86/mm.c
@@ -132,61 +132,6 @@ static void new_pt_frame(unsigned long *pt_pfn, unsigned 
long prev_l_mfn,
 }
 
 /*
- * Checks if a pagetable frame is needed at 'level' to map a given
- * address. Note, this function is specific to the initial page table
- * building.
- */
-static int need_pt_frame(unsigned long va, int level)
-{
-    unsigned long hyp_virt_start = HYPERVISOR_VIRT_START;
-#if defined(__x86_64__)
-    unsigned long hyp_virt_end = HYPERVISOR_VIRT_END;
-#else
-    unsigned long hyp_virt_end = 0xffffffff;
-#endif
-
-    /* In general frames will _not_ be needed if they were already
-       allocated to map the hypervisor into our VA space */
-#if defined(__x86_64__)
-    if ( level == L3_FRAME )
-    {
-        if ( l4_table_offset(va) >= 
-             l4_table_offset(hyp_virt_start) &&
-             l4_table_offset(va) <= 
-             l4_table_offset(hyp_virt_end))
-            return 0;
-        return 1;
-    } 
-    else
-#endif
-
-    if ( level == L2_FRAME )
-    {
-#if defined(__x86_64__)
-        if ( l4_table_offset(va) >= 
-             l4_table_offset(hyp_virt_start) &&
-             l4_table_offset(va) <= 
-             l4_table_offset(hyp_virt_end))
-#endif
-            if ( l3_table_offset(va) >= 
-                 l3_table_offset(hyp_virt_start) &&
-                 l3_table_offset(va) <= 
-                 l3_table_offset(hyp_virt_end))
-                return 0;
-
-        return 1;
-    } 
-    else 
-        /* Always need l1 frames */
-        if ( level == L1_FRAME )
-            return 1;
-
-    printk("ERROR: Unknown frame level %d, hypervisor %llx,%llx\n", 
-           level, hyp_virt_start, hyp_virt_end);
-    return -1;
-}
-
-/*
  * Build the initial pagetable.
  */
 static void build_pagetable(unsigned long *start_pfn, unsigned long *max_pfn)
@@ -200,8 +145,8 @@ static void build_pagetable(unsigned long *start_pfn, 
unsigned long *max_pfn)
     int count = 0;
     int rc;
 
-    pfn_to_map = 
-        (start_info.nr_pt_frames - NOT_L1_FRAMES) * L1_PAGETABLE_ENTRIES;
+    pfn_to_map = (*start_pfn + L1_PAGETABLE_ENTRIES - 1) &
+                 ~(L1_PAGETABLE_ENTRIES - 1);
 
     if ( *max_pfn >= virt_to_pfn(HYPERVISOR_VIRT_START) )
     {
@@ -229,9 +174,8 @@ static void build_pagetable(unsigned long *start_pfn, 
unsigned long *max_pfn)
 #if defined(__x86_64__)
         offset = l4_table_offset(start_address);
         /* Need new L3 pt frame */
-        if ( !(start_address & L3_MASK) )
-            if ( need_pt_frame(start_address, L3_FRAME) ) 
-                new_pt_frame(&pt_pfn, pt_mfn, offset, L3_FRAME);
+        if ( !(tab[offset] & _PAGE_PRESENT) )
+            new_pt_frame(&pt_pfn, pt_mfn, offset, L3_FRAME);
 
         page = tab[offset];
         pt_mfn = pte_to_mfn(page);
@@ -239,18 +183,23 @@ static void build_pagetable(unsigned long *start_pfn, 
unsigned long *max_pfn)
 #endif
         offset = l3_table_offset(start_address);
         /* Need new L2 pt frame */
-        if ( !(start_address & L2_MASK) )
-            if ( need_pt_frame(start_address, L2_FRAME) )
-                new_pt_frame(&pt_pfn, pt_mfn, offset, L2_FRAME);
+        if ( !(tab[offset] & _PAGE_PRESENT) )
+            new_pt_frame(&pt_pfn, pt_mfn, offset, L2_FRAME);
 
         page = tab[offset];
         pt_mfn = pte_to_mfn(page);
         tab = to_virt(mfn_to_pfn(pt_mfn) << PAGE_SHIFT);
         offset = l2_table_offset(start_address);        
         /* Need new L1 pt frame */
-        if ( !(start_address & L1_MASK) )
-            if ( need_pt_frame(start_address, L1_FRAME) )
-                new_pt_frame(&pt_pfn, pt_mfn, offset, L1_FRAME);
+        if ( !(tab[offset] & _PAGE_PRESENT) )
+            new_pt_frame(&pt_pfn, pt_mfn, offset, L1_FRAME);
+        else if ( !(start_address & L1_MASK) )
+        {
+            /* Already mapped, skip this L1 entry. */
+            start_address += L1_PAGETABLE_ENTRIES << PAGE_SHIFT;
+            pfn_to_map += L1_PAGETABLE_ENTRIES;
+            continue;
+        }
 
         page = tab[offset];
         pt_mfn = pte_to_mfn(page);
diff --git a/include/x86/arch_mm.h b/include/x86/arch_mm.h
index 23cfca7..58f29fc 100644
--- a/include/x86/arch_mm.h
+++ b/include/x86/arch_mm.h
@@ -56,12 +56,6 @@
 
 #define L2_MASK  ((1UL << L3_PAGETABLE_SHIFT) - 1)
 
-/*
- * If starting from virtual address greater than 0xc0000000,
- * this value will be 2 to account for final mid-level page
- * directory which is always mapped in at this location.
- */
-#define NOT_L1_FRAMES           3
 #define PRIpte "016llx"
 #ifndef __ASSEMBLY__
 typedef uint64_t pgentry_t;
@@ -87,7 +81,6 @@ typedef uint64_t pgentry_t;
 #define L2_MASK  ((1UL << L3_PAGETABLE_SHIFT) - 1)
 #define L3_MASK  ((1UL << L4_PAGETABLE_SHIFT) - 1)
 
-#define NOT_L1_FRAMES           3
 #define PRIpte "016lx"
 #ifndef __ASSEMBLY__
 typedef unsigned long pgentry_t;
-- 
2.6.2


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.