|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v5 05/10] xen/blkfront: negotiate number of queues/rings to be used with backend
The max number of hardware queues for xen/blkfront is set by parameter
'max_queues'(default 4), while it is also capped by the max value that the
xen/blkback exposes through XenStore key 'multi-queue-max-queues'.
The negotiated number is the smaller one and would be written back to xenstore
as "multi-queue-num-queues", blkback needs to read this negotiated number.
Signed-off-by: Bob Liu <bob.liu@xxxxxxxxxx>
---
v2:
* Make 'i' be an unsigned int.
* Other comments from Konrad.
---
drivers/block/xen-blkfront.c | 160 +++++++++++++++++++++++++++++++-----------
1 file changed, 119 insertions(+), 41 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 56c9ec6..84496be 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -99,6 +99,10 @@ static unsigned int xen_blkif_max_segments = 32;
module_param_named(max, xen_blkif_max_segments, int, S_IRUGO);
MODULE_PARM_DESC(max, "Maximum amount of segments in indirect requests
(default is 32)");
+static unsigned int xen_blkif_max_queues = 4;
+module_param_named(max_queues, xen_blkif_max_queues, uint, S_IRUGO);
+MODULE_PARM_DESC(max_queues, "Maximum number of hardware queues/rings used per
virtual disk");
+
/*
* Maximum order of pages to be used for the shared ring between front and
* backend, 4KB page granularity is used.
@@ -118,6 +122,10 @@ MODULE_PARM_DESC(max_ring_page_order, "Maximum order of
pages to be used for the
* characters are enough. Define to 20 to keep consist with backend.
*/
#define RINGREF_NAME_LEN (20)
+/*
+ * queue-%u would take 7 + 10(UINT_MAX) = 17 characters
+ */
+#define QUEUE_NAME_LEN (17)
/*
* Per-ring info.
@@ -823,7 +831,7 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16
sector_size,
memset(&info->tag_set, 0, sizeof(info->tag_set));
info->tag_set.ops = &blkfront_mq_ops;
- info->tag_set.nr_hw_queues = 1;
+ info->tag_set.nr_hw_queues = info->nr_rings;
info->tag_set.queue_depth = BLK_RING_SIZE(info);
info->tag_set.numa_node = NUMA_NO_NODE;
info->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_SG_MERGE;
@@ -1520,6 +1528,53 @@ fail:
return err;
}
+/*
+ * Write out per-ring/queue nodes including ring-ref and event-channel, and
each
+ * ring buffer may have multi pages depending on ->nr_ring_pages.
+ */
+static int write_per_ring_nodes(struct xenbus_transaction xbt,
+ struct blkfront_ring_info *rinfo, const char
*dir)
+{
+ int err;
+ unsigned int i;
+ const char *message = NULL;
+ struct blkfront_info *info = rinfo->dev_info;
+
+ if (info->nr_ring_pages == 1) {
+ err = xenbus_printf(xbt, dir, "ring-ref", "%u",
rinfo->ring_ref[0]);
+ if (err) {
+ message = "writing ring-ref";
+ goto abort_transaction;
+ }
+ } else {
+ for (i = 0; i < info->nr_ring_pages; i++) {
+ char ring_ref_name[RINGREF_NAME_LEN];
+
+ snprintf(ring_ref_name, RINGREF_NAME_LEN, "ring-ref%u",
i);
+ err = xenbus_printf(xbt, dir, ring_ref_name,
+ "%u", rinfo->ring_ref[i]);
+ if (err) {
+ message = "writing ring-ref";
+ goto abort_transaction;
+ }
+ }
+ }
+
+ err = xenbus_printf(xbt, dir, "event-channel", "%u", rinfo->evtchn);
+ if (err) {
+ message = "writing event-channel";
+ goto abort_transaction;
+ }
+
+ return 0;
+
+abort_transaction:
+ xenbus_transaction_end(xbt, 1);
+ if (message)
+ xenbus_dev_fatal(info->xbdev, err, "%s", message);
+
+ return err;
+}
/* Common code used when first setting up, and when resuming. */
static int talk_to_blkback(struct xenbus_device *dev,
@@ -1527,10 +1582,9 @@ static int talk_to_blkback(struct xenbus_device *dev,
{
const char *message = NULL;
struct xenbus_transaction xbt;
- int err, i;
- unsigned int max_page_order = 0;
+ int err;
+ unsigned int i, max_page_order = 0;
unsigned int ring_page_order = 0;
- struct blkfront_ring_info *rinfo;
err = xenbus_scanf(XBT_NIL, info->xbdev->otherend,
"max-ring-page-order", "%u", &max_page_order);
@@ -1542,7 +1596,8 @@ static int talk_to_blkback(struct xenbus_device *dev,
}
for (i = 0; i < info->nr_rings; i++) {
- rinfo = &info->rinfo[i];
+ struct blkfront_ring_info *rinfo = &info->rinfo[i];
+
/* Create shared ring, alloc event channel. */
err = setup_blkring(dev, rinfo);
