[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] Crash in set_cpu_sibling_map() booting Xen 4.6.0 on Fusion



Xen staging-4.6 crashes when booting on VMware Fusion 8.0.2 (with VT-x/EPT enabled), with 4 virtual CPUs:

Loading xen-4.6-amd64.gz... ok
Loading vmlinuz-3.14.51-grsec-dock... ok
Loading initrd.img-3.14.51-grsec-dock... ok
(XEN) Xen version 4.6.1-pre (Debian 4.6.1~pre-1skyport1) (eswierk@xxxxxxxxxxxxxxxxxx) (gcc (Debian 4.9.3-4) 4.9.3) debug=n Thu Nov 19 17:05:27 PST 2015
(XEN) Bootloader: SYSLINUX 4.05 20140113
(XEN) Command line: console=com1,vga com1=115200 no-bootscrub dom0_mem=2048M,max:2048M maxcpus=4 loglvl=all cpuinfo=1
(XEN) Video information:
(XEN) ÂVGA is text mode 80x25, font 8x16
(XEN) Disc information:
(XEN) ÂFound 1 MBR signatures
(XEN) ÂFound 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) Â0000000000000000 - 000000000009f800 (usable)
(XEN) Â000000000009f800 - 00000000000a0000 (reserved)
(XEN) Â00000000000dc000 - 0000000000100000 (reserved)
(XEN) Â0000000000100000 - 00000000bfef0000 (usable)
(XEN) Â00000000bfef0000 - 00000000bfeff000 (ACPI data)
(XEN) Â00000000bfeff000 - 00000000bff00000 (ACPI NVS)
(XEN) Â00000000bff00000 - 00000000c0000000 (usable)
(XEN) Â00000000f0000000 - 00000000f8000000 (reserved)
(XEN) Â00000000fec00000 - 00000000fec10000 (reserved)
(XEN) Â00000000fee00000 - 00000000fee01000 (reserved)
(XEN) Â00000000fffe0000 - 0000000100000000 (reserved)
(XEN) Â0000000100000000 - 00000001c0000000 (usable)
(XEN) ACPI: RSDP 000F6A10, 0024 (r2 PTLTD )
(XEN) ACPI: XSDT BFEF030B, 0054 (r1 INTEL Â440BX Â Â 6040000 VMW Â 1324272)
(XEN) ACPI: FACP BFEFEE73, 00F4 (r4 INTEL Â440BX Â Â 6040000 PTL Â Â F4240)
(XEN) ACPI: DSDT BFEF05B1, E8C2 (r1 PTLTD ÂCustom  Â6040000 MSFT Â3000001)
(XEN) ACPI: FACS BFEFFFC0, 0040
(XEN) ACPI: BOOT BFEF0589, 0028 (r1 PTLTD Â$SBFTBL$ Â6040000 ÂLTP Â Â Â Â1)
(XEN) ACPI: APIC BFEF050F, 007A (r1 PTLTD Â APIC Â Â6040000 ÂLTP Â Â Â Â0)
(XEN) ACPI: MCFG BFEF04D3, 003C (r1 PTLTD Â$PCITBL$ Â6040000 ÂLTP Â Â Â Â1)
(XEN) ACPI: SRAT BFEF03C3, 0110 (r2 VMWARE MEMPLUG Â 6040000 VMW Â Â Â Â 1)
(XEN) ACPI: WAET BFEF039B, 0028 (r1 VMWARE VMW WAET Â6040000 VMW Â Â Â Â 1)
(XEN) System RAM: 6143MB (6291004kB)
(XEN) SRAT: PXM 0 -> APIC 00 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 02 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 04 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 06 -> Node 0
(XEN) SRAT: Node 0 PXM 0 0-a0000
(XEN) SRAT: Node 0 PXM 0 100000-10000000
(XEN) SRAT: Node 0 PXM 0 10000000-c0000000
(XEN) SRAT: Node 0 PXM 0 100000000-1c0000000
(XEN) NUMA: Allocated memnodemap from 1bd8fc000 - 1bd8fe000
(XEN) NUMA: Using 8 for the hash shift.
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f6a80
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x1008
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:1004,1:0], pm1x_evt[1:1000,1:0]
(XEN) ACPI: Â Â Â Â Â Â wakeup_vec[bfefffcc], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 6:6 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
(XEN) Processor #2 6:6 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
(XEN) Processor #4 6:6 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
(XEN) Processor #6 6:6 APIC version 21
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) Enabling APIC mode: ÂFlat. Using 1 I/O APICs
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X
(XEN) Not enabling x2APIC: depends on iommu_supports_eim.
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 6144K
(XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7
(XEN) CPU0: No MCE banks present. Machine check support disabled
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2592.811 MHz processor.
(XEN) Initing memory sharing.
(XEN) alt table ffff82d0802be010 -> ffff82d0802bf384
(XEN) PCI: MCFG configuration 0: base f0000000 segment 0000 buses 00 - 7f
(XEN) PCI: MCFG area at f0000000 reserved in E820
(XEN) PCI: Using MCFG for segment 0000 bus 00-7f
