Re: [Xen-devel] [xen-unstable test] 64494: regressions - FAIL

[Ian Campbell <ian.campbell@xxxxxxxxxx>]

On Thu, 2015-11-19 at 10:50 +0000, Wei Liu wrote:
> On Thu, Nov 19, 2015 at 10:30:30AM +0000, Ian Campbell wrote:
> > On Thu, 2015-11-19 at 11:24 +0100, Juergen Gross wrote:
> > > On 18/11/15 15:49, Wei Liu wrote:
> > > > Hi Juergen
> > > > 
> > > > Looks like there is something we missed after all.
> > > > 
> > > > On Wed, Nov 18, 2015 at 02:31:57PM +0000, osstest service owner
> > > > wrote:
> > > > > flight 64494 xen-unstable real [real]
> > > > > http://logs.test-lab.xenproject.org/osstest/logs/64494/
> > > > > 
> > > > > Regressions :-(
> > > > > 
> > > > > Tests which did not succeed and are blocking,
> > > > > including tests which could not be run:
> > > > 
> > > > > Âtest-amd64-amd64-i386-pvgrub 10 guest-startÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂfail
> > > > > REGR.
> > > > > vs. 64035
> > > > 
> > > > Nov 18 05:11:19.753014 (d2) Bootstrapping...
> > > > Nov 18 05:11:19.769108 (d2) Xen Minimal OS!
> > > > Nov 18 05:11:19.769134 (d2)ÂÂÂstart_info: 0xa13000(VA)
> > > > Nov 18 05:11:19.769158 (d2)ÂÂÂÂÂnr_pages: 0x20000
> > > > Nov 18 05:11:19.777046 (d2)ÂÂÂshared_inf: 0xca1fc000(MA)
> > > > Nov 18 05:11:19.777072 (d2)ÂÂÂÂÂÂpt_base: 0xa16000(VA)
> > > > Nov 18 05:11:19.785042 (d2) nr_pt_frames: 0xb
> > > > Nov 18 05:11:19.785077 (d2)ÂÂÂÂÂmfn_list: 0x993000(VA)
> > > > Nov 18 05:11:19.785108 (d2)ÂÂÂÂmod_start: 0x0(VA)
> > > > Nov 18 05:11:19.785135 (d2)ÂÂÂÂÂÂmod_len: 0
> > > > Nov 18 05:11:19.793047 (d2)ÂÂÂÂÂÂÂÂflags: 0x0
> > > > Nov 18 05:11:19.793077 (d2)ÂÂÂÂÂcmd_line:
> > > > (hd0,0)/boot/grub/menu.lst
> > > > Nov 18 05:11:19.793108 (d2)ÂÂÂÂÂÂÂÂstack: 0x972580-0x992580
> > > > Nov 18 05:11:19.801150 (d2) MM: Init
> > > > Nov 18 05:11:19.801181 (d2)ÂÂÂÂÂÂÂ_text: 0x0(VA)
> > > > Nov 18 05:11:19.801197 (d2)ÂÂÂÂÂÂ_etext: 0x7b22d(VA)
> > > > Nov 18 05:11:19.809104 (d2)ÂÂÂÂ_erodata: 0xa4000(VA)
> > > > Nov 18 05:11:19.809123 (d2)ÂÂÂÂÂÂ_edata: 0xa81a8(VA)
> > > > Nov 18 05:11:19.809138 (d2) stack start: 0x972580(VA)
> > > > Nov 18 05:11:19.817062 (d2)ÂÂÂÂÂÂÂÂ_end: 0x992b30(VA)
> > > > Nov 18 05:11:19.817099 (d2)ÂÂÂstart_pfn: a24
> > > > Nov 18 05:11:19.817125 (d2)ÂÂÂÂÂmax_pfn: 20000
> > > > Nov 18 05:11:19.825037 (d2) Mapping memory range 0x1000000 -
> > > > 0x20000000
> > > > Nov 18 05:11:19.825071 (d2) setting 0x0-0xa4000 readonly
> > > > Nov 18 05:11:19.825100 (d2) skipped 1000
> > > > Nov 18 05:11:19.833049 (d2) MM: Initialise page allocator for
> > > > b1c000(b1c000)-20000000(20000000)
> > > > Nov 18 05:11:19.833089 (d2) Page fault at linear address c00008,
> > > > eip
> > > > 5fc70, regs 0x98ff28, sp b1c000, our_sp 0x98fefc, code 2
> > > > Nov 18 05:11:19.849044 (d2) Page fault in pagetable walk (access to
> > > > invalid memory?).
> > > > 
> > > > The pvgrub in used is 32 bit. 64 bit (which I myself tested) seemed
> > > > to
> > > > be working fine.
> > > 
> > > Okay, I'm hitting this issue, too. I'll investigate further.
> > 
> > Do we want to revert $something in the meantime? If so, what...
> > 
> 
> Given the thorny nature of PV page table construction code I would
> revert the whole series...

Please assume I've forgotten what series that is...

> But let's wait a bit to see if Juergen can come up with a fix for this
> today.

... sure.

Ian.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel