|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v2 2/2] block/xen-blkfront: Handle non-indirect grant with 64KB pages
The minimal size of request in the block framework is always PAGE_SIZE. It means that when 64KB guest is support, the request will at least be 64KB. Although, if the backend doesn't support indirect descriptor (such as QDISK in QEMU), a ring request is only able to accommodate 11 segments of 4KB (i.e 44KB). The current frontend is assuming that an I/O request will always fit in a ring request. This is not true any more when using 64KB page granularity and will therefore crash during boot. On ARM64, the ABI is completely neutral to the page granularity used by the domU. The guest has the choice between different page granularity supported by the processors (for instance on ARM64: 4KB, 16KB, 64KB). This can't be enforced by the hypervisor and therefore it's possible to run guests using different page granularity. So we can't mandate the block backend to support indirect descriptor when the frontend is using 64KB page granularity and have to fix it properly in the frontend. The solution exposed below is based on modifying directly the frontend guest rather than asking the block framework to support smaller size (i.e < PAGE_SIZE). This is because the change is the block framework are not trivial as everything seems to relying on a struct *page (see [1]). Although, it may be possible that someone succeed to do it in the future and we would therefore be able to use it. Given that a block request may not fit in a single ring request, a second request is introduced for the data that cannot fit in the first one. This means that the second ring request should never be used on Linux if the page size is smaller than 44KB. To achieve the support of the extra ring request, the block queue size is divided by two. Therefore, the ring will always contain enough space to accommodate 2 ring requests. While this will reduce the overall performance, it will make the implementation more contained. The way forward to get better performance is to implement in the backend either indirect descriptor or multiple grants ring. Note that the parameters blk_queue_max_* helpers haven't been updated. The block code will set the mimimum size supported and we may be able to support directly any change in the block framework that lower down the minimal size of a request. [1] http://lists.xen.org/archives/html/xen-devel/2015-08/msg02200.html Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx> --- Cc: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> Cc: "Roger Pau MonnÃ" <roger.pau@xxxxxxxxxx> Cc: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx> Cc: David Vrabel <david.vrabel@xxxxxxxxxx> Changes in v2: - Update the commit message - Typoes - Rename ring_req2/id2 to extra_ring_req/extra_id --- drivers/block/xen-blkfront.c | 200 +++++++++++++++++++++++++++++++++++++++---- 1 file changed, 184 insertions(+), 16 deletions(-) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 5982768..8ea2c97 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -60,6 +60,20 @@ #include <asm/xen/hypervisor.h> +/* + * The minimal size of segment supportd by the block framework is PAGE_SIZE. + * When Linux is using a different page size than xen, it may not be possible + * to put all the data in a single segment. + * This can happen when the backend doesn't support indirect descriptor and + * therefore the maximum amount of data that a request can carry is + * BLKIF_MAX_SEGMENTS_PER_REQUEST * XEN_PAGE_SIZE = 44KB + * + * Note that we only support one extra request. So the Linux page size + * should be <= ( 2 * BLKIF_MAX_SEGMENTS_PER_REQUEST * XEN_PAGE_SIZE) = + * 88KB. + */ +#define HAS_EXTRA_REQ (BLKIF_MAX_SEGMENTS_PER_REQUEST < XEN_PFN_PER_PAGE) + enum blkif_state { BLKIF_STATE_DISCONNECTED, BLKIF_STATE_CONNECTED, @@ -79,6 +93,18 @@ struct blk_shadow { struct grant **indirect_grants; struct scatterlist *sg; unsigned int num_sg; + enum { + REQ_WAITING, + REQ_DONE, + REQ_FAIL + } status; + + #define NO_ASSOCIATED_ID ~0UL + /* + * Id of the sibling if we ever need 2 requests when handling a + * block I/O request + */ + unsigned long associated_id; }; struct split_bio { @@ -467,6 +493,8 @@ static unsigned long blkif_ring_get_request(struct blkfront_info *info, id = get_id_from_freelist(info); info->shadow[id].request = req; + info->shadow[id].status = REQ_WAITING; + info->shadow[id].associated_id = NO_ASSOCIATED_ID; (*ring_req)->u.rw.id = id; @@ -508,6 +536,9 @@ struct setup_rw_req { bool need_copy; unsigned int bvec_off; char *bvec_data; + + bool require_extra_req; + struct blkif_request *extra_ring_req; }; static void blkif_setup_rw_req_grant(unsigned long gfn, unsigned int offset, @@ -521,8 +552,24 @@ static void blkif_setup_rw_req_grant(unsigned long gfn, unsigned int offset, unsigned int grant_idx = setup->grant_idx; struct blkif_request *ring_req = setup->ring_req; struct blkfront_info *info = setup->info; + /* + * We always use the shadow of the first request to store the list + * of grant associated to the block I/O request. This made the + * completion more easy to handle even if the block I/O request is + * split. + */ struct blk_shadow *shadow = &info->shadow[setup->id]; + if (unlikely(setup->require_extra_req && + grant_idx >= BLKIF_MAX_SEGMENTS_PER_REQUEST)) { + /* + * We are using the second request, setup grant_idx + * to be the index of the segment array + */ + grant_idx -= BLKIF_MAX_SEGMENTS_PER_REQUEST; + ring_req = setup->extra_ring_req; + } + if ((ring_req->operation == BLKIF_OP_INDIRECT) && (grant_idx % GRANTS_PER_INDIRECT_FRAME == 0)) { if (setup->segments) @@ -537,7 +584,11 @@ static void blkif_setup_rw_req_grant(unsigned long gfn, unsigned int offset, gnt_list_entry = get_grant(&setup->gref_head, gfn, info); ref = gnt_list_entry->gref; - shadow->grants_used[grant_idx] = gnt_list_entry; + /* + * All the grants are stored in the shadow of the first + * request. Therefore we have to use the global index + */ + shadow->grants_used[setup->grant_idx] = gnt_list_entry; if (setup->need_copy) { void *shared_data; @@ -579,11 +630,31 @@ static void blkif_setup_rw_req_grant(unsigned long gfn, unsigned int offset, (setup->grant_idx)++; } +static void blkif_setup_extra_req(struct blkif_request *first, + struct blkif_request *second) +{ + uint16_t nr_segments = first->u.rw.nr_segments; + + /* + * The second request is only present when the first request uses + * all its segments. It's always the continuity of the first one. + */ + first->u.rw.nr_segments = BLKIF_MAX_SEGMENTS_PER_REQUEST; + + second->u.rw.nr_segments = nr_segments - BLKIF_MAX_SEGMENTS_PER_REQUEST; + second->u.rw.sector_number = first->u.rw.sector_number + + (BLKIF_MAX_SEGMENTS_PER_REQUEST * XEN_PAGE_SIZE) / 512; + + second->u.rw.handle = first->u.rw.handle; + second->operation = first->operation; +} + static int blkif_queue_rw_req(struct request *req) { struct blkfront_info *info = req->rq_disk->private_data; - struct blkif_request *ring_req; - unsigned long id; + struct blkif_request *ring_req, *extra_ring_req = NULL; + unsigned long id, extra_id = NO_ASSOCIATED_ID; + bool require_extra_req = false; int i; struct setup_rw_req setup = { .grant_idx = 0, @@ -628,19 +699,19 @@ static int blkif_queue_rw_req(struct request *req) /* Fill out a communications ring structure. */ id = blkif_ring_get_request(info, req, &ring_req); - BUG_ON(info->max_indirect_segments == 0 && - GREFS(req->nr_phys_segments) > BLKIF_MAX_SEGMENTS_PER_REQUEST); - BUG_ON(info->max_indirect_segments && - GREFS(req->nr_phys_segments) > info->max_indirect_segments); - num_sg = blk_rq_map_sg(req->q, req, info->shadow[id].sg); num_grant = 0; /* Calculate the number of grant used */ for_each_sg(info->shadow[id].sg, sg, num_sg, i) num_grant += gnttab_count_grant(sg->offset, sg->length); + require_extra_req = info->max_indirect_segments == 0 && + num_grant > BLKIF_MAX_SEGMENTS_PER_REQUEST; + BUG_ON(!HAS_EXTRA_REQ && require_extra_req); + info->shadow[id].num_sg = num_sg; - if (num_grant > BLKIF_MAX_SEGMENTS_PER_REQUEST) { + if (num_grant > BLKIF_MAX_SEGMENTS_PER_REQUEST && + likely(!require_extra_req)) { /* * The indirect operation can only be a BLKIF_OP_READ or * BLKIF_OP_WRITE @@ -680,10 +751,30 @@ static int blkif_queue_rw_req(struct request *req) } } ring_req->u.rw.nr_segments = num_grant; + if (unlikely(require_extra_req)) { + extra_id = blkif_ring_get_request(info, req, + &extra_ring_req); + /* + * Only the first request contains the scatter-gather + * list. + */ + info->shadow[extra_id].num_sg = 0; + + blkif_setup_extra_req(ring_req, extra_ring_req); + + /* Link the 2 requests together */ + info->shadow[extra_id].associated_id = id; + info->shadow[id].associated_id = extra_id; + } } setup.ring_req = ring_req; setup.id = id; + + setup.require_extra_req = require_extra_req; + if (unlikely(require_extra_req)) + setup.extra_ring_req = extra_ring_req; + for_each_sg(info->shadow[id].sg, sg, num_sg, i) { BUG_ON(sg->offset + sg->length > PAGE_SIZE); @@ -706,6 +797,8 @@ static int blkif_queue_rw_req(struct request *req) /* Keep a private copy so we can reissue requests when recovering. */ info->shadow[id].req = *ring_req; + if (unlikely(require_extra_req)) + info->shadow[extra_id].req = *extra_ring_req; if (new_persistent_gnts) gnttab_free_grant_references(setup.gref_head); @@ -797,7 +890,16 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size, memset(&info->tag_set, 0, sizeof(info->tag_set)); info->tag_set.ops = &blkfront_mq_ops; info->tag_set.nr_hw_queues = 1; - info->tag_set.queue_depth = BLK_RING_SIZE(info); + if (HAS_EXTRA_REQ && info->max_indirect_segments == 0) { + /* + * When indirect descriptior is not supported, the I/O request + * will be split between multiple request in the ring. + * To avoid problems when sending the request, divide by + * 2 the depth of the queue. + */ + info->tag_set.queue_depth = BLK_RING_SIZE(info) / 2; + } else + info->tag_set.queue_depth = BLK_RING_SIZE(info); info->tag_set.numa_node = NUMA_NO_NODE; info->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_SG_MERGE; info->tag_set.cmd_size = 0; @@ -1217,19 +1319,67 @@ static void blkif_copy_from_grant(unsigned long gfn, unsigned int offset, kunmap_atomic(shared_data); } -static void blkif_completion(struct blk_shadow *s, struct blkfront_info *info, +static bool blkif_completion(unsigned long *id, struct blkfront_info *info, struct blkif_response *bret) { int i = 0; struct scatterlist *sg; int num_sg, num_grant; + struct blk_shadow *s = &info->shadow[*id]; struct copy_from_grant data = { - .s = s, .grant_idx = 0, }; num_grant = s->req.operation == BLKIF_OP_INDIRECT ? s->req.u.indirect.nr_segments : s->req.u.rw.nr_segments; + + /* The I/O request may be split in two */ + if (unlikely(s->associated_id != NO_ASSOCIATED_ID)) { + struct blk_shadow *s2 = &info->shadow[s->associated_id]; + + /* Keep the status of the current response in shadow */ + s->status = (bret->status == BLKIF_RSP_OKAY) ? + REQ_DONE : REQ_FAIL; + + /* Wait the second response if not yet here */ + if (s2->status == REQ_WAITING) + return 0; + + /* + * The status of the current response will be used in + * order to know if the request has failed. + * Update the current response status only if has not + * failed. + */ + if (bret->status == BLKIF_RSP_OKAY && s2->status == REQ_FAIL) + bret->status = BLKIF_RSP_ERROR; + + /* + * All the grants is stored in the first shadow in order + * to make the completion code simpler. + */ + num_grant += s2->req.u.rw.nr_segments; + + /* + * The two responses may not come in order. Only the + * first request will store the scatter-gather list + */ + if (s2->num_sg != 0) { + /* Update "id" with the ID of the first response */ + *id = s->associated_id; + s = s2; + } + + /* + * We don't need anymore the second request, so recycling + * it now. + */ + if (add_id_to_freelist(info, s->associated_id)) + WARN(1, "%s: can't recycle the second part (id = %ld) of the request\n", + info->gd->disk_name, s->associated_id); + } + + data.s = s; num_sg = s->num_sg; if (bret->operation == BLKIF_OP_READ && info->feature_persistent) { @@ -1299,6 +1449,8 @@ static void blkif_completion(struct blk_shadow *s, struct blkfront_info *info, } } } + + return 1; } static irqreturn_t blkif_interrupt(int irq, void *dev_id) @@ -1339,8 +1491,14 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id) } req = info->shadow[id].request; - if (bret->operation != BLKIF_OP_DISCARD) - blkif_completion(&info->shadow[id], info, bret); + if (bret->operation != BLKIF_OP_DISCARD) { + /* + * We may need to wait for an extra response if the + * I/O request is split in 2 + */ + if (!blkif_completion(&id, info, bret)) + continue; + } if (add_id_to_freelist(info, id)) { WARN(1, "%s: response to %s (id %ld) couldn't be recycled!\n", @@ -1863,8 +2021,18 @@ static int blkfront_setup_indirect(struct blkfront_info *info) unsigned int psegs, grants; int err, i; - if (info->max_indirect_segments == 0) - grants = BLKIF_MAX_SEGMENTS_PER_REQUEST; + if (info->max_indirect_segments == 0) { + if (!HAS_EXTRA_REQ) + grants = BLKIF_MAX_SEGMENTS_PER_REQUEST; + else { + /* + * When an extra req is required, the maximum + * grants supported is related to the size of the + * Linux block segment + */ + grants = GRANTS_PER_PSEG; + } + } else grants = info->max_indirect_segments; psegs = grants / GRANTS_PER_PSEG; -- 2.1.4 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |