[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v3 9/9] xen/blkback: get number of hardware queues/rings from blkfront



El 05/09/15 a les 14.39, Bob Liu ha escrit:
> Backend advertises "multi-queue-max-queues" to front, and then read back the
> final negotiated queues/rings from "multi-queue-num-queues" which is wrote by
> blkfront.
> 
> Signed-off-by: Bob Liu <bob.liu@xxxxxxxxxx>
> ---
>  drivers/block/xen-blkback/blkback.c |    8 ++++++++
>  drivers/block/xen-blkback/xenbus.c  |   36 
> ++++++++++++++++++++++++++++++-----
>  2 files changed, 39 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/block/xen-blkback/blkback.c 
> b/drivers/block/xen-blkback/blkback.c
> index fd02240..b904fe05f0 100644
> --- a/drivers/block/xen-blkback/blkback.c
> +++ b/drivers/block/xen-blkback/blkback.c
> @@ -83,6 +83,11 @@ module_param_named(max_persistent_grants, 
> xen_blkif_max_pgrants, int, 0644);
>  MODULE_PARM_DESC(max_persistent_grants,
>                   "Maximum number of grants to map persistently");
>  
> +unsigned int xenblk_max_queues;
> +module_param_named(max_queues, xenblk_max_queues, uint, 0644);
> +MODULE_PARM_DESC(max_queues,
> +              "Maximum number of hardware queues per virtual disk");
> +
>  /*
>   * Maximum order of pages to be used for the shared ring between front and
>   * backend, 4KB page granularity is used.
> @@ -1458,6 +1463,9 @@ static int __init xen_blkif_init(void)
>               xen_blkif_max_ring_order = XENBUS_MAX_RING_PAGE_ORDER;
>       }
>  
> +     /* Allow as many queues as there are CPUs, by default */
> +     xenblk_max_queues = num_online_cpus();

Hm, I'm not sure of the best way to set a default value for this.
Consider for example a scenario were Dom0 is limited to 2vCPUs, but DomU
has 8 vCPUs. Are we going to limit the number of queues to two? Is that
the most appropriate value from a performance PoV?

I have to admit I don't have a clear idea of a default value for this
field, and maybe the number of CPUs on the backend is indeed what works
better, but there needs to be a comment explaining the reasoning behind
this setting.

>       rc = xen_blkif_interface_init();
>       if (rc)
>               goto failed_init;
> diff --git a/drivers/block/xen-blkback/xenbus.c 
> b/drivers/block/xen-blkback/xenbus.c
> index 04b8d0d..aa97ea5 100644
> --- a/drivers/block/xen-blkback/xenbus.c
> +++ b/drivers/block/xen-blkback/xenbus.c
> @@ -28,6 +28,8 @@
>  #define RINGREF_NAME_LEN (20)
>  #define RINGREF_NAME_LEN (20)
>  
> +extern unsigned int xenblk_max_queues;

This should live in blkback/common.h

> +
>  struct backend_info {
>       struct xenbus_device    *dev;
>       struct xen_blkif        *blkif;
> @@ -191,11 +193,6 @@ static struct xen_blkif *xen_blkif_alloc(domid_t domid)
>       atomic_set(&blkif->drain, 0);
>       INIT_WORK(&blkif->free_work, xen_blkif_deferred_free);
>  
> -     blkif->nr_rings = 1;
> -     if (xen_blkif_alloc_rings(blkif)) {
> -             kmem_cache_free(xen_blkif_cachep, blkif);
> -             return ERR_PTR(-ENOMEM);
> -     }
>       return blkif;
>  }
>  
> @@ -618,6 +615,14 @@ static int xen_blkbk_probe(struct xenbus_device *dev,
>               goto fail;
>       }
>  
> +     /* Multi-queue: wrte how many queues backend supported. */
                        ^ write how many queues are supported by the
backend.
> +     err = xenbus_printf(XBT_NIL, dev->nodename,
> +                         "multi-queue-max-queues", "%u", xenblk_max_queues);
> +     if (err) {
> +             pr_debug("Error writing multi-queue-num-queues\n");
                ^ pr_warn at least.
> +             goto fail;
> +     }
> +
>       /* setup back pointer */
>       be->blkif->be = be;
>  
> @@ -1008,6 +1013,7 @@ static int connect_ring(struct backend_info *be)
>       char *xspath;
>       size_t xspathsize;
>       const size_t xenstore_path_ext_size = 11; /* sufficient for 
> "/queue-NNN" */
> +     unsigned int requested_num_queues = 0;
>  
>       pr_debug("%s %s\n", __func__, dev->otherend);
>  
> @@ -1035,6 +1041,26 @@ static int connect_ring(struct backend_info *be)
>       be->blkif->vbd.feature_gnt_persistent = pers_grants;
>       be->blkif->vbd.overflow_max_grants = 0;
>  
> +     /*
> +      * Read the number of hardware queus from frontend.
                                       ^ queues
> +      */
> +     err = xenbus_scanf(XBT_NIL, dev->otherend, "multi-queue-num-queues", 
> "%u", &requested_num_queues);
> +     if (err < 0) {
> +             requested_num_queues = 1;
> +     } else {
> +             if (requested_num_queues > xenblk_max_queues
> +                 || requested_num_queues == 0) {
> +                     /* buggy or malicious guest */
> +                     xenbus_dev_fatal(dev, err,
> +                                     "guest requested %u queues, exceeding 
> the maximum of %u.",
> +                                     requested_num_queues, 
> xenblk_max_queues);
> +                     return -1;
> +             }
> +     }
> +     be->blkif->nr_rings = requested_num_queues;
> +     if (xen_blkif_alloc_rings(be->blkif))
> +             return -ENOMEM;
> +
>       pr_info("nr_rings:%d protocol %d (%s) %s\n", be->blkif->nr_rings,
>                be->blkif->blk_protocol, protocol,
>                pers_grants ? "persistent grants" : "");
> 


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.