[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [xen-4.6-testing baseline-only test] 38211: tolerable FAIL



This run is configured for baseline tests only.

flight 38211 xen-4.6-testing real [real]
http://osstest.xs.citrite.net/~osstest/testlogs/logs/38211/

Failures :-/ but no regressions.

Regressions which are regarded as allowable (not blocking):
 test-amd64-amd64-rumpuserxen-amd64 15 
rumpuserxen-demo-xenstorels/xenstorels.repeat fail like 38132
 test-amd64-i386-rumpuserxen-i386 15 
rumpuserxen-demo-xenstorels/xenstorels.repeat fail like 38132
 test-amd64-amd64-xl-qemut-winxpsp3  9 windows-install          fail like 38132
 test-amd64-amd64-xl-qemuu-winxpsp3  9 windows-install          fail like 38132

Tests which did not succeed, but are not blocking:
 test-armhf-armhf-libvirt-qcow2  9 debian-di-install            fail never pass
 test-armhf-armhf-libvirt-raw  9 debian-di-install            fail   never pass
 test-armhf-armhf-xl-vhd       9 debian-di-install            fail   never pass
 test-amd64-i386-xl-qemut-stubdom-debianhvm-amd64-xsm 9 debian-hvm-install fail 
never pass
 test-armhf-armhf-libvirt     14 guest-saverestore            fail   never pass
 test-armhf-armhf-libvirt     12 migrate-support-check        fail   never pass
 test-armhf-armhf-libvirt-xsm 12 migrate-support-check        fail   never pass
 test-armhf-armhf-libvirt-xsm 14 guest-saverestore            fail   never pass
 test-amd64-amd64-xl-pvh-amd  11 guest-start                  fail   never pass
 test-amd64-amd64-xl-pvh-intel 11 guest-start                  fail  never pass
 test-armhf-armhf-xl-xsm      13 saverestore-support-check    fail   never pass
 test-armhf-armhf-xl-xsm      12 migrate-support-check        fail   never pass
 test-armhf-armhf-xl-credit2  13 saverestore-support-check    fail   never pass
 test-armhf-armhf-xl-credit2  12 migrate-support-check        fail   never pass
 test-armhf-armhf-xl          12 migrate-support-check        fail   never pass
 test-armhf-armhf-xl          13 saverestore-support-check    fail   never pass
 test-armhf-armhf-xl-multivcpu 13 saverestore-support-check    fail  never pass
 test-armhf-armhf-xl-multivcpu 12 migrate-support-check        fail  never pass
 test-armhf-armhf-xl-midway   13 saverestore-support-check    fail   never pass
 test-armhf-armhf-xl-midway   12 migrate-support-check        fail   never pass
 test-amd64-i386-libvirt-xsm  12 migrate-support-check        fail   never pass
 test-amd64-amd64-libvirt-xsm 12 migrate-support-check        fail   never pass
 test-armhf-armhf-xl-rtds     13 saverestore-support-check    fail   never pass
 test-armhf-armhf-xl-rtds     12 migrate-support-check        fail   never pass
 test-amd64-amd64-libvirt     12 migrate-support-check        fail   never pass
 test-amd64-amd64-libvirt-vhd 11 migrate-support-check        fail   never pass
 test-amd64-i386-libvirt      12 migrate-support-check        fail   never pass
 test-amd64-i386-xl-qemuu-win7-amd64 17 guest-stop              fail never pass
 test-amd64-i386-xl-qemut-win7-amd64 17 guest-stop              fail never pass
 test-amd64-amd64-xl-qemuu-win7-amd64 17 guest-stop             fail never pass
 test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check 
fail never pass
 test-amd64-amd64-xl-qemut-win7-amd64 17 guest-stop             fail never pass
 test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check 
fail never pass

version targeted for testing:
 xen                  e4a1dcbfaeb4aa30101b2c9befaca9d460713396
baseline version:
 xen                  b24ad7ba911a9f0688ab179736476e44c52144f1

Last test of basis    38132  2015-10-07 02:16:32 Z   18 days
Testing same since    38211  2015-10-25 19:19:08 Z    0 days    1 attempts

------------------------------------------------------------
People who touched revisions under test:
  Daniel De Graaf <dgdegra@xxxxxxxxxxxxx>
  David Vrabel <david.vrabel@xxxxxxxxxx>
  Fabio Fantoni <fabio.fantoni@xxxxxxx>
  George Dunlap <george.dunlap@xxxxxxxxxx>
  Ian Campbell <ian.campbell@xxxxxxxxxx>
  Jan Beulich <jbeulich@xxxxxxxx>
  Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
  Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
  Wei Liu <wei.liu2@xxxxxxxxxx>
  Yang Zhang <yang.z.zhang@xxxxxxxxx>

jobs:
 build-amd64-xsm                                              pass
 build-armhf-xsm                                              pass
 build-i386-xsm                                               pass
 build-amd64                                                  pass
 build-armhf                                                  pass
 build-i386                                                   pass
 build-amd64-libvirt                                          pass
 build-armhf-libvirt                                          pass
 build-i386-libvirt                                           pass
 build-amd64-prev                                             pass
 build-i386-prev                                              pass
 build-amd64-pvops                                            pass
 build-armhf-pvops                                            pass
 build-i386-pvops                                             pass
 build-amd64-rumpuserxen                                      pass
 build-i386-rumpuserxen                                       pass
 test-amd64-amd64-xl                                          pass
 test-armhf-armhf-xl                                          pass
 test-amd64-i386-xl                                           pass
 test-amd64-amd64-xl-qemut-debianhvm-amd64-xsm                pass
 test-amd64-i386-xl-qemut-debianhvm-amd64-xsm                 pass
 test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm           pass
 test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm            pass
 test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm                pass
 test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm                 pass
 test-amd64-amd64-xl-qemut-stubdom-debianhvm-amd64-xsm        pass
 test-amd64-i386-xl-qemut-stubdom-debianhvm-amd64-xsm         fail
 test-amd64-amd64-libvirt-xsm                                 pass
 test-armhf-armhf-libvirt-xsm                                 fail
 test-amd64-i386-libvirt-xsm                                  pass
 test-amd64-amd64-xl-xsm                                      pass
 test-armhf-armhf-xl-xsm                                      pass
 test-amd64-i386-xl-xsm                                       pass
 test-amd64-amd64-xl-pvh-amd                                  fail
 test-amd64-i386-qemut-rhel6hvm-amd                           pass
 test-amd64-i386-qemuu-rhel6hvm-amd                           pass
 test-amd64-amd64-xl-qemut-debianhvm-amd64                    pass
 test-amd64-i386-xl-qemut-debianhvm-amd64                     pass
 test-amd64-amd64-xl-qemuu-debianhvm-amd64                    pass
 test-amd64-i386-xl-qemuu-debianhvm-amd64                     pass
 test-amd64-i386-freebsd10-amd64                              pass
 test-amd64-amd64-xl-qemuu-ovmf-amd64                         pass
 test-amd64-i386-xl-qemuu-ovmf-amd64                          pass
 test-amd64-amd64-rumpuserxen-amd64                           fail
 test-amd64-amd64-xl-qemut-win7-amd64                         fail
 test-amd64-i386-xl-qemut-win7-amd64                          fail
 test-amd64-amd64-xl-qemuu-win7-amd64                         fail
 test-amd64-i386-xl-qemuu-win7-amd64                          fail
 test-amd64-amd64-xl-credit2                                  pass
 test-armhf-armhf-xl-credit2                                  pass
 test-amd64-i386-freebsd10-i386                               pass
 test-amd64-i386-rumpuserxen-i386                             fail
 test-amd64-amd64-xl-pvh-intel                                fail
 test-amd64-i386-qemut-rhel6hvm-intel                         pass
 test-amd64-i386-qemuu-rhel6hvm-intel                         pass
 test-amd64-amd64-libvirt                                     pass
 test-armhf-armhf-libvirt                                     fail
 test-amd64-i386-libvirt                                      pass
 test-armhf-armhf-xl-midway                                   pass
 test-amd64-amd64-migrupgrade                                 pass
 test-amd64-i386-migrupgrade                                  pass
 test-amd64-amd64-xl-multivcpu                                pass
 test-armhf-armhf-xl-multivcpu                                pass
 test-amd64-amd64-pair                                        pass
 test-amd64-i386-pair                                         pass
 test-amd64-amd64-libvirt-pair                                pass
 test-amd64-i386-libvirt-pair                                 pass
 test-amd64-amd64-amd64-pvgrub                                pass
 test-amd64-amd64-i386-pvgrub                                 pass
 test-amd64-amd64-pygrub                                      pass
 test-armhf-armhf-libvirt-qcow2                               fail
 test-amd64-amd64-xl-qcow2                                    pass
 test-armhf-armhf-libvirt-raw                                 fail
 test-amd64-i386-xl-raw                                       pass
 test-amd64-amd64-xl-rtds                                     pass
 test-armhf-armhf-xl-rtds                                     pass
 test-amd64-i386-xl-qemut-winxpsp3-vcpus1                     pass
 test-amd64-i386-xl-qemuu-winxpsp3-vcpus1                     pass
 test-amd64-amd64-libvirt-vhd                                 pass
 test-armhf-armhf-xl-vhd                                      fail
 test-amd64-amd64-xl-qemut-winxpsp3                           fail
 test-amd64-i386-xl-qemut-winxpsp3                            pass
 test-amd64-amd64-xl-qemuu-winxpsp3                           fail
 test-amd64-i386-xl-qemuu-winxpsp3                            pass


------------------------------------------------------------
sg-report-flight on osstest.xs.citrite.net
logs: /home/osstest/logs
images: /home/osstest/images

Logs, config files, etc. are available at
    http://osstest.xs.citrite.net/~osstest/testlogs/logs

Test harness code can be found at
    http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary


Push not applicable.

------------------------------------------------------------
commit e4a1dcbfaeb4aa30101b2c9befaca9d460713396
Author: Ian Campbell <ian.campbell@xxxxxxxxxx>
Date:   Tue Oct 6 09:42:35 2015 +0100

    docs: xl.cfg: permissive option is not PV only.

    Since XSA-131 qemu-xen has defaulted to non-permissive mode and the
    option was extended to cover that case in 015a373351e5 "tools: libxl:
    allow permissive qemu-upstream pci passthrough".

    Since I was rewrapping to adjust the text anyway I've split the safety
    warning into a separate paragraph to make it more obvious.

    Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
    Cc: Eric <epretorious@xxxxxxxxx>
    Acked-by: Wei Liu <wei.liu2@xxxxxxxxxx>
    (cherry picked from commit 7f25baba1c0942e50757f4ecb233202dbbc057b9)

commit 2a5921e557f534a569b22268ebdb58dbc29a30a0
Author: David Vrabel <david.vrabel@xxxxxxxxxx>
Date:   Mon Aug 3 12:29:19 2015 +0100

    arm: reduce power use by contented spin locks with WFE/SEV

    Instead of cpu_relax() while spinning and observing the ticket head,
    introduce arch_lock_relax() which executes a WFE instruction.  After
    the ticket head is changed call arch_lock_signal() to execute an SEV
    instruction (with the required DSB first) to wake any spinners.

    This should improve power consumption when locks are contented and
    spinning.

    For consistency also move arch_lock_(acquire|release)_barrier to
    asm/spinlock.h.

    Booted the result on arm32 (Midway) and arm64 (Mustang). Build test
    only on amd64.

    Signed-off-by: David Vrabel <david.vrabel@xxxxxxxxxx>
    [ijc: add barrier, rename as arch_lock_*, move arch_lock_*_barrier, test]
    Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
    Cc: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
    Cc: Jan Beulich <jbeulich@xxxxxxxx>
    Cc: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Acked-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>

    (cherry picked from commit e625faf45ee1349be7da2b27e38567e01ce4b453)

commit 83bd6ba0b5dffa4e54a5b57ff0d62bf7c5d646b9
Author: Jan Beulich <jbeulich@xxxxxxxx>
Date:   Wed Oct 21 17:42:51 2015 +0200

    x86/NUMA: fix SRAT table processor entry parsing and consumption

    - don't overrun apicid_to_node[] (possible in the x2APIC case)
    - don't limit number of processor related SRAT entries we can consume
    - make acpi_numa_{processor,x2apic}_affinity_init() as similar to one
      another as possible
    - print APIC IDs in hex (to ease matching with other log messages), at
      once making legacy and x2APIC ones distinguishable (by width)

    Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
    Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    master commit: 83281fc9b31396e94c0bfb6550b75c165037a0ad
    master date: 2015-10-14 12:46:27 +0200

commit 674c1f884b294751bcaf4ba4066d220244f4de0e
Author: Jan Beulich <jbeulich@xxxxxxxx>
Date:   Wed Oct 21 17:41:59 2015 +0200

    x86: hide MWAITX from PV domains

    Since MWAIT is hidden too. (Linux starting with 4.3 is making use of
    that feature, and is checking for it without looking at the MWAIT one.)

    Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
    Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    master commit: 941cd44324db7eddc46cba4596fa13d505066ccf
    master date: 2015-10-13 17:17:52 +0200

commit 62d9e74a593a336a4f0451d7c5cd2a4f223c6298
Author: Wei Liu <wei.liu2@xxxxxxxxxx>
Date:   Wed Oct 21 17:41:11 2015 +0200

    build: don't shadow debug with "@debug@" in tools build

    In 16181cbb (tools: Honor Config.mk debug value, rather than setting our
    own), configure doesn't set debug variable anymore. There is, however,
    one place that was missed. The file config/Tools.mk.in was still
    expecting a @debug@ value from configure. After 16181cbb that value
    remained "debug := @debug@" all the time because configure didn't
    substitute it.

    The consequence was that we couldn't get a debug build even if debug was
    set to "y" in Config.mk.

    Fix this by removing the stray line "debug := @debug@" in Tools.mk.in.

    Reported-by: Fabio Fantoni <fabio.fantoni@xxxxxxx>
    Signed-off-by: Wei Liu <wei.liu2@xxxxxxxxxx>
    Tested-by: Fabio Fantoni <fabio.fantoni@xxxxxxx>
    Acked-by: George Dunlap <george.dunlap@xxxxxxxxxx>
    master commit: 973ce7bd8fb1513dcc5ff04760e03915a9eccd08
    master date: 2015-10-12 16:02:53 +0200

commit 9aab62a8ad005aa21fb4aab916ca340d8f14a59a
Author: Jan Beulich <jbeulich@xxxxxxxx>
Date:   Wed Oct 21 17:40:43 2015 +0200

    VT-d: don't suppress invalidation address write when it is zero

    GFN zero is a valid address, and hence may need invalidation done for
    it just like for any other GFN.

    Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
    Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Acked-by: Yang Zhang <yang.z.zhang@xxxxxxxxx>
    master commit: 710942e57fb42ff8f344ca82f6b678f67e38ae63
    master date: 2015-10-12 15:58:35 +0200

commit 60a466559004b84d65805775116ac6960bf0235a
Author: Jan Beulich <jbeulich@xxxxxxxx>
Date:   Wed Oct 21 17:40:02 2015 +0200

    x86/PV: properly populate descriptor tables

    Us extending the GDT limit past the Xen descriptors so far meant that
    guests (including user mode programs) accessing any descriptor table
    slot above the original OS'es limit but below the first Xen descriptor
    caused a #PF, converted to a #GP in our #PF handler. Which is quite
    different from the native behavior, where some of such accesses (LAR
    and LSL) don't fault. Mimic that behavior by mapping a blank page into
    unused slots.

    While not strictly required, treat the LDT the same for consistency.

    Reported-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
    Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    master commit: cf6d39f81992c29a637c603dbabf1e21a0ea563f
    master date: 2015-09-25 09:05:29 +0200

commit 193aaaaff3aedd31bc1046af262533b859d7e582
Author: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
Date:   Wed Oct 21 17:39:37 2015 +0200

    xen/xsm: Make p->policyvers be a local variable (ver) to shut up GCC 5.1.1 
warnings.

    policydb.c: In function â??user_readâ??:
    policydb.c:1443:26: error: â??buf[2]â?? may be used uninitialized in this 
function [-Werror=maybe-uninitialized]
             usrdatum->bounds = le32_to_cpu(buf[2]);
                              ^
    cc1: all warnings being treated as errors

    Which (as Andrew mentioned) is because GCC cannot assume
    that 'p->policyvers' has the same value between checks.

    We make it local, optimize the name to 'ver' and the warnings go away.
    We also update another call site with this modification to
    make it more inline with the rest of the functions.

    Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
    Acked-by: Daniel De Graaf <dgdegra@xxxxxxxxxxxxx>
    master commit: 6a2f81459e1455d65a9a6f78dd2a0d0278619680
    master date: 2015-09-22 12:09:03 -0400

commit be6ce1e2b8e61bd3584da7342b309c589dfd97ea
Author: Jan Beulich <jbeulich@xxxxxxxx>
Date:   Wed Oct 21 17:37:30 2015 +0200

    update Xen version to 4.6.1-pre
(qemu changes not included)

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.