(XEN) I/O virtualisation disabled
(XEN) CPU0: Intel(R) Core(TM) i7-4960HQ CPU @ 2.60GHz stepping 01
(XEN) ENABLING IO-APIC IRQs
(XEN) Â-> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 3.579MHz ACPI PM Timer
(XEN) Allocated console ring of 32 KiB.
(XEN) mwait-idle: MWAIT substates: 0x10
(XEN) mwait-idle: v0.4 model 0x46
(XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) VMX: Supported advanced features:
(XEN) Â- APIC TPR shadow
(XEN) Â- Extended Page Tables (EPT)
(XEN) Â- Virtual-Processor Identifiers (VPID)
(XEN) Â- Virtual NMI
(XEN) Â- MSR direct-access bitmap
(XEN) Â- Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) not detected
(XEN) HVM: PVH mode not supported on this platform
(XEN) CPU 0 APIC 0 -> Node 0
(XEN) CPU 1 APIC 2 -> Node 0
(XEN) Booting processor 1/2 eip 8f000
(XEN) Initializing CPU#1
(XEN) CPU: Physical Processor ID: 2
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 6144K
(XEN) CPU1: No MCE banks present. Machine check support disabled
(XEN) CPU1: Intel(R) Core(TM) i7-4960HQ CPU @ 2.60GHz stepping 01
(XEN) CPU 2 APIC 4 -> Node 0
(XEN) Booting processor 2/4 eip 8f000
(XEN) Initializing CPU#2
(XEN) CPU: Physical Processor ID: 4
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 6144K
(XEN) CPU2: No MCE banks present. Machine check support disabled
(XEN) CPU2: Intel(R) Core(TM) i7-4960HQ CPU @ 2.60GHz stepping 01
(XEN) CPU 3 APIC 6 -> Node 0
(XEN) Booting processor 3/6 eip 8f000
(XEN) Initializing CPU#3
(XEN) CPU: Physical Processor ID: 6
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 6144K
(XEN) CPU3: No MCE banks present. Machine check support disabled
(XEN) CPU3: Intel(R) Core(TM) i7-4960HQ CPU @ 2.60GHz stepping 01
(XEN) ----[ Xen-4.6.1-pre Âx86_64 Âdebug=n ÂNot tainted ]----
(XEN) CPU: Â Â3
(XEN) RIP: Â Âe008:[<ffff82d08018302f>] set_cpu_sibling_map+0x3f/0x330
(XEN) RFLAGS: 0000000000010006 Â CONTEXT: hypervisor
(XEN) rax: 0000000000000001 Â rbx: 0000000000000000 Â rcx: 000000313d5b4080
(XEN) rdx: 0000000000000006 Â rsi: 0000000000000000 Â rdi: 0000000000000003
(XEN) rbp: 0000000000000300 Â rsp: ffff8301bd87fe90 Â r8: Âffff8301bd878000
(XEN) r9: Â000000313d5b4080 Â r10: 0000000000000001 Â r11: 0000000000000001
(XEN) r12: ffff82d0802fd500 Â r13: 0000000000000000 Â r14: 0000000000000000
(XEN) r15: 0000000000000003  cr0: 000000008005003b  cr4: 00000000001526a0
(XEN) cr3: 00000000bfc75000 Â cr2: 0000000000000001
(XEN) ds: 0000 Â es: 0000 Â fs: 0000 Â gs: 0000 Â ss: 0000 Â cs: e008
(XEN) Xen stack trace from rsp=ffff8301bd87fe90:
(XEN) Â Â00000003802fd800 0000000000000018 0000000000000000 0000010000000000
(XEN) Â Âffff82d0802fd800 0000000000000000 00000000000000c8 0000000000000003
(XEN) Â Â0000000000000000 0000000000000000 0000000000000000 ffff82d0801834dc
(XEN) Â Â0000000000000000 0000000000000001 0000000000000000 0000000000000000
(XEN) Â Â0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Â Â0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Â Â0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Â Â0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Â Â0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Â Â0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Â Â0000000000000000 0000000000000000 0000000000000003 ffff8300bfafc000
(XEN) Â Â000000313d5b4080 0000000000000000
(XEN) Xen call trace:
(XEN) Â Â[<ffff82d08018302f>] set_cpu_sibling_map+0x3f/0x330
(XEN) Â Â[<ffff82d0801834dc>] start_secondary+0x1bc/0x250
(XEN)Â
(XEN) Pagetable walk from 0000000000000001:
(XEN) ÂL4[0x000] = 00000001bd8f0063 ffffffffffffffff
(XEN) ÂL3[0x000] = 00000001bd8ef063 ffffffffffffffff
(XEN) ÂL2[0x000] = 00000001bd8ee063 ffffffffffffffffÂ
(XEN) ÂL1[0x000] = 0000000000000000 ffffffffffffffff
(XEN)Â
(XEN) ****************************************
(XEN) Panic on CPU 3:
(XEN) FATAL PAGE FAULT
(XEN) [error_code=0002]
(XEN) Faulting linear address: 0000000000000001
(XEN) ****************************************
(XEN)Â
(XEN) Reboot in five seconds...


The crash does not occur if I set maxcpus=3 on the Xen command line:

Loading xen-4.6-amd64.gz... ok
Loading vmlinuz-3.14.51-grsec-dock... ok
Loading initrd.img-3.14.51-grsec-dock... ok
(XEN) Xen version 4.6.1-pre (Debian 4.6.1~pre-1skyport1) (eswierk@xxxxxxxxxxxxxxxxxx) (gcc (Debian 4.9.3-4) 4.9.3) debug=n Thu Nov 19 17:05:27 PST 2015
(XEN) Bootloader: SYSLINUX 4.05 20140113
(XEN) Command line: console=com1,vga com1=115200 no-bootscrub dom0_mem=2048M,max:2048M maxcpus=3 loglvl=all cpuinfo=1
(XEN) Video information:
(XEN) ÂVGA is text mode 80x25, font 8x16
(XEN) Disc information:
(XEN) ÂFound 1 MBR signatures
(XEN) ÂFound 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) Â0000000000000000 - 000000000009f800 (usable)
(XEN) Â000000000009f800 - 00000000000a0000 (reserved)
(XEN) Â00000000000dc000 - 0000000000100000 (reserved)
(XEN) Â0000000000100000 - 00000000bfef0000 (usable)
(XEN) Â00000000bfef0000 - 00000000bfeff000 (ACPI data)
(XEN) Â00000000bfeff000 - 00000000bff00000 (ACPI NVS)
(XEN) Â00000000bff00000 - 00000000c0000000 (usable)
(XEN) Â00000000f0000000 - 00000000f8000000 (reserved)
(XEN) Â00000000fec00000 - 00000000fec10000 (reserved)
(XEN) Â00000000fee00000 - 00000000fee01000 (reserved)
(XEN) Â00000000fffe0000 - 0000000100000000 (reserved)
(XEN) Â0000000100000000 - 00000001c0000000 (usable)
(XEN) ACPI: RSDP 000F6A10, 0024 (r2 PTLTD )
(XEN) ACPI: XSDT BFEF030B, 0054 (r1 INTEL Â440BX Â Â 6040000 VMW Â 1324272)
(XEN) ACPI: FACP BFEFEE73, 00F4 (r4 INTEL Â440BX Â Â 6040000 PTL Â Â F4240)
(XEN) ACPI: DSDT BFEF05B1, E8C2 (r1 PTLTD ÂCustom  Â6040000 MSFT Â3000001)
(XEN) ACPI: FACS BFEFFFC0, 0040
(XEN) ACPI: BOOT BFEF0589, 0028 (r1 PTLTD Â$SBFTBL$ Â6040000 ÂLTP Â Â Â Â1)
(XEN) ACPI: APIC BFEF050F, 007A (r1 PTLTD Â APIC Â Â6040000 ÂLTP Â Â Â Â0)
(XEN) ACPI: MCFG BFEF04D3, 003C (r1 PTLTD Â$PCITBL$ Â6040000 ÂLTP Â Â Â Â1)
(XEN) ACPI: SRAT BFEF03C3, 0110 (r2 VMWARE MEMPLUG Â 6040000 VMW Â Â Â Â 1)
(XEN) ACPI: WAET BFEF039B, 0028 (r1 VMWARE VMW WAET Â6040000 VMW Â Â Â Â 1)
(XEN) System RAM: 6143MB (6291004kB)
(XEN) SRAT: PXM 0 -> APIC 00 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 02 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 04 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 06 -> Node 0
(XEN) SRAT: Node 0 PXM 0 0-a0000
(XEN) SRAT: Node 0 PXM 0 100000-10000000
(XEN) SRAT: Node 0 PXM 0 10000000-c0000000
(XEN) SRAT: Node 0 PXM 0 100000000-1c0000000
(XEN) NUMA: Allocated memnodemap from 1bd8fc000 - 1bd8fe000
(XEN) NUMA: Using 8 for the hash shift.
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f6a80
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x1008
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:1004,1:0], pm1x_evt[1:1000,1:0]
(XEN) ACPI: Â Â Â Â Â Â wakeup_vec[bfefffcc], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 6:6 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
(XEN) Processor #2 6:6 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
(XEN) Processor #4 6:6 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
(XEN) Processor #6 6:6 APIC version 21
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) Enabling APIC mode: ÂFlat. Using 1 I/O APICs
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 3 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 24 GSI, 568 MSI/MSI-X
(XEN) Not enabling x2APIC: depends on iommu_supports_eim.
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 6144K
(XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7
(XEN) CPU0: No MCE banks present. Machine check support disabled
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2592.652 MHz processor.
(XEN) Initing memory sharing.
(XEN) alt table ffff82d0802be010 -> ffff82d0802bf384
(XEN) PCI: MCFG configuration 0: base f0000000 segment 0000 buses 00 - 7f
(XEN) PCI: MCFG area at f0000000 reserved in E820
(XEN) PCI: Using MCFG for segment 0000 bus 00-7f
(XEN) I/O virtualisation disabled
(XEN) CPU0: Intel(R) Core(TM) i7-4960HQ CPU @ 2.60GHz stepping 01
(XEN) ENABLING IO-APIC IRQs
(XEN) Â-> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 3.579MHz ACPI PM Timer
(XEN) Allocated console ring of 32 KiB.
(XEN) mwait-idle: MWAIT substates: 0x10
(XEN) mwait-idle: v0.4 model 0x46
(XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) VMX: Supported advanced features:
(XEN) Â- APIC TPR shadow
(XEN) Â- Extended Page Tables (EPT)
(XEN) Â- Virtual-Processor Identifiers (VPID)
(XEN) Â- Virtual NMI
(XEN) Â- MSR direct-access bitmap
(XEN) Â- Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) not detected
(XEN) HVM: PVH mode not supported on this platform
(XEN) CPU 0 APIC 0 -> Node 0
(XEN) CPU 1 APIC 2 -> Node 0
(XEN) Booting processor 1/2 eip 8f000
(XEN) Initializing CPU#1
(XEN) CPU: Physical Processor ID: 2
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 6144K
(XEN) CPU1: No MCE banks present. Machine check support disabled
(XEN) CPU1: Intel(R) Core(TM) i7-4960HQ CPU @ 2.60GHz stepping 01
(XEN) CPU 2 APIC 4 -> Node 0
(XEN) Booting processor 2/4 eip 8f000
(XEN) Initializing CPU#2
(XEN) CPU: Physical Processor ID: 4
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 6144K
(XEN) CPU2: No MCE banks present. Machine check support disabled
(XEN) CPU2: Intel(R) Core(TM) i7-4960HQ CPU @ 2.60GHz stepping 01
(XEN) Brought up 3 CPUs
(XEN) ACPI sleep modes: S3
(XEN) VPMU: disabled
(XEN) Dom0 has maximum 408 PIRQs
(XEN) NX (Execute Disable) protection active
(XEN) *** LOADING DOMAIN 0 ***
(XEN) ÂXen Âkernel: 64-bit, lsb, compat32
(XEN) ÂDom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x3000000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) ÂDom0 alloc.: Â 00000001b4000000->00000001b8000000 (504532 pages to be allocated)
(XEN) ÂInit. ramdisk: 00000001bf2d4000->00000001bffff800
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) ÂLoaded kernel: ffffffff81000000->ffffffff83000000
(XEN) ÂInit. ramdisk: ffffffff83000000->ffffffff83d2b800
(XEN) ÂPhys-Mach map: ffffffff83d2c000->ffffffff8412c000
(XEN) ÂStart info: Â Âffffffff8412c000->ffffffff8412c4b4
(XEN) ÂPage tables: Â ffffffff8412d000->ffffffff84152000
(XEN) ÂBoot stack: Â Âffffffff84152000->ffffffff84153000
(XEN) ÂTOTAL: Â Â Â Â ffffffff80000000->ffffffff84400000
(XEN) ÂENTRY ADDRESS: ffffffff81f991f0
(XEN) Dom0 has maximum 3 VCPUs
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 316kB init memory.
mapping kernel into physical memory
about to get started...

Actually I tried all numbers of CPUs between 2 and 8, and the crash occurs only with 4 or 6 CPUs. Xen boots fine with 2, 3, 5, 7 or 8 CPUs.

Same results with the official 4.6.0 release.

Xen 4.5.1 boots fine on Fusion with any number of CPUs.

Any clues would be appreciated!

--Ed

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.