if (err)
@@ -1556,44 +1611,49 @@ again:
goto destroy_blkring;
}
- if (info->nr_rings == 1) {
- rinfo = &info->rinfo[0];
- if (info->nr_ring_pages == 1) {
- err = xenbus_printf(xbt, dev->nodename,
- "ring-ref", "%u",
rinfo->ring_ref[0]);
- if (err) {
- message = "writing ring-ref";
- goto abort_transaction;
- }
- } else {
- err = xenbus_printf(xbt, dev->nodename,
- "ring-page-order", "%u",
ring_page_order);
- if (err) {
- message = "writing ring-page-order";
- goto abort_transaction;
- }
+ if (info->nr_ring_pages > 1) {
+ err = xenbus_printf(xbt, dev->nodename, "ring-page-order", "%u",
+ ring_page_order);
+ if (err) {
+ message = "writing ring-page-order";
+ goto abort_transaction;
+ }
+ }
- for (i = 0; i < info->nr_ring_pages; i++) {
- char ring_ref_name[RINGREF_NAME_LEN];
+ /* We already got the number of queues/rings in _probe */
+ if (info->nr_rings == 1) {
+ err = write_per_ring_nodes(xbt, &info->rinfo[0], dev->nodename);
+ if (err)
+ goto destroy_blkring;
+ } else {
+ char *path;
+ size_t pathsize;
- snprintf(ring_ref_name, RINGREF_NAME_LEN,
"ring-ref%u", i);
- err = xenbus_printf(xbt, dev->nodename,
ring_ref_name,
- "%u", rinfo->ring_ref[i]);
- if (err) {
- message = "writing ring-ref";
- goto abort_transaction;
- }
- }
- }
- err = xenbus_printf(xbt, dev->nodename,
- "event-channel", "%u", rinfo->evtchn);
+ err = xenbus_printf(xbt, dev->nodename,
"multi-queue-num-queues", "%u",
+ info->nr_rings);
if (err) {
- message = "writing event-channel";
+ message = "writing multi-queue-num-queues";
goto abort_transaction;
}
- } else {
- /* Not supported at this stage. */
- goto abort_transaction;
+
+ pathsize = strlen(dev->nodename) + QUEUE_NAME_LEN;
+ path = kmalloc(pathsize, GFP_KERNEL);
+ if (!path) {
+ err = -ENOMEM;
+ message = "ENOMEM while writing ring references";
+ goto abort_transaction;
+ }
+
+ for (i = 0; i < info->nr_rings; i++) {
+ memset(path, 0, pathsize);
+ snprintf(path, pathsize, "%s/queue-%u", dev->nodename,
i);
+ err = write_per_ring_nodes(xbt, &info->rinfo[i], path);
+ if (err) {
+ kfree(path);
+ goto destroy_blkring;
+ }
+ }
+ kfree(path);
}
err = xenbus_printf(xbt, dev->nodename, "protocol", "%s",
XEN_IO_PROTO_ABI_NATIVE);
@@ -1617,7 +1677,7 @@ again:
for (i = 0; i < info->nr_rings; i++) {
int j;
- rinfo = &info->rinfo[i];
+ struct blkfront_ring_info *rinfo = &info->rinfo[i];
for (j = 0; j < BLK_RING_SIZE(info); j++)
rinfo->shadow[j].req.u.rw.id = j + 1;
@@ -1648,6 +1708,7 @@ static int blkfront_probe(struct xenbus_device *dev,
{
int err, vdevice, r_index;
struct blkfront_info *info;
+ unsigned int backend_max_queues = 0;
/* FIXME: Use dynamic device id if this is not set. */
err = xenbus_scanf(XBT_NIL, dev->nodename,
@@ -1697,7 +1758,18 @@ static int blkfront_probe(struct xenbus_device *dev,
return -ENOMEM;
}
- info->nr_rings = 1;
+ info->xbdev = dev;
+ /* Check if backend supports multiple queues. */
+ err = xenbus_scanf(XBT_NIL, info->xbdev->otherend,
+ "multi-queue-max-queues", "%u", &backend_max_queues);
+ if (err < 0)
+ backend_max_queues = 1;
+
+ info->nr_rings = min(backend_max_queues, xen_blkif_max_queues);
+ /* We need at least one ring. */
+ if (!info->nr_rings)
+ info->nr_rings = 1;
+
info->rinfo = kzalloc(sizeof(struct blkfront_ring_info) *
info->nr_rings, GFP_KERNEL);
if (!info->rinfo) {
xenbus_dev_fatal(dev, -ENOMEM, "allocating ring_info
structure");
@@ -1717,7 +1789,6 @@ static int blkfront_probe(struct xenbus_device *dev,
mutex_init(&info->mutex);
spin_lock_init(&info->dev_lock);
- info->xbdev = dev;
info->vdevice = vdevice;
INIT_LIST_HEAD(&info->grants);
info->connected = BLKIF_STATE_DISCONNECTED;
@@ -2386,6 +2457,7 @@ static struct xenbus_driver blkfront_driver = {
static int __init xlblk_init(void)
{
int ret;
+ int nr_cpus = num_online_cpus();
if (!xen_domain())
return -ENODEV;
@@ -2396,6 +2468,12 @@ static int __init xlblk_init(void)
xen_blkif_max_ring_order = 0;
}
+ if (xen_blkif_max_queues > nr_cpus) {
+ pr_info("Invalid max_queues (%d), will use default max: %d.\n",
+ xen_blkif_max_queues, nr_cpus);
+ xen_blkif_max_queues = nr_cpus;
+ }
+
if (!xen_has_pv_disk_devices())
return -ENODEV;
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |