[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [ovmf baseline-only test] 38237: all pass
This run is configured for baseline tests only. flight 38237 ovmf real [real] http://osstest.xs.citrite.net/~osstest/testlogs/logs/38237/ Perfect :-) All tests in this flight passed version targeted for testing: ovmf df60fb4cc2ca896fcea9e37b06c276d569f1a6b8 baseline version: ovmf 843f8ca01bc195cd077f13512fe285e8db9a3984 Last test of basis 38233 2015-10-31 10:00:14 Z 1 days Testing same since 38237 2015-11-01 21:20:34 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Laszlo Ersek <lersek@xxxxxxxxxx> Michael Kinney <michael.d.kinney@xxxxxxxxx> Nagaraj Hegde <nagaraj-p.hegde@xxxxxxx> jobs: build-amd64-xsm pass build-i386-xsm pass build-amd64 pass build-i386 pass build-amd64-libvirt pass build-i386-libvirt pass build-amd64-pvops pass build-i386-pvops pass test-amd64-amd64-xl-qemuu-ovmf-amd64 pass test-amd64-i386-xl-qemuu-ovmf-amd64 pass ------------------------------------------------------------ sg-report-flight on osstest.xs.citrite.net logs: /home/osstest/logs images: /home/osstest/images Logs, config files, etc. are available at http://osstest.xs.citrite.net/~osstest/testlogs/logs Test harness code can be found at http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary Push not applicable. ------------------------------------------------------------ commit df60fb4cc2ca896fcea9e37b06c276d569f1a6b8 Author: Michael Kinney <michael.d.kinney@xxxxxxxxx> Date: Fri Oct 30 17:53:53 2015 +0000 SourceLevelDebugPkg: DebugAgent: Set Local APIC SoftwareEnable Update DebugAgent to make sure the Local APIC SoftwareEnable bit is set before using the Local APIC Timer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@xxxxxxxxx> Reviewed-by: Hao Wu <hao.a.wu@xxxxxxxxx> Reviewed-by: Jeff Fan <jeff.fan@xxxxxxxxx> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18712 6f19259b-4bc3-4df7-8a09-765794883524 commit 14e4ca25c6199fa29bda7066f31d919197840664 Author: Michael Kinney <michael.d.kinney@xxxxxxxxx> Date: Fri Oct 30 17:53:31 2015 +0000 UefiCpuPkg: LocalApicLib: Add API to set SoftwareEnable bit The LocalApicLib does not provide a function to manage the state of the Local APIC SoftwareEnable bit in the Spurious Vector register. There are cases where this bit needs to be managed without side effects to. other Local APIC registers. One use case is in the DebugAgent in the SourceLevelDebugPkg. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@xxxxxxxxx> Reviewed-by: Hao Wu <hao.a.wu@xxxxxxxxx> Reviewed-by: Jeff Fan <jeff.fan@xxxxxxxxx> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18711 6f19259b-4bc3-4df7-8a09-765794883524 commit 0d4c1db81aab86963536deb8253f35546c4398ea Author: Michael Kinney <michael.d.kinney@xxxxxxxxx> Date: Fri Oct 30 17:32:27 2015 +0000 UefiCpuPkg: CpuDxe: Update GDT to be consistent with DxeIplPeim The PiSmmCpuDxeSmm module makes some assumptions about GDT selectors that are based on the GDT layout from the DxeIplPeim. For example, the protected mode entry code and (where appropriate) the long mode entry code in the UefiCpuPkg/PiSmmCpuDxeSmm/*/MpFuncs.* assembly files, which are used during S3 resume, open-code segment selector values that depend on DxeIplPeim's GDT layout. This updates the CpuDxe module to use the same GDT layout as the DxeIplPeim. This enables modules that are dispatched after CpuDxe to find, and potentially save and restore, a GDT layout that matches that of DxeIplPeim. The DxeIplPeim has a 2 GDT entries for data selectors that are identical. These are LINEAR_SEL (GDT Offset 0x08)and LINEAR_DATA64_SEL (GDT offset 0x30). LINEAL_SEL is used for for IA32 DXE and the LINEAR_DATA64_SEL is used for X64 DXE. This duplicate data selector was added to the CpuDxe module to keep the GDT and all selectors consistent. Using a consistent GDT also improves debug experience. Reported-by: Laszlo Ersek <lersek@xxxxxxxxxx> Analyzed-by: Laszlo Ersek <lersek@xxxxxxxxxx> Link: http://article.gmane.org/gmane.comp.bios.edk2.devel/3568 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@xxxxxxxxx> Reviewed-by: Laszlo Ersek <lersek@xxxxxxxxxx> Tested-by: Laszlo Ersek <lersek@xxxxxxxxxx> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18710 6f19259b-4bc3-4df7-8a09-765794883524 commit cdf8c32ec169db14d4824c659159e2b6b6bed540 Author: Nagaraj Hegde <nagaraj-p.hegde@xxxxxxx> Date: Fri Oct 30 06:47:54 2015 +0000 NetworkPkg: HttpDxe sometimes free a pointer twice In EfiHttpRequest, HostName was getting freed twice whenever HttpTransmitTcp4 failed. Moved FreePool (HostName) after HttpTransmitTcp4 call to avoid a double free. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Nagaraj Hegde <nagaraj-p.hegde@xxxxxxx> Reviewed-by: Samer El-Haj-Mahmoud <elhaj@xxxxxxx> Reviewed-by: Ye Ting <ting.ye@xxxxxxxxx> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18709 6f19259b-4bc3-4df7-8a09-765794883524 